Professional Documents
Culture Documents
29-11-2023-03-30-26-21437-AS1 - Engineering Mechanics
29-11-2023-03-30-26-21437-AS1 - Engineering Mechanics
NOTE:
Faculty members, please ensure except above listed subjects, no
theoretical elaborative question should be given in part 'c' of assignment
paper.
In Midterm 1, CO1 and CO2 will be covered, In Midterm 2, CO3 and CO4
and In Midterm 3, CO5 and CO6 will be covered. Faculties are required to
give questions accordingly. Marks details are mentioned above.
For the list of COs for the subject, please refer the unit wise syllabus. Link
for syllabus for various subjects is given in excel format, which you can
open from www.soapalam.com.
All the questions are compulsory for the students to attend.
Date of
Type of Exam Mid Term 1 23-11-2023
Submission
Last Date of
Assignment
Name of Faculty PRANAV KUMAR 15-Dec-23
Submission by
Students
Engineering
Batch Twenty-four & Twenty-five Subject
Mechanics
Part A
FOR MIDTERM 1 - Part A: Total number of questions to be given are eight (4 from CO1
and 4 from CO2), all the questions are compulsory to attend, each carrying 2 Marks.
FOR MIDTERM 2 - Part A: Total number of questions to be given are eight (4 from CO3
and 4 from CO4), all the questions are compulsory to attend, each carrying 2 Marks.
FOR MIDTERM 3 - Part A: Total number of questions to be given are eight (4 from CO5
and 4 from CO6), all the questions are compulsory to attend, each carrying 2 Marks.
Lesson Plan Topic: Resultant, force system and various Source: File and
No.:1 laws Notes
Question: 2 What are various methods to find resultant of forces acting on a body?
Lesson Plan Topic : Resultant, force system and various Source: File and
No.:1 laws Notes
Lesson Plan No.: Topic: Resultant, force system and various Source: File and
4 laws Notes
Lesson Plan No.: Topic: Resultant, force system and various Source: File and
5 laws Notes
Part B
FOR MIDTERM 1 - Part B: Total number of questions to be given are six (3 from CO1 and
3 from CO2), all the questions are compulsory to attend, each carrying 6 Marks.
FOR MIDTERM 2 - Part B: Total number of questions to be given are six (3 from CO3 and
3 from CO4), all the questions are compulsory to attend, each carrying 6 Marks.
FOR MIDTERM 3 - Part B: Total number of questions to be given are six (3 from CO5 and
3 from CO6), all the questions are compulsory to attend, each carrying 6 Marks.
Explain Parallelogram law and derive its formula to find resultant of two
Question: 1
force system and angle made by the resultant with any one force.
Lesson Plan No.: Topic: Resultant, force system and various Source: File and
1 laws Notes
Question: 2
Lesson Plan No.: Topic: Resultant, force system and various Source: File and
2 laws Notes
Question: 3
Lesson Plan Topic: Resultant, force system and various Source: File and
No.:5 laws Notes
Question: 4
Resolve the each relevant angles required for solving the problem.
Question: 5
Question: 6
Part C
FOR MIDTERM 1 - Part C: Total number of questions to be given are six (3 from CO1 and
3 from CO2), all the questions are compulsory to attend, each carrying 8 Marks.
FOR MIDTERM 2 - Part C: Total number of questions to be given are six (3 from CO3 and
3 from CO4), all the questions are compulsory to attend, each carrying 8 Marks.
FOR MIDTERM 3 - Part C: Total number of questions to be given are six (3 from CO5 and
3 from CO6), all the questions are compulsory to attend, each carrying 8 Marks.
5. CHOOSE COURSE OUTCOME (CO) NUMBER ACCORDING TO
CO 1
THE TYPE OF MIDTERM, AS PER INSTRUCTIONS ABOVE.
Question: 1
Lesson Plan No.: Topic: Resultant, force system and various Source: File and
1 laws Notes
A string is tied to two point at the same level and a smooth ring of weight W,
which can slide freely along the string, is pulled by horizontal force P. If, in the
position of equilibrium the portions of the string are inclined at 60° and 30° to
the vertical. Find the value of P and the tension in the string.
Question: 2
Lesson Plan No.: Topic: Resultant, force system and various Source: File and
2 laws Notes
Question: 4
Draw the FBD with proper labelling of forces and angle. Given AB=406mm
and radius of the spheres are 152m.
Question: 5
Draw the FBD for the loads acting at P and Q. Further, just balance the
loads in Horizontally and Vertically for the loads at P and Q.
Question: 6