Professional Documents
Culture Documents
Kenya Science and Engineering Fair
Kenya Science and Engineering Fair
Kenya Science and Engineering Fair
CATEGORY: ENERGY
KENNEDY GATHECA
VENUE:
YEAR: 2O2O
Students’ Declaration
This project is pure work from our minds and hands; it is fully
owned by us. No one should copy us. It has never been
represented in previous science congresses.
Signature…………………………Date…………………………………….
Names…………………………………………………………………………….
Patron’s Declaration
I have checked this document and confirmed that it is good
for presentation. The work was done under my supervision.
Patron: …………………………………………………………….
Principal: ………………………………………………………….
Date: …………………………………………………..
Abstract
The project entails producing electricity from a
generator that uses pressure to convert crystal
energy, stored in certain crystals such as quartz
and barium titanate, into electrical energy. We
extracted many ideas and physics concepts from
the internet. We also got some ideas from the
physics book one and book four textbooks. We
were constantly consulting our science teachers
to help us in bringing up this project to life. From
the points and data that we collected we stored
them in form of short notes and videos. While
watching some videos in the internet, we came to
a conclusion that our ideas and project are not
fictional and can be done practically. Our aim for
these project, was to provide a cheap-alternative
environmental friendly method of electricity
production.
Acknowledgement
We would like to acknowledge the support, which
our patrons Mr. Philip and Mr. Mabonga gave to
us throughout the bringing up of our projects. We
deeply appreciate the great sacrifices you made,
coming at night, during your free time, to guide
us in our project. How you went all the way to
attend different workshops that dealt with
guiding students on how to create, build and
present their projects. We truly appreciate the
countless efforts you made following up our
progress and even helping us get the required
materials and necessities We would also like to
thank the almighty God, for gifting us the ability
and wisdom that helped us to create and build
this project.
Table of contents
CHAPTER 1: BACKGROUND INFORMATION
1.1 Introduction ………………………………………. Pg. 7
1.2 Statement of the problem …………………. Pg. 7
1.3 Objectives …………………………………………..Pg. 7
1.4 Relevance ……………………………………………
1.5 Advantages ………………………………………….
CHAPTER 3: METHODOLOGY
3.1 Apparatus used ……………………………………
3.2 Procedure ……………………………………………
3.3 Observation …………………………………………
3.4 Data ……………………………………………………..
CHAPTER 4: DATA ANALYSIS AND
PRESENTATION
4.1 Data presentation ………………………………….
4.2 Data analysis ………………………………………….