Professional Documents
Culture Documents
Scala 1 3-45 Technical Submittal2022
Scala 1 3-45 Technical Submittal2022
TECHNICAL SUBMITTAL
GRUNDFOS SCALA 1
www.marjangroup.com
pumps@marjangroup.com
CONTENTS
SCALA1 3-45
SCALA1 is a fully intergrated, compact self-priming, pressure
booster for domestic use. It can communicate with Grundfos
GO Remote app via built-in Bluetooth technology enabling high
customisation options.
35 70
30 60
25 50
20 40
15 30
10 20
5 10
Eta pump+motor = 30.3 %
0 0
0 0.2 0.6 1.0 1.4 1.8 2.2 2.6 3.0 3.4 3.8 4.2 4.6 Q [m³/h]
P1 NPSH
[W] [m]
800 20
600 15
400 10
200 5
P1 = 894.8 W
NPSH = 3.83 m
0 0
1/7
Submittal Data
316
263
170.5
202 466
Materials:
Pump housing: Composite
Impeller: Composite
2/7
Company name: Marjan Factory For fiberglass company
Created by: Maher Ramadan
Phone: 0557519941
Email: Pumps@marjangroup.com
Date: 04/06/2022
Qty. Description
1 SCALA1 3-45
The Grundfos SCALA1 is a self-priming, multistage pump, that incorporates all the components of a pressure booster
into a compact composite enclosure.
As it is self-priming, the SCALA1 can pump water from a level below the pump.
Provided it is filled with water, the pump can lift water from a depth of 8 m in less than 5 minutes.
This facilitates easy installation and start-up of the pump and provides more reliable water supply in installations
where there is a risk of dry running and leakages in suction hose or pipes.
SCALA1 can communicate with Grundfos GO app via built in Bluetooth, which enables detailed pump monitoring and
high customization options, making this pump a good fit for every application.
The pump has a built-in motor protection that will stop the pump if exposed to excessive temperature due to high
ambient temperature, in case of seizure or overload, thus preventing a motor burnout.
With Grundfos GO you can easily setup SCALA1 as a Twin booster system, operating as duty/stand by as well as
duty/assist. It is also possible to add external input control and schedule a pump operation via calendar function.
SCALA1 require no maintenance, but it is recommended to keep the pump clean, check the non-return valves and
keep the ventilation holes free of dust.
45
40
35 70
30 60
25 50
20 40
15 30
10 20
5 10
1000 25
800 20
600 15
400 10
200 5
P1 = 894.8 W
NPSH = 3.83 m
0 0
Model: A
15 30
Start pressure: 220 kPa
Materials:
10 20
Pump housing: Composite
Impeller: Composite 5 10
Installation:
Eta pump+motor = 30.3 %
Range of ambient temperature: 273 .. 328 K 0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Q [m³/h]
Maximum operating pressure: 0.8 MPa
P1 NPSH
Maximum permissible inlet pressure: 0.3 MPa [W] [m]
Type of inlet connection: R 1000 25
316
263
170.5
466
202
316
SCALA1
Installation and operating instructions
SCALA1
Table of contents
English (GB)
Installation and operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Български (BG)
Упътване за монтаж и експлоатация. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Čeština (CZ)
Montážní a provozní návod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Deutsch (DE)
Montage- und Betriebsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Dansk (DK)
Monterings- og driftsinstruktion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Eesti (EE)
Paigaldus- ja kasutusjuhend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Español (ES)
Instrucciones de instalación y funcionamiento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Suomi (FI)
Asennus- ja käyttöohjeet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Français (FR)
Notice d'installation et de fonctionnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Ελληνικά (GR)
Οδηγίες εγκατάστασης και λειτουργίας . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Hrvatski (HR)
Montažne i pogonske upute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
Magyar (HU)
Telepítési és üzemeltetési utasítás. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
Italiano (IT)
Istruzioni di installazione e funzionamento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
Lietuviškai (LT)
Įrengimo ir naudojimo instrukcija . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338
Latviešu (LV)
Uzstādīšanas un ekspluatācijas instrukcija . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363
Nederlands (NL)
Installatie- en bedieningsinstructies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388
Polski (PL)
Instrukcja montażu i eksploatacji . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414
Português (PT)
Instruções de instalação e funcionamento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439
Română (RO)
Instrucţiuni de instalare şi utilizare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465
Srpski (RS)
Uputstvo za instalaciju i rad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490
Русский (RU)
Паспорт, Руководство по монтажу и эксплуатации. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 515
Svenska (SE)
Monterings- och driftsinstruktion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543
Slovensko (SI)
Navodila za montažo in obratovanje . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 568
Slovenčina (SK)
3
Návod na montáž a prevádzku. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 593
Table of contents
Türkçe (TR)
Montaj ve kullanım kılavuzu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 618
Українська (UA)
Інструкції з монтажу та експлуатації . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 643
中文 (CN)
安装和使用说明书 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 669
日本語 (JP)
取扱説明書 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 693
한국어 (KO)
설치 및 작동 지침 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 717
Bosanski (BS)
Montažne i pogonske upute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 741
Bahasa Indonesia (ID)
Petunjuk pengoperasian dan pemasangan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 766
Қазақша (KZ)
Орнату жəне пайдалану нұсқаулықтары . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 791
Macedonian (MK)
Упатства за монтирање и ракување . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 816
Malaysia (MY)
Cara pemasangan dan pengendalian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 845
Norsk (NO)
Installasjons- og driftsinstruksjoner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870
(AR) العربية
تعليمات التركيب و التشغيل. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 895
ไทย (TH)
คำแนะนำในการติดตั้งและการใชงาน . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 919
Tiếng Việt (VI)
Hướng dẫn lắp đặt và vận hành. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 945
Français (CA)
Notice d'installation et de fonctionnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 970
Español (MX)
Instrucciones de instalación y operación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 996
Íslenska (IS)
Uppsetningar- og notkunarleiðbeiningar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1023
4 SCALA1
English (GB) Installation and operating instructions
English (GB)
Original installation and operating instructions 15.10 Twin booster system fault finding . . . . . . . . . . . . . . . . 24
Table of contents 15.11 Fault resetting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
14. Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Observe these instructions for explosion-proof products.
15. Fault finding . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
15.1 Grundfos Eye SCALA1 . . . . . . . . . . . . . . . . . . . . . . 21
15.2 The pump does not start . . . . . . . . . . . . . . . . . . . . . 22
15.3 The pump is not running . . . . . . . . . . . . . . . . . . . . . 22 A blue or grey circle with a white graphical symbol
indicates that an action must be taken.
15.4 The pump is running. . . . . . . . . . . . . . . . . . . . . . . . 23
15.5 The pump cuts out during operation . . . . . . . . . . . . . . 23
15.6 The pump performance is insufficient . . . . . . . . . . . . . 23 A red or grey circle with a diagonal bar, possibly with a
15.7 The pump starts and stops too frequently . . . . . . . . . . . 24 black graphical symbol, indicates that an action must not
15.8 The pump does not stop . . . . . . . . . . . . . . . . . . . . . 24 be taken or must be stopped.
15.9 The pump gives electric shocks . . . . . . . . . . . . . . . . . 24
5
English (GB)
1 5
2
1
TM075340
750
3 Nameplate
17
4 Plug for access to pump shaft
5 Priming plug
Example of nameplate
6 Outlet connection
7 Inlet connection
Pos. Description
8 Drain plug
1 Type designation
9 External input connection
2 Product number
10 Twin connection
3 Serial number
The product is suitable for pressure boosting of clean water in 7 Nominal flow rate
domestic water-supply systems. 8 Max. ambient temperature
9 Enclosure class
2.3 Pumped liquids
10 Max. operating pressure
DANGER
Explosion risk 11 Max. liquid temperature
Death or serious personal injury Minimum and maximum rated
‐ Do not use the product for flammable liquids such as 12
power
diesel oil, petrol or similar liquids. The product must
only be used for water. 13 Model
14 Voltage and frequency
WARNING
Electric shock 15 Approvals
Death or serious personal injury 16 Product QR code
‐ Do not use the product for aggressive liquids. The Minimum and maximum rated
product must only be used for water. 17
current
WARNING
Toxic material
Death or serious personal injury
‐ Do not use the product for toxic liquids. The product
must only be used for water.
6
2.4.2 Type key for SCALA1 The maximum inlet pressure depends on the head at the actual
English (GB)
Example: duty point. The sum of the inlet pressure and the head must not
exceed the maximum system pressure.
SCALA1 . 5- . 25 . 1x230V . 50 Hz . SCHUKO
We recommend installing a pressure-relief valve to protect the
pump so that the outlet pressure does not exceed the maximum
Description system pressure.
SCALA1 Type range
3 5. Mechanical installation
Max. flow rate [m3/h]
5 WARNING
25 Electric shock
Death or serious personal injury
35
Max. head [m] ‐ Switch off the power supply before you start any work
45
on the product. Make sure that the power supply
55 cannot be switched on accidentally.
1x230V
Voltage [V] WARNING
1x115V
Electric shock
50 Hz Death or serious personal injury
Frequency [Hz]
60 Hz ‐ Mount the product horizontally to avoid condensation
in the electrical insulation inside the control box.
SCHUKO (Type E/F)
No plug WARNING
Thailand (Type O) Chemical hazard
Australia (Type I) Plug type Death or serious personal injury
UK (Type G) ‐ Before the pump is used for supplying drinking water,
US (Type NEMA 5-15, NEMA 6-15) flush the pump thoroughly with clean water.
Argentina (Type I) WARNING
Biological hazard
3. Receiving the product Death or serious personal injury
‐ Before the pump is used for supplying drinking water,
3.1 Inspecting the product flush the pump thoroughly with clean water.
On receipt of the product, do the following:
5.1 Positioning and mounting the product
1. Check that the product is as ordered.
If the product is not as ordered, contact the supplier. Always place the product in a horizontal position. A higher
inclination can cause electric shock due to condensation
2. Make sure that the supply voltage and frequency correspond to in the electrical insulation inside the control box.
the values stated on the product nameplate.
1. Place the product in a horizontal position with a maximum
3.2 Scope of delivery inclination angle of ± 5 °. The base plate must face downwards.
The box contains the following items:
2. Fasten the product to a solid horizontal foundation by means of
• 1 Grundfos SCALA1 pump screws through the holes in the base plate.
• 1 quick guide
• 1 safety instructions booklet.
4. Installation requirements
4.1 Location
The product can be installed both indoors and outdoors.
Please observe the following:
TM075005
7
English (GB)
TM075004
A
Base plate
[mm (in)]
A 135 (5.3) 1
2
B 163 (6.4)
TM075341
3
C 174 (6.9)
Pos. Description
Always loosen and tighten the union nuts on the inlet and
1 Inlet and outlet port
outlet ports by hand. Damage to the inlet and outlet parts
increases the risk of leakage. 2 Union nut
3 Pipe fitting
We recommend that you install isolating valves on the
inlet and outlet side of the pump. 5.2.1 Inlet and outlet pipes
Follow these general precautions when connecting the inlet and
1. Turn the union nuts by hand to loosen the inlet and outlet ports. outlet pipes.
2. Seal the pipe fittings with thread sealing tape. Do not let the pump support the pipes. Use pipe hangers
or other supports at proper intervals to provide pipe
3. Carefully screw the inlet and outlet connections onto pipe fittings support near the pump.
using a pipe wrench or a similar tool. Keep the union nut on the
pipe fitting if you have removed it from the pump. The pump is
equipped with flexible connections, ± 5 °, to facilitate the The internal diameter of the pipes must never be smaller
connection of inlet and outlet pipes. than the diameter of the pump ports.
4. Fasten the connections to the inlet and outlet ports by holding
the connection with one hand and tightening the union nut with • Install the pipes so that air pockets are avoided, especially on
the other hand. the inlet side of the pump.
• Use eccentric reducers with the tapered side down.
• Make sure the pipes are as straight as possible to avoid
unnecessary bends and fittings. We recommend long-radius 90
° pipe bends to decrease friction loss.
• Run the inlet pipe as direct as possible and, ideally, make sure
that the length is at least ten times the pipe diameter.
• If possible, run a horizontal inlet line. We recommend a gradual
upward slope for pumps operating in suction-lift conditions.
• A short pipe must be of the same diameter as the inlet port or
larger.
• A long pipe must be one or two sizes larger than the inlet port,
depending on the length.
TM040338
8
English (GB)
TM075387
Correct pipe sizing for connection to the pump inlet or outlet
H
TM075383
In case the highest tapping point is higher than the values in this
table, the external input may be used.
9
5.3 Installation examples 5.3.2 Suction from a tank
English (GB)
2
2
3
3 4
1
5
A
6
H1
TM075007
5 4
Pos. Description
H2
6
TM075006
10
5.3.3 Mains water pressure boosting 5.3.4 Inlet pipe length
English (GB)
The overview below shows the different possible inlet pipe lengths,
In some countries, boosting from the city water mains is
depending on the vertical pipe length. The overview is only intended
prohibited. Please follow local regulations regarding this
as a guide.
application.
L
1
7 3 9 4
H
10
5 6
2
TM075262
3
Pos. Description
1 Highest tapping point
2 Pipe hangers and supports
Inlet pipe length
3 Isolating valves
4 Flexible hoses
DN 32 DN 40
5 Bypass valve
H L H L
Optional pressure-reducing valve on the inlet side if the
6 [m (ft)] [m (ft)] [m (ft)] [m (ft)]
pressure can exceed 8 bar (115 psi).
0 (0) 68 (223) 0 (0) 207 (679)
Optional pressure relief valve on the outlet side if the
7
installation cannot withstand the outlet pressure. 3 (10) 43 (141) 3 (10) 129 (423)
Drip tray. Install the pump on a small stand to prevent the 6 (20) 17 (56) 6 (20) 52 (171)
8
ventilation holes from being flooded.
7 (23) 9 (30) 7 (23) 26 (85)
9 Pressure gauge
8 (26) 0 (0) 8 (26) 0 (0)
10 Mains water pipe
Pre-conditions:
Maximum flow velocity: 1 l/s (16 gpm).
Inside roughness of pipes: 0.01 mm (0.0004 in).
11
6. Electrical connection 2. Loosen the two screws holding the cable clamp and pull the
English (GB)
cable through.
WARNING
3. Thread each individual wire to the correct terminal.
Electric shock
Death or serious personal injury 4. Tighten the terminal screws and the cable clamp screw. Make
‐ Switch off the power supply before you start any work sure not to overtighten the cable clamp screw.
on the product. Make sure that the power supply
cannot be switched on accidentally.
1
2
WARNING 3
Electric shock
Death or serious personal injury
4
‐ The protective earth (PE) of the power outlet must be
TM072505
connected to the protective earth of the pump. The
plug must have the same PE connection system as
the power outlet.
‐ Example, plug wiring
Pos. Description
All electrical connections must be carried out by qualified
1 PE: Earth, yellow and green wire
persons in accordance with local regulations.
2 N: Neutral, blue wire
If the power cable is damaged, it must be replaced by the 3 L: Live, brown wire
manufacturer, the manufacturer's service partner or a 4 Cable clamp
similarly qualified person.
6.3 Motor protection
Make sure that the electrical installation supports the rated
current [A] of the product. See the nameplate of this The pump incorporates current- and temperature-dependent motor
product. protection. If the pump is blocked or otherwise overloaded, the built-
in thermal switch will cut out. When the motor has cooled
sufficiently, it will restart automatically.
6.1 Connecting products with a plug
No external motor protection is required.
WARNING
Electric shock 7. Starting up the product
Death or serious personal injury
‐ Make sure that the power plug delivered with the Do not turn on the power supply until the pump has been
product is in compliance with local regulations. filled with liquid.
‐ The plug must have the same protective earth (PE)
connection system as the power outlet. If not, use a
7.1 Priming the product
suitable adapter if allowed by local regulations.
1. Unscrew the priming plug and pour at least 1.7 litres (0.45
gallons) of water into the pump housing.
Do not turn on the power supply until the pump has been
filled with liquid. 2. Screw the priming plug on again.
Example:
1. Switch off the power supply to the power socket.
2. Connect the plug to the power socket.
Do not turn on the power supply until the pump has been
filled with liquid. If the suction depth exceeds 6 m (20 ft), it may be
necessary to prime the pump more than once.
If the product is delivered with a cable but without a plug, connect
the cable to the external main switch or attach a plug.
Connecting the cable to an external main switch
Always tighten priming and drain plugs by hand.
1. Strip the cable.
2. Thread each individual wire to the correct terminal in the
external main switch. 7.2 Starting up the pump
Wiring a plug After installing and priming, follow the following steps to start up the
1. Strip the cable. pump.
1. Prime the pump according to the priming instructions.
12
2. Open all isolating valves. 8. Control functions
English (GB)
3. Open the tapping point that is the highest or furthest away from
the pump to let out air trapped in the system. 8.1 Operating panel
7.3 Operation
7.3.1 Normal operation
When water is consumed in the water supply system, the pump
starts if the starting conditions of the pump are fulfilled. This
happens, for example, when a tap is opened, making the pressure
in the system drop.
The pump stops when the consumption stops, i.e. when the tap is
TM075407
closed.
7.3.1.1 Starting and stopping conditions
Starting conditions
The pump starts when at least one of the following conditions is Symbol Description
fulfilled:
• The flow is higher than Qmin (1.5 l/min).
Grundfos Eye: The indicator light shows the
• The pressure is lower than pstart. operating status of the product.
Stopping conditions
Start/Stop:Press the button to make the product ready
The pump stops with a time delay of 10 seconds when both of the
for operation or to start and stop the product.Start:If
following conditions are fulfilled:
you press the button when the product is stopped, the
• The flow is lower than Qmin (1.5 l/min). product starts if no other functions with higher priority
• The pressure is higher than pstart. have been enabled. Stop:If you press the button when
the product is running, the product always stops.
The pstart values are shown in Technical data.
Pump is stopped. The stop icon will light up on the
7.4 Shaft seal run-in display.
The shaft seal faces are lubricated by the pumped liquid. A slight
leakage from the shaft seal of up to 10 ml per day or 8 to 10 drops Bluetooth connect button enables communication with
per hour may occur. Under normal conditions, the leaking liquid will Grundfos GO Remote. Connection indicator light. It will
evaporate. As a result, no leakage will be detected. light up when the connection to Grundfos GO Remote
is established.
When the pump is started for the first time, or when the shaft seal
has been replaced, a certain run-in period is required before the
leakage is reduced to an acceptable level. The time required for this Reset the alarms.
depends on the operating conditions, that is, every time the
operating conditions change, a new run-in period will be started.
The following alarm lights indicate an issue with installation:
Leaking liquid will drain through the drain holes in the motor flange.
Install the product in such a way that leakage cannot cause
undesirable collateral damage. Leakage in the system.
13
8.2 Auto reset The factory setting is: ON
English (GB)
This function allows the pump to automatically check if the The auto reset function works as follows:
operating conditions are back to normal. If the operating conditions
are back to normal, the alarm indication will be reset automatically.
On
8.3.1 Dry-running during priming
The pump will stop after the specified period of continuous
If the unit does not detect pressure and flow within 5 minutes after it operation, and it will show the alarm Maximum runtime exceeded.
has been connected to a power supply, and the pump has started, This alarm will always need to be reset manually.
the dry-running alarm is activated. The factory setting for this function is OFF.
8.3.2 Dry-running during operation
If the unit does not detect pressure and flow within 40 seconds
during normal operation, the dry-running alarm is activated. Maximum runtime exceeded.
8.3.3 Resetting of dry-running alarm
If the dry-running alarm has been activated, the pump can be
restarted manually by pressing [Reset]. If the unit does not detect 9. Setting the product
pressure and flow within 40 seconds after restarting, the dry-
running alarm is reactivated. 9.1 Initial setup with Grundfos Go Remote
This protection is always ON.
9.1.1 Startup wizard on Grundfos GO Remote
The product is designed for Bluetooth communication with Grundfos
GO Remote.
Dry-running or water shortage. Once you have connected your product to Grundfos GO Remote, a
startup wizard appears. Follow the instructions to make your
settings.
8.4 Anti-cycling Grundfos GO Remote enables you to set functions and gives you
If there is a minor leakage in the system, or a tap has not been access to status overviews, technical product information and
closed entirely, the unit will start and stop the pump periodically. To current operating parameters.
avoid cycling, the anti-cycling function of the unit will stop the pump
9.1.2 Connecting to Grundfos GO Remote
and indicate an alarm. The anti-cycling function can be configurated
in Grundfos GO Remote. Before connecting the product to Grundfos GO Remote, the
Grundfos GO Remote app must be downloaded to your smartphone
Off or tablet. The app is free of charge and available for iOS and
If the pump starts 40 times in a fixed pattern, a LED icon will Android devices.
signalize cycling. The pump will remain in normal operation. 1. Open Grundfos GO Remote on your device. Make sure that
Bluetooth is enabled.
On
Your device must be within reach of the product to establish
If the pump starts and stops in a fixed pattern, there is a leakage in Bluetooth connection.
the system, and the pump will stop and show red Grundfos Eye and
LED icon indication. 2. Press the Bluetooth CONNECT button on Grundfos GO
The factory setting for this function is OFF. Remote.
3. Press the connect button on the operating panel. The blue LED
above the connect button is flashing until your device is
Leakage in the system. connected. Once the connection is established, the LED will be
permanently on.
Grundfos GO Remote is now loading the data for the product.
14
9.2.1 External input
English (GB)
2 1
This pump allows connecting external input as an additional
condition to the pump operation.
External input may be beneficial in the following situations:
• level switch in roof tank filling to stop the pump when the tank is
full
• inlet pressure switch to stop the pump in case of raised inlet
pressure
• moisture detection switch in irrigation applications to run the 3
pump only when the ground is dry.
4
External input must be 24 V digital input and can be connected
through the opening on the pump body. The cable length is limited
to 30 m.
TM075384
External input can only be set up with Grundfos GO
Remote.
WARNING
Electric shock
Death or serious personal injury Pos. Description
‐ Switch off the power supply before you start any work
1 Lid on PCB cover
on the product. Make sure that the power supply
cannot be switched on accidentally. 2 Terminals
3 Cable clip
WARNING
Electric shock 4 Cable gland
Death or serious personal injury
‐ The protective earth (PE) of the power outlet must be 1. Remove the screws and lift the pump cover.
connected to the protective earth of the pump. The
2. Open the lid on the PCB cover.
plug must have the same PE connection system as
the power outlet. 3. Pull the cable through the gland and the clip.
‐ 4. Connect to the terminals.
5. Fix the clip to hold cable in place.
All electrical connections must be carried out by qualified 6. Close the lid.
persons in accordance with local regulations.
7. Return the pump cover and screw it in place.
8. Power on the pump and connect with Grundfos GO Remote.
If the power cable is damaged, it must be replaced by the
manufacturer, the manufacturer's service partner or a
similarly qualified person.
15
9.2.1.2 Roof tank filling
English (GB)
Pos. Description
1 Float switch
2 External input (switch) cable
3 Pump
4 Water source (tank)
5 Roof tank
The pump will now run on demand, but only within the time period
set in the calendar function.
16
9.2.3.1 Selecting the performance mode 9.3 Resetting to factory settings
English (GB)
If the performance mode needs to be changed from the default To reset the pump to factory settings via the HMI:
setting, follow these steps:
1. Press and hold [Enable/Disable] and [Reset] buttons
1. Remove the pump cover. simultaneously for 5 seconds.
a. Unscrew and remove the priming plug from the pump.
b. Loosen and remove the inlet and outlet connections from the
pump. Enable/Disable button
c. Loosen and pull away the pump cover to remove it from the
pump.
Reset button
1 2
TM075488
TM075400
3. Using a size 10 hex key, turn the knob to the desired selection.
Pos. Description
1 Inlet and outlet manifolds
Air handing
2 Isolation valves
3 Twin base plate
Not pictured: communication
cable and fixing screws
The twin boosting system is beneficial when the water flow demand
TM075489
Duty/Standby
In Duty/Standby operation mode, only one pump will run at a time in
the twin system. This means that the maximum performance of the
system will be the same as the maximum performance of a single
SCALA1 unit. In case one pump fails to start, the other one will run.
The pumps will switch priority at the start based on the alternation
settings.
17
Duty/Assist
English (GB)
TM075388
Alternation can be set based on runtime or number of starts. This is
done through the Grundfos GO Remote application, either in the COMMUNICATION CABLE INPUT
initial setup or through the Settings tab on the Dashboard screen.
Connect communication cable
"No alternation" is only available for selection when
5. Connect the other end of the communication cable to the
operating in Duty/Assist.
second pump according to the instructions in steps 2 - 4.
6. Fasten both pumps to the base plate.
10.2 Setting SCALA1 twin booster system
7. Connect the inlet and outlet manifolds to both pumps.
WARNING
Electric shock 8. Prime both pumps according to the priming instructions.
Death or serious personal injury
‐ Switch off the power supply before you start any work
on the product. Make sure that the power supply
cannot be switched on accidentally.
WARNING
Electric shock
Death or serious personal injury
‐ The protective earth (PE) of the power outlet must be
connected to the protective earth of the pump. The
plug must have the same PE connection system as
the power outlet.
‐
TM075386
All electrical connections must be carried out by qualified
persons in accordance with local regulations. Fasten pumps to base plate and connect inlet and outlet manifolds
9. Follow the startup instructions.
If the power cable is damaged, it must be replaced by the
manufacturer, the manufacturer's service partner or a 10. Connect to Grundfos GO Remote and follow the initial setup
similarly qualified person. screen.
11. Press the connect button on the operating panel of one of the
Make sure that the electrical installation supports the rated pumps to establish the connection between the twin pumps
current [A] of the product. See the nameplate of the
product. 12. Follow the instructions in Grundfos GO Remote for setting up
the twin booster system.
Twin base plate, manifolds and communication cable are available
in the SCALA twin accessory set. 10.2.1 Setting SCALA1 twin booster with Grundfos GO Remote
To enable the twin operation of two SCALA1 pumps, follow the Setting the twin booster with Grundfos GO Remote can be done in
steps below. two ways:
1. Position both pumps on the twin base plate without fastening • initial setup: run on first connection, or through the assist tab in
them. the Dashboard
• settings tab in the Dashboard.
2. Open the cover of both pumps by removing the screws.
3. Punch open the vacant hole/slot on the side of the pump body
and pull one end of the communication cable through the hole. Choose the correct parameters for:
• operation mode
• alternation type
• alteration value.
Examples:
• If the SCALA1 booster system is set up as Duty/Standby with
alternation on the number of starts = 1, this means that every
TM075385
18
English (GB)
Range and default values for alternation
Resolutio
Minimum Default Maximum
n
Alternation of starts
1 1 100 1
and stops
Alternation runtime
0.5 5 100 0.5
[h]
11. Service
WARNING
TM075337
Electric shock
Death or serious personal injury
‐ Switch off the power supply before you start any work
on the product. Make sure that the power supply
cannot be switched on accidentally. Cleaning the condensation plugs
WARNING
11.1.2 Cleaning of the integrated non-return valve
Chemical hazard
Death or serious personal injury 1. Turn off the power supply and disconnect the power plug.
‐ Make sure that the product has only been used for 2. Shut off the water source.
water. If the product has been used for pumping
aggressive liquids, flush the system with clean water 3. Open the tap to release the pressure in the pipe system.
before you start work on the product.
4. Close the isolating valves and/or drain the pipes.
WARNING 5. Gradually open and remove the priming plug. The plug and non-
Biological hazard return valve are one unit.
Death or serious personal injury
‐ Make sure that the product has only been used for 6. Clean the integrated non-return valve with warm water and a
water. If the product has been used for pumping soft brush.
aggressive liquids, flush the system with clean water 7. Assemble the components in reverse order.
before you start work on the product.
Example:
WARNING
Pressurised system
Death or serious personal injury
‐ Before dismantling the pump, drain the system or
close the isolating valves on both sides of the pump.
Slowly loosen the drain plug and unpressurise the
system.
CAUTION
Impurities in the water
Minor or moderate personal injury
‐ Before the pump is used for supplying drinking water,
flush the pump thoroughly with clean water.
‐ Use spare parts approved by Grundfos.
TM075336
Only qualified persons are allowed to service the pump.
19
English (GB)
WARNING
Electric shock
Death or serious personal injury
‐ Check that the product is intact and not cracked.
Especially if the product was not drained before
standstill or was exposed to frost.
CAUTION
Impurities in the water
Minor or moderate personal injury
‐ Before the pump is used for supplying drinking water,
flush the pump thoroughly with clean water.
TM075258
If the product has been standing still for a period of time, for
example, during winter, follow these instructions before startup.
1. Check that the product is intact and not cracked. Especially if
the product was not drained before standstill or has been
exposed to frost. Deblocking the pump
Example:
TM075356
14. Storage
20
15.1 Grundfos Eye SCALA1
English (GB)
Drain the product before storage. Grundfos Eye indicates the operating conditions of the motor on the
motor operating panel.
CAUTION
Hot or cold liquid
TM054846
Minor or moderate personal injury
‐ Make sure that escaping hot or cold liquid does not
cause injury to persons or damage to the equipment.
21
15.2 The pump does not start
English (GB)
Automatic
Grundfos Eye Indicator light Cause Remedy
reset
The fuses in the electrical installation have Replace the fuses. If the new fuses blow as
- -
blown. well, check the electrical installation.
The difference between SCALA1 unit and Adjust the installation or select a SCALA1
- -
the tapping point is too large. unit with a higher head.
Automatic
Grundfos Eye Indicator light Cause Remedy
reset
Switch on the power supply. Check the cables
and cable connections for defects and loose
- - Power supply failure.
connections. Check for blown fuses in the
electrical installation.
Dry-running or water shortage. Check the water source, and prime the pump.
Impurities are blocking the inlet pipe. Clean the inlet pipe.
The foot or non-return valve is blocked in a Clean, repair or replace the foot or non-return
Yes closed position. valve.
Leakage in the inlet pipe. Repair the inlet pipe.
Prime the inlet pipe and the pump. Check the
Air in the inlet pipe or the pump.
inlet conditions of the pump.
22
15.4 The pump is running
English (GB)
Cause Remedy
Automatic
Grundfos Eye Indicator light Cause Remedy
reset
The non-return valve is not properly closed,
or the pipe system is leaking. This happens Check and repair the pipe system, or clean,
No
when cycling alarm and/or leakage alarm repair or replace the non-return valve.
are disabled.
Overheating caused by
– high ambient temperature 55 °C
- - Contact your pump supplier.
– overloaded motor
– seized-up motor or pump.
23
15.7 The pump starts and stops too frequently
English (GB)
Cause Remedy
A tap has not been closed entirely after Check that all taps have been closed. See
- -
use. section Anti-cycling.
- - Two different models of SCALA1 connected. Connect the same size models.
Check the system and each pump using the fault finding above.
- - Communication failure.
Check or replace the twin communication cable.
Cause Remedy 1. Eliminate the fault cause and reset the pump manually by
pressing the [Reset] button.
24
English (GB)
If the fault disappears by itself, the pump will attempt to
reset automatically, and the fault indication will disappear.
The fault indication will still be visible in the Grundfos GO
Remote alarm log.
25
16. Technical data
English (GB)
SCALA1
3-25 3-35 3-45 5-25 5-55
55 °C 55 °C 55 °C 55 °C 55 °C
Max. ambient temperature
(131 °F) (131 °F) (131 °F) (131 °F) (131 °F)
45 °C 45 °C 45 °C 45 °C 45 °C
Max. liquid temperature
(113 °F) (113 °F) (113 °F) (113 °F) (113 °F)
Maximum system pressure [bar (psi)] 8 (116) 8 (116) 8 (116) 8 (116) 8 (116)
Maximum inlet pressure [bar (psi)] 5 (72.5) 4 (58) 3 (43.5) 5 (72.5) 2 (29)
Max. head [m (ft)] 50 Hz 25 (82) 36 (118.1) 44 (144.3) 26 (85.3) 52 (170.6)
Max. head [m (ft)] 60 Hz 25 (82) 35 (114.8) 51 (167.3) 27 (85.3) 53 (173.8)
Nominal head [m (ft)] 15 (49.2) 20 (65.6) 25 (82) 15 (49.2) 25 (82)
Nominal flow [m3/h (gpm)] 3.00 (12.19) 3.72 (16.38) 3.59 (15.80) 4.80 (21.12) 5.33 (23.48)
IP Rating X4D X4D X4D X4D X4D
Pumped liquid Clean water Clean water Clean water Clean water Clean water
Noise level [db(A)] < 55 < 55 < 55 < 55 < 55
Frequency of starts and stops 25 per hour 25 per hour 25 per hour 25 per hour 25 per hour
Start pressure (pstart) [bar (psi)] 1.2 (17.4) 1.5 (21.8) 2.2 (31.9) 1.2 (17.4) 2.8 (40.6)
26
16.3 Electrical data
English (GB)
All variants have insulation class F.
50 Hz
60 Hz
H1 H2 H3 L1 B1 TM075267
Weight
SCALA1 3-25 SCALA1 3-35 SCALA1 3-45 SCALA1 5-25 SCALA1 5-25
[kg] [kg] [kg] [kg] [kg]
[lb] [lb] [lb] [lb] [lb]
11 12 12 12 14
24.2 26.4 26.4 26.4 30.8
27
16.5 Air handling mode performance curves
English (GB)
H H H H
[ft] [m] [ft] [m]
SCALA1 3-25 40
SCALA1 3-35
28
120
35
80 24
100 30
20
60 25
80
16
20
60
40 12
Airhandling 15
40
8 Airhandling
10
20
4 20
5
0 0 0 0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 Q [m³/h] 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 Q [m³/h]
TM075233
TM075234
0.2 200
100 0.2
0.0 0 0.0 0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 Q [m³/h] 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 4.8 5.2 Q [m³/h]
H H H H
[ft] [m] [ft] [m]
45 SCALA1 3-45 SCALA1 5-25
28
140
40
80 24
120
35
100 20
30
60
80 25 16
20
60 40 12
15
40 8
10 20
Airhandling
20 4
5
Airhandling
0 0 0 0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Q [m³/h] 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Q [m³/h]
TM075236
TM075235
0.4
200 200
0.2 0.2
0.0 0 0.0 0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Q [m³/h] 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Q [m³/h]
H H
[ft] [m]
180 55 SCALA1 5-55
50
160
45
140
40
120
35
100 30
80 25
20
60
15
40
10
Airhandling
20 5
0 0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 Q [m³/h]
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [US GPM]
P1 P1
[hp] [W]
1400
1.8
Airhandling
1.6 1200
1.4 1000
1.2
800
1.0
0.8 600
TM075237
0.6 400
0.4
200
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 Q [m³/h]
28
17. Approvals
English (GB)
CDMA850/LTE B5 +0.3 dBi (824-849 MHz)
CDMA1900/LTE B2 -1.2 dBi (1850-1910 MHz)
17.1 Bluetooth technology information
LTE B4 +1.5 dBi (1710-1755 MHz)
Frequency of operation 2400 – 2483.5 MHz (ISM band) LTE B17 -7.0 dBi (704-716 MHz)
Modulation Type GFSK LTE B12 -7.0 dBi (698-716 MHz)
Data Rate 1 Mbps LTE B13 -5.0 dBi (777-787 MHz)
5 dBm EIRP with internal
Transmit power Bluetooth information
antenna
Frequency of operation 2400 - 2483.5 MHz (ISM band)
For Brazil only: This pump has a BLE ANT board equipped with
Modulation type GFSK
Bluetooth technology with these specifications.
Data rate 1 Mbps
17.2 FCC/ISED general requirements
FCC ID: OG3-SCALA
5 dBm EIRP with internal
IC: 10447A-SCALA Transmit power
antenna
0
0
0
0 0
TM075015
This device complies with FCC and ISED radiation exposure limits
set forth for an uncontrolled environment. This device must be
installed and operated with a minimum distance of 20 cm (7.87
inches) between the radiator and your body. This transmitter must
not be co-located or operated in conjunction with any other antenna
or transmitter.
FCC
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
ISED
This device complies with ISED’s license-exempt RSSs.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
29
18. Disposing of the product
English (GB)
30
Argentina Estonia Lithuania South Africa
Grundfos companies
Bombas GRUNDFOS de Argentina S.A. GRUNDFOS Pumps Eesti OÜ GRUNDFOS Pumps UAB GRUNDFOS (PTY) LTD
Ruta Panamericana km. 37.500industin Peterburi tee 92G Smolensko g. 6 16 Lascelles Drive, Meadowbrook Estate
1619 - Garín Pcia. de B.A. 11415 Tallinn LT-03201 Vilnius 1609 Germiston, Johannesburg
Tel.: +54-3327 414 444 Tel.: + 372 606 1690 Tel.: + 370 52 395 430 Tel.: (+27) 10 248 6000
Fax: +54-3327 45 3190 Fax: + 372 606 1691 Fax: + 370 52 395 431 Fax: (+27) 10 248 6002
E-mail: lgradidge@grundfos.com
Australia Finland Malaysia
GRUNDFOS Pumps Pty. Ltd. OY GRUNDFOS Pumput AB GRUNDFOS Pumps Sdn. Bhd. Spain
P.O. Box 2040 Trukkikuja 1 7 Jalan Peguam U1/25 Bombas GRUNDFOS España S.A.
Regency Park FI-01360 Vantaa Glenmarie industrial Park Camino de la Fuentecilla, s/n
South Australia 5942 Tel.: +358-(0) 207 889 500 40150 Shah Alam, Selangor E-28110 Algete (Madrid)
Tel.: +61-8-8461-4611 Tel.: +60-3-5569 2922 Tel.: +34-91-848 8800
Fax: +61-8-8340-0155 France Fax: +60-3-5569 2866 Fax: +34-91-628 0465
Pompes GRUNDFOS Distribution S.A.
Austria Parc d’Activités de Chesnes Mexico Sweden
GRUNDFOS Pumpen Vertrieb Ges.m.b.H. 57, rue de Malacombe Bombas GRUNDFOS de México GRUNDFOS AB
Grundfosstraße 2 F-38290 St. Quentin Fallavier (Lyon) S.A. de C.V. Box 333 (Lunnagårdsgatan 6)
A-5082 Grödig/Salzburg Tel.: +33-4 74 82 15 15 Boulevard TLC No. 15 431 24 Mölndal
Tel.: +43-6246-883-0 Fax: +33-4 74 94 10 51 Parque industrial Stiva Aeropuerto Tel.: +46 31 332 23 000
Fax: +43-6246-883-30 Apodaca, N.L. 66600 Fax: +46 31 331 94 60
Germany Tel.: +52-81-8144 4000
Belgium GRUNDFOS GMBH Fax: +52-81-8144 4010 Switzerland
N.V. GRUNDFOS Bellux S.A. Schlüterstr. 33 GRUNDFOS Pumpen AG
Boomsesteenweg 81-83 40699 Erkrath Netherlands Bruggacherstrasse 10
B-2630 Aartselaar Tel.: +49-(0) 211 929 69-0 GRUNDFOS Netherlands CH-8117 Fällanden/ZH
Tel.: +32-3-870 7300 Fax: +49-(0) 211 929 69-3799 Veluwezoom 35 Tel.: +41-44-806 8111
Fax: +32-3-870 7301 E-mail: infoservice@grundfos.de 1326 AE Almere Fax: +41-44-806 8115
Service in Deutschland: Postbus 22015
Belarus kundendienst@grundfos.de 1302 CA ALMERE Taiwan
Представительство ГРУНДФОС в Минске Tel.: +31-88-478 6336 GRUNDFOS Pumps (Taiwan) Ltd.
220125, Минск Greece Fax: +31-88-478 6332 7 Floor, 219 Min-Chuan Road
ул. Шафарнянская, 11, оф. 56, БЦ «Порт» GRUNDFOS Hellas A.E.B.E. E-mail: info_gnl@grundfos.com Taichung, Taiwan, R.O.C.
Тел.: +375 17 397 397 3 20th km. Athinon-Markopoulou Av. Tel.: +886-4-2305 0868
+375 17 397 397 4 P.O. Box 71 New Zealand Fax: +886-4-2305 0878
Факс: +375 17 397 397 1 GR-19002 Peania GRUNDFOS Pumps NZ Ltd.
E-mail: minsk@grundfos.com Tel.: +0030-210-66 83 400 17 Beatrice Tinsley Crescent Thailand
Fax: +0030-210-66 46 273 North Harbour Industrial Estate GRUNDFOS (Thailand) Ltd.
Bosnia and Herzegovina Albany, Auckland 92 Chaloem Phrakiat Rama 9 Road
GRUNDFOS Sarajevo Hong Kong Tel.: +64-9-415 3240 Dokmai, Pravej, Bangkok 10250
Zmaja od Bosne 7-7A GRUNDFOS Pumps (Hong Kong) Ltd. Fax: +64-9-415 3250 Tel.: +66-2-725 8999
BiH-71000 Sarajevo Unit 1, Ground floor, Siu Wai industrial Fax: +66-2-725 8998
Tel.: +387 33 592 480 Centre Norway
Fax: +387 33 590 465 29-33 Wing Hong Street & 68 King Lam GRUNDFOS Pumper A/S Turkey
www.ba.grundfos.com Street, Cheung Sha Wan Strømsveien 344 GRUNDFOS POMPA San. ve Tic. Ltd. Sti.
E-mail: grundfos@bih.net.ba Kowloon Postboks 235, Leirdal Gebze Organize Sanayi Bölgesi
Tel.: +852-27861706 / 27861741 N-1011 Oslo Ihsan dede Caddesi
Brazil Fax: +852-27858664 Tel.: +47-22 90 47 00 2. yol 200. Sokak No. 204
BOMBAS GRUNDFOS DO BRASIL Fax: +47-22 32 21 50 41490 Gebze/ Kocaeli
Av. Humberto de Alencar Castelo Branco, Hungary Tel.: +90 - 262-679 7979
630 GRUNDFOS Hungária Kft. Poland Fax: +90 - 262-679 7905
CEP 09850 - 300 Tópark u. 8 GRUNDFOS Pompy Sp. z o.o. E-mail: satis@grundfos.com
São Bernardo do Campo - SP H-2045 Törökbálint ul. Klonowa 23
Tel.: +55-11 4393 5533 Tel.: +36-23 511 110 Baranowo k. Poznania Ukraine
Fax: +55-11 4343 5015 Fax: +36-23 511 111 PL-62-081 Przeźmierowo Бізнес Центр Європа
Tel.: (+48-61) 650 13 00 Столичне шосе, 103
Bulgaria India Fax: (+48-61) 650 13 50 м. Київ, 03131, Україна
Grundfos Bulgaria EOOD GRUNDFOS Pumps india Private Limited Tel.: (+38 044) 237 04 00
Slatina District 118 Old Mahabalipuram Road Portugal Fax: (+38 044) 237 04 01
Iztochna Tangenta street no. 100 Thoraipakkam Bombas GRUNDFOS Portugal, S.A. E-mail: ukraine@grundfos.com
BG - 1592 Sofia Chennai 600 097 Rua Calvet de Magalhães, 241
Tel.: +359 2 49 22 200 Tel.: +91-44 2496 6800 Apartado 1079 United Arab Emirates
Fax: +359 2 49 22 201 P-2770-153 Paço de Arcos GRUNDFOS Gulf Distribution
E-mail: bulgaria@grundfos.bg Indonesia Tel.: +351-21-440 76 00 P.O. Box 16768
PT GRUNDFOS Pompa Fax: +351-21-440 76 90 Jebel Ali Free Zone, Dubai
Canada Graha intirub Lt. 2 & 3 Tel.: +971 4 8815 166
GRUNDFOS Canada inc. Jln. Cililitan Besar No.454. Makasar, Romania Fax: +971 4 8815 136
2941 Brighton Road Jakarta Timur GRUNDFOS Pompe România SRL
Oakville, Ontario ID-Jakarta 13650 S-PARK BUSINESS CENTER, Clădirea United Kingdom
L6H 6C9 Tel.: +62 21-469-51900 A2, etaj 2 GRUNDFOS Pumps Ltd.
Tel.: +1-905 829 9533 Fax: +62 21-460 6910 / 460 6901 Str. Tipografilor, Nr. 11-15, Sector 1, Cod Grovebury Road
Fax: +1-905 829 9512 013714 Leighton Buzzard/Beds. LU7 4TL
Ireland Bucuresti, Romania Tel.: +44-1525-850000
China GRUNDFOS (Ireland) Ltd. Tel.: 004 021 2004 100 Fax: +44-1525-850011
GRUNDFOS Pumps (Shanghai) Co. Ltd. Unit A, Merrywell Business Park E-mail: romania@grundfos.ro
10F The Hub, No. 33 Suhong Road Ballymount Road Lower U.S.A.
Minhang District Dublin 12 Russia GRUNDFOS Water Utility Head Quarters
Shanghai 201106 PRC Tel.: +353-1-4089 800 ООО Грундфос Россия Brookshire, Texas 77423 USA
Tel.: +86 21 612 252 22 Fax: +353-1-4089 830 ул. Школьная, 39-41
Uzbekistan
Fax: +86 21 612 253 33 Москва, RU-109544, Russia
Italy Grundfos Tashkent, Uzbekistan
Тел. (+7) 495 564-88-00 (495) 737-30-00
Columbia GRUNDFOS Pompe Italia S.r.l. The Representative Office of Grundfos
Факс (+7) 495 564 8811
GRUNDFOS Colombia S.A.S. Via Gran Sasso 4 Kazakhstan in Uzbekistan
E-mail grundfos.moscow@grundfos.com
Km 1.5 vía Siberia-Cota Conj. Potrero I-20060 Truccazzano (Milano) 38a, Oybek street, Tashkent
Chico, Tel.: +39-02-95838112 Serbia Tel.: (+998) 71 150 3290 / 71 150 3291
Parque Empresarial Arcos de Cota Bod. 1A. Fax: +39-02-95309290 / 95838461 Grundfos Srbija d.o.o. Fax: (+998) 71 150 3292
Cota, Cundinamarca Omladinskih brigada 90b
Japan Revision Info
Tel.: +57(1)-2913444 11070 Novi Beograd
GRUNDFOS Pumps K.K. Last revised on 09-09-2020
Fax: +57(1)-8764586 Tel.: +381 11 2258 740
1-2-3, Shin-Miyakoda, Kita-ku Fax: +381 11 2281 769
Croatia Hamamatsu www.rs.grundfos.com
GRUNDFOS CROATIA d.o.o. 431-2103 Japan
Buzinski prilaz 38, Buzin Tel.: +81 53 428 4760 Singapore
HR-10010 Zagreb Fax: +81 53 428 5005 GRUNDFOS (Singapore) Pte. Ltd.
Tel.: +385 1 6595 400 25 Jalan Tukang
Fax: +385 1 6595 499 Korea Singapore 619264
www.hr.grundfos.com GRUNDFOS Pumps Korea Ltd. Tel.: +65-6681 9688
6th Floor, Aju Building 679-5 Faxax: +65-6681 9689
Czech Republic Yeoksam-dong, Kangnam-ku, 135-916
GRUNDFOS Sales Czechia and Slovakia Seoul, Korea Slovakia
s.r.o. Tel.: +82-2-5317 600 GRUNDFOS s.r.o.
Čajkovského 21 Fax: +82-2-5633 725 Prievozská 4D 821 09 BRATISLAVA
779 00 Olomouc Tel.: +421 2 5020 1426
Tel.: +420-585-716 111 Latvia sk.grundfos.com
SIA GRUNDFOS Pumps Latvia
Denmark Deglava biznesa centrs Slovenia
GRUNDFOS DK A/S Augusta Deglava ielā 60 GRUNDFOS LJUBLJANA, d.o.o.
Martin Bachs Vej 3 LV-1035, Rīga, Leskoškova 9e, 1122 Ljubljana
DK-8850 Bjerringbro Tel.: + 371 714 9640, 7 149 641 Tel.: +386 (0) 1 568 06 10
Tel.: +45-87 50 50 50 Fax: + 371 914 9646 Fax: +386 (0)1 568 06 19
Fax: +45-87 50 51 51 E-mail: tehnika-si@grundfos.com
E-mail: info_GDK@grundfos.com
www.grundfos.com/DK
99735528
ECM: 1312602
04.2021
Trademarks displayed in this material, including but not limited to Grundfos, the Grundfos logo and “be think innovate” are registered trademarks owned by The Grundfos Group. All rights reserved. © 2021 Grundfos Holding A/S, all rights reserved.
GRUNDFOS INSTRUCTIONS
SCALA1
http://qr.grundfos.com/i/99735528
1
PN8:
Max. 8 bar/ 0.8 MPa
SCALA1 3-25 10 m / 32 ft
SCALA1 3-35 15 m / 49 ft
• Voltage and
SCALA1 3-45 20 m / 65 ft
frequency
SCALA1 5-25 10 m / 32 ft
• Ambient SCALA1 5-55 25 m / 82 ft
temperature
3-25 Max. 5 bar / 72.5 PSI / 0.5 MPa
3-35 Max. 4 bar / 58 PSI / 0.4 MPa
3-45 Max. 3 bar / 43.5 PSI / 0.3 MPa
5-25 Max. 5 bar / 72.5 PSI / 0.5 MPa
5-55 Max. 2 bar / 29 PSI / 0.2 MPa
Min./Max.
0 °C - + 45 °C/
32 °F - + 113 °F Max. 8 m / 26 ft
2 3
1 2
163 mm/
6.4 inch
135 mm/
5.3 inch
174 mm/
6.9 inch
4x
4 5
3 4
4x
4x
6 7
5 5A
5B
5C
8 9
6 7
10 11
8 9
1/On
SCALA1 SCALA1
Stop Stop
0/Off
12 13
14 15
SCALA1 SCALA1
Stop
/On
Stop
/Off
+24 V
EXT
http://qr.grundfos.com/i/99735528
16 17
SCALA1 SCALA1
Stop Stop
Off
On
(default)
On
18 19
SCALA1
Stop
Off
(default)
On
http://qr.grundfos.com/i/99735528
20 21
PN: 99725165 Rp
PN: 99725168 NPT
product-
selection
grundfos .
.com
http://qr.grundfos.com/i/99735528
22 23
Tel: +45 87 50 14 00
www.grundfos.com
ECM: 1280823
DK-8850 Bjerringbro
Poul Due Jensens Vej 7
GRUNDFOS Holding A/S
99735558 0220
Trademarks displayed in this material, including but not limited to Grundfos, the Grundfos logo and
“be think innovate” are registered trademarks owned by The Grundfos Group. All rights reserved.