Professional Documents
Culture Documents
Boq
Boq
FOR
2023-2024
Sl no Description Qty Unit Rate Amount
1.00 Civil works :
2.00 Auditorium Building :
Earth work in excavation of foundation trenches in all kinds of soil
including moorum, stoney earth and earth mixed with boulders except
sheet rock and boulders not requiring blasting including dressing of
sides and leveling the bed upto the required depth and depositing the
excavated materials away from the work site with all lead and lift
3.00 including shoring, shuttering & dewatering (if required) with cost of all
Labour, Hire & Running charges of the water pumps, Sundries, T & P
required for the work complete in all respect excluding GST as
directed by the Engineer- in- charge.
0.00
53.00 Foundation 894.31 Qntl 8860.10 79,23,676.03
54.00 Ground floor 2,176.95 Qntl 8860.10 1,92,87,994.70
Sl no Description Qty Unit Rate Amount
55.00 First floor 540.73 Qntl 8886.20 48,05,034.93
56.00 Service Building 0.00
57.00 Foundation 215.04 Qntl 8860.10 19,05,275.90
58.00 Ground floor 203.29 Qntl 8860.10 18,01,169.73
Providing Fly Ash. brick masonry of size 25cm. x 12 cm. x 8 cm.
having crushing strength not less than 75 kg. Per Sqr. Cm. in cement
mortar of mix (1:6) with approved grade cement and screened &
washed sand for mortar after immersing the bricks for 6 (Six) hours in
water before use in foundation & plinth including splays cutting,
circular moulding, corbelling, chamfering and similar such type of
59.00 works, watering and curing etc. including cost, coveyance,stacking,
loading, unloading, royalties of all materials ,cost of all
labour,scaffolding, sundries and T&P required for the works complete
in all respect as per specification excluding GST as directed by the
Engineer-in-charge.
0.00
60.00 Brick work in foundation 327.93 cum 4999.00 16,39,322.07
61.00 Brick work in foundation Service Building 87.41 cum 4999.00 4,36,962.59
Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having 0.00
crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar
of mix (1:6) with approved grade cement and screened & washed
sand for mortar after immersing the bricks for 6 (Six) hours in water
before use in Superstructure including splays cutting, circular
moulding, corbelling, chamfering and similar such type of works,
62.00 watering and curing etc. including cost, coveyance,stacking, loading,
unloading, royalties of all materials ,cost of all labour,scaffolding,
sundries and T&P required for the works complete in all respect as
per specification excluding GST as directed by the Engineer-in-
charge.
0.00
63.00 ground floor 316.52 cum 5038.20 15,94,691.06
64.00 Service Building 100.40 cum 5038.20 5,05,835.28
65.00 First floor 196.75 cum 5331.20 10,48,913.60
66.00 Parapet wall 54.35 cum 5668.20 3,08,066.67
12 m.m thick cement plaster in cement mortar of mix (1:6) in all floors 0.00
at all height using screened & washed sharp river sand for mortar
with approved quality of cement, finished smooth to the even surface
of the brick masonry walls after racking out the joints properly
,providing grooves wherever necessary including cost, conveyance,
67.00 loading, unloading,stacking, royalties of all Materials, cost of all
Labour, T&P, Sundries , Scaffolding, Watering, Curing,Rounding of
corners etc. required for the work complete in all respectas per
specification excluding GST as directed by the Engineer- in- charge.
0.00
68.00 ground floor 1,087.73 sqm 150.60 1,63,812.14
69.00 Service Building 164.36 sqm 150.60 24,752.62
70.00 Outer Plaster for first floor 297.59 Sqm 156.60 46,602.59
16 m.m thick cement plaster in cement mortar of mix (1:6) in all floors 0.00
at all height using screened & washed sharp river sand for mortar
with approved quality of cement, finished smooth to the rough surface
of the brick masonry walls after racking out the joints properly
,providing grooves wherever necessary including cost, conveyance,
71.00 loading, unloading,stacking, royalties of all Materials, cost of all
Labour, T&P, Sundries , Scaffolding, Watering, Curing,Rounding of
corners etc. required for the work complete in all respect as per
specification excluding GST as directed by the Engineer- in -charge.
0.00
72.00 Ground floor 2,091.89 sqm 215.90 4,51,639.05
73.00 Service Building 528.62 sqm 215.90 1,14,129.06
74.00 First floor 2,010.48 sqm 221.30 4,44,919.22
Sl no Description Qty Unit Rate Amount
6 m.m thick cement plaster in cement mortar of mix (1:4) in all floors 0.00
at all height using screened & washed sharp river sand for mortar
with approved quality of cement to the ceiling of the Roof Slab,
Staircase, Beams, Columns,Landings, Railings,Chajja ,Fins ,Walls
,Jally and Shelves etc. including roughening, scraping, chiseling,
cleaning, closed deep chipping with slurry treatment and finished
75.00 smooth to all R.C.C. Surface including cost, conveyance, loading,
unloading, royalties ,stacking of all Materials, cost of all
Labour,Sundries, T&P, Scaffolding,Watering, Curing etc. complete in
all respectas per specification excluding GST as directed by the
Engineer- in- charge
0.00
76.00 ground floor Floor 1,600.55 sqm 167.80 2,68,572.29
77.00 Service Building 57.01 sqm 167.80 9,566.28
78.00 First Floor 1,131.10 Sqm 172.10 1,94,662.31
Finishing wall surface of walls with cement based wall putty ( water 0.00
based) of approved make and finishing the surface smooth by sand
papering to receive paint in all floor & at all heights including cost,
coveyance, loading , unloading ,stacking of all Materials, cost of all
79.00 Labour,Sundries, Staging,Scaffolding, T&P required for the work etc.
complete in all respect excluding GST as per specification as directed
by Engineer-in-charge.
0.00
80.00 ground Floor 51,434.69 sqft 78.40 40,32,479.70
81.00 Service Building 9,237.05 sqft 78.40 7,24,184.72
82.00 First floor 37,005.47 sqft 78.40 29,01,228.85
Preparing surface and painting at all height with two or more coats of 0.00
interior Plastic Emulsion paint of approved brand, shade and
manufacture over one coat of water bound cement primer of
approved brand to give an even shade on walls and ceiling,including
83.00 cost, coveyance, loading , unloading ,stacking of all Materials, cost
of all Labour,Sundries, Staging,Scaffolding, T&P required for the work
etc. complete in all respect excluding GST as per specification as
directed by Engineer-in-charge.
0.00
84.00 Ground floor 39,730.71 sqm 162.20 64,44,321.16
85.00 Service Building 694.10 sqm 162.20 1,12,583.02
86.00 First floor 33,803.37 sqm 165.50 55,94,457.74
Providing two coats of Exterior grade weather seal paint from
BERGER/ASIAN PAINT/ICI/NEROLAC over a coat of Priming (with
water based Exterior Primer)of approved quality and colour, using the
required quantity of paint as specified by the manufecturer to give all
external surface over the finished plaster surface including watering
87.00 the surface before applying and curing for the required period as
directed by the Engineer-in-charge including cost of all materials with
taxes and transportation, all labour, scaffolding, sundries, T&P etc.
complete.
0.00 0.00
88.00 Ground floor 1,087.73 sqm 154.00 1,67,510.42
89.00 Service Building 164.36 sqm 154.00 25,311.44
90.00 First floor 297.59 sqm 159.60 47,495.36
91.00 Service Building Parapate wall 108.47 sqm 159.60 17,311.81
92.00 Parapet wall 429.93 sqm 165.40 71,110.42
Providing ,Fitting and Fixing minimum 8 m.m to 10m.m thick Vitrified 0.00
Tile of approved make conforming to IS : 13755 in flooring using
Vitrified Tile of approved quality, colour and size(600 m.m x1200 m.m
coloured printed series homogeneous) in floors, treads on steps and
landings in all floors at all height on 20m.m thick bed of cement
mortar of mix (1:4) laid in proper slope and gradient with screened &
washed sharp river sand for mortar and grouted with neat white
cement slurry joining the Vitrified Tile with neat white cement slurry
mixed with required quantities of pigments of approved marks to
match the shades of the Vitrified Tile if required (Tiles are to be
93.00
immersed in the water for required time before use) including cost,
conveyance, loading, unloading, stacking, royalties of all Materials,
cost of all Labour, Sundries, T&P required for the work
,Watering,Curing for required days including cleaning the flooring
space manually etc. complete in all respect excluding GST as
directed by the Engineer-in-charge. Note - Sample of tiles shall be
approved before procurement and use.)
0.00
Sl no Description Qty Unit Rate Amount
94.00 ground floor 555.40 sqm 1038.70 5,76,893.98
95.00 Service Building 0.00
96.00 First Floor 122.61 Sqm 1050.00 1,28,740.50
Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 0.00
sqm. (20mm thick) of approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4 course sand) laid in proper
slope and gradient with screened and washed sharp sand for mortar
and grouted with neat white cement slurry jointing the tile with neat
white cement slurry mixed with required quantities of pigments of
approved marks to match the shades of the granite tile if required
97.00 watering and curing for 21 days, including cost, conveyance, loading,
unloading, royalties of all materials, cost of all labour, sundries, T&P
required for the work including rubbing mechanically and wax
polishing etc. complete in all respect as per specification as per
specification as directed by Engineer-in-charge.(Note- Sample of tiles
shall be approved before procurement and use.)
0.00
98.00 ground Floor 98.28 sqm 2978.80 2,92,756.46
99.00 First Floor 54.43 sqm 3002.10 1,63,404.30
Providing Granite stone prepolished 10mm thick in dado of approved 0.00
quality, colour and size in dado/skirting , riser of steps in all floors at
all height on 12mm thick bed of cement mortar of mix (1:3) laid in
proper slope and gradient with screened and washed sharp sand for
mortar and grouted with neat white cement slurry jointing the tile with
neat white cement slurry mixed with required quantities of pigments of
approved marks to match the shades of the granite tile if required
100.00 watering and curing for 21 days, including cost, conveyance, loading,
unloading, royalties of all materials, cost of all labour, sundries, T&P
required for the work including rubbing mechanically and wax
polishing etc. complete in all respect as per specification as per
specification as directed by Engineer-in-charge.(Note- Sample of tiles
shall be approved before procurement and use.)
0.00
101.00 GroundFloor 29.17 sqm 2142.60 62,499.64
102.00 First Floor 16.59 sqm 2176.00 36,099.84
Providing , Fitting & Fixing 16 mm thick Kota stone tile 0.00
(above.10sqm) in flooring using special grade of Kota stone tile
confirming to I.S 13755 of approved quality and shade in floors,
treads on steps and landings in all floors at all height on 20 m.m thick
bed of cement mortar of mix (1:4) laid in proper slope and gradient
with screened & washed sharp river sand for mortar and grouted
with neat white cement slurry, joining the kota stone tile with neat
103.00 white cement slurry, including cost, conveyance, loading, unloading,
stacking, royalties of all Materials, cost of all Labour, Sundries, T&P
required for the work , Watering , Curing for required days , cleaning
the flooring space manually etc. complete in all respect excluding
GST as directed by the Engineer-in-Charge.
0.00
104.00 Ground floor main building 330.76 sqm 1136.10 3,75,776.44
105.00 Service Building 186.15 sqm 1136.10 2,11,485.02
Supplying, Fitting & Fixing 16 m.m thick Kota Stone of approved
quality,shade and size in dados skirting and riser of steps in all floors
at all height on 12 mm. thick cement plaster in cement mortar (1:3)
using screened and washed sharp river sand for mortar with cement ,
grouted with neat cement slurry and jointed with neat cement slurry
mixed with required shade of pigments to match the shade of Kota
106.00 Stone including cost, conveyance, loading, unloading,
stacking,royalties of all materials, cost of all labour, T & P, sundries,
watering & curing etc. required for the work complete in all respect
excluding GST as directed by the Engineer-in-Charge.
Galvanized iron wire of 8 SWG dia is wound and twisted at the end.
168.00
The galvanized iron wire of 8 SWG dia shall be cut to length as per
169.00
site
170.00 requirement.
The pre coated wall angles with equal flanges of size 24mm are fixed
171.00
along
the perimeter of walls with the help of star screws of minimum 25mm
172.00
length
173.00 of suitable dia at 300mm centres
Then suspend the Main T24 (Black) profiles having flange width
174.00
24mm,
height of minimum 38mm is fixed at 1200 c/c. The Cross T24 profiles
175.00
of
length 1200mm having flange width 24mm, height of minimum
176.00
38mmis
Sl no Description Qty Unit Rate Amount
then interlocked into the pre-cut slots in the Main T24 profiles at
177.00
600mm
178.00 centres in the direction perpendicular to the Main T24 profiles.
Then another T24 profiles of length 600mm having flange width
179.00
24mm,
height of minimum 38mm are then interlocked into the pre cut slots of
180.00
The grade of glavanized iron sheet is as per BIS and the grade of
186.00
aluminium
187.00 capping is as per (Al-Mn) 3003 of H-46 to 48.
188.00 Boarding
A layer of 15mm thick Bio soluble soft fiber tile of size 595x 595mm
189.00
is placed
on the suspended T24 frame work. The board shall meet the following
190.00
191.00 requirements.
Buliding material class as per EN 13501-1, A2-S1 d0 / Class 1or A,
192.00
202.00 2. Refer drawings for suspension heights 106 Sqm 2,500.00 2,65,000.00
203.00 Absorption Ceiling
Supply and installation of 595mmX595mmX15mm thick Soft fiber tile
204.00
Galvanized iron wire of 8 SWG dia is wound and twisted at the end.
212.00
The galvanized iron wire of 8 SWG dia shall be cut to length as per
213.00
site
214.00 requirement.
The pre coated wall angles with equal flanges of size 24mm are fixed
215.00
along
the perimeter of walls with the help of star screws of minimum 25mm
216.00
length
217.00 of suitable dia at 300mm centres
Then suspend the Main T24 (Black) profiles having flange width
218.00
24mm,
height of minimum 38mm is fixed at 1200 c/c. The Cross T24 profiles
219.00
of
length 1200mm having flange width 24mm, height of minimum
220.00
38mmis
then interlocked into the pre-cut slots in the Main T24 profiles at
221.00
600mm
222.00 centres in the direction perpendicular to the Main T24 profiles.
Sl no Description Qty Unit Rate Amount
Then another T24 profiles of length 600mm having flange width
223.00
24mm,
height of minimum 38mm are then interlocked into the pre cut slots of
224.00
The grade of glavanized iron sheet is as per BIS and the grade of
230.00
aluminium
231.00 capping is as per (Al-Mn) 3003 of H-46 to 48.
232.00 Boarding
A layer of 15mm thick Bio soluble soft fiber tile of size 595x 595mm
233.00
is placed
on the suspended T24 frame work. The board shall meet the following
234.00
235.00 requirements.
Buliding material class as per EN 13501-1, A2-S1 d0 / Class 1or A,
236.00
246.00 2. Refer drawings for suspension heights 600 sqmt 2500 15,00,000.00
247.00 Reflective ceiling
248.00 Supply and installation of 12.5mm thick plain gypsum
249.00 Construction of Frame work
Frame work shall consists of GI perimeter channels of size 0.55mm
250.00
thick
(having one flange of 20mm and another flange of 30mm) fixed along
251.00
with
perimeter of the beam with the help of nylon sleeves and screws at
252.00
600mm
c/c. Then suspend GI main channels of size 45 mm (0.9mm thick with
253.00
2
flanges of 15mm each) from the soffit at 1200mm c/c by using soffit
254.00
angle of
size 25mm x 10mm x 0.55mm thick fixed to true ceiling by using
255.00
suitable
fasteners. Cross channels of size 0.55mm thickness having knurled
256.00
web of
51.5mm and two flanges of 26mm each with lips of 10.5mm are then
257.00
fixed to
the main channel with the help of connecting clips and in a direction
258.00
274.00 2. Refer drawings for suspension heights & profiles 350 Sqm 1,800.00 6,30,000.00
275.00 Absorptive wall panelling
Supply and installation of 25mm thick fabric wrapped woodwool
276.00
board
277.00 backed with 50mm thick 1000GSM polyester wool
278.00 Construction of Frame work
Frame work consists of 50mm high GI wall channels with fully knurled
279.00
282.00 Boarding
A layer of 25mm thick, square edge, magnesite bonded pinewood
283.00
fiber
panels of size 600x1200x25mm having density 400kg/m3, fixed to
284.00
channels
by using suitable by using rust protected metal fasteners of size
285.00
4.5mm Ø
x25mm length . Each panel should receive minimum 6nos fasteners.
286.00
fabric
wrapped wood wool board to be butt jointed and ensure boards are in
287.00
297.00 2. Refer drawings for over all depth of the system 550 sqmt 6,000.00 33,00,000.00
298.00 Main hall reflective wall panelling
Supply and installation of FR grade 12mm thick laminated plywood
299.00
backed
300.00 with 50mm thick 1000GSM polyester wool
301.00 Construction of Frame work
Frame work consists of 25mm high GI wall channels with fully knurled
302.00
379.00 Boarding
A layer of 25mm thick, square edge, magnesite bonded pinewood
380.00
fiber
panels of size 600x1200x25mm having density 400kg/m3, fixed to
381.00
channels
by using suitable by using rust protected metal fasteners of size
382.00
4.5mm Ø
x25mm length . Each panel should receive minimum 6nos fasteners.
383.00
fabric
wrapped wood wool board to be butt jointed and ensure boards are in
384.00
393.00
Note -1.Vendors to submit all test certificates (Acoustics and fire)
394.00 2. Refer drawings for over all depth of the system 250 sqmt 4,500.00 11,25,000.00
395.00 BT Road
Clearing and grubbing road land including uprooting rank
vegetation, grass, bushes, shrubs, saplings and trees girth up to 300
mm, removal of stumps of trees cut earlier and disposal of
unserviceable materials and stacking of serviceable material to be
396.00 used or auctioned, up to a lead of 1000 metres including removal and 0.43 Hector 64473.80 27723.73
disposal of top organic soil not exceeding 150 mm in thickness, with
cost of all labours, materials , T&P etc. as required for the work
complete as per the direction of Engineer-In-Charge.
2 nos single core 1.5 sq. mm copper wire for phase and neutral
and 01 no of single core 1.5 sq. mm copper wire for earth continuty
484.00 899 Mtr 179.00
conductor. In 20 mm dia non metallic heavy duty flexible conduit
(LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) 1,60,921.00
2 nos single core 2.5 sq. mm copper wire for phase and neutral
and 01 no of single core 1.5 sq. mm copper wire for earth continuty
485.00 conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB 6788 Mtr 210.00
to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR)
(2X2.5+1X1.5) 14,25,480.00
4 nos single core 2.5 sq. mm copper wire for phase and neutral
and 02 nos of single core 1.5 sq. mm copper wire for earth continuty
486.00 6577 Mtr 298.00
conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB
to LSB/5A SOCKET) (4X2.5+2X1.5) 19,59,946.00
2 nos single core 4 sq. mm copper wire for phase and neutral and
01 no of single core 1.5 sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy duty flexible conduit
487.00 3422 Mtr 302.00
.(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL
TO CORRIDOOR POINT/DG PANEL ESSENTIAL LOAD)
(2X4+1X1.5) 10,33,444.00
4 nos single core 4 sq. mm copper wire for phase and neutral and
02 nos of single core 2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy duty flexible conduit.(PDB
488.00 1455 Mtr 390.00
to PSB/GAYSER. POINT/AC POINT/DG PANEL ACCL TO EACH
QTR ESSENTIAL LOAD) (4X4+2X2.5)
5,67,450.00
2 nos single core 6 sq. mm copper wire for phase and neutral and
01 no of single core 4.0 sq. mm copper wire for earth continuty
489.00 500 Mtr 324.00
conductor in 25 mm dia non metallic heavy duty flexible conduit
.(LFDB TO LBDB) (2X6+1X4.0) 1,62,000.00
4 nos single core 6 sq. mm copper wire for phase and neutral and
02 nos of single core 4.0 sq. mm copper wire for earth continuty
490.00 conductor in 32 mm dia non metallic heavy duty flexible 2455 Mtr 584.00
conduit.(LFDB TO LBDB/power unit/point) (4X6+2X4.0)
14,33,720.00
4 nos single core 10 sq. mm copper wire for phase and neutral and
02 nos of single core 6 sq. mm copper wire for earth continuty
491.00 conductorin 32 mm dia non metallic heavy duty flexible conduit 2544 Mtr 625.00
.(LFDB TO FLOOR PANEL TO TPN BDB light ) (4X10+2X6)
15,90,000.00
4 nos single core 16 sq. mm copper wire for phase and neutral and
02 nos of single core 10 sq. mm copper wire for earth continuty
492.00 conductorin 32 mm dia non metallic heavy duty flexible conduit 2133 Mtr 637.00
.(LFDB TO FLOOR PANEL TO TPN BDB light ) (4X16+2X10)
13,58,721.00
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket
outlet, with 2 pole and earth metal enclosed plug top along with 32
amps. C-series, SP MCB, in sheet steel enclosure, on surface or in
493.00 recess, with chained metal cover for the socket outlet, and complete 12 Nos 580.00
with connections, testing and commissioning etc. as required as per
direction of Engg.-in-Charge.
6,960.00
Supplying and fixing following size/ modules, GI box along with
modular base & metallic cover plate (both side)(anti bactorial type)
494.00
plate for modular switches in recess etc as required as per direction
of Engg.-in-Charge.
495.00 4 moudle(125mmx75mm) 20 33 271.00 5,420.00
496.00 1 moudle(75mmx75mm) 20 Nos 224.00 4,480.00
497.00 12 moudle(200mmx150mm) 10 Nos 486.00 4,860.00
Sl no Description Qty Unit Rate Amount
Supplying and fixing of following sizes of medium class PVC FRLS
conduit ISI marked along with accessories in surface/recess
498.00 including cutting the wall and making good the same in case of
recessed conduit as required as per direction of Engg.-in-Charge .
-
499.00 20 MM 200 mtrs 85.00 17,000.00
500.00 25 MM 166 mtrs 100.00 16,600.00
Supply and fixing modular type indicator on the existing switch
501.00
box/cover . as required as per direction of Engg.-in-Charge. 18 Nos 108.00 1,944.00
Supplying and installation of AC starter Modular type, coil voltage-415
502.00 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size
including modular coveras required as per direction of Engg.-in- 16 Nos 621.00 9,936.00
Charge .
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing
503.00 switch box/cover as required as per direction of Engg.-in-Charge.
4 Nos 100.00 400.00
S/F of Bakelite angle holder/batten holder of ISI marked
504.00 conforming to IS-1258/1987 in place of ceiling rose as per direction
of Engg.-in-Charge . 16 each 63.00 1,008.00
Supplying,fixing of Blanking plate(modular type)( (anti bactorial &
flame retradant type)) in existing switch box(anti bactorial & falme
505.00 retradant type) including supplying of all required accessories of ISI
marked as approved as per direction of engg-in-charge.
18 Nos 43.00 774.00
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated
506.00 cover of reputed make,ISI marked with all other concerned materials
as per direction of Engg.-in-Charge. 1233 mtrs 108.00 1,33,164.00
507.00 Sub-Head II (Light fitting Fixture & Fan) -
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep
508.00 of exhaust fan in the existing wall, including fixing & conntection as
required as per direction of Engg.-in-Charge. 10 Nos 2,480.00 24,800.00
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep
1400 rpm with louvers of exhaust fan in the existing wall, including
509.00
fixing & conntection .as required as per direction of Engg.-in-Charge.
10 Nos 4,400.00 44,000.00
Supplying, installation, testing and commssioning of 1400 mm sweep
white/milky colour ceiling fan including wiring the down rod of
standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper
510.00
conductor, single core cable etc. as required.(With fan Regulator) as
required as per direction of Engg.-in-Charge.
30 Nos 2,486.00 74580.00
Supplying, installation, testing and commssioning of 1200 mm sweep
white/milky colour ceiling fan including wiring the down rod of
standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper
511.00
conductor, single core cable etc. as required as per direction of Engg.-
in-Charge, .(With fan Regulator)
30 Nos 2,227.00 66810.00
SITC of energy efficient LED tube light fittings with decorative batten
and LED tube light having power rating not more than 20 watt and
516.00
lumen output not less than 1800 lumen complete with electronic driver
and all other accessories with diffuser i/c connection etc as required.
22 Nos 803.00 17,666.00
639.00
Sl no Description Qty Unit Rate Amount
ENGINE: Water Cooled Diesel Engine with rated capacity of 750 BHP
at 1500 RPM; Turbo charged, direct injection type, 4 Stroke, 6
Cylinder including Fuel Tank of min. 400 liters capacity fabricated with
3 mm thick MS Sheet duly calibrated and painted with One coat of
640.00
Primer & two coats of synthetic enameled paint of approved colour,
residential type silencer with exhaust pipe 150 mm dia MS Pipe duly
wrapped with asbestos rope of legging of specified qualtiy &
specification.
641.00
AMF PANEL: Cubical, Compartmentalized, AMF Panel Baord with all
Power & Control Contractors, Switches, Meters and other
642.00 accessories, Internal Wiring, connection, inter-connection etc. for
Trouble Free smooth function for 250 KVA DG Set complete with
Battery Charger & leads as required.
643.00
BASE PLATE: Common Base Plate of required size for mounting of
Engine Alternator Set fabricated from MS Channerl and vibration
644.00
damping arrangement with cushy foor mounting including paintng etc.
as required.
645.00
FOUNDATION: Suitable size Cement Concrete (1:2:4) foundation
646.00 duly plastered and finished with neat coat Cement as required.
2 Set 22,33,400.00 44,66,800.00
647.00 (LIGHTENING PROTECTION)
648.00 (LIGHTENING CONDUCTOR)
AIR TERMINAL & ACCESSORRIES LIGHTNING ARRESTER+
MAST:
Providing and fixing of lightning conductor finial made of 25 mm
649.00 dia 300 mm long, copper tube,having single prong at top, with 85 24 NOS 1160.00 27,840.00
mm dia 3 mm thick G.I base plate including holes etc complete
as required with as per direction of Engg.-in-Charge.
Maintenance free Safe Earthing Electrodes with ISI G.I. pipe dia
75mm as Secondary electrode with wall thickness of 2.6 mm and the
Primary Earthing Electrode will be 50mm X 6mm X 1no M.S. hot
dipped galvanized strip filled with a highly conductive & non-corrosive
compound in between the Primary Earthing and the secondary
Earthing, the Surface Area in will be 7,06,500sqmm for 3mtrs length
and Cross Sectional Primary conducting area is 300 sq.mm. An Solid
655.00 G.I. Base plat seals the unit at the bottom. as per direction of Engg.- 4 SET 11000.00 44,000.00
in-Charge. (MES-GFC ground Filling compound will be provided in 25
kgs Bags.)(MES-GFC ground Filling compound will be provided in 25
kgs Bags.)(2 bags required for each earthing electrode.)(FOR
lightening protection & Building Electrification).
669.00 150 mm (W) X 50 mm (H) with 1.2 mm thick sheet 43 mtr 380.00 16340.00
670.00 450 mm (W) X 50 mm (h) with 1.6 mm thick sheet 34 mtr 605.00 20570.00
Supply & Making end Termination with brass compression gland and
671.00 aluminum lugs for PVC insulated and PVC sheathed cable of 1.1 Kv
grade (Without cost of cable)
672.00 3C X 70 Sqmm 6 each 780.00 4680.00
673.00 3C X 16 sqmm 4 each 390.00 1560.00
674.00 3C X 50 Sqmm 3 each 510.00 1530.00
675.00 3C X 6 Sqmm 2 each 310.00 620.00
676.00 PIPE & VALVES ETC.
Supply,installation,testing& Commissioing of 'c' class heavy duty MS
pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150mm
6 mm thick) with flanges and fitting such as bends, tees, reducers,
rubber insertions and galvanized nuts and bolts of following size on
surface along wall/shaft with MS bracket, suspended froom
677.00 ceiling/beam with Suspenders duly painted with two coats of primer
and finished with enamel paint of approved colour laid through pipe or
in trench after wrapping with hassen cloth after applying coat tar
primer as required as per direction of Engineer-in-
charge(TATA/ZINDAL).
Providing, fiting and fixing of C.I. 25 MM single air relief valve with
stop cock confirming to IS: 14845/2000 with ISI mark for water works
pupose including fixing the same with hydrant riser including testing &
706.00 commissioning the system etc. all complete as per approved 6 Nos 3700.00 22200.00
specification & direction of Engineer-in-chargee-make-
Kartar/Winco/Newage/Gilpro/Safex
Sl no Description Qty Unit Rate Amount
Providing,fitting and fixing of 4-way SS fire bridge connection
consisting of 63 mm dia instantaneous type male couplings with built-
in check valves,150 mm dia fianged outlet complete with bolts, nuts
707.00 and rubberr insertions confirming to IS:904 with ISI mark including 1 Nos 19602.00 19602.00
testing & commissioning the system etc. all complete as per approved
specification & direction of EIC. make-
Kartar/Winco/Newage/Gilpro/Safex
708.00 SPRINKLER SYSTEM
Supply,installation,testing & commissioning of pendent/ Upright type
Standrd Sprinkler with QB of 68/79 deg. C temperature rating and 1/2"
709.00 end connection confirming to IS: 15105 with ISI mark for all floors etc. 211 Nos 410.00 86510.00
all complete as per direction of Engineer-in-charge. make-
HD/Tyco/Viking
710.00 Upright 122 Nos 410.00 50020.00
711.00 Side wall 21 Nos 510.00 10710.00
SITC of standard response glass bulb type UL approved 79 degree
712.00 rated brass concealed pendent sprinklers having 15 mm NPT 10 415.00 4150.00
connection with all accessories
The Rosette shall be fabricated by M.S. plate of 2mm thick and the
713.00 finish shall be powder coated and colour shall be as approved by 311 85.00 26435.00
architects / clients.
Providing,fiting & fixing of folloeing size cast iron double flanged Y
type strainer with SS 304 perforated screen confirming to IS 1538
with ISI mark of ppressure rating PN-1.60 including fixing the same
with supply of required jointing materials like rubber insertion, MS
714.00
nuts & bolts, paint etc. and testing the joints with required water
pressure & all complete as per specification & direction of
E.I.C.Kartar/Zoloto/H-sarker/Emerald
Providing, fitting & fixing of C.I. single Air relief valve with stop cock
confirming to IS: 14845/2000 with ISI mark for water works purpose
718.00 including fixing the same with hydent riser including testing & 3 Nos 3700.00 11100.00
commissioning the system etc. all complete as per approved
specification & direction of EC.
Providing & fixing of water flow switch switable for pipe 100 mm
719.00 Diameter with all accessories for all floors etc. all complete as per 3 Nos 7500.00 22500.00
direction of Engineer-in-charge.
providing & fixing of 25 mm size Gunmetal pressure Release Valve
720.00 with isolation valve and all accessories conforming to IS:3233.1965 2 Nos 2940.00 5880.00
as per direction of Engineer-in-charge
Providing, landing, testing & commissioning of Flexible Sprinkler
Hose Corrugated Unbraided type of length 1mtr for fire Sprinklers,
with 1" Inlet Nipple BSPT, 1/2" Outlet Reducer BSPT, 0.7m square
721.00
supports Bar & Brackets(UL Listed) with all complete accessories as 211 Nos 1450.00 305950.00
per direction of Engineer-in-charge.
Fire buckets round bottom type enamel painted, white inside & Red
724.00 out side and Letter "FIRE" in black out side and handle with mounting 4 450.00 1800.00
bracket.
Fire bucket stand fabricated by MS angles to install 2 Nos. of buckets.
725.00 2 3560.00 7120.00
726.00 AUTOMATIC FIRE ALARMING AND PA SYSTEM
Supply, installation,testing & commissioning off Analog Addressable
727.00 smoke cum heat detector with status indicator ( 44 Nos 4150.00 182600.00
make:morley/Notifier/Siemens/Panasoinc)
Sl no Description Qty Unit Rate Amount
Supply, installation,testing & commissioning of Addresable manual
call point soft addressable type with ini built fault isolator as per NFPA
728.00 12 Nos 6800.00 81600.00
style7 wiring comlete as required (
make:morley/Edward/Notifier/Siemens/Panasoinc)
Supply, installation, testing & commisssioning of response indicator
729.00 complete as required. (Make: Morley/ Edward/ Notifier/ Siemens/ 44 Nos 120.00 5280.00
Panasonic)
Supply, installation, testing & commissioning of addressable loop
powered hooter (sound output of minimax 90db) cum strobe ( strength
730.00 8 Nos 8500.00 68000.00
of light 10cd) complete with inbuilt isolator as required.
(Make:morley/Edward/Notifier/Siemens/Panasonic)
Supply & fixing of 2 core 1.5 sq mm, multi strand, copper conductor,
FRLS (Fire Retardent Low Smoke)-PVC insulated GI Screened
731.00 788 mtr 137.00 107956.00
Armoured cable with saddle and required accessories & power cable
Providing and fixing in position the signage of " Fire Extinguisher " to
768.00 be pasted immediately above the every extinguisher. Size 15cm x 8 No 750.00 6000.00
20cm
769.00 Exhaust System in case of Fire
Supply, Installing, Testing and Commissioning of NORMAL & SMOKE
EXHAUST VANE AXIAL FANS as per specifications. Fan shall be
direct driven Vane axial fan AMCA Certified (For Air and Sound
Performance as well as FEG). The fan shall be equipped with
mounting bracket & spring isolators for the installation of the fans.
Compleate Fan & Motor (Class H Smoke Spill) assembly shall be of
high temperature resistance & EN 12101-3:2015 Certified for
minimum 250° C for 2 hrs. Motor make shall be same as mentioned
on the EN certificate. Motors shall be VFD Compatible suitable for
415+10% volts, 50 cycles, 3 phase AC supply. Fan static pressure
770.00 -
shall be as indicated but actual fan static pressure to be checked by
HVAC / MEP Vendor. Smoke Exhaust Fans shall be activated from
fire signal from fire alarm system. Fan shall be with fire proof flexible
connection at inlet and outlet. Motors shall be of minimum IE2
efficiency. Fan total efficiency should not be less than 75% and FEG
should not be less than 80, noise level should not be more than 70
dB(A) in Normal mode and 85 dB(A) in Emergency Mode @ 3m
distance when measured in hemispherical reverberant room
conditions. Sound attenutors of appropriate length shall be included in
the cost to achieve the desired result.
Description CFM
ESP(mmWG)
771.00 -
(Indicative)
Sl no Description Qty Unit Rate Amount
Normal / Fire Mode 42000
772.00 1 Nos 2,34,000 234000
15
773.00 JET FAN -
Supply, Installing, Testing and Commissioning JET FAN. Fan shall be
AMCA Certified (For Air and Sound Performance). Jet The fan shall
be equipped with mounting bracket & spring isolators for the
installation of the fans. Compleate Fan & Motor (Class H Smoke Spill)
assembly shall be of high temperature resistance & EN 12101-3:2015
Certified for minimum 250° C for 2 hrs. Motor make shall be same as
774.00 mentioned on the EN certificate. Motors shall be suitable for 415+10% -
volts, 50 cycles, 3 phase AC supply. Fans shall be supplied with 2D
silencer on both sides of the fan for Quite operation. Noise level
should not be more than 64/49 dB(A) @ 3 m when measured in
spherical free field conditions.
775.00 Jet Fan (5,900/2,950 CFM & 72/18 N Minimum) 2 Nos 71,500 143000.00
776.00 CO Sensor 4 Nos 22,000 88000.00
777.00 PLC Based Starter cum Control Panel 1 Nos 1,20,000 120000.00
778.00 CFD Analysis 1 Nos 2,00,000 200000.00
779.00 500 CFM Propeler Exhaust Fan for Toilet 4 Nos 6,000 24000.00
780.00 700 CFM Propeler Exhaust Fan for Toilet 1 Nos 8,000 8000.00
781.00 1800 CFM Cabinet Type Exhaust Fan - Nos 18,000 0.00
782.00 2800 CFM Cabinet Type Exhaust Fan - Nos 27,000 0.00
783.00 3200 CFM Cabinet Type Exhaust Fan 1 Nos 31,000 31000.00
784.00 4000 CFM Cabinet Type Exhaust Fan 1 Nos 34,000 34000.00
785.00 4600 CFM Cabinet Type Exhaust Fan 1 Nos 35,000 35000.00
786.00 Air Distribution Part -
SITC of 18 Gauge site fabricated GI sheet metal ducting with
787.00 66 Sqm 2,200 145200.00
complete accessories
SITC of 20 Gauge site fabricated GI sheet metal ducting with
788.00 211 Sqm 1,900 400900.00
complete accessories
SITC of 22 Gauge site fabricated GI sheet metal ducting with
789.00 455 Sqm 1,700 773500.00
complete accessories
SITC of 24 Gauge site fabricated GI sheet metal ducting with
790.00 122 Sqm 950 115900.00
complete accessories
Accoustic insulation (Thick Glass Wool Board, Tissue with Aluminium
791.00 perforated sheet) material for Duct insulation (25+25) mm 388 Sqm 349200.00
900
792.00 Supplier Air Grill / Diffuser with damper 6 Sqm 14,500 87000.00
793.00 Fire Reyerdent type flexible Canvas 6 Sqm 3,500 21000.00
794.00 LAN
Supply & Laying of Cat6 23Awg UTP Cable, through existing conduit.
795.00 2344 Mtr ₹ 57.00 133608.00
Supply & fixing of RJ-45Jack of Category 6 with Dual-port British-style
796.00 Face plate 86x86 mm with Curveture and wall mount box. 10 Nos ₹ 1,358.00 13580.00
797.00 Supply & fixing of Cat6 24 Port Loaded Patch Panel: 3 Nos ₹ 10,997.00 32991.00
Supply & Installation of Cat6 Factory crimpped moulded patch cord,
798.00 66 Nos ₹ 395.00 26070.00
1mtr.
Supply & Installation of Cat6 Factory crimpped moulded patch cord,
799.00 12 Nos ₹ 508.00 6096.00
2mtr.
Supply & Installation of 6F Single Mode Armoured FO Cable through
800.00 100 Nos ₹ 109.00 10900.00
existing conduit.
Supply & Installation of 24 Port Rack Mount Loaded LIU including SM
801.00 2 Nos ₹ 19,419.00 38838.00
SC Adaptor and Pigtail.
Supply & Installation of Single Mode SC-LC Type OFC Patch Cord,
802.00 2 Mtr ₹ 2,892.00 5784.00
2mtr length.
803.00 Supply & Installation of 1000Base LX Fiber Transceiver. 2 Nos ₹ 13,289.00 26578.00
Supply & Installation of 24 Port 10/100/1000Mbps L3 Fiber Managed
804.00 1 Nos ₹ 2,70,000.00 270000.00
PoE Switch with 4 SFP Ports.
Supply & Installation of 24 Port1 10/100/1000Mbps L2+ Managed
805.00 1 Nos ₹ 58,692.00 58692.00
PoE Switch with 4 SFP Ports.
Supply & Installation of 8 Port1 10/100/1000Mbps L2+ Managed PoE
806.00 1 Nos ₹ 27,500.00 27500.00
Switch with 4 SFP Ports.
Supply & Installation of 9U/500Wall Mount Rack with FAN, PDU,
807.00 1 Nos ₹ 8,177.00 8177.00
Cable manager and H/W Pkt.
808.00 Subhead- 1.a (IP-PBX System)
Supply & Installation of IP based PoE Phone with single lie Display
809.00 with 2 Ethernet Port. 6 Nos ₹ 6,188.00 37128.00
Supply & Installation of IP based PoE Video Phone with 7" colour
810.00 1 Nos ₹ 37,416.00 37416.00
display and 2 Ethernet Port.
Sl no Description Qty Unit Rate Amount
Supply and installation of Grand Stream UCM-6302, IP PBX System
support upto 100Users and minimum 60 concurrent calls, integrated
2 PSTN trunk FXO ports through External Gateway, 2 analog
telephone FXS ports with lifeline capability and up to 50 SIP trunk
811.00 accounts, Gigabit network ports with Integrates PoE, USB, SD card, 1 Nos ₹ 43,798.00 43798.00
Supports up to a 5-level IVR (Interactive Voice Response), Supports
any SIP video endpoint that uses the H.264, H.263 or H.263+ codecs
854.00 AHU control panel Box with VFD 1 NOS 120000 120000.00
855.00 C2 1 x 320 KVA Sub-Station (Transformer) :
Supplying & installation of 100x116 mm RS Joist, 9 mtr long x 2
856.00 11968.00
nosx23 Kg=414 Kg 88 Kg 136.00
Supplying & installation of Pressure Channel 100 x 50 x 6mm MS
857.00 8704.00
channel each 2.8 mtr. Long( 9.2 K.g. per mtr.)x2 Nos 64 K.g. 136.00
Supplying & installation of S/S DP bressing chhanel 75 x 40 x 6mm
858.00 8704.00
MS channel each 2.8 mtr. Long( 6.8 K.g. per mtr.)x2 Nos 64 K.g. 136.00
Supplying & installation of AB Swith & HG Fuse, Mounting Channel
859.00 8704.00
75x40x6 -2.8 mtr.long, 4 nos.(6.8K.g. per mtr.) 64 K.g. 136.00
Supplying & installation of Cantilever chhanel for supporting AB
860.00 8704.00
Switch arm, 75x40x6-1 mtr. Long, 2 nos.(6.8 K.g. per mtr.) 64 K.g. 136.00
Contilever chhanel for supporting HG Fuse 50 x 50 x 6 mm MS Angel
861.00 8704.00
(1.0 mtrs. Long 2 nos.)4.5K.g. per mtr. 64 K.g. 136.00
Supplying & installation of Angle for Cantilever arrrangement for AB
862.00 Switch & HG Fuse 50 x 50 x 6 -2 mtr .each 2 nos.(4.5 K.g. per mtr.) 8704.00
64 K.g. 136.00
Supplying & installation of S/S DP bressing Angle 50 x 50 x 6 mm -
863.00 2.8 mtr. Long 2 nos.(4.5 K.g. per mtr.) with side angel ( Total 9 mtr.) 8704.00
64 K.g. 136.00
Supplying & installation of Angle for mounting LT distribution Box 50
864.00 x 50 x 6 mm MS Angel -2.5 mtrs.each Long 2 nos.( 4.5 K.g. per mtr.) 8704.00
64 K.g. 136.00
865.00 Supplying & installation of 11KV AB Switch 3 Pole (400 Amp.) 2 Set 18478.00 36956.00
866.00 Supplying & installation of 11KV HG Fuse 3 Pole (700 Amp.) 2 No. 14487.00 28974.00
867.00 Supplying & installation of11 KV L.A. 12KV-10KA 6 No. 3696.00 22176.00
868.00 Supplying & installation of+B7 H.T.stay set ( Complete ) 8 Set 1461.00 11688.00
869.00 Supplying & installation of H.T. Stay Insulator 8 No. 111.00 888.00
870.00 Supplying & installation of H.T. Stay clamp (1.95 K.g./ Pair ) 8 Pair 130.00 1040.00
871.00 Supplying & installation of 7/10 SWG Stay Wire 162.4 K.g. 136.00 22086.40
2 No 566700.0 1133400.00
Supplying & installation of 100x116mm RS Joist 4mtr longx23kg for
888.00 11968.00
resting of LT cable 88 Kg 136.00
889.00 Construction of Plinth for TFR 6ft hight (below GL2ft)x5ftx5ft 2 NO 29270.00 58540.00
Barbed Fencing (size 15'x15' )with constn. of retaining wall ,erection
of RCC fencing post, Sand filling and metal spreading, Fixing of Iron
890.00 117930.00
gril gate etc as per CESU specification
2 No 58965.00
Providing and fixing 25mm x 5 mm G.I strip on surface or in recess for
891.00 4080.00
connections etc. as required. 30 Mtr 136.00
Sundries for survey , PVC tape, Ampire tape,Danger Board, small
892.00 13564.00
size nut & Bolt preparation of drawing cable socket etc 2 LS 6782.00
893.00 External Illumination 0.0
894.00 LIGHT SYSTEM 0.0
Supply ,Installation testing commissioning of elegant look Panasonic
single arm by 1x 120 W LED street light having die cast aluminium
housing with toughened glass having lumen output of 14500 or
more (As per LM 79 report of third party NABL lab) ,IP 66 protection
or more , LED street light model will be vide Panasonic / similar
model of of LT /Wipro/PHILIPS/Havells or its equivalent of
Philips/LT/WIPRO or equievalant reputed make & model A catogory,
ISI marked as approved, with proper model make having warrantied
for a period of 5 years . The luminaire to be installed in 9 mtr long GI
hot dip galvanized pole of Valmount/Transrail/RR/UTKASH /Utkal
895.00
Galvanizer make equievalant make with proper model complete with
SA bracket internal JB with 4 way connector and MCB as per the
pole drawing and direction of EIC against which inspection mat take
place. It should be installed after making proper size RCC foundation
by considering RCC foundation by using M20 grade RCC & Fe 415
grade reinforcement and fixing the 4 nos. En 8 grade J type fdn bolts
in the foundation. The luminaire needs to be wired with 3 c 1 sq mm
wire from JB as per the direction of Engg-in -charge.
909.00 4core x 10 sq mm (OFP TO IND. TIMER PANEL,Street light) 766 Mtr 133.89 102559.74
910.00 4 core x 4 sq mm (for small power/LIGHT TO POLE) 677 Mtr 87.87 59487.99
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv
grade size not exceeding 25 SQ. MM direct in ground in the trench in
911.00 one horizental formation including excavation ,sand coushing 93800.00
protection covering and refilling the trench etc as required as per
direction of Engg.-in -charge. 700 Mtr 134.00
Sl no Description Qty Unit Rate Amount
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated
cover of reputed make,ISI marked with all other concerned materials
as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty
912.00 certificate to be submitted to the department for genuinity of product & 61128.00
to avail free after sales service within warranty period for acceptance
of materials
566 mtrs 108.00
Providing,fixing and laying of fallowing dia HDPE pipe (medium class)
in ground complete with fitting incl. trenching(75 mm depth)and
refilling as per direction of Engg.-in-Charge. Ncessary test report &
913.00 Warrnaty certificate to be submitted to the department for genuinity of 0.00
product & to avail free after sales service within warranty period for
acceptance of materials
934.00 Microphones
Supply, Installation, Testing and Commissoning of Cardioid
Condenser Quick-mount Gooseneck Microphone. Polar Pattern
Cardioid, Frequency Response 70-16,000 Hz
935.00 Open Circuit Sensitivity -37 dB (14.1 mV) re 1V at 1 Pa 2 Nos 35600.00 71200.00
Maximum Input Sound Level 134 dB SPL, 1 kHz at 1% T.H.D. It is
inclusive of Microphone Base.
Supply and Laying of High flexible Speaker cable for power amplifiers
upto minimum 500 Watt , Jacket - PVC, ø 0.32 in, black Conductor -
943.00 Stranded bare copper wires, 140x35 AWG (13AWG) , 200 Mtrs 275.00 55000.00
Sl no Description Qty Unit Rate Amount
Supply and Laying of Audio Signal Cable;Balanced microphone cable
with single shield, high flexible, velvet faint PVC-Jacket , Conductor:
944.00 Stranded bare copper wires 28 x 0.10 mm (0.22mm²) , Jacket: PVC, 300 Mtrs 145.00 43500.00
6.0 mm max. Ø
956.00
Supply, Installation, Testing and Commissioning of SITC of Active
957.00 LED Screen of size 9.6 mtr x 5.4 mtr , 2.5mm pixel pitch 1 Set 32000000.00 32000000.00
981.00
982.00 Items Qty Unit Rate Amount
Motorized Main Curtain straight centre parting as per design made
up of I Track, Trollies uniformly distributed along the track at every
200/250mm with a master trolley, Drive unit with suitable capacity of
983.00
motor unit, GI Wire rope. All metal parts are powder coated with black 1 Nos 475900.00 475900.00
texture finish paint.
(Make:- Leksa/ Aultra Lighting/ Markrich)
Sl no Description Qty Unit Rate Amount
Motorized Rear Curtain straight centre parting as per design made
up of I Track , Trollies uniformly distributed along the track at every
200/250mm with a master trolley, Drive unit with suitable capacity of
984.00
motor unit, GI Wire rope. All metal parts are powder coated with black 1 Nos 445650.00 445650.00
texture finish paint.
(Make:- Leksa/ Aultra Lighting/ Markrich)
Fixed Wing Structure designed as per site condition made up of MS
Square tube of 25mm or higher size rested on pivotable trolley for the
985.00 8 Nos 52750.00 422000.00
rotation of the wing.
(Make:- Leksa/ Aultra Lighting/ Markrich)
On Stage Fixed Valance Bar Straight as per the design made out of
40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main
986.00 Valance of the stage system duly powder coated with matt black 1 Nos 49500.00 49500.00
texture finish paint
(Make:- Leksa/ Aultra Lighting/ Markrich)
On Stage Fixed Frill Bar Straight as per the design made out of 40NB
48 OD Mild steel pipe dual barrel, single construction connected with
987.00 MS Flat duly powder coated with matt black texture finish paint 2 Nos 42700.00 85400.00
(Make:- Leksa/ Aultra Lighting/ Markrich)
High quality Velvet fabric fire retardant treated as per approved colour
and make with a gathering of 100% stitched as per site condition,
988.00 curtain provided with eyelets at every 200/250mm for uniform fixing 1 Nos 554900.00 554900.00
on to curtain trollies (For Main Curtain)
(Make:- Om Phile/ Nexgen/ Comrade)
Glazzed Cotton fabric fire retardant treated as per approved colour
and make with a gathering of 50% stitched as per site condition,
curtain provided with eyelets at every 200/250mm for uniform fixing
989.00
on to curtain trollies 1 Nos 395200.00 395200.00
(For Rear Curtain).
(Make:- Om Phile/ Nexgen/ Comrade)
Glazzed Cotton fabric fire retardant treated as per approved colour
and make with a gathering of 0% stitched as per site condition, wing
provided with eyelets at every 200/250mm for uniform fixing on to
990.00
wing frame. 8 Nos 39500.00 316000.00
( For Wing )
(Make:- Om Phile/ Nexgen/ Comrade)
High quality Velvet fabric fire retardant treated as per approved colour
and make with a gathering of 100% stitched as per site condition,
991.00 curtain provided with eyelets at every 200/250mm for uniform fixing 1 Nos 200000.00 200000.00
on to curtain trollies (For Main Valance)
(Make:- Om Phile/ Nexgen/ Comrade)
High quality cotton fabric fire retardant treated as per approved colour
and make with a gathering of 50% stitched as per site condition,
992.00 curtain provided with eyelets at every 200/250mm for uniform fixing 2 Nos 75000.00 150000.00
on to curtain trollies (For frill)
(Make:- Om Phile/ Nexgen/ Comrade)
Cable Connecting Circuit Boxes for the termination of cables from
Electrical panel to the grid level point made out of MS Sheet metal
993.00 fabricated housing duly powder coated with matt black texture finish 2 Nos 2500.00 5000.00
paint, Fitted with required channels and ivory connectors, Necessary
glands etc.
Motor Control Panel cum remote control 2Way providing power input
for curtain motors internally neatly wired with contactors having
994.00 individual motor control with required Push button, Emergency trip, 1 Nos 75000.00 75000.00
RYB indicators, Supply Indictor and necessary meters with Cable
Connecting Circuit Boxes
C Profile MS Hot rolled strips 3mm thick with extra U bend used either
to create basic supports for various auditorium stage rigs, duly
995.00 powder coated with matt black texture finish paint 130 Mtrs 1200.00 156000.00
Auditorium Chairs :-
Providing and fixing and installation of Godrej make with requsite
bolts/ dash fastners etc. The upholstry color to be got approved from
the Architect.
Features
1. SEAT REST ASSEMBLY: The seat rest assembly | 1.520.1 cm Ihk
flat plywood measured as per QA method described In OCP-OLTA-
1000.00 P14-18 and in-altu moulded with polyurethane foam & upholstered
with polyester fabric and enclosed by an Injection moulded cover. The
Seat has an auto-tip up feature making it stay in upright position when
not in use enabling clear row passage. The seat profile has a large
wateriall edge to help the users get necessary comfort in popliteal
region.
*SEAT SIZE: 45.0 cm. (W/) x 50.5 cm (D) x 13.8 cm (T) Approx..
Internal PH works :
1010.00
Supplying all materials, labour, T&P and providing and fixing to wall or
ceiling and floor C-PVC pipes conforming to pipe fittings of the
1011.00 following nominal bore with clamps including making good the wall,
ceiling and floor all complete as per specification and direction of the
Engineer in charge 0.00
1012.00 Ground Floor 0.00
1013.00 20mm dia C-PVC pipe (Ashirbad/Supreme/Astrol) 60.00 Mtr 278.50 16,710.00
1014.00 25mm dia C-PVC pipe (Ashirbad/Supreme/Astrol) 80.00 Mtr 380.00 30,400.00
1015.00 32mm dia C-PVC pipe (Ashirbad/Supreme/Astrol) 70.00 Mtr 553.80 38,766.00
1016.00 40mm dia C-PVC pipe (Ashirbad/Supreme/Astrol) 20.00 Mtr 747.20 14,944.00
1017.00 First Floor
1018.00 20mm dia C-PVC pipe (Ashirbad/Supreme/Astrol) 30.00 Mtr 287.00 8,610.00
1019.00 25mm dia C-PVC pipe (Ashirbad/Supreme/Astrol) 40.00 Mtr 388.50 15,540.00
1020.00 32mm dia C-PVC pipe (Ashirbad/Supreme/Astrol) 35.00 Mtr 562.30 19,680.50
1021.00 40mm dia C-PVC pipe (Ashirbad/Supreme/Astrol) 40.00 Mtr 704.90 28,196.00
1022.00 50mm dia C-PVC pipe (Ashirbad/Supreme/Astrol) 120.00 Mtr 1157.00 1,38,840.00
Sl no Description Qty Unit Rate Amount
supplying all materials, labour, T&P and cutting holes through existing
brick work including making good the damages in cement mortar (1:4)
for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including
1023.00 watering, curing, cost & conveyance of all materials to worksite,
payment of royality, taxes etc. all complete as per direction of
Engineer-in-charge.
0.00
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend (
1053.00
Slimline-white-Parryware make ) 28.00 Each 1918.20 53,709.60
Supplying all materials, labour, T&P and fitting and fixing U-PVC
SWR soil waste ventilating pipes and fittings of the following outside
diameter conforming to ISI No 13592/1992 to walls with nails, bobbins
and wooden plugs or laying in trenches including jointing with supply
of approved rubber lubricant by non-heat application method/as per
1054.00 manufacturer's specification, testing, earthwork in excavation in all
kinds of soil and refilling of trenches , cost & conveyance of all
materials to worksite, payment of taxes etc. all complete as per P.H
specification and direction of the Engineer-in-charge.
0.00
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
1055.00
200.00 Mtr. 503.40 1,00,680.00
75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
1056.00
100.00 Mtr. 359.60 35,960.00
1057.00 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) 60.00 Each 388.00 23,280.00
1058.00 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) 20.00 Each 246.00 4,920.00
1059.00 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) 15.00 Each 202.50 3,037.50
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
1060.00
10.00 Each 472.70 4,727.00
1061.00 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) 10.00 Each 60.00 600.00
1062.00 110mm U-PVC HR Bend(Ori Plast/Finolex/Supreme Make) 10.00 Each 171.30 1,713.00
1063.00 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) 10.00 Each 338.50 3,385.00
1064.00 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) 10.00 Each 307.10 3,071.00
1065.00 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) 10.00 Each 335.70 3,357.00
1066.00 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) 10.00 Each 301.20 3,012.00
110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make)
1067.00
10.00 Each 246.00 2,460.00
1068.00 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) 25.00 Each 106.70 2,667.50
1069.00 W/C connector 22.00 Each 246.20 5,416.40
Supplying all materials,labour,T&P and fixing Flat back lipped wall
(stall urinal -630mmx180mm) urinal of the following sizes including
connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by
means of white lead mixed with chopped hemp, fixing 32mm. dia CP
1070.00 dome waste, 15mm. dia CP spreader including cutting holes in walls
and making good the damages with supply of wooden plugs, screws
and cement etc. all complete as per specification and direction of the
Engineer in charge
0.00
1071.00 Half stall urinal(Hindware)-No.60020 13.00 Each 5128.30 66,667.90
1072.00 Cost of 15mm dia urinal spreader 13.00 Each 286.60 3,725.80
1073.00 32mm dia CP dome waste 13.00 Each 128.50 1,670.50
Supplying all materials, labour, T&P and fixing vitreous china water
closet, squatting pan (Indian type W.C pan/Orissa pattern squatting
pan) duly embedded in cement concrete (1:5:10) using 4cm size hard
granite metal including fixing a pair of vitreous china 250mm x 130mm
x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without
1074.00 50mm dia horn) for water colset squatting pan including jointing the
trap with pan in cement mortar (1:1) cutting the floor and mending
good the damages , cost & conveyance of all materials to worksite,
payment of royality , taxes etc. all complete as per P.H specification
and direction of the Engineer-in-charge.
0.00
1075.00 580mm size Orissa pan (Hindware/Parryware/Neycer make) 6.00 Each 3507.90 21,047.40
Sl no Description Qty Unit Rate Amount
Supplying all materials, labour, T&P and fixing the following vitreous
china Wash Down Water Closet(European type W.C. pan)with
integral 'p' or 's' trap to the floor with wooden plug and chromium
plated pedestal screws including jointing the trap with soil pipe in
cement mortar (1:1) fixing plastic seat and cover for wash down water
1076.00 closet with chromium plated brass hinges and rubber buffers including
polishing , cost & conveyance of all materials to worksite, payment of
royality, taxes etc. all complete as per P.H specification and direction
of the Engineer-in-charge
0.00
European water closet with 'S' trap plain (Hindware/Parryware/Neycer
1077.00
make) Hindware-20044 1.00 Each 2935.10 2,935.10
1078.00 Matrix set of Hindware - 70002 1.00 Sets 54955.00 54,955.00
Supplying all materials, labour T&P and fixing wash basins with hole
for pillar taps with cast iron or M.S.brackets painted white including
cutting holes in walls and making good the damages with supply of
wooden plugs, screws and cement etc, fixing pedestal for wash basin
recessed at the back for the reception of pipes and fittings, fixing PVC
waste pipe of 32mm nominal diameter for wash basin including brass
check nut complete, fixing pillar taps capstan head screw down high
1079.00 pressure lettered 'Hot' and 'Cold' with long screws, shanks and back
nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection
pipe and making connection with pillar cocks and supply mains for
wash basin, fixing 32mm dia CP brass waste, cost & conveyance of
all materials to worksite, payment of taxes etc. all complete as
perP.H specification and direction of the Engineer-in-charge
0.00 -
1080.00 Under Counter basin (560x450) Hindware-No.10049 27.00 Each 4264.00 1,15,128.00
1081.00 550x400mm WH Basin with pedestall (Jaquar/ Hindware/ Parryware) 4.00 Each 5798.80 23,195.20
Supplying all materials, labour, T&P for fitting & fixing plain edge
kitchen/wall sink of all standard sizes with a pair of bracket, C.P.
1082.00 waste, trap & P.V.C. waste pipe & painting brackets including supply
of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
1.00 Each 7589.00 7,589.00
Supplying all materials, labour, T&P and fixing mirror of superior glass
conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or
1083.00 plywood sheet and fixed to wooden plugs with CP screws and
washers complete as per specification an direction of the Engineer in
charge
1084.00 600mm x 450mm size B.E mirror 31.00 Each 679.10 21,052.10
Supplying all materials, labour, T&P and fixing standard sized glass-
shelf with CP brass brackets and guard rail complete fixed to wooden
1085.00
plugs with CP screws as per specification and direction of Engineer in
charge. 0.00
1086.00 600mmx125mm plate glass shelf with CP/NP guard rails. 2.00 Each 729.10 1,458.20
Supplying all materials, labour, T&P and fixing standard sized CP
towel rail complete with CP brass brackets fixed to wooden plugs with
1087.00
CP screws as per specification and direction of the Engineer in
charge
1088.00 25mm x 600mm long CP towel rail 2 Each 1030.70 2,061.40
1089.00 CP glass shelf with alluminium guard raIl 29 Each 483.96 14,034.84
1090.00 CP towel Ring 4 Each 546.90 2,187.60
Supplying all materials, labour, T&P and fixing CP soap holder
complete with CP brass brackets fixed to wooden plugs with CP
1091.00
screws as per specification and direction of the Engineer in charge
1092.00 SOAP DISPENSER WITH GLASS BOTTLE (Jaquar)ACN-MCH- 31 Each 1980.00 61,380.00
1093.00 CP Soap holder(Jaquar)CAN-CHR-1141N 4 Each 947.00 3,788.00
Providing & laying Plain Cement concrete (PCC ) of proportion
(1:3:6) in foundation and floors using 4cm (1½”) size clean hard black
crusher broken granite stone metal of approved quality and from
approved quarry including hoisting, lowering and laying concrete in
layers not exceeding 15 cm. (6”) thick to the required level ramming,
watering, curing etc. complete including cost, conveyance ,
1094.00 loading,unloading,royalties of all materials, cost of all labour,
Sundries, T&P required for the work including shoring, shuttering and
dewatering ( if required) including hire and running charges of water
pump required for the work etc complete in all respect excluding
GST as directed by the Engineer-in-charge.
Sl no Description Qty Unit Rate Amount
1095.00 In Ground Floor 4.85 Cum 5643.50 27,370.98
12 m.m thick cement plaster in cement mortar of mix (1:6) in all 0.00
floors at all height using screened & washed sharp river sand for
mortar with approved quality of cement, finished smooth to the even
surface of the brick masonry walls after racking out the joints
properly ,providing grooves wherever necessary including cost,
1096.00 conveyance, loading, unloading,stacking, royalties of all Materials,
cost of all Labour, T&P, Sundries , Scaffolding, Watering,
Curing,Rounding of corners etc. required for the work complete in all
respectas per specification excluding GST as directed by the
Engineer- in- charge.
0.00
1097.00 ground floor 203.07 Sqm 150.10 30,480.81
1098.00 First floor 79.15 Sqm 156.10 12,355.32
Supplying all materials, labour, T&P and providing dr. fixit (tarshild)
including watering, curing, conveyance of all materials to worksite,
1099.00 payment of royalty, taxes etc all complete as per specification and
direction of the Engineer in charge
-
1100.00 In Ground Floor 153.61 Sqm 837.70 1,28,679.10
1101.00 In 1st Floor 65.25 Sqm 837.70 54,659.93
Supplying all materials, labour, T&P and providing and filling cynder
including watering, curing, conveyance of all materials to worksite,
1102.00
payment of royalty, taxes etc all complete as per specification and
direction of the Engineer in charge -
1103.00 In ground Floor 33.20 Cum 555.75 18,450.90
1104.00 1st Floor 14.71 Cum 555.75 8,175.08
Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having 0.00
crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar
of mix (1:6) with approved grade cement and screened & washed
sand for mortar after immersing the bricks for 6 (Six) hours in water
before use in Superstructure including splays cutting, circular
moulding, corbelling, chamfering and similar such type of works,
1105.00
watering and curing etc. including cost, coveyance,stacking, loading,
unloading, royalties of all materials ,cost of all labour,scaffolding,
sundries and T&P required for the works complete in all respect as
per specification excluding GST as directed by the Engineer-in-
charge.
0.00
1106.00 ground floor 1.07 cum 5038.20 5,390.87
1107.00 First floor 0.45 cum 5331.20 2,399.04
Supplying all materials, labour,T&P and providing cement concrete
(1:1.5:3) for RCC work using 12mm HG chips including
1108.00
hoisting,laying,curring and conveyance of all materials to site etc
complete. -
1109.00 Ground floor 0.88 Cum 7497.30 6,597.62
1110.00 First floor 0.38 Cum 7831.80 2,976.08
Providing & fixing Thermo mechanically treated bars (Fe-500 D)
Reinforcement bars of approved make for RCC work of required
diameter & of approved quality including straightening, cutting,
bending, binding, welding , joining (if necessary), tying the grills,
hoisting, lowering and placing in position as per the approved design
& drawings with provision for fan hooks where required including the
cost, conveyance of reinforcement bars or tor steel and binding wires
of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess,
T&P, etc. required for the work complete for the work in all heights as
1111.00 per the specification & excluding GST as direction of Engineer-in-
Charge. (Linear measurements will be taken & quantity will be
calculated on standard weight. Weight of binding wire will not be
considered for measurement. No payment will be made for overlap,
couplings, welded joints spacer bars,stays, hangers and wastage.
Cost of these items shall be deemed to be included in the rates for
reinforcement) .
0.00
1120.00 In Ground Floor 174.55 Sqm 1326.80 2,31,592.94
1121.00 In First Floor 79.15 Sqm 1359.10 1,07,572.77
Providing Granite stone prepolished 20mm thick of area above 0.00
0.40 Sqm in flooring of approved quality, ccolour and size in floors,
treads on steps and landings in all floors at all height on 20mm thick
bed of cement mortar of mix (1:4) laid in proper slope and gradient
with screened and washed sharp sand for mortar and grouted with
neat white cement slurry jointing the tile with neat white cement slurry
mixed with required quantities of pigments of approved marks to
1122.00 match the shades of the granite tile if required watering and curing
for 21 days, including cost, conveyance, loading, unloading, royalties
of all materials, cost of all labour, sundries, T&P required for the work
including rubbing mechanically and wax polishing etc. complete in all
respect excluding GSTas per specification as directed by Engineer-in-
charge(Note- Sample of tiles shall be approved before procurement
and use.)
0.00
1123.00 ground Floor 8.78 sqm 2978.80 26,153.86
1124.00 First Floor 3.73 sqm 3002.10 11,197.83
Factory made single leaf Solid WPC (Wood polymer) composite door
shutter of 25mm thickcompacted with wood grain finish structural
foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be
used as core material for fitting the metal fittings such as tower bolts,
aldrops, handles etc shall be provided. A structural adhesive
compatible with (EPS) foam shall be used for bending the core
material, The material and process for manufacturing the door
1125.00 shutters shall conform to RV-TIFAC composites Design Centre's
standards and specifications and the door shutters Conforming to
relevant I.S.specification. The finish of door shutter will be plain colour
white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other
colour using high quality pigments. Three heavy whight mild steel butt
hinges type-I(ISI marked) size 100mm are to be fitted on one side of
shutter.
0.00 -
1131.00 Inside size 760mm x 760mm x 460mm 15 Each 10164.80 1,52,472.00
1132.00 Fitting and fixing RCPC cover slab (0.45m dia) 15 Each 1093.10 16,396.50
Construction of 40000 Litr.Capacity RCC Over head water
1133.00 storage tank(Domestic & Fire fighting)-In first floor of inside size-
6.50 X 4.000 X1.70m
Sl no Description Qty Unit Rate Amount
R.C.C. work of M-25 grade with 20mm and down grade black hard
black crusher broken granite stone chips of approved quality from
approved quarry including hoisting, lowering, laying and compacting
concrete, watering curing, and finishing the exposed surfaces smooth
with cost, conveyance, royalties, taxes of all materials with all
labour,labour cess and T & P required for the work etc. complete in all
1134.00 respect but excluding the cost and conveyance of M.S. rods or Tor
steel and binding wire of 18 to 20 gauge and labour charges for
straightening, cutting, bending, binding and tying the grills and placing
in proper position and as per spection and the direction of the
Engineer-in-charge.
0.00 -
1151.00 200mm dia PVC (sch-80) pipe 90.00 mtr 2660.37 2,39,433.24
Sl no Description Qty Unit Rate Amount
Supplying all materials, labour, T&P and providing and providing
sanitary sealing by cement concrete grouting of annular space around
GI/PVC/MS housing pipe upto 5m below ground level (as per
drawing) to plug the bore hole excluding cost of cement all complete
1152.00 as per direction of the Engineer in charge. Minimum one metre of
casing pipe to be inserted in the bore into the rock at the bottom to
ensure sanitary sealing (excluding cost of cement which will be
supplied directly by the department)
2.00 Each 366.30 732.60
Cleaning and developing the tube well with supply of compressor
worked till clear and adequate discharge is obtained from the tube
1153.00 well including supply and use of all necessary equipment and labour
as per direction of the Engineer in charge
0.00 -
1154.00 By DTH Rig 2.00 Each 8274.00 16,548.00
Supplying all materials, equipment, labour & conducting
reconnaissance survey, integrated Hydrological and Geophysical
(Electrical Resistivity Method) survey & selection of potential source
1155.00 for exploration of Ground Water including selection and
recommendation of site for drilling wells in selected locations in any
part of Orissa under the following Geological formation:
2.00 Each site 8500.00 17,000.00
Supplying all materials, labour, T&P and providing, fitting and fixing
submersible pump with squirrel cage induction type submersible type
submersible electric motor to run on 3 phase/1 phase line voltage
ranging from 320 volt to 450 volt conforming to IS: 8034/89 with
following specifications with suitable control panel, jointing with
1156.00 GI/PVC/HDPE pipes, electrification, testing, commissioning, trial
running, conveyance of all materials to worksite, payment of taxes etc
all complete as per specification and direction of the Engineer in
charge (Texmo/Crompton Greaves/Kirloskar make)
-
2 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr
1157.00 with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm
4.00 Each 19643.00 78,572.00
1158.00 DOL Control panel 3.00 Each 3805.50 11,416.50
1159.00 40mm dia steel short piece 2.00 Each 152.30 304.60
1160.00 Well cap 2.00 Each 152.30 304.60
1161.00 50mm size CI bracket 2.00 Pair 91.30 182.60
1162.00 2.50sqmm flat cable 250.00 Mtr 128.10 32,025.00
1163.00 Steel rope with cover 250.00 Mtr 26.70 6,675.00
1164.00 Labour charges for lowering including transportation 4 Each 2000.00 8,000.00
Supplying all materials, labour, T&P and providing and fixing to wall or
ceiling and floor HDPE pipes and pipe fittings conforming to IS:
4984/2000 (10kgf/sqcm) of the following nominal bore with clamps
1165.00 and jointing by Fusion welding method including testing, making good
the wall, ceiling and floor all complete as per specification and
direction of the Engineer in charge
0.00 -
1166.00 32mm HDPE pipes (Finolex/Supreme make) 215.00 mtr 105.30 22,639.50
Supplying all materials, labour, T&P and providing and fixing to wall or
ceiling and floor CPVC pipes of the following nominal bore and pipe
1167.00 fittings with clamps including making good the wall and testing as per
specification and direction of the Engineer in charge
-
1168.00 50mm dia CPVC pipe (sch-80) 10.00 Mtr 1158.40 11,584.00
Earth work in excavation of foundation trenches in all kinds of
soil including moorum, stoney earth and earth mixed with boulders
except sheet rock and boulders not requiring blasting including
dressing of sides and leveling the bed upto the required depth and
depositing the excavated materials away from the work site with all
1169.00
lead and lift including shoring, shuttering & dewatering (if required)
with cost of all Labour, Hire & Running charges of the water pumps,
Sundries, T & P required for the work complete in all respect
excluding GST as directed by the Engineer- in- charge.
81.00 Cum. 232.30 18,816.30
Supplying all materials, labour T&P and fitting and fixing
brass/CP/PVC fittings of the following nominal bore with supply of all
1170.00
joiniting materials complete as per specification and direction of the
Engineer in charge. -
1171.00 50mm dia Brass N. R. Valve 3 Each 3097.00 9,291.00
1172.00 50mm dia Brass Check Valve 1 Each 3097.00 3,097.00
Sl no Description Qty Unit Rate Amount
1173.00 50mm dia Brass F. W. Valve 2 Each 3801.80 7,603.60
Supplying all materials, labour, T&P and construction man hole
chamber of the following size with cement concrete(1:3:6) using
40mm size hard granite metal on bed, 1st class Fly ash brickwork in
cement mortar(1:6), moulding and shaping the channel inside and
benching with cement concrete (1:2:4) using 12mm size h.g
chips,12mmthick cement plaster (1:3) with punning to inside, cement
flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using
1174.00 12mm size h.g chips with RCPC man hole cover, earthwork in
excavation in all kinds of soil and refilling the cavity around the
chamber including watering, curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all complete as per approved
specification and direction of the Engineer in charge
-
1175.00 Inside size 910mm x 910mm x 910mm 15 Each 21459.05 3,21,885.77
1176.00 Addl depth 15 Each 1494.80 22,422.00
Supplying all materials, labour, T&P and constructing soakway pit of
the following size with precast RCC rings joined loose, gravel backing
in the rear of well steining, precast RCC cover slab in cement
concrete (1:2:4) using 12mm size hg chips fitted with iron lifting
handles including cutting hole in the rings for inlet pipe,earthwork in
1177.00 open well excavation in all kinds of soil and refilling of cavity around
the pit & painting the iron works, watering, curing, conveyance of all
materials to worksite, payment of royalty, taxes etc all complete as
per approved specification and direction of the Engineer in charge
-
1178.00 1.22m dia x 2.10m deep soakway pit 10 Each 21703.20 2,17,032.00
Supplying all materials, labour, T&P and laying in trenches (to level or
slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the
following outside dia for class–3(0.60mpa) including jointing with
supply of approved solvent cement by non-heat application method/as
per manufacturer’s specification, providing and laying in trench
1179.00 cement concrete (1:4:8) with 40mm size hard granite metal in the
Type C-1 standard bedding surrounding or encasing including
concrete for bedding and curing etc all complete as per PH
specification and direction of the Engineer in charge.
0.00 -
1180.00 110mm dia u-pvc pipe alround concrete 160.00 Mtr 1309.70 2,09,552.00
1181.00 160mm dia u-pvc pipe alround concrete 140.00 Mtr 2121.20 2,96,968.00
1182.00 200mm dia u-pvc pipe alround concrete 130.00 Mtr 2486.60 3,23,258.00
Supplying all materials, labour, T&P and constructing circular type
man hole chamber of the following size with cement concrete (1:4:8)
using 40mm size hard granite metal on bed, 1st class Fly ash
brickwork in cement mortar (1:5), moulding and shaping the channel
inside and benching with cement concrete (1:2:4) using 12mm size
h.g chips, 12mmthick cement plaster (1:3) with punning to inside,
1183.00 12mm thick cement plaster (1:3) to outside, R.C.C cover slab in
(1:2:4) using 12mm size h.g chips, earthwork in excavation in all kinds
of soil and refilling the cavity around the chamber including watering,
curing, conveyance of all materials to worksite, payment of royalty,
taxes etc all complete as per approved specification and direction of
the Engineer in charge
0.00 -
Circular MH inside dia 1200mmx1670mm with sides sloped
1184.00
upto560mm 15 Each 18507.10 2,77,606.50
1185.00 Construction 1 nos 200 users RCC Septic tank -
Earth work in excavation of foundation trenches in all kinds of
soil including moorum, stoney earth and earth mixed with boulders
except sheet rock and boulders not requiring blasting including
dressing of sides and leveling the bed upto the required depth and
depositing the excavated materials away from the work site with all
1186.00
lead and lift including shoring, shuttering & dewatering (if required)
with cost of all Labour, Hire & Running charges of the water pumps,
Sundries, T & P required for the work complete in all respect
excluding GST as directed by the Engineer- in- charge.
107.14 Cum. 232.30 24,888.62
Sl no Description Qty Unit Rate Amount
Supplying & Filling foundation trenches , plinth & ditches with clean
course river sand well watered and rammed in layers not exceeding
23 c.m. in depth with all lead and lift including cost, conveyance,
1187.00 loading, unloading, stacking,royalties and all taxes of sand,cost &
conveyance of water, cost of all Labour,labour cess,T&P required for
the work etc. complete in all respect as directed by the Engineer- in -
charge. 11.47 Cum. 508.60 5,833.64
Supplying all materials, labour, T&P and providing cement concrete (
1:4:8 ) with 4cm size crusher broken hard granite metal including
watering, curing, cost of all materials,conveyance of all materials to
1188.00
work site with payment of royalty, all taxes etc all complete as per
P.W.D specification and direction of Engineer-in-charge.
-
1189.00 Chambers 9.04 cum 5017.90 45,361.82
Supplying all materials, labour, T&P and providing cement concrete (
1:2:4 ) with 12mm size crusher broken hard black granite chips
including watering, curing,cost of all materials, conveyance of all
1190.00
materials to work site with payment of royalty, all taxes etc all
complete as per P.W.D specification and direction of Engineer-in-
charge -
1191.00 Chambers 4.00 cum 6804.40 27,217.60
Supplying all materials, labour, T&P and providing cement concrete
(1:1:5:3) with 12mm size hard broken granite chips for R.C.C works
including hoisting, laying, watering, curing, conveyance of all
1192.00
materials to worksite, payment of royalty, taxes etc all complete as
per specification and direction of the Engineer in charge
43.67 cum 7497.30 3,27,407.09
Supplying all materials, labour, T&P and providing rigid and smooth
centering and shuttering for R.C.C works including false work and
dismantling them after casting including conveyance of all materials to
1193.00
worksite, payment of royalty, taxes etc all complete as per
specification and direction of the Engineer in charge
-
1194.00 RCC floor roof, chajja etc 45.18 Sqm 676.90 30,582.34
1195.00 RCC Beam, Column, wall etc 132.70 Sqm 1022.00 1,35,619.40
1196.00 RCC Plinth bend/ Raft 0.00 -
1197.00 Base slab 2(12.20+4.70)x0.45 15.21 Sqm 234.70 3,569.79
Providing & fixing Thermo mechanically treated bars (Fe-500 D)
Reinforcement bars of approved make for RCC work of required
diameter & of approved quality including straightening, cutting,
bending, binding, welding , joining (if necessary), tying the grills,
hoisting, lowering and placing in position as per the approved design
& drawings with provision for fan hooks where required including the
cost, conveyance of reinforcement bars or tor steel and binding wires
of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess,
T&P, etc. required for the work complete for the work in all heights as
1198.00 per the specification & excluding GST as direction of Engineer-in-
Charge. (Linear measurements will be taken & quantity will be
calculated on standard weight. Weight of binding wire will not be
considered for measurement. No payment will be made for overlap,
couplings, welded joints spacer bars,stays, hangers and wastage.
Cost of these items shall be deemed to be included in the rates for
reinforcement) .