Professional Documents
Culture Documents
Truck Adjuster Dis
Truck Adjuster Dis
Op nbr 00000
ПРЕДУПРЕЖДЕНИЕ
A great force is applied to the spring package. Pay special attention when disassembling.
1. Remove screw (11), plate (10), and grease valve (4) from piston (3), in order.
2. Remove piston (3), seal (9), back–up ring (8), and packing (7) from cylinder (1), in order.
Figure 1
Grease valve, removal
ПРЕДУПРЕЖДЕНИЕ
Use special tools for safety. While compressing or releasing the spring by press, take care that the spring does not slip
out.
4. Slowly compress spring (2) to with press (a). Remove screw (15) and lock plate (14) connected to rod (17).
5. Remove nut (6). Remove yoke (5) and spring (2) while releasing the load applied to spring (2).
Figure 2
Screw and lock plate, removal
Figure 3
Screw and rod, removal
7. Confirm that there is no damage or rust on the inner side of the cylinder and the outer side of the piston.