Professional Documents
Culture Documents
Anilox Roller Condition VS Standard
Anilox Roller Condition VS Standard
Roller Frequency of
Condition Use Remarks Recommendation
QUANTI ANILOX BLADE ACTUAL DFW ACTUAL DFW ACTUAL DFW ACTUAL DFW
TY (PCS) ROLLER # USED LACQUER CODE TARGET DFW
MIN MAX MIN MAX MIN MAX MIN MAX
Thin PPG 2004 821B 5.0 - 6.0 GSM 5.8 6.5 5.5 6.4 4.0 4.7 Seldom Used for double
Off-standard pass
For Purchase of 2
2 11 DFW
Issue on anilox spares
application
Thin MR-1504-04 6.5 - 7.5 GSM 6.7 7.8 Not Used cellmarks with
gray lacquer
Thin VALSPAR 15S18MA-1 5.0 - 6.0 GSM 5.2 5.9 4.7 5.6 4.2 5.1 Seldom Used for double
pass
For Purchase of 1
1 14 Thin PPG 2004 821B 4.0 - 5.0 GSM 4.2 5.2 OK Not Used
Not utilized due spare
to Low DFW
application For Purchase of 1
1 18 Thin PPG 2004 821B 4.0 - 4.5 GSM 4.3 4.9 OK Not Used spare
Thin XUG400 3.0 - 4.0 GSM 2.9 3.9 OK Not Used Recoating are For Purchase of 1
1 22 not usually run spare
Thin PPG 2004 821B 3.0 - 4.0 GSM OK Not Used on line 1
RECOMMENDATION: Inquire from Supplier if there's available #6 or #7 anilox rollers for higher lacquer application.