Professional Documents
Culture Documents
For Guitars Having Strat-Type Pickup Selector Switch
For Guitars Having Strat-Type Pickup Selector Switch
For Guitars Having Strat-Type Pickup Selector Switch
NECK PU
MIDDLE PU
all ground con- OR,
DRIVER
BRIDGE PU
NOT TO POTs
nections are POTENTIOMETER
solder
made. Solder ground
connection here. to tab
3-pickups First, file off plating.
1-driver shield
2-circuit board not here SWITCH
1-Battery (-)
OUTPUT IMPORTANT
1-output jack
JACK To prevent distortion
2 or 3-pots bodies
BL
(not switch bodies) ("grunge") and oscillation:
K
TIP Keep driver wires
(blue, gray, brown)
PICKUP SWITCH POSITIONS RING away from signal wires.
when sustainer = OFF GRN It might be necessary
1. BRIDGE HB VOL. to shield driver wires
2. BR. + MIDDLE C or pickup signal wires.
3. MID. B
POWER SW
B
4. MID. + NECK M
5. NECK M HARMONIC SW RED
N Splice
N DRIVE
C ORN
BLK
WHT
white R
red
gray SUSTAINIAC brown BRN
KEEP
BLK STEALTH gray GRAY SHORT BLUE YEL
CIRCUIT BOARD blue
green 9V
yellow VIO
black BATTERY
GAIN orange
violet
VR1 blue Drive pot optional. Can
MORE GRUNGE PREVENTION: replace tone pot. If not
Keep circuit board away from pickup used, just connect the 2
signal wires. If this is impossible, then blue wires together, after
shortening to about 1 in.
the board must be shielded with copper tape.