Professional Documents
Culture Documents
Invention Spotting For Defeathering Final
Invention Spotting For Defeathering Final
Stainless steel/Non-corrosive
material
- 4 pcs. equally positioned
FRAME POST in every corners of the None None None
frame the purpose is to
holding the detachable
plucking chamber
Groove Type
- Diameter: 76.2 mm
WHEEL CASTER None None Movable caster
- 4 pcs. welded on each
post of the frame
- PIPE Black plastic water pipe with a water pipe ( made of soft plastic
diameter of 20mm (installed at material), located at a central
the top of the plucking chamber position of the top end of the a high temperature
supported by two hooks, outer cylinder sterilizing device
surrounding the inner top of the (cleaning device)
plucking chamber
- Hole diameter: 3mm
Hole spacing 25 cm
None
- USES WATER YES Yes
TANK
yes
- USES WATER YES Yes
NONE
- PUMP
YES Yes
None
ELECTRICAL Yes,
HEATING WIRE penetrates inside None
the water tank
4 pcs T-Lock
-equally-spaced along the outer
diameter of the removable
Plucking chamber fixed to the Plucking chamber fixed to Plucking chamber fixed to the
T-LOCK plucking chamber
casing/frame the casing/frame casing/frame
-to hold the detachable plucking
chamber
PRESSURE GAUGE 150 PSI monitor water pressure None None None
- Fixed/Welded in the
frame
- convex
- diameter of 560 mm
- non-corrosive materials
(stainless steel 304)
- Wall thickness of 2 mm
- Drilled by four holes Depilation Machine is arranged
ROTATING
- Center spaced at 6 cm below the outer cylinder Rotating tumbling device,
DEFEATHERING Bearing plate, no specs
using four hex bolt with a ** Specifications are not specs not specified
PLATE
diameter of 10 mm mentioned
- a stainless round bar with
a diameter of 10 mm was
welded at the edge of the
plate
- 14 cm from the edge
was welded by a rolled
flat bar
TRANSMISSION SYSTEM
a. ELECTRIC YES
MOTOR TO 1.5 HP ELECTRIC
Yes
THE MAIN MOTOR YES Not mentioned /specified
Unspecified
SHAFT 1.1 kilowatts with rated rpm
of 1740
a. THE MAIN
Yes
SHAFT YES Not mentioned /specified Yes
Unspecified
b. DRIVE AND
DRIVEN Yes
YES Not mentioned /specified Yes
PULLEY Unspecified
c. SHAFT
Yes
DIAMETER YES Not mentioned /specified Yes
Unspecified
BELT