Professional Documents
Culture Documents
MXR Csp036 Manual
MXR Csp036 Manual
MXR Csp036 Manual
DIRECTIONS SPECIFICATIONS
The Il Diavolo Overdrive, designed in collaboration POWER
Input Impedance .315 MΩ
• Run a cable from your guitar The Il Diavolo Overdrive is
with premier Italian pedal designer Carlo Sorasio, to the CSP036’s INPUT jack powered by one 9-volt battery Output Impedance <5.1 kΩ
features a classic circuit that’s been hot-rodded and run another cable from the (remove bottom plate to install), Noise Floor* -90 dBV
for enhanced midrange and low end frequencies. CSP036’s OUTPUT jack to a 9-volt AC adapter such as the
™ Tone Control ± 5 dB at 1 KHz
your amplifier. Dunlop ECB003, or the DC Brick
Thanks to the Hi/Low switch, this pedal gives • Set all controls to their
™
and Iso-Brick power supplies. Gain Control** ~+50 dB at 1 KHz
you access to a wide range of symmetrical and 12 o’clock position. Bypass True Hardwire
asymmetrical tones, from a smooth organic boost • Turn the effect on by Current Draw <4.3 mA
to sweet, smoky overdrive to full on grind. depressing the footswitch. Power Supply 9 volts DC
• Rotate DRIVE knob clockwise to *Volume at Max. Tone and Gain at mid.
increase amount of overdrive or **Gain at Max. Hi/Lo switch at mid.