Professional Documents
Culture Documents
Wiper Arm and Blade Assembly - Handling Guideline
Wiper Arm and Blade Assembly - Handling Guideline
Wiper Arm and Blade Assembly - Handling Guideline
No DESCRIPTION PAGE
1 SCOPE 2
2 APPLICATION 2
3 REFERENCES 2
4 TERMINOLOGY 2
5 OWNERSHIP 2
8 REVISION HISTORY 15
Page 1 of 15
1 SCOPE:
This guideline provides information on the care that has to be taken on wiper arm and
blade assembly for good quality wiping performance in service in all environmental
condition. This document explains do’s and don’t’s with pictorial illustration on the wiper
arm and blade assembly care.
2 APPLICATION:
All wiper arm and blade assembly that is used in vehicles
3 REFERENCES:
This standard is developed based on project Know-How and lessons learnt.
4 TERMINOLOGY:
Standards terms and definitions used as per current engineering and industry practices.
Page 2 of 15
DO’s Dont’s
It is advisable to clean the windshield glass It is not advisable to clean the windshield with
every day morning. Clean the extreme mud and extreme mud and dust accumulated condition.
dust with Non-Fibrous cloth and cleaning tool This damages or cuts the wiper blade rubber
from the windshield glass and operate the element causing poor wiping performance
wiper system
DO’s Dont’s
Page 3 of 15
It is not advisable to rest the wiper system on
It is advisable to protect the vehicle with the windshield under direct sunlight for longer
protection cover if the vehicle has to be in idle duration during the vehicle in idle condition or
and parked in open condition for longer days parked condition. The UV radiation and ozone
DO’s Dont’s
Page 4 of 15
It is not advisable to rest the wiper system on
It is advisable to keep open the wiper arm from the windshield under direct sunlight for longer
windshield glass if the vehicle is in open duration during the vehicle in idle condition or
parking , idle and exposed to hot sun for longer parked condition. The UV radiation and ozone
DO’s Dont’s
Page 5 of 15
It is not advisable to rest the wiper system on
It is advisable to protect the wiper arm and the windshield under direct snow for longer
windshield glass by snow protection cover if duration during the vehicle in idle condition or
the vehicle is in open parking , idle and exposed parked condition. The wiper rubber element
to snow for longer duration time. geometry gets damaged due to snow
accumulation.
DO’s Dont’s
Page 6 of 15
It is not advisable to touch and wiper blade
It is advisable to handle the wiper blade with
rubber element with oily, and grease hands. The
clean hands which is free from oil and grease
wiper rubber element gets damaged due to oil
for good and recommended life of the wiper
and grease leading to poor performance of
performance.
wiping quality
DO’s Dont’s
Page 7 of 15
It is not recommended to clean the wiper blade
It is always recommended to clean the wiper
rubber element with heavy or hard cloth which
blade element for any residual removal with
damages the wiper blade rubber element
damped paper towel or with micro fibrous cloth
causes poor performance of wiping quality.
DO’s Dont’s
Page 8 of 15
It is not recommended to use washing soda
powder, detergents, hair shampoo and other
It is always recommended to use the OEM chemicals mixture with water to clean the
recommended windshield washing fluid windshield glass. These chemicals will damage
the wiper blade rubber element leading to poor
performance of wiping quality.
DO’s Dont’s
Page 9 of 15
It is not advisable to apply any undue or
It is always recommended to handle the wiper unwanted pressure on wiper arm assembly and
arm and wiper blade assembly gently during wiper blade assembly during assembly or in
assembly or during regular wind shield glass service or during regular windshield glass
cleaning or in service. cleaning. This damages the wiper system
leading to poor performance of wiping.
DO’s Dont’s
Page 10 of 15
It is not advisable to touch and hold the wiper
It is always recommended to handle the wiper
blade rubber element during assembly or in
blade assembly with harness or by the arm
service. This damages the wiper blade rubber
piece strip as shown above during assembly or
element leading to poor performance of wiping
in service.
quality.
DO’s Dont’s
Page 11 of 15
It is not recommended to use oil or grease on
It is always recommended to clean the wiper
the linkages of wiper arm and blade assembly.
blade element for any residual removal with
This damages the wiper blade rubber element
damped paper towel or with micro fibrous cloth.
leading to poor performance of wiping quality.
DO’s Dont’s
Page 12 of 15
It is always recommended to clean the It is not recommended to operate the wiper
windshield regularly or every day to remove the system with oily smears, dirt, traffic pollution
oily smears, dirt, traffic pollution film and bird film and bird drops on the windshield. This
drops for prolonged and good wiping damages the wiper blade rubber element
performance leading to poor performance of wiping quality.
It is recommended to clean the tree drops It is not recommended to operate the wiper
before operating the wiper system for good system with tree drops. This damages the wiper
wiping quality performance. system.
DO’s Dont’s
Page 13 of 15
It is recommended to replace the wiper blade It is not recommended to operate the wiper
assembly 30000 kms once or 6 months once or system with streaking, chattering and split
when the quality performance of the wiper blade rubber. This leads to poor visibility and irritant
is poor for clean wiping performance. during driving.
DO’s Dont’s
Page 14 of 15
It is not recommended to operate the wiper
It is recommended to replace the wiper blade
system when smearing observed which leaves
assembly for good quality performance of the
un-wiping zone. This is due to aging or physical
wiper blade
damage of the wiper blade assembly.
7 REVISION HISTORY:
Page 15 of 15