Professional Documents
Culture Documents
Centiel PremiumTower 10 To 60kW Technical Specification REV04
Centiel PremiumTower 10 To 60kW Technical Specification REV04
PremiumTower™
WI-4-00049-REV04-EN-280119 ENGLISH
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Table of content
1 Information on this document ...................................................................................... 4
1.1 Validity................................................................................................................. 4
1.2 Nomenclature ....................................................................................................... 4
2 PremiumTower™ The Basics......................................................................................... 5
2.1 General Description ............................................................................................... 5
2.2 PremiumTower™ Frames and Power Size ................................................................ 6
3 Futures & Benefits Highlights........................................................................................ 7
3.1 UPS Highlights ...................................................................................................... 7
3.2 UPS Block-Diagram ............................................................................................... 8
4 Technical Characteristics .............................................................................................. 9
4.1 Mechanical Dimensions and Installation .................................................................. 9
4.2 Electrical Characteristics .......................................................................................13
4.3 Control Panel .......................................................................................................22
4.4 Connectivity ........................................................................................................23
5 Electrical Installation ...................................................................................................25
5.1 Terminal Connections Overview ............................................................................25
5.2 Single Input Feed (Standard Connection) ...............................................................26
5.3 Dual Input Feed (Optional) ...................................................................................28
5.4 Single input feed connection (standard) .................................................................32
5.5 Dual input Feed Connection (Option) .....................................................................38
Page 2 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Legal Provisions
This manual and the information contained in it is the property of Centiel SA. Any partial or
complete publication, requires prior written approval by Centiel SA.
Internal reproduction used solely for the purpose of product evaluation or other proper use is
allowed and does not require prior approval.
Trademarks
All trademarks are recognized, even if not explicitly identified as such. Missing designations do
not mean that a product or brand is not a registered trademark.
The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc.
Centiel SA
Continuous Power Availability
Page 3 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Revision Notes
REV01 First English Version Released
REV02 Several enhancements
REV03 Draft with PT 80 / 100 / 120 / 160 / 200 / 250 (not released)
REV04 Modified REV02 with PT10 / 20 / 30 / 40 / 60
Technical Specifications in this document are designed to provide answers to tender filing out
and end user requirements.
1.1 Validity
This document is valid for the following device types:
1.2 Nomenclature
Page 4 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
From three phases output 10 to 60kW and one phase output 10 to 30kVA, PremiumTower
provides the best solution for small and medium data centers, comms rooms, IT networks and
any mission critical application demanding high availability and unbeatable energy efficiency.
PremiumTower offers built-in internal batteries from 10 to 60kW minimizing the footprint
utilization, eliminating extra costs for external battery frames and avoiding complex installation.
The flexibility in the number of battery blocks (30 to 50) allows the system designer to optimize
costs vs autonomy time.
At the same time, the high efficiency of 96.6% in double conversion (VFI) and 99.4% in Ultra-
safe ECO mode guarantees maximum energy savings and the lowest Total Cost of Ownership.
Page 5 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Dimensions
520 x 1725 x 800
(WxHxD) mm
Page 6 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
✓ Increases availability
3” User Graphical LCD Interface
✓ Simplify system configuration, troubleshooting
✓ More comprehensive information
Actively controlled fan ventilation
✓ Anticipate unexpected malfunctioning
✓ Change only when needed (<TCO)
Page 7 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Page 8 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
4 Technical Characteristics
4.1 Mechanical Dimensions and Installation
Max Power
10/10 20/20 30/30 40/40 60/60 10/10 20/20 30/25
kVA/kW
Internal
80 80 - - - 80 80 80
batteries***
Dimensions
350 x 1’075 x 800
(WxHxD) mm
Weight empty
80 kg
frame*
* w/o Batteries,
** with 7Ah batteries
*** 7/8/9 Ah
Page 9 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Max Power
30/30 40/40 60 / 60
kVA/kW
Internal
160 160 160
batteries***
Dimensions
520 x 1725 x 800
(WxHxD) mm
Weight empty
105 kg
frame*
* w/o Batteries,
** with 7Ah Batteries
*** 7/8/9 Ah
Page 10 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
PT010-I080-D0
PT020-I080-D0
PT030-E-D0
PT040-E-D0
PT060-E-D0 225 694.5 277.6 702.5 30
PT010-31-I080-D0
PT020-31-I080-D0
PT030-31-I080-D0
PT030-I160-E0
PT040-I160-E0 396.6 697 358 705
PT060-I160-E0
The position inside the room for PremiumTower™ must take a clearance distance of at least
200mm from the sides and back.
For UPS with internal batteries it is suggested to keep a side distance of at least 500mm in
order to facilitate battery control to service personnel.
It is possible to reduce the side clearances if the room is provided with rear air extraction, or if
the warm air can be easily evacuated on the rear of the UPS.
Page 11 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
This will avoid an increasing of the battery temperature caused by the influence of the warm air
ejected by the UPS.
It is possible to reduce the distance between the UPS and the Battery Cabinet sides if the room
is provided with rear air extraction, or if the warm air can be easily evacuated on the rear.
UPS
Y Cabinet Y
UPS
Battery Cabinet
Y1 Cabinet Y
Page 12 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
PT010-31 PT020-31
Module Type PT030-31 PT030 PT040 PT060
PT010(33) PT020(33)
Air flow with 100% load [m3/h] 240 240 240 390 390 390
Page 13 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Total Harmonic
Distortion (THDI)
≤2% @ 100% load
linear loads ≤2.5% @ 75% load
≤3.5% @ 50% load
Non-linear loads < 5%
Page 14 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Page 15 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Adjustable Float charging voltage 2.22 to 2.38V per Cell (no temp. compensation available)
Adjustable minimum battery voltage 1.55 to 2v per Cell (no load compensation available)
Ripple free
Connection +/N/-
125
25
100
20
75
15
50
10
25
05
0
0 20 40 60 80 100 120
Load [%]
Page 16 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
6 1 36 1 x 40 1 x 40
7 1 40 1 x 40 1 x 40
11 1 50 1 x 50 1 x (1x50)
15 2 30 2 x (1x40) 2 x (1x40)
21 2 40 2 x (1x40) 2 x (1x40)
6 2 36 2 x (1x40) 2 x (1x40)
7 2 40 2 x (1x50) 2 x (1x50)
7 2 30 2 x (1x40) 2 x (1x40)
9 2 34 2 x (1x40) 2 x (1x40)
12 2 40 2 x (1x40) 2 x (1x40)
Page 17 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
6 2 48 3 x (1x50) 3 x (1x50)
8 3 38 3 x (1x40) 3 x (1x40)
13 3 50 3 x (1x50) 3 x (1x50)
14.5 4 40 4 x (1x40) 4 x (1x40)
PT030 and 9 Ah batteries @ 25 °C (cosφ 0.9 load)
Autonomy (min) # Strings # Blocks/String Set of Batt Batt Links
Tray
5 2 36 2 x (1x40) 2 x (1x40)
10 2 50 2 x (1x50) 2 x (1x50)
12 3 36 3 x (1x40) 3 x (1x40)
15 3 44 3 x (1x50) 3 x (1x50)
19.5 4 40 4 x (1x40) 4 x (1x40)
PT040 and 7.2 Ah batteries @ 25 °C (cosφ 0.9 load)
Autonomy (min) # Strings # Blocks/String Set of Batt Batt Links
Tray
6 3 44 3 x (1x50) 3 x (1x50)
8 3 50 3 x (1x50) 3 x (1x50)
9 4 40 4 x (1x40) 4 x (1x40)
PT040 and 9 Ah batteries @ 25 °C (cosφ 0.9 load)
Autonomy (min) # Strings # Blocks/String Set of Batt Tray Batt Links
5 2 46 2 x (1x50) 2 x (1x50)
10 3 44 3 x (1x50) 3 x (1x50)
12 3 48 3 x (1x50) 3 x (1x50)
13.5 4 40 4 x (1x40) 4 x (1x40)
PT060 and 9 Ah batteries @ 25 °C (cosφ 0.9 load)
Autonomy (min) # Strings # Blocks/String Set of Batt Tray Batt Links
5 3 46 3 x (1x50) 3 x (1x50)
6 3 50 3 x (1x50) 3 x (1x50)
7 4 40 4 x (1x40) 4 x (1x40)
Page 18 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Outputpower @
10 20 25 10 20 30 40 60
cosϕ1 load [kW]
Output current @
43 87 130 14.5 29 43.5 58 87
400/230V [A]
Output voltage
220V; 230V; 240V 380/220V; 400/230V; 415/240V
(selectable) [V]
Total Harmonic
Distortion (THDU)
Linear load in normal mode < 1%
Linear load in battery mode < 1%
Non-linear load ≤ 3%
Output voltage stability
Static ± 1%
Up to 120% Continuous
Page 19 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Power Consumption @
93 W 118 W 118 W 145 W 145 W 145 W
0% load (UPS on inverter)
Power Consumption @
37.7 W 44.6 W 44.6 W 68.4 W 68.4 W 68.4 W
0% load (UPS on bypass)
Power Consumption module off
10.2 W 10.2 W 10.2 W 16.5 W 16.5 W 16.5 W
(only power supply on)
Efficiency AC-AC = DC-AC (±0.5% tolerance applies)
25% cosϕ 1 load [%] 95.90
Audible Noise with 100% Load [dBA] <39 <40 <40 <40 <40 <65
Ambient
Operation temperature 0 – 40°C
Recommended operation temperature for
20 – 25°C
UPS with internal batteries
Page 20 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Accessibility
Power cables connection Rear / Bottom
For PT030/040/060-I160 Front / Bottom
Connectivity connections Rear
For PT030/040/060-I160 Front
4.2.8 Standards
PT010-31 PT020-31
PT030-31 PT030 PT040 PT060
PT010(33) PT020(33)
Safety EN 60950-1 / EN 62040-1
EMC EN 62040-2
Input and output low-frequency
EN 61000-2-2
disturbances compatibility
Low voltage directive 2014/35/EU
Performance EN 62040-3
Environmental aspects EN 62040-4
Product certification CE
Degree of protection IP20
Page 21 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Button Description
Enter
Page 22 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
4.4 Connectivity
The option interface provides inputs and outputs dry-port contacts, allowing maximum 30W(VA)
switching power by rated voltage and current of 125VAC/60VDC/1A, with spring terminal blocks
for cable size from 0.2 to 1.0 mm2.
The UPS is equipped with 2 slots which allows to insert a SNMP and an Option as an extension
dry-ports board including parallel communication port.
For detailed connection, please refer to Cumuluspower™ User & Operation Manual
4.4.2 SNMP
The Simple Network Management Protocol (SNMP) is a typical worldwide standardized
communication protocol and is used to monitor the status of the UPS in the network via simple
control language. The SNMP adapter can act as interface for environmental monitor of devices
installed in the UPS room as doors open, ambient temperature, emergency systems controls
and so on (PRO version). Typically, is also used as Remote Console Command Module (RCCMD)
for a multi-server shutdown.
The UPS is equipped with a slot allowing an easy installation of the SNMP card which may be
configured via serial connection, Telnet or HTTP (Web Browser). The SNMP adapter can
manage the full parallel system; each single module can be monitored or the whole system as a
stand-alone UPS.
Page 23 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
CS141 Basic
order code 00-
00015
• CS141 PROFESSIONAL
• CS141 Professional with ModBus RS 485 and I/O options
Notice! CS141 BDG does not support environmental and external sensors.
CS141 Professional
order code 00-
00014
CS141 Professional
with MODBUS
order code 00-
00016
Page 24 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
5 Electrical Installation
The input, output and battery wires must be provided by the customer and the connection must
be performed only by authorized electrician or by qualified technical personnel.
The commissioning can be performed only by authorized engineer. For more details please refer
to the PremiumTower™ User & Operation Manual.
3x16mm2
PT030-E-D0 3x16mm2 3x16mm2 3x16mm2 3x16mm2 3x16mm2
allows 25 mm2
3x16mm2
PT040-E-D0 3x16mm2 3x16mm2 3x16mm2 3x16mm2 3x16mm2
allows 25 mm2
3x35mm2
PT060-E-D0 3x35mm2 3x35mm2 3x35mm2 3x35mm2 3x35mm2
allows 50 mm2
Page 25 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Page 26 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Page 27 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
The dual input feed option has to be chosen during the ordering
Notice! of the PT. This is a factory installed option.
Page 28 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
batteries charging
voltage 3 x
230/400V
Input fuses 3 x gl-gG or CB 16A 32A
3x
Page 29 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
3 x 230/400V
charging batteries
voltage
400V
400V
Page 30 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Page 31 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Label Description
1PE/2PE/4PE Connect earth cable
Input
1/2 L1 Input Rectifier and Bypass L1
1/2 L2 Input Rectifier and Bypass L2
1/2 L3 Input Rectifier and Bypass L3
N Input N
Output
N Output N
3L1 Output L1
3L2 Output L2
3L3 Output L3
3PE Output Earth
Battery
+ Positive battery pole (for external batteries)
Battery N Battery middle point (for external batteries)
- Negative battery pole (for external batteries)
Page 32 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Label Description
1PE/2PE/4PE Connect earth cable
Input
1/2 L1 Input Rectifier and Bypass L1
1/2 L2 Input Rectifier and Bypass L2
1/2 L3 Input Rectifier and Bypass L3
N Input N
Output
N Output N
3L1 Output L1
3L2 Output L2
3L3 Output L3
PE Output Earth
Battery
+ Positive battery pole
Battery N Battery middle point
- Negative battery pole
Page 33 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Label Description
1PE/2PE/4PE Connect earth cable
Input
1/2 L1 Input Rectifier and Bypass L1
1/2 L2 Input Rectifier and Bypass L2
1/2 L3 Input Rectifier and Bypass L3
N Input N
Output
N Output N
3L1 Output L1
3L2 Output L2
3L3 Output L3
PE Output Earth
Battery
+ Positive battery pole
Battery N Battery middle point
- Negative battery pole
Page 34 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
5.4.4 PT060-E-D0
Label Description
3 x PE Connect earth cable
Battery
+ Positive battery pole
Battery N Battery middle point
- Negative battery pole
Input
1/2 L1 Input Rectifier and Bypass L1
1/2 L2 Input Rectifier and Bypass L2
1/2 L3 Input Rectifier and Bypass L3
N,N Input and Output Neutral
Output
3L1 Output L1
3L2 Output L2
3L3 Output L3
Page 35 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
5.4.5 PT060-I160-E0
Label Description
3 x PE Connect earth cable
Battery
+ Positive battery pole
Battery N Battery middle point
- Negative battery pole
Input
1/2 L1 Input Rectifier and Bypass L1
1/2 L2 Input Rectifier and Bypass L2
1/2 L3 Input Rectifier and Bypass L3
N,N Input and Output Neutral
Output
3L1 Output L1
3L2 Output L2
3L3 Output L3
Page 36 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Label Description
4 x PE Connect earth cable
Battery
+ Positive battery pole
Battery N Battery middle point
- Negative battery pole
Input
1/2 L1 Input Rectifier and Bypass L1
1 L2 Input Rectifier L2
1 L3 Input Rectifier L3
1N, 3N Input and Output Neutral
Output
3L1 Output L1
Page 37 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Label Description
1PE/2PE/3PE/4PE Connect earth cable
Input
1L1 Input rectifier L1
2L1 Input bypass L1
1L2 Input rectifier L2
2L2 Input bypass L2
1L2 Input rectifier L3
2L3 Input bypass L3
N Input N
Output
N Output N
3L1 Output L1
3L2 Output L2
3L3 Output L3
3PE Output Earth
Battery
+ Positive battery pole (for external batteries)
Battery N Battery middle point (for external batteries)
- Negative battery pole (for external batteries)
Page 38 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Label Description
1PE/2PE/3PE/4PE Connect earth cable
Input
1L1 Input rectifier L1
2L1 Input bypass L1
1L2 Input rectifier L2
2L2 Input bypass L2
1L2 Input rectifier L3
2L3 Input bypass L3
N Input N
Output
N Output N
3L1 Output L1
3L2 Output L2
3L3 Output L3
PE Output Earth
Battery
+ Positive battery pole
Battery N Battery middle point
- Negative battery pole
Page 39 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Label Description
1PE/2PE/3PE/4PE Connect earth cable
Input
1L1 Input rectifier L1
2L1 Input bypass L1
1L2 Input rectifier L2
2L2 Input bypass L2
1L2 Input rectifier L3
2L3 Input bypass L3
N Input N
Output
N Output N
3L1 Output L1
3L2 Output L2
3L3 Output L3
PE Output Earth
Battery
+ Positive battery pole
Battery N Battery middle point
- Negative battery pole
Page 40 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
5.5.4 PT060-E-D0
Screw terminals for conductor size 35 mm2. On Input and Output
Notice! lines. These terminals allow the connection of 50 mm2 without
ferrule
Label Description
3 x PE Connect earth cable
Battery
+ Positive battery pole
- Negative battery pole
Battery N Battery middle point
Input
1L1 Input rectifier L1
2L1 Input bypass L1
1L2 Input rectifier L2
2L2 Input bypass L2
1L2 Input rectifier L3
2L3 Input bypass L3
N,N,N Input and Output Neutral
Output
3L1 Output L1
3L2 Output L2
3L3 Output L3
Page 41 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
5.5.5 PT060-I160-E0
Screw terminals for conductor size 35 mm2. On Input and Output
Notice! lines. These terminals allow the connection of 50 mm2 without
ferrule
Label Description
3 x PE Connect earth cable
Battery
+ Positive battery pole
- Negative battery pole
Battery N Battery middle point
Input
1L1 Input rectifier L1
2L1 Input bypass L1
1L2 Input rectifier L2
2L2 Input bypass L2
1L2 Input rectifier L3
2L3 Input bypass L3
N,N,N Input and Output Neutral
Output
3L1 Output L1
3L2 Output L2
3L3 Output L3
Page 42 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Label Description
4 x PE Connect earth cable
Battery
+ Positive battery pole
Battery N Battery middle point
- Negative battery pole
Input
1 L1 Input Rectifier L1
1 L2 Input Rectifier L2
1 L3 Input Rectifier L3
1N, 3N Input and Output Neutral
2 L1 Input bypass L1
Output
3L1 Output L1
Page 43 of 44
PremiumTower™ Technical Specifications – WI-4-00049-REV04-EN
Centiel SA
Continuous Power Availability
Page 44 of 44