Scribd Logo
Upload

Welcome to Scribd!

  • Ohlins - DTC - Einbauanleitung Oehlins Motorrad 22100 01

    Uploaded by

    Ángel Muñoz
    8 views4 pages
    This document provides instructions for installing an Öhlins race kit for a Honda CBR1000RR SP. The kit contains stickers, an adjustable end eye, and fork preload tubes. Installation requires following Öhlins workshop manuals and adjusting the end eye to no more than 6 turns from fully in. The fork legs are also modified by removing a 10mm collar and installing the included preload tubes to increase fork length and stroke. Installation must be done by approved Öhlins personnel and is warned to test ride at low speeds after installing the kit.

    Original Description:

    Original Title

    Ohlins_DTC_einbauanleitung-oehlins-motorrad-22100-01

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides instructions for installing an Öhlins race kit for a Honda CBR1000RR SP. The kit contains stickers, an adjustable end eye, and fork preload tubes. Installation requires following Öhlins workshop manuals and adjusting the end eye to no more than 6 turns from fully in. The fork legs are also modified by removing a 10mm collar and installing the included preload tubes to increase fork length and stroke. Installation must be done by approved Öhlins personnel and is warned to test ride at low speeds after installing the kit.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    8 views4 pages

    Ohlins - DTC - Einbauanleitung Oehlins Motorrad 22100 01

    Uploaded by

    Ángel Muñoz
    This document provides instructions for installing an Öhlins race kit for a Honda CBR1000RR SP. The kit contains stickers, an adjustable end eye, and fork preload tubes. Installation requires following Öhlins workshop manuals and adjusting the end eye to no more than 6 turns from fully in. The fork legs are also modified by removing a 10mm collar and installing the included preload tubes to increase fork length and stroke. Installation must be done by approved Öhlins personnel and is warned to test ride at low speeds after installing the kit.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 4

    Kit Contents

    Description Part No Pcs


    Sticker Öhlins wh/tr 01185-01 2
    Sticker Öhlins bl/tr 01185-04 2
    Adjustable end eye - 1
    Fork preload tube 143 mm 04763-30 2

    ⚠⚠ Warning! 11 Note!
    Only approved Öhlins personnel are Before you install this product, check the kit
    permitted to install this kit. The procedure contents. If anything is missing, please contact
    requires specific tools. This product is an Öhlins dealer.
    an important part of the vehicle and the
    vehicle stability. ⚠⚠ Warning!
    After you have installed the Öhlins product,
    take a test ride at low speed to ensure that the
    vehicle has maintained stability.

    Race kit for Honda CBR1000RR SP


    Öhlins FL 910 2014-2016

    22100-01
    Mounting Instructions
    MOUNTING INSTRUCTIONS
    1 Length adjustable end eye

    1.1
    See the Öhlins Workshop manual MC Road
    & Track shock absorber TTX for correct
    procedure.

    ⚠⚠ Warning!
    Do not turn the adjustable end eye to more
    than 6 turns from fully in. At this point the
    groove is just visible below the lock nut.

    1.2
    Remove the O-ring from the installed end eye.
    Install the O-ring on the new end eye.

    1.3
    Set the end eye to the wanted length.
    Tighten the lock nut to 40 Nm.

    2
    MOUNTING INSTRUCTIONS
    2 Fork +10 mm length/ stroke increase

    2.1
    See the Öhlins Workshop manual for OEM
    Front Forks for correct procedure.
    Remove the 10 mm collar on the shaft between
    the top out spring and the seal head.
    Install the preload tube supplied in this kit.
    Do the procedure for both fork legs.

    3
    Öhlins products are subject to To find the latest information Part no. MI_22100-01_0
    continuous improvement and contact an Öhlins distributor. Issued 2014-03-17
    development, therefore, although Please contact Öhlins if you have
    these instructions include the most any questions regarding the
    up-to-date information available at contents in this document.
    the time of printing, minor updates
    may occur.

    © Öhlins Racing AB. All rights Öhlins Racing AB


    reserved. Any reprinting or Box 722
    unauthorized use without the written S-194 27 Upplands Väsby, Sweden
    permission of Öhlins Racing AB Phone +46 8 590 025 00
    is prohibited. fax +46 8 590 025 80

    You might also like