Professional Documents
Culture Documents
Toshiba TD-E652
Toshiba TD-E652
1
Content Index
ABBREVIATIONS & ACRONYMS ....................................................................................................................... 3
INTRODUCTION .................................................................................................................................................. 5
SPECIFICATION ................................................................................................................................................... 50
PROCUCT SPECIFICATION.......................................................................................................... 50
PACKING ..................................................................................................................................... 70
DISASSEMBLY / ASSEMBLY ........................................................................................................... 71
2
Abbreviations & Acronyms
A
A/D Converter Analog to Digital Converter
B
C
CEL LABEL China Energy Label
D
DTV Digital Television
E
EMI Electromagnetic Interference
F
G
H
HDMI High Definition Multimedia Interface
I
J
K
L
M
N
NTSC National Television System Committee
O
OSD On Screen Display
P
PAL Phase Alternating Line
Q
R
RS232 Interface Between Data Terminal Equipment and Data
Communications Equipment Employing Serial Binary
Data Interchange
S
T
U
V
3
About This Manual
This manual contains information about maintenance and service of TOSHIBA products. Use this
manual to perform diagnostics tests, trouble shoot problems, and align the TOSHIBA product.
Important
Only trained service personnel who are familiar with this TOSHIBA Product shall
perform service or maintenance to it. Before performing any maintenance or service,
the engineer MUST read the “Important Safety Information”.
Trademark
The following terms are trademarks of TOSHIBA Corporation:
Other companies, products, or service names may be the trademarks of their respective
companies.
4
Introduction
This section contains general service information, please read through carefully. It should be stored for
easy access place.
Safety Notice
1. Make sure your working environment is dry and clean, and meets all government safety
requirements.
2. Ensure that other persons are safe while you are servicing the product.
3. DO NOT perform any action that may cause a hazard to the customer or make the product
unsafe.
4. Use proper safety devices to ensure your personal safety.
5. Always use approved tools and test equipment for servicing.
6. Never assume the product’s power is disconnected from the mains power supply. Check that it is
disconnected before opening the product’s cabinet.
7. Modules containing electrical components are sensitive to electrostatic discharge (ESD). Follow
ESD safety procedures while handling these parts.
8. Some products contain more than one battery. Do not disassemble any battery, or expose it to high
temperatures such as throwing into fire, otherwise it may explode.
9. Refer to government requirements for battery recycling or disposal.
Compliance Statement
1. Caution: This Optical Storage Product contains a Laser device. Refer to the product specifications
and your local Laser Safety Compliance Requirements.
5
Related Service Information
1. Application Range
1.1. This specification sheet is applied to all of the Public Information Display with ODM by Darwin
Precisions.
1.2. Not-included specification and each product spec in this spec sheet apply correspondingly to
the following each country standard and requirement of Buyer
Model Name Customer Market place Panel Chassis Remark
USA
TOSHIBA LIFESTYLE
Japan
S645HF44 V0 PRODUCTS AND SERVICES T650HVN12.2 MSD8220 Mstar
Europe
COPORATION
Australia
2. Features
True Commercial 16/7 Operation Digital Display ( Life time is 30,000 hour / One week using 7
day, one day using 16 hr, life time is 5 year)
LCD panel providing a wide variety of content and messages clearly
Brightness 450 nits( Typ)
Built-in Speakers
USB Media Player -Video:MPG, MPEG, AVI, MKV, MOV, MP4, TS, M2TS, H.264 (up to level
4.0)\Music: MP3, WMA, AAC\Photo:JPG, BMP, PNG (BMPs and JPGs with a resolution larger
than 1024x768 may take additional time to display)
3. General Description
3.1. General Specification
No Item Specification Unit Note
1 Active Screen Size 64.5 inch
11 Weight 24,000 g
6
3.2. Electrical Specifications
Item Specification Unit Remark
Resolution 1,920 x 1,080
LCD panel Response time(typ.) 8 ms
Aspect Ratio 16:9
Panel Brightness(Typ) 450 cd/m2
Optical Panel Contrast Ratio(Typ) 3,000
Panel Contrast Ratio(Min) 2,400
Separate Sync LVDS
Horizontal Sync Positive/Negative
7
2. Component specRTC IC tolerance
8
3.4. Power board specification
3.4.1 General specification
No Item Min Typ Max Unit Remark
1 AC Power Voltage 100 - 240 V Note 1
2 Max. Input Current (S500HF44V0) 2.5 Arms Based on AC 100V
3 Standby Power - - 0.5 W
Note 1: Follow Spec Label is 100V~240V
Follow Power board Spec is 90V~264V
4. Optical Specification
Each part is tested as below without special appointment
4.1 Temperature:
-Operating 0℃ ~ 40℃
-Non-operating -20℃ to +60℃
4.2 Relative Humidity:
-Operating 10 to 90%
-Non-operating ≦ 90%
4.3 Power Voltage: Standard input voltage (AC100V~ 240V 50/60Hz)
* Standard Voltage of each product is marked by models
4.4 Specification and performance of each parts are followed each drawing and specification by part
number in accordance with BOM.
9
4.5 The receiver must be operated for about 20 minutes prior to the adjustment.
4.6 General Information
Item Specification Unit Note
Active Screen Size 64.5 inch
Weight 24,000 g
10
Fig.1 presents additional information concerning the measurement equipment and method.
Values
Parameter Symbol Unit Notes
Min. Typ. Max
Contrast Ratio CR 2,400 3,000 -- -- 1
Surface Luminance (White) LWH 400 450 -- cd/m2 2
Luminance Variation δWHITE(9P) 68% -- -- -- 3
Response Time (G to G) Ty -- 8 -- ms 4
Color Gamut NTSC 72 % --
Color Coordinates
Rx 0.652
Red
Ry 0.329
Gx 0.314
Green
Gy 0.612
Typ. -0.03 Typ. +0.03
Bx 0.150
Blue
By 0.049
Wx 0.271 --
White
Wy 0.273 --
x axis, right (φ=0°) θr -- 89 -- Degree 5
Viewing x axis, left (φ=180°) θi -- 89 -- Degree 5
Angle y axis, up (φ=90°) θu -- 89 -- Degree 5
y axis, down (φ=270°) θd -- 89 -- degree 5
Note:
1. Contrast Ratio (CR) is defined mathematically as:
2. Surface luminance is luminance value at point 5 across the LCD surface 50cm from the surface with all pixels displaying
white. From more information see FIG 2. LWH=Lon5 where Lon5 is the luminance with all pixels displaying white at center
5 location.
3. The variation in surface luminance, _WHITE is defined (center of Screen) as:
δHITE(9P)= Minimum(Lon1, Lon2,…,Lon9)/ Maximum(Lon1, Lon2,…Lon9)
11
4. Response time Tr is the average time required for display transition by switching the input signal for five luminance ratio
(0%,25%,50%,75%,100% brightness matrix) and is based on Fv=60Hz to optimize.
The response time is defined as the following figure and shall be measured by switching the input signal for “any level of grey
(bright) “and “any level of gray (dark)”.
Any level of gray (Bright) Any level of gray (Dark) Any level of gray (Bright)
FIG. 2 Luminance
5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the horizontal or x
axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see
FIG3.
FIG.3 Viewing Angle
12
5. OSD functions
Default Value
Layer 1 Layer 2 Layer 3 Layer 4
AV Component Hdmi1 Hdmi2 DVI VGA USB
Standard/Dynami
Picture Style
c/sRGB/Custom/ Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic
画像スタイル
Cinema
Contrast 0~100
73 73 73 73 73 73 73
コントラスト 0~100
Brightness 0~100
50 50 50 50 50 50 50
ブライトネス 0~100
Sharpness 0~10
6 6 6 6 6 6 6
シャープネス 0~10
Tint 0~50
26 26 26 26 26 26 26
色合い 0~50
Magenta
0~15 0 0 0 0 0 0 0
Saturation
Blue
Color 0~15 0 0 0 0 0 0 0
Saturation
カラー
Cyan
0~15 0 0 0 0 0 0 0
Saturation
Green
0~15 0 0 0 0 0 0 0
Saturation
Yellow
0~15 0 0 0 0 0 0 0
Saturation
Backlight
0~100
バックラ 100 100 100 100 100 100 100
0~100
イト
13
5000K~10000K,
13000K/100K step,
Color
Custom
Temperature 13000K 13000K 13000K 13000K 13000K 13000K 13000K
5000K~10000K/10
色温度
0K step,パーソナ
Color Temperature ル
Green Gain
0~2047 13000K default RGB = (988, 1060, 1115)
G ゲイン
Blue Gain
0~2047
B ゲイン
14
4:3 , 16:9 and dot by dot.
0~255/16~235
Color
/Automatic
Range Auto Auto Auto
0~255/16~235
色範囲
/自動
H position
0~100 50
水平位置
V position 36
0~68
垂直位置
Clock 50
0~100 Gray
クロック Gray out
VGA setting out
Phase
VGA 設定 0~100 60
位相
Enable/Disable
Auto Adjustment
有効にする/無 Enable
自動調整
効にする
Auto
None
自動
Standard/Dynamic/
イル イナミック/パー
ソナル
Sound Sound Mode
Treble
音声 音声モード 50~+50 10 10 10 10 10 10 10
高音
Bass
50~+50 30 30 30 30 30 30 30
低音
Balance
50~+50 0 0 0 0 0 0 0
バランス
15
Surround
Sound
On/Off
サラウン OFF OFF OFF OFF OFF OFF OFF
オン/オフ
ドサウン
Speaker
Internal/External
スピーカ Internal Internal Internal Internal Internal Internal Internal
内部/外部
ー
Audio
Line In/HDMI 1
Source Line in Line in HDMI 1 HDMI 2 Line in Line in USB
Line In/HDMI 1
音源
schedule
USB-movie
Setup
5. schedule behavior
設定
Case 1: if the power on time is same in different schedule,
highest)
Signal Check Priority 2. If current source signal is lost, start failover function
16
3. If user change source by input source OSD or
seconds.
USB-movie
USB-movie)
17
OFF
(Off means uart communication is changed to VGA
Control port.(RD debug)
Off/ RS232/ LAN
Setting RS232 means uart communication is changed to
オフ/RS232/LAN
制御設定 RS232C port.
port.)
ECO
(Set the standby mode of LAN IC.
Standby ECO means LAN IC is not workable when PID is at
Mode ECO/Normal standby mode. User cannot use LAN command to
スタンバ 省エネ/ノーマル power on PID.
イモード Normal means LAN IC is active mode when PID is
power on PID)
Power
Off, 300sec
Save
30sec~300sec/30sec (Set the timer to power off PID when current source has no
パワーセ
steps signal.)
ーブ
None
Initial Landscape
OSD Rotation Landscape/Portrait
Setting (Set the OSD in landscape or portrait mode.
OSD 回転 水平/垂直
初期設定 The portrait OSD will turn landscape OSD right 90 degree)
18
English/
French/German/Spanish/Ital
Menu ian/Swedish/Japanese/CN_
Language Chinese
English
メニュー言 英語/フランス語/ドイツ
語 語/スペイン後/イタリア
語/スウェーデン語/日本
語/簡体中文
Month 1~12 1
Clock 2015/2/25 04:14 PM
Day 1~31 1
時計 2015/2/25 04:14 PM
Hour 0~23 4
Minute 0~59 0
Enable
Menu+Left+Right+Up+Down to unlock.)
Enable
Menu+Left+Right+Up+Down to unlock.)
OFF
Anti-Image
(Off: No image retention behavior.
Retention Off/white pixel/picture shift
White pixel: Show/hide 4x4 pixel per 1.2 second.
焼き付き防 有効にする/無効にする
Picture Shift: Shift 2 pixel per 1 min. The shift behavior is
止
"left -> up-> right -> down -> center".)
Tiling Enable/Disable
Multi Gray Gray Disable Gray Gray
ズーム 有効にする/無効にする
Display
Control Tiling Mode 5X5 Horizontal 01~5
19
マルチ画面 ズームモー 5X5 水平 01~5
ド
Vertical 01~5
垂直 01~5
Horizontal 01~5
Screen
5X5 水平 01~5
Position
5X5 Vertical 01~5
画面位置
垂直 01~5
1
Monitor ID 01~25
(Must set the PID monitor ID in RS232C control and IR
モニターID 01~25
dasiy chain mode.)
Frame
OFF
Compensation On/Off
(If turn on, display area will compensate (zoom in) the
フレーム補 オン/オフ
up/down/left/right border width.)
正
Specification of "AUTO"
ID.
パワーオン Steps, Auto -For "Power On Delay", when "AUTO" is chosen, each
Model Name
TD-E652
モデル名
SW Version
ソフトウェ
System ex. 1.01.00
アバージョ
Information
ン
システム情
LAN Version
報
LAN バージ 1.05.00
ョン
IP Address
ex. 192.168.2.1
IP アドレス
20
5.1 LED indication
3 VOLUME + Volume up
21
5.3 OSD IR Remote control
22
5.4 Remote controller Key
Item Specification Remark
1 POWER Power ON/OFF
2 PICTURE Picture mode
3 1 DIGI Key 1 Use in IR Daisy Chain Mode
4 2 DIGI Key 2 Use in IR Daisy Chain Mode
5 3 DIGI Key 3 Use in IR Daisy Chain Mode
6 4 DIGI Key 4 Use in IR Daisy Chain Mode
7 5 DIGI Key 5 Use in IR Daisy Chain Mode
8 6 DIGI Key 6 Use in IR Daisy Chain Mode
9 7 DIGI Key 7 Use in IR Daisy Chain Mode
10 8 DIGI Key 8 Use in IR Daisy Chain Mode
23
Item Specification Remark
35 backward Backward
36 Play Play media
37 forward Forward
38 PIP PIP on/off No function
39 Previous previous
40 Stop Stop play
41 Pause Pause media
42 Next next
24
Note1:IR Input/ IR Pass-Though / Line Input /Line Out
IR Input IR Pass-Though
Pin No Name Pin No Name
1 GND 1 GND
2 IR IN Select 2 IR Out Select
3 +3V3 3 No function
25
Note2:VGA In
26
Note3:HDMI Input
27
Note4:DVI Input/DVI Output
28
Note5:USB Input
Pin No Name
1 VCC (+5V)
2 Data -
3 Data +
4 GND
29
Note6:RS232C Input/RS232C Output
Pin No Name
1 N.C.
2 RXD
3 TXD
4 N.C.
5 GND
6 N.C.
7 N.C.
8 N.C.
9 N.C.
30
Note7:RJ45 (LAN)
Pin No Name
1 TX_D1+
2 TX_D1-
3 TX_D2+
4 TX_D3+
5 TX_D3-
6 TX_D2-
7 TX_D4+
8 TX_D4-
31
Note8:AV Input
Component Composite
Pin No
Name Name
1 GND GND
2 RGB_RED NC
3 RGB2_BLUE NC
4 `RGB2_GREEN AV IN
32
7.Video specifications
7.1. General Specifications
No Item Min Typ Max Unit Remark
1 Over scan, Vertical 2 - 5 % Video
2 Over scan, Horizontal 2 - 5 % Video
3 Component Video Input Level (Y, CB/PB, CR/PR) 0.6 0.7 0.8 Vpp 75 ohm without Sync
4 PC RGB Video Input Level 0.6 0.7 0.8 Vpp 75 ohm without Sync
5 PC H/V Input Level 5 TTL Level
6 Composite Video Input Level (CVBS, S-Video) 0.6 0.7 0.8 Vpp 75 ohm without Sync
-Color Distortion
Every color should distinguish.
3 Color Bar -Noise, Beat Fail: whether there are color distortion, beat
and spark line noises on the picture.
-Color Tangent
-Unstable Picture Image should stay stable, and should not have
5 Input/Channel Change Noise(Picture Garbage) noise (picture garbage).
Fail: if image become flickers, or Noise.
-Screen Flashing
33
8. Audio specifications
8.1. Speaker Out
Item Specifications Remark
Maximum Audio iutput 5 W each channel @ 0.5Vrms input, 1kHz tone, THD < 10%
Maximum Audio Output 5 W each channel @ 0.5Vrms input, 1kHz tone, THD < 10%
THD+N vs Power 10% @ 0 ~ 0.5 Vrms input, 1 kHz tone PC input:0 ~ 1Vrms
Speaker Output
34
8.2. Line out
The following performance specifications are supported for analog stereo audio output:
Impedance
Maximum Audio Output 0.5Vrms, 1kHz tone, THD < 1% Variable mode
35
9. Mechanical Specifications
9.1. General Specification
a) S645HF44 V0
Six View Drawing
36
No Item Content Remark
Width Length Height Unit
Container 20 ft 40 ft 40ft(HQ)
Individual or
2 Loading
Palletizing 30 70 140
Quantity
Front Cover : ABS MT11020
3 Appearance General
Back Cover : ABS MT11020
c) Operation environment for portrait and face down (between 0° and 15°) installation
37
The following operation environment details apply when the display is installed in portrait and face up orientations.
• Temperature 0 - 40°C / 32 - 104°F
• Humidity 20 - 80% (without condensation)
Note:Detail specs follow Darwin TD-E Project Cosmetic Quality Standard spec
38
10. Safety
10.1. Test Method
10.1.1. Performance: Display test methods follow Darwin Public Information Display test items or Customer’s spec
10.1.2. Demanded other specification
Model Market Appliance Compliance Note
UL/cUL
UL 60950-1, 2nd Edition
FCC with 740 form (FCC
CSA C22.2 No. 60950-1-07, 2nd Edition
logo) *The LCD Display
Part-15B
ICES-003(Canada) can be operated in
IEC 60950-1:2005 (Second Edition) + Am
CB landscape (0°) to
1:2009 + Am 2:2013
CE portrait mode (90°),
North EN 55022/EN55024
PSE building-in power
America J60950-1(H26) /J3000(H25)
S-Mark supply board on the
S500HF44 V0 Japan J55022:H22
JEITA top).
Europe JIS C 61000-3-2
RCM
Australia AS/NZS CISPR 22:2009 with Amdt 1
(2010)
Energy Star(EPA6.0-Program
Requirements for Displays)
HDMI ATC (HDCP)
RoHS 2002/95/EC
39
10.2 Regulation
No Item Min Typ Max Unit Note
The models with wall mount,
1 Force Stability – Incline Plane Tip Test 10 -- -- deg
without assessment
Isolation Gap,
2 AC-AC 420Vpeak (clearance) 2.0 -- -- 2 1. Safety distance for
Primary-GND components with 10N force
Isolation Gap, for judgment.
3 420Vpeak (clearance) 4.0 -- -- 3
Primary-Secondary 2.Normal a.c. Mains
Isolation Gap, 300Vrms (Cree page) 3.2 -- -- 4 voltage≦150V;Pollution
Primary –GND 400Vrms (Cree page) 4.0 -- -- degrees 2
4
Isolation Gap, 250Vrms (Cree page) 6.4 -- -- 3.Reference the UL 60950
Primary-Secondary 400Vrms (Cree page) 8.0 -- --
It is Darfon Power Board spec
only for maximum loading (not
a set spec)
Main board:
Power Consumption(power Board), Max 313 W
5 5.1V/4A,12.5V/4A
LED Driver Board:
24V/7.5A
Tatol:313W
40
No Item Min Typ Max Unit Note
to Equipment main
protective <3.5 mA
earthling terminal
9 Sharp Edge NA
IEC/EN/UL 60950-1/CSA C22.2
No. 60950-1-07,
Safety UL/ cUL/CB/S-mark
10 Compliance J60950-1(H22):2010
J3000(H25)
EMC FCC/PSE/CE/S-mark/RCM
Class I Apparatus only.
Earth Continuity
11 Primary to PE ≤0.1Ώ at 40A / 2min (MP-3sec) 1. 40A / 2min.(CSA)
Test
2. 32A / 2min.
three times the weight of the
12 Wall mount equipment but not less than 50 N.
/1min
41
11.2. EMC Reliability
No Item Min Typ Max Unit Remark
1 ESD(EN61000-4-2) 2 8 kV Follow EN61000-4-2
2 EFT/Burst (EN61000-4-4) 0.5 1 kV Follow EN61000-4-4
3 Surge Immunity (EN61000-4-5) 0.5 2 kV Follow EN61000-4-5
4 Voltage Dip Test, 10ms (EN61000-4-11) <95 % Follow EN61000-4-11
5 Voltage Dip Test, 500ms(EN61000-4-11) 30 % Follow EN61000-4-11
6. Voltage Interruptions, 5s(EN61000-4-11) <95 % Follow EN61000-4-11
7 CS(EN61000-4-6) 3 V Follow EN61000-4-6
8 EMI Test -1 -3 dBμV Follow EN55022
9 Harmonic Current Test (EN61000-3-2) Follow EN61000-3-2
10 Voltage Flicker Test (EN61000-3-3) Follow EN61000-3-3
11 RS (EN61000-4-6) 3 V Follow EN61000-4-6
12 PFMF (EN61000-4-8) 1 A Follow EN61000-4-8
Input Voltage:264V/63Hz
Output load: normal load
5V_STB:4A
13 Open & Short Abnormal Test 12V:4A
VLED:0.32A
(For power board only)
(Portrait/Land Scope)
(Portrait/Land Scope)
40 C
Humidity Test
16
-72 Hours Power Off (Store)
90 %
(Portrait/Land Scape)
42
No Item Min Typ Max Unit Remark
(Portrait/Land Scope)
1. Mean measure ambient
temperature.
2. Thermal profile measure
18 Thermal Profile Test 25 40 C Item : PCB/Cabinet inner
and outside/power cord
and AC plug
3. Portrait/Land Scope
19 Condensation Test NA NA
20 Transportation Test NA NA
21 Overstress Test NA NA
22 Durability Test NA NA
1. Half of q'ty ; Power on
continuously
40 C 2. Half of q'ty ; Power on
intermittently(on/off
23 Aging Test condition) (Power ON/ 13
minutes, Power OFF/ 2
150 hrs minutes.)
3. Portrait/Land Scape
SET: 30
40 C
24 Life Test Days:35
30,000 hrs Portrait/Land Scape
85% Engineering Pilot-Run
25 Yield Rate 90% Production Pilot-Run
95% 1st Mass Production
43
12. Accessory
12.1. Accessories
No Item P/N (Darwin) Unit Remark
1 Battery 23.20000.010 2 AAA Type
4 PE Bag 79.42S19.002 1
44
5 Cable Cramp 79.64S0J.P01 5
8 Remote 49.43S04.001 1
45
11 Power cord for Japan 27.02318.001 1 For Japan model
46
2 Spec Label(Rating) 82.50S0R.001 1 On Set Rear (170x80mm)
47
4 Shipping Label 82.37S01.012 2 On Carton side (Carton Label76x70mm)
48
Specification
Product Specification
1. Scope
This document establishes the general workmanship standards and functional Acceptance criteria for
LCD TV model TD-E652 Produced by Darwin Precisions Inc.
2. Purpose
The purpose of this publication is to define a procedure for inspection of the LCD TV by means of a
customer acceptance test, the method of evaluation of defects and rules for specifying acceptance levels.
3. Application
The "Customer Acceptance Criteria" is applicable to the inspection of the LCD TV, completely packed
and ready for dispatch to customers. Unless otherwise specified, the customer acceptance inspection
should be conducted at manufacturer's site.
4. Definition
The "Customer Acceptance Criteria" is the document defining the process of examining, testing or
otherwise comparing the product with a given set of specified technical, esthetic and workmanship
requirements leading to an evaluation of the "degree of fitness for use", including possible personal injury
or property damage for the user of the product.
5. General Description
This specification applies to the 65 inch Color TFT-LCD Module S645HF44 V0 (96.64S0J.001). This LCD
module has a TFT active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 65 inch.
This module supports 1,920x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots
which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined
with a 10-bit gray scale signal for each dot.
* General Information
49
Display Operation Mode Normally Black
Surface Treatment Anti-Glare, 3H Haze=2%
Weight 18,000 g
7. Optical Specification
Optical characteristics are determined after the unit has been ‘ON’ and stable for approximately 45 minutes in a
dark environment at 25°C. The values specified are at an approximate distance 500 mm from the LCD surface at a
viewing angle of φ and Ө equal to 0°.
50
Fig.1 presents additional information concerning the measurement equipment and
method.
Values
Parameter Symbol Unit Notes
Min. Typ. Max
Note:
1. Contrast Ratio (CR) is defined mathematically as:
2. Surface luminance is luminance value at point 5 across the LCD surface 50cm from the surface with all pixels
displaying white. From more information see FIG 2. LWH=Lon5 where Lon5 is the luminance with all pixels
displaying white at center 5 location.
51
3. The variation in surface luminance, _WHITE is defined (center of Screen) as:
δHITE(9P)= Minimum(Lon1, Lon2,…,Lon9)/ Maximum(Lon1, Lon2,…Lon9)
4. Response time Tr is the average time required for display transition by switching the input signal for five
luminance ratio (0%,25%,50%,75%,100% brightness matrix) and is based on Fv=60Hz to optimize.
The response time is defined as the following figure and shall be measured by switching the input signal for “any level of grey (bright) “and “any
Any level of gray (Bright) Any level of gray (Dark) Any level of gray (Bright)
FIG. 2 Luminance
5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the horizontal or x
axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see
FIG3.
52
FIG.3 Viewing Angle
53
8. Interface Specification
The S645HF44 V0 (96.64S0J.001) requires two power inputs. One is employed to power the LCD
electronics and to drive the TFT array and liquid crystal. The other is to power Back Light Unit.
54
Note3. Measurement condition: Rising time = 400us
Note4. The relative humidity must not exceed 80% non-condensing at temperatures of 40 ℃ or less. At temperatures
greater than 40 ℃, the wet bulb temperature must not exceed 39 ℃. When operate at low temperatures, the
brightness of LED will drop and the life time of LED will be reduced.
Note5. The lifetime (MTTF) is defined as the time which luminance of LED is 50% compared to its original value.
[Operating condition: Continuous operating at Ta = 25±2℃]
8-2 Interface Connections
LCD connector: JAE FI-RE51S-HF
Note1. Pin number start from the left side as the following figure.
55
Note2. Please leave this pin unoccupied. It can not be connected by any signal (Low/GND/High).
Note3. Input control signal threshold voltage definition
56
LVDS Option = Low JEIDA
57
58
9. Signal Timing Specification
9-1 Input Timing
This is the signal timing required at the input of the user connector. All of the interface signal timing
should be satisfied with the following specifications for its proper operation.
59
60
9-2 Input interface characteristics
Value
Parameter Symbol Unit Note
Min Tpy. Max
Input Differential Voltage VID 200 400 600 mVDC 1
61
Note3. LVDS Receiver Clock SSCG (Spread spectrum clock generator) is defined as below figures .
62
9-3 Power Sequence for LCD
Values
Parameter Unit
Min.
Min. Type. Max.
t1 0.4 --- 30
t2 0.1 --- 50
t3 450 ---
*1
t4 0 ---
t5 0 ---
*2
t6 --- --- ---
t9 0 --- ---
Note:
(1) t4=0 : concern for residual pattern before BLU turn off.
(2) t6 : voltage of VDD must decay smoothly after power-off. (customer system decide this value)
(3) When CMOS Interface signal is N.C. (no connection), opened it Transmitted end,t8 timing spec can be
negligible.
63
10. Backlight Specification
10-1 Electrical Characteristics
None LED driver board
64
11. Mechanical Characteristics
The contents provide general mechanical characteristics for the model S645HF44 V0 (96.64S0J.001). In
addition the figures in the next page are detailed mechanical drawing of the LCD
65
1 2 3 4 5 6 7 8 9
REV ECN DESCRIPTION SIGN DATE
NO.
X0 - FIRST RELEASE TINA YT 2015/06/29
CHENG
A A
NOTES:
1. UNSPECIFIED TOLERANCE IS +/-0.8mm.
2. TOQUE OF M3 USER HOLE : 6kgf-cm MAX.
3. TOQUE OF M5 USER HOLE : 10kgf-cm
B MAX. B
4. TOQUE OF M6 USER HOLE : 12kgf-cm Y
MAX.
Z
C C
D D
1446.28(OUTLINE)
Z
1428.48
Z 62.61
Y
E E
714.24
F F
G G
403.01
66
H H
X X
803.52(ACTIVE AREA)
I I
X
824.82(OUTLINE)
J J
K
L
M
47.01 N
O
Z P
Y
UNIT SCALE WEIGHT ANGLE GENERAL ORIGINAL
TOLERANCE 3rd Angle MODEL
mm 0.500 - S645HF44 V0
LEVEL General tolerance AS TITLE
DIM. 1 2 3 NOTE SIX DIAGRAM OF MODULE-S645HF44
-
0 ~ 4 0.1 DARWIN NO. (PART
NO.)
V0
CUSTOMER NO.
NO.)
(PART
4 ~ 14 0.1
APPROVED WENCHI 2015/06/29 - NA
14 ~ 63 0.1
WU SIZE SHT
63 ~ 250 0.2 CHECKED CHRIS 2015/06/29 DARWIN REV : X0
2
250 ~ 600 0.3 DONG
600 ~ 4000 0.6 DESIGNED TINA YT 2015/06/29 A0 1/2 CUSTOMER REV
CHENG :NA
2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
REV ECN DESCRIPTION SIGN DATE
NO.
X0 - FIRST RELEASE TINA YT 2015/06/29
CHENG
A A
NOTES:
1. UNSPECIFIED TOLERANCE IS +/-0.8mm.
B B
2. TOQUE OF M3 USER HOLE : 6kgf-cm MAX.
3. TOQUE OF M5 USER HOLE : 10kgf-cm
MAX.
4. TOQUE OF M6 USER HOLE : 12kgf-cm
MAX.
C C
D 303.50(3X) D
233.00(3X) 338.00(2X)
119.00(2X) 169.00(2X)
Y
E E
F F
G G
67.00(2X)
142.00(2X)
159.00(2X)
67
H H
204.00(2X)
X
318.00(3X)
I I
J J
141.67
26.67(2X)
254.67(2X)
253.80(2X)
K
L
M
85.00(2X) 125.50
N
170.00(2X) 197.00(2X)
91.00 391.84 569.92(2X)
O
P
UNIT SCALE WEIGHT ANGLE GENERAL ORIGINAL
TOLERANCE 3rd Angle MODEL
mm 0.500 - S645HF44 V0
LEVEL General tolerance AS TITLE
DIM. 1 2 3 SELECT NOTE SIX DIAGRAM OF MODULE-S645HF44
-
0 ~ 4 0.1
LEVEL
FINISH
DARWIN NO. (PART
NO.)
V0
CUSTOMER NO.
NO.)
(PART
4 ~ 14 0.1
APPROVED WENCHI 2015/06/29 - NA
14 ~ 63 0.1
WU SIZE SHT
63 ~ 250 0.2 CHECKED CHRIS 2015/06/29 DARWIN REV : X0
2
250 ~ 600 0.3 DONG
600 ~ 4000 0.6 DESIGNED TINA YT 2015/06/29 A0 2/2 CUSTOMER REV
CHENG :NA
2 3 4 5 6 7 8 9
12. Reliability Test Items
Refer to 99.64S0J.0AA
68
Packing
1. International Standard
1.1 Definition of Label
A. Panel Label:
B. Carton Label:
None
1.2 Packing Methods
None
1.3 Pallet and Shipment Information
None
69
Disassembly / Assembly
1. Disassembly Base Hinge
70
3. Remove SPK
4. Remove Keypad IR BD
5. Main BD
71
Appendix 1 Block Diagram
72
c. RGB Input (PC)
Standard Active Resolution
Refresh Rate Pixel Rate Standard Mode
Resolution H Pixels V Lines
60 Hz 25.175 MHz
VGA 640 480 72 Hz 31.5 MHz Video Graphic Array
75 Hz 31.5 MHz
WVGA 720 400 70 Hz 28.32 MHz Wide Video Graphic Array
60 Hz 40 MHz
SVGA 800 600 Super VGA
75 Hz 49.5 MHz
60 Hz 65 MHz
XGA 1024 768 Extended Graphic Array
75 Hz 78.75 MHz
WXGA 1280 768 60 Hz 79.5 MHz Wide XGA
WXGA 1280 800 60 Hz 83.5 MHz Wide XGA
SXGA 1280 960 60 Hz 108 MHz Super XGA
SXGA 1280 1024 60 Hz 108 MHz Super XGA
WXGA 1360 768 60 Hz 85.5 MHz Wide XGA
WXGA 1366 768 60 Hz 85.5 MHz Wide XGA
UXGA 1600 1200 60 Hz 162 MHz Ultra XGA
HD1080 1920 1080 60 Hz 148.5 MHz HD1080
Note:
73
No Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) comment
4 720x576 31.25 50P 27 SDTV 576P/50Hz
5 1280x720 45.00 60P 74.25 HDTV 720P/60Hz
6 1280x720 37.75 50P 74.25 HDTV 720P/50Hz
7 1920x1080 33.75 60i 74.25 HDTV 1080I/60Hz
8 1920x1080 28.13 50i 74.25 HDTV 1080I/50Hz
9 1920x1080 67.5 60P 148.5 HDTV 1080P/60Hz
10 1920x1080 56.25 50P 148.5 HDTV 1080P/50Hz
11 1920x1080 27 24 74.25 HDTV 1080P/24Hz
12 1920x1080 28.13 25 74.25 HDTV 1080P/25Hz
13 1920x1080 33.75 30 74.25 HDTV 1080P/30Hz
74
Appendix 3 Packing
75
Appendix 4 Shipping
76
Appendix 5 Troubleshooting
a. Flow chart of System Trouble Shooting
Yes
Backlight OK?
No
(No full white) 1. Check cable connection between main board and Power Board
3.
Yes
IR Remote 1. Check remote controller battery.
No 2. Check remote controller.
control, keypad,
and LED OK? 3. Check wire connection between main board, keypad and IR
board.
Yes
OSD Image OK? No 1. Check cable connection between main board and LCD panel.
Yes
Yes
No signal? 1. Check input cable.
2. Check OSD source set up.
No
No
Audio OK? Yes
1. Check wire between Main board to speaker.
2. Check audio input connection.
77
b. Flow chart of Main board trouble shooting
Yes
PC OK? Check
No RD31,RD33,RD35,RD36,RD38,,UM1
Yes
No
Audio OK? No Check U7,UM1 Check U8
Yes
No No 1. Check U52
HEADPHONE Check C413,C414
2. Check J90
OK?
Yes
No No
SPDIF OK? Check 5V_SW,R2800 1. Check UM1
2. Check U56
Yes
TV OK? No Check
Tuner5V,BT-30V,RF_AGCT
78