Professional Documents
Culture Documents
Ae2027 QB
Ae2027 QB
Ae2027 QB
COM
RAJALAKSHMI ENGINEERING COLLEGE
AERONAUTICAL DEPARTMENT
PART A
4. What is autoclave?
15. What are the equipments used to track the blades of a helicopter?
17. What are the basic requirements for functioning of a cabin pressurization and air
conditioning system?
18. Name the few precautions to be observed while handling hazardous materials.
25. What are the five basic requirement of hazard common program?
WWW.VIDYARTHIPLUS.COM V+ TEAM
WWW.VIDYARTHIPLUS.COM
45. What are the advantages of rigging?
50. What are the equipments required for analysis the operation of main rotor?
51. What are the points to the checked during LG operational check?
PART B
1. State the characteristics of a good weld & How ‘welded-patch repair’ is carried
out.
Welding Equipment’.
5. Describe the important guide lines for installation and rigging of control surfaces.
6. Explain the methods used for checking the track of the main rotor of a helicopter.
WWW.VIDYARTHIPLUS.COM V+ TEAM
WWW.VIDYARTHIPLUS.COM
7. Describe the inspections on fixed-gear and retractable landing gear carried out for
8. Write short notes on Fire Protection system and Ice Protection system.
maintenance.
servicing.
11. Explain in detail the various NDT methods used in aircraft maintenance.
14. Explain an typical example of the procedure used in the repair of a mat-molden
assembly.
16. Describe the various methods used in tracking the main rotor of a helicopter.
17. Write the procedure for servicing and maintenance of oxygen system in any
airplane.
19. Write in detail the safety precautions to be followed while storing and handling
hazardous materials.
WWW.VIDYARTHIPLUS.COM V+ TEAM
WWW.VIDYARTHIPLUS.COM
20. Explain the causes and remedial actions of the following defects:
21. Explain with diagram on position and warning system used in aircraft?
25. Explain inspection and maintenance of fixed and retractable landing gear?
WWW.VIDYARTHIPLUS.COM V+ TEAM
WWW.VIDYARTHIPLUS.COM
WWW.VIDYARTHIPLUS.COM V+ TEAM