Professional Documents
Culture Documents
17 To 20
17 To 20
Networking Essentials Module Group 5: Pretest Exam Answers Modules 1 - 4: Internet Connection:
Getting Online Pre-Test Exam
How to find: Press “Ctrl + F” in the browser and fill in whatever wording is in the question to Modules 5 - 8: Network Protocols and
5
find that question/answer. If the question is not here, find it in Questions Bank. Architecture Pre-Test Exam
Explanation: With out-of-band management, the only requirement is to have a computer Modules 13 - 16: Home Network
directly connected to the console port of the device. This is the primary method to configure a Basics Group Exam
new device because no network connection or prior configurations on the device is required. Module Group 5: Pre-Test & Exam
3. Which two ports can be used for the initial configuration of a Cisco router? (Choose Networking Essentials ( Version 2)
two.) – Networking Essentials 2.0 Final
Exam SD
AUX
console
WAN interface
flash slot
LAN interface Related Posts
15.1.3 Check Your Understanding – Security
Explanation: The AUX and console ports on a Cisco 1941 router can be used to perform Threats Answers
initial setup. The initial setup does not require that the router be connected to a network. A Module 19 – Build a Small Cisco Network Quiz
network administrator uses a computer to connect to the console ports directly. A network Answers
administrator can also access the router remotely through a dialup phone line and a modem
15.6.6 Check Your Understanding – Antimalware
connected to the AUX port. LAN and WAN interfaces are used to connect to networks. The Software Answers
flash slots expand storage capability through the use of a compact flash card.
8.1.2 Packet Tracer – Connect to a Web Server
Answers
4. When a router is powered on, where will the router first search for a valid IOS image to
19.4.5 Check Your Understanding – Identify the
load by default?
Default Gateway Answers
flash memory 3.4.3 Packet Tracer – Configure End Devices
NVRAM Answers
RAM
17.3.4 Check Your Understanding – Cisco
ROM Routers Answers
5. Refer to the exhibit. An administrator is trying to configure the switch but receives the
Recent Comments
error message that is displayed in the exhibit. What is the problem?
john lemmon on 2.2.13 Packet Tracer – Point-
to-Point Single-Area OSPFv2 Configuration
(Answers)
16. Which keys act as a hot key combination that is used to interrupt an IOS process?
Ctrl-Shift-X
Ctrl-C
Ctrl-Shift-6
Ctrl-Z
Explanation: The Cisco IOS provides both hot keys and shortcuts for configuring routers and
switches. The Ctrl-Shift-6 hot key combination is used to interrupt an IOS process, such as a
ping or traceroute. Ctrl-Z is used to exit the configuration mode. Ctrl-C aborts the current
command. Ctrl-Shift-X has no IOS function.
17. What function does pressing the Tab key have when entering a command in IOS?
Explanation: Pressing the Tab key after a command has been partially typed will cause the
IOS to complete the rest of the command.
18. While troubleshooting a network problem, a network administrator issues the show
version command on a router. What information can be found by using this command?
Explanation: The show version command displays much information about the device,
including the amount of memory (flash, NVRAM, and DRAM) that is installed on the device.
VLAN 99
FastEthernet 0/1
GigabitEthernet 0/1
VLAN 1
10. What is the effect of using the Router# copy running-config startup-config command
on a router?
11. A network administrator enters the service password-encryption command into the
configuration mode of a router. What does this command accomplish?
This command prevents someone from viewing the running configuration passwords.
This command automatically encrypts passwords in configuration files that are currently
stored in NVRAM.
This command provides an exclusive encrypted password for external service personnel who
are required to do router maintenance.
This command enables a strong encryption algorithm for the enable secret password
command.
This command encrypts passwords as they are transmitted across serial WAN links.
Explanation: The startup-config and running-config files display most passwords in plaintext.
Use the service password-encryption global config command to encrypt all plaintext
passwords in these files.
12. What happens when the transport input ssh command is entered on the switch vty
lines?
Explanation: The transport input ssh command when entered on the switch vty (virtual
terminal lines) will encrypt all inbound controlled telnet connections.
13. A small office uses a wireless router to connect to a cable modem for Internet access.
The network administrator receives a call that one office computer cannot access external
websites. The first troubleshooting step that the network administrator performs is to ping
the wireless router from the office computer. Which troubleshooting technique does this
represent?
substitution
bottom-up
top-down
divide-and-conquer
14. What are two common causes of a physical layer network connectivity problem?
(Choose two.)
Explanation: An Ethernet cable plugged into a wrong port and a faulty Ethernet cable are two
possible causes for physical network connectivity issues. An incorrect default gateway
configuration and a lack of an IP address will cause logical connectivity issues.
15. Refer to the exhibit. A web designer calls to report that the web server web-
s1.cisco.com is not reachable through a web browser. The technician uses command line
utilities to verify the problem and to begin the troubleshooting process. Which two things
can be determined about the problem? (Choose two.)
Explanation: The successful result of the ping to the IP address indicates that the network is
operational and the web server is online. However, the fact that the ping to the domain name
of the server fails indicates there is a DNS issue, namely that the host cannot resolve the
domain name to its associated IP address.
16. Which command would a technician use to display network connections on a host
computer?
ipconfig
nslookup
tracert
netstat
Explanation: The netstat command is a network utility that can be used to display active TCP
connections that are open and running on a networked host.
17. During normal operation, from which location do most Cisco switches run the IOS?
disk drive
flash
RAM
NVRAM
Explanation: When a Cisco switch is powered on, the IOS is copied into RAM. The switch
then runs the IOS from RAM, thus enhancing operating performance.
18. A technician is setting up a network in a new room. What is the best device to use to
connect the PCs to each other and to the rest of the LAN?
gateway
firewall
switch
router
19. What are two requirements when using out-of-band configuration of a Cisco IOS
network device? (Choose two.)
Subscribe
5 COMMENTS
During normal operation, from which location do most Cisco switches run the IOS?
RAM
NVRAM
flash
disk drive
Reply View Replies (1)
A technician is setting up a network in a new room. What is the best device to use to connect
the PCs to each other and to the rest of the LAN?
switch
firewall
router
gateway
Reply
What are two requirements when using out-of-band configuration of a Cisco IOS network
device? (Choose two.)