Professional Documents
Culture Documents
QCR W 2033
QCR W 2033
QCR W 2033
LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.
SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
ITEM RE-INSP
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A
No. DATE
A General:
WPSs and PQRs used for repair/build-up/buttering was approved JERES-W-011
A1 by Company Representative. Para. 8.1.1
Welders are qualified in accordance with ASME SEC IX and
JERES-W-011
A2 JEREP-324, for all welding, including tack, temporary, and repair
Para. 9.1
welds.
Welder(s) have been issued Job Clearance Card, and that range
A3 of qualification shown matches the application of WPS being used.
JEREP-324,
Page 1 of 2
QCR FORM NUMBER DATE APPROVED QR NUMBER
QUALITY CONTROL REPORT
Buttering and / or Weld Build-up QCR-W-2033 WELD-
PROJECT TITLE PACKAGE NUMBER CONTRACTOR / SUBCONTRACTOR
LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.
SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
ITEM RE-INSP
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A
No. DATE
Buttering of joints between disimilar metal joints requires prior
JERES-W-011
A6 approval by Company Representative. Approval is obtained
Para. 12.3.5.2
through the welding procedure review process.
REMARKS:
REFERENCE DOCUMENTS:
1. JERES-W-011, Welding Requirements for On-Plot Piping (10'February'2010)
2. JEREP-324, Certification Review and Registration of Project Welders and Brazers.
Page 2 of 2