Professional Documents
Culture Documents
MSDAC Brochure
MSDAC Brochure
(DACF-730)
Phase reversal type axle detectors with trackside electronic axle counting equipment.
Principle of Operation:
Ÿ Each track section has Axle Detectors along with their field units installed at both limiting ends.
Ÿ The field units counts the number of axles when train passes over their detection point. The field units are
connected with Central Evaluator by means of ½ Quad Cable.
Ÿ The stored wheel counts as well as health of the field units are continuously transmitted to Central Evaluator
by means of telegram packets.
Ÿ The Central Evaluator receives the packets from all the electronic field units and evaluates vacancy status of
different track sections and generates vital output for each section.
System Description:
The MSDAC System consist of several components. Some of these component are located in the field and some
are at the station, the description of these Components is as follows:
Ÿ Unaffected by 4/6 spoke push trolley. Ÿ Section wise non resettable counter for recording
reset.
Ÿ Can be customized as per yard layout.
Centralized DC to DC Converter:
Ÿ Capable of generating 8/16 channels of 96VDC,
required for field units in case of centralized power
supply is used.
Ÿ Overload/short circuit protection for individual
channels.
Ÿ Works on 24VDC input supply.
Configuration Terminal:
Ÿ User Friendly configuration tool for configuring
system in factory or at site.
Ÿ Configuration using Windows based GUI tool.
Ÿ Can be used with any commercial desktop
computer using serial port.
Serial Cable
DACF-730
Modular Design:
Ÿ DACF-730 offers facility to user to upgrade their system as per requirement.
Ÿ Cost effective solution to convert 8DP model up to 40 DP by adding various modules as per requirement.
Ÿ Dual detection/redundancy can be incorporated at site with same or different evaluator housing.
Ÿ No OEM intervention is required for upgradation.
Ÿ Reduced inventory since most of components are similar to that of existing SSDAC & HASSDAC, Axle
detectors, Modem Card etc.
Module 2 Module 2
{
DC TO DC CONVERTER 1
DC TO DC CONVERTER 1
DC TO DC CONVERTER 2
DC TO DC CONVERTER 2
DC TO DC CONVERTER 1
DC TO DC CONVERTER 2
CONFIGURATION CARD
CONFIGURATION CARD
BLANK PLATE
BLANK PLATE
BLANK PLATE
BLANK PLATE
BLANK PLATE
BLANK PLATE
BLANK PLATE
BLANK PLATE
BLANK PLATE
EM08-1
EM08-2
EM08-3
EM08-1
EM08-2
EM08-1
{
{
{
Module 1 Module 1 Module 1 Module 3
{
{
DC TO DC CONVERTER 1
DC TO DC CONVERTER 1
DC TO DC CONVERTER 2
DC TO DC CONVERTER 2
CONFIGURATION CARD
CONFIGURATION CARD
EM08-1
EM08-2
EM08-3
EM08-4
EM08-5
EM08-1
EM08-2
EM08-3
EM08-4
{
{
{
{
{
DACF-730/32DP DACF-730/40DP
UP
TS 2
DP 3 DP 4 TS 4
TS 1
TS 3
DP 1 DP 2 DP 5 DP 6
DP 12 DP 11
DP 8 DP 7
DP 10
DP 9
DN
Configurations:
The MSDAC can be configured through the Configuration Card as per yard layout in different track sections as
given below:
Ÿ Two detection points Single section: In straight line.
Ÿ Three/Four detection points Single section: In point zone.
Ÿ Multiple detection points single section: In ladder.
Ÿ Consecutive single section in a straight line: Auto block.
Ÿ Intermediate block signalling
DACF-730
TS 1 DP 2
TS 1 DP 2
DP 1 DP 3
DP 1 DP 3
DP 4
DP 2 TS 3 DP 6 DP 10
TS 1 DP 3 DP 7
DP 4 DP 8 TS 2
DP 1
DP 5 DP 9
SP 2T
SP 1T
TS 1 TS 3 TS 5
Station A Station B
DP 1 DP 2 DP 4 DP 3 DP 6 DP 5 DP 8 DP 7 DP 10 DP 9 DP 12 DP 11
TS 2 TS 4
TS 2
IBH TS 3
{
{
2
DP 1 Data
1 2
2
DP 2 2 Central Evaluator
Reset Unit
2
DP 3 3
Vital
Relays
Monitoring Unit
Power
2
DP 16 2
16
High Voltage DC-DC Converter
MSDAC-730/16DP System
Ordering Information:
SNO DESCRIPTION QTY
Multi Section Digital Axle Counter system (MSDAC) as per RDSO Specification
1 No-RDSO/SPN/176/2005 version 2.0 or latest suitable for monitoring 1 System
8/16/24/32/40 Detection Points* consisting of the following:-
Central Evaluator (CE-501 ) unit consisting of
DC-DC Converter card (Part No73054 Rev B) – 2 No’s
a 1 no
Event Logger Card (Part No 73056 Rev D) – 1 No’s
Configuration Card (Part No 73055 Rev A) – 1 No’s
b Evaluator Module card (Part No 73050 Rev B) for 8 DPs As required*
c Relay Driver Card (Part No 584-1) for 8 Vital Outputs As Required*
Field Unit FU-220 Consiting of
Signal Conditioning card 1 & 2 (Part No – 596-1)
Dual MLB Card (Part No – 22754 Rev A)
d As Required*
Modem card (Part No 699)
DC to DC Card (Part No – 678 (96VDC) or Part No 22092 Rev 2(24VDC))PDCU
Unit Model No PDCU – 230 (Part No675-1 )
e Pre Wired Relay Rack MSDAC 730 1 No.*
SM’s Reset Panel RP-601 consisting of
Power Supply Card (Part No 73049 Rev B) – 1 No
f As Required*
Reset card for 8 Input (Part No 73067 Rev C) -
Yard Layout on Reset Panel (Optional Supply only on Order)*
g Vital Relays As Required
2 Toolkit for Multi Section Digital Axle Counter 1 Set
3 Monitoring Unit (optional) 1 No
4 Configuration Terminal (Optional) 1 No
Note*:- The quantity have to be given by Railways or to include Yard Layout so that quantity will be calculated