Professional Documents
Culture Documents
Vie-X088 - QG English
Vie-X088 - QG English
com
VIE-X08S/VIE-X088
quick guide
About operation
● This unit can be operated by touch operation by simply touching the screen, and can be operated using an optional
remote control (RUE-4208). This manual uses touch operations as an example. For remote control operation, please
refer to the instruction manual.
● This manual uses illustrations/screens of VIE-X08S as examples. The operation is the same for VIE-
X088.
The main unit switch is a switch located at the bottom of the main unit panel, and is operated when calling up the menu, etc.
<VIE-X08S> <VIE-X088>
switch switch
Open and close the display. Press for more than 2 seconds to display the angle Display the menu screen.
adjustment screen.
switch
switch
Display the destination menu screen.
Adjust the volume of audio/visual sources.
switch switch
Displays the main screen of the audio/visual source. Press and Display the current location screen.
hold for 2 seconds or more to turn the audio/visual source ON/ When pressed on the vehicle position screen, audio guidance will be output (only during
OFF. route guidance). Also, change the current location display method.
switch
Displays the AV source menu screen. Press for more than 2
seconds to turn off the power of this unit.
advice
● Touch switch common to each screen
: Exit the current screen and return to the original mode (navigation, audio/visual, etc.)
i will be back.
: Return to the previous screen. Depending on the function, the operation performed on the screen you touched may be canceled.
may occur.
● By pressing the switch, you can display the map screen of your current location from any screen.
2
operating instructions Power ON/OFF
Note
● Do not display a static screen for long periods of time. If you display the same image for a long time, the image
may remain on the screen.
advice
● You can also turn off the power by pressing for more than 2 seconds. To turn on the power
, Press any other switch.
● Immediately after turning on the power, the screen may be dark and difficult to see, but it will display normally after a few minutes. In
addition, the screen (liquid crystal panel) may have a small number of pixels missing or constantly lit pixels among all effective pixels, but
3
operating instructions Adjust the display angle, insert and remove DVDs, CDs, and SD memory cards
Operate when inserting or ejecting a DVD/CD/SD memory card. You can also adjust the display angle
in 6 steps to make it easier to view.
1 Press
The display will open.
Press
Or insert a disc and the display will close
automatically.
SD memory card slot
advice
● If you adjust the display angle, closing the display will return it to the adjusted angle.
Four
operating instructions Names and operations of each part, how to switch menu screens
Menu operation
main body switch Press to display the menu screen. Navigation such as destination search
You can perform operations related to , information/communication-related operations, and settings for the device.
1 Press
A menu screen will be displayed.
Perform operations such as ETC and map updates. You can do it.
You can
Five
Translated from Japanese to English - www.onlinedoctranslator.com
<Display example>
Main screen
sub screen
6
operating instructions Decide where to go, set destination and explore route
- - - - - - - - - - - - - - - - - - - - - - or ---------------------- Four
Touch [Destination].
1-2 Press
Five
Touch [Start guidance].
Touch [Destination].
7
operating instructions How to view the screen and how to guide your destination
This section explains the map screen displayed during route guidance and the enlarged map displayed during intersection guidance.
Go to multi-gate screen
Go to route screen *
At intersections and junctions where information is available in the map data, various enlarged guide maps are displayed.
advice
● In addition to the intersection/highway junction guidance, enlarged maps such as "highway entrance guide map," "highway junction guide map," and
For operations ① and ②, see "Using a hands-free phone" - "Connecting a mobile phone" in the instruction manual. ,
Please refer to "Settings/Edit" - "Telephone settings" - "Communication function settings". Here we will
explain step 3, inputting the authentication information for NAVI. Please enter the ID (email) and
password issued when you register in the User's Room.
1 Press Four
Touch [ID].
3 [Always NAVI] Tap the tab. Return to the authentication information setting screen.
8 Touch [Done].
Your credentials will be verified. Confirmation complete
The drive info screen displays various information useful for driving, such as eco guide and vehicle information.
The drive info screen is Call from the button.
1 Press
A menu screen will be displayed.
touch
camera footage
navigation
Images from an optional camera are displayed.
A map is currently displayed.
will appear.
While driving the route, use a simple plan
Eco guide is Through a technical partnership with Pivot, etc. will be displayed.
Based on the vehicle's acceleration, etc., the driver's If you have not set a route,
We independently diagnose your eco-driving level. The line name/current location name will be displayed.
advice
● You can also display the drive info screen from the multi-gate screen.
Ten
operating instructions receive a call, hang up a call
By connecting your mobile phone using BLUETOOTH or a communication cable (sold separately), you can use it as a
hands-free phone. Here, we will explain the operations from receiving an incoming call to disconnecting the call as an
example.
2 Touch [Start].
The call will begin.
advice
● When the other party's phone number is notified and the other party's name and phone number are registered in the phonebook, the other
party's name and phone number will be displayed. If the caller is not registered in the phonebook, the other party's phone number will be
displayed.
1 I touch.
The call screen will be displayed.
2 Touch [Exit].
A message will be displayed and the call will end.
advice
● For other hands-free phone operations such as "making a call" and "loading the phonebook," see "Using a
hands-free phone" in the instruction manual.
11
operating instructions Switch audio/visual sources
1 Press
The AV source menu screen will be displayed.
2 desired audio/visual
Touch the source.
The selected audio/visual source main screen will be
displayed.
advice
● If a USB memory or iPod/iPhone is not connected to this unit, you cannot select the USB memory or iPod/
iPhone.
12
Basic operations on the audio/visual main screen
When you touch the digital terrestrial TV reception screen, the digital terrestrial TV operation screen will be displayed.
Preset display/
Information display switching
preset switch
Display the stored station name
Display. When you touch
Call a broadcast station. Tat
If you continue to touch the
broadcast station to that switch.
I will remember.
Mode display
Return
Broadcasting station name/program information display
13
■ Operate the radio geo
Album name/
artist name
Find the beginning of the song currently playing/ Skip to next song/fast forward
If the playback time is less than 1 second,
Elapsed playback time
Skip to previous song/fast rewind
advice
● The same operations as MP3/WMA/AAC can be performed for CDs, iPod/iPhone, USB memory, or SD
memory cards. Please refer to the instruction manual for details.
14
■ Operate HDD AUDIO DIO
HDD AUDIO operation screen 1/2
Find the beginning of the song currently playing/ Skip to next song/fast forward
If the playback time is less than 1 second,
Find the beginning of the song currently playing/ Switch operation switch
If the playback time is less than 1 second,
Play/Pause
/album/playlist /album/playlist
Skip to next song/fast forward cue cue
Title N
Display the mode switching screen. Displays the image quality adjustment screen
safe drive
● Specifications and appearance are subject to change without notice for improvement.
● The photos and illustrations in this manual may look different from the actual product depending on the shooting and printing conditions.