Professional Documents
Culture Documents
Delta Eng - Design Capabilities
Delta Eng - Design Capabilities
PRESSURE EQUIPMENT
for Oil & Gas and Power Generation
DESIGN CAPABILITY
Delta Engineering srl – Via Bastone 148/150 24044 Dalmine (BG) ITALY
www.deltaeng.it – Tel. +39 035.56.11.40 – info@deltaeng.it
SOFTWARE
PLANTS AND SKIDS DESIGN & DRAFTING
Autodesk AutoCAD P&I (last version)
Autodesk AutoCAD Plant 3D (last version)
Autodesk Structural Detailing (last version)
DESIGN CODES
ASME VIII Div.1 EN 13445 VSR WRC 107/297
ASME VIII Div. 2 EN 13480 VSG
ASME I EN 14015 PD5500
ASME B31.1 EN 1090 DIN EN 1594STEEL STRUCTURES
ASME B31.3 AS1210
ASME B31.8 GOST 14249
GOST 24755
RESOURCES
Steel Structures
Piping &
Pressure Vessels
Instrumentation &
Electrical
Various
Pressure Reduction Metering Station
GA Drawing – 3D Model
developed by Delta Engineering
STEEL STRUCTURES
Support Detail
Drawing
Compressor Skid
EXAMPLES OF CAPABILITIES Baseframe Assemby Drawing
Designed and fabricated in our Factory
▪ Mechanical Calculation
▪ FEA Analysis
▪ Nozzle Load Verification
▪ Piping Detail Drawing
▪ Pressure Vessels (if any) Construction Drawing
▪ Isometric Drawings
▪ Bill of Material
EXAMPLES OF CAPABILITIES
Designed and fabricated in our Factory
PROCESS DESIGN
EXAMPLES OF CAPABILITIES
▪ Thermal Design for S&T Heat Exchangers Designed and fabricated in our Factory
▪ Filtration Systems
▪ Burners
▪ Biogas Flares
Nr.24 Indirect Water Bath Heaters BEU Type S&T Heat Exchanger 80 tons Natural & Forced Draft Burner
▪ HMI Grafic
▪ SIS and Ex-i Loop Verification/Calculation Combustion Process (Burner + Skid + BMS)