1. The document outlines the job hazard analysis for hiring a motor grader. It identifies 4 key activities: checking the log sheet, using proper PPE, checking various parts of the grader, and performing a post-start checkup.
2. For each activity, potential hazards are identified relating to safety, environment and quality. Safe controls are also specified such as wearing PPE correctly, inspecting equipment, and gradually building engine pressure and RPM.
3. Responsibilities are assigned to the supervisor and grader operator. Training, experience and availability of a site in-charge are required. Signatures are needed from the JHA team to verify the analysis.
1. The document outlines the job hazard analysis for hiring a motor grader. It identifies 4 key activities: checking the log sheet, using proper PPE, checking various parts of the grader, and performing a post-start checkup.
2. For each activity, potential hazards are identified relating to safety, environment and quality. Safe controls are also specified such as wearing PPE correctly, inspecting equipment, and gradually building engine pressure and RPM.
3. Responsibilities are assigned to the supervisor and grader operator. Training, experience and availability of a site in-charge are required. Signatures are needed from the JHA team to verify the analysis.
1. The document outlines the job hazard analysis for hiring a motor grader. It identifies 4 key activities: checking the log sheet, using proper PPE, checking various parts of the grader, and performing a post-start checkup.
2. For each activity, potential hazards are identified relating to safety, environment and quality. Safe controls are also specified such as wearing PPE correctly, inspecting equipment, and gradually building engine pressure and RPM.
3. Responsibilities are assigned to the supervisor and grader operator. Training, experience and availability of a site in-charge are required. Signatures are needed from the JHA team to verify the analysis.
1. The document outlines the job hazard analysis for hiring a motor grader. It identifies 4 key activities: checking the log sheet, using proper PPE, checking various parts of the grader, and performing a post-start checkup.
2. For each activity, potential hazards are identified relating to safety, environment and quality. Safe controls are also specified such as wearing PPE correctly, inspecting equipment, and gradually building engine pressure and RPM.
3. Responsibilities are assigned to the supervisor and grader operator. Training, experience and availability of a site in-charge are required. Signatures are needed from the JHA team to verify the analysis.
Job Description Hiring Of Motor Grader NR/CSMS/JHA/1.2-B/R- 01 Team Who has done JHA Safety Supervisor Activities Potential Hazards Safe Guards / Controls to be put in Responsibility place 1.Check the log sheet of Safety: Responsible person will Supervisor grader Haste or shortcut conduct inspection, Grader Operator Environment: NA monitor the work Quality: NA activities and have to ensure safety standards and procedures are strictly adhered to.
Required PPE Required Required Skill/Training Experienced site in-
Tools/Equipment charge/supervisor Safety TBT Available shoe,Safetyjacket,helmet, goggles,nosemask.gloves
Signature of JHA Team Members
NAVEEN ROADWAYS JOB HAZARD ANALYSIS
Dept./Section JHA no:-
Location of Job Date:-
Job Description Hiring Of Motor Grader NR/CSMS/JHA/1.2-B/R- 01 Team Who has done JHA Safety Supervisor Activities Potential Hazards Safe Guards / Controls to be put in Responsibility place 2. Use Of PPE SAFETY By wearing the PPEs in the Supervisor Non-usage of PPEs proper way. Using chin Grader Operator ENVIRONMENT strip of the helmet. Always NA use the seat belt while QUALITY riding the machine. Faulty PPEs Check the condition of PPEs before using them to ensure adequate personal protection.
Required PPE Required Required Skill/Training Experienced site in-
Tools/Equipment charge/supervisor Safety TBT Available shoe,Safetyjacket,helmet, goggles,nosemask.gloves
Job Description Hiring Of Motor Grader NR/CSMS/JHA/1.2-B/R- 01 Team Who has done JHA Safety Supervisor Activities Potential Hazards Safe Guards / Controls to be put in Responsibility place 3. Checking grader tyres SAFETY Look for condition of the condition & pressure, For having an cylinders, tyres, tyre Grader Operator lights condition , glass, assessment of protection chains, blades coolant level , lubricant physical health and tooth points, loose level, radiator fins of parts, light, ladders, fire condition, horn , rear view camera, hydraulic grader ,conditio extinguishers and oil level, fuel level check. n of gauges. Look for clearance grader ,tooth for taking out the grader points, ladder, from parking. Always lights , levels of maintain three point oil and fuel, fire contacts while climbing up extinguishers. and getting down from the Protection of ladders and make sure man/animal that they are not in and machinery. slippery condition. ENVIRONMENT Any oil spillage beneath Oil leakages the machine or oil leakage QUANTITY from any part of the NA machine.
Required PPE Required Required Skill/Training Experienced site in-
Tools/Equipment charge/supervisor Safety TBT Available shoe,Safetyjacket,helmet, goggles,nosemask.gloves
Job Description Hiring Of Motor Grader NR/CSMS/JHA/1.2-B/R- 01 Team Who has done JHA Safety Supervisor Activities Potential Hazards Safe Guards / Controls to be put in Responsibility place 4. Post start check-up. SAFETY By checking / visually Faulty inspecting each safety Grader Operator functioning of devices ( horn, brakes, brakes , horn, audio visual alarms , rear light, seat belt, view camera, RPM meter, different temp. meter , oil gauge etc) meters, and one by one to make sure sensors, audio that everything is working visual alarms, properly. rear view Valid PUC certification camera. from Govt. agencies. ENVIRONMENT Look for engine oil Bad quality and pressure and RPM build quantity of smoke up by increasing the emission and any oil pressure and RPM leakages. gradually. QUALITY Inadequate pressure and RPM build up.
Required PPE Required Required Skill/Training Experienced site in-
Tools/Equipment charge/supervisor Safety TBT Available shoe,Safetyjacket,helmet, Road Safety Training as planned goggles,nosemask.gloves
Job Description Hiring Of Motor Grader NR/CSMS/JHA/1.2-B/R- 01 Team Who has done JHA Safety Supervisor Activities Potential Hazards Safe Guards / Controls to be put in Responsibility place 5. Taking out the grader SAFETY Take the route as Grader Operator to the assigned operating Collision with other instructed by authorities, location machinery, runaway follow traffic rules , and from haul road, watch out for other damage to machine, machinery on the way. infrastructure. Over- Always keep the blades head power approximately 1 m above transmission lines ground during movement. etc. Check for overhead lines ENVIRONMENT during movement. Always Dust due to high ensure that an area of 30 speed movement, meter is visible before Heavy rainfall, moving the grader. storm, dense fog, Maintain the speed limit; poor visibility. on occasion of high dust QUALITY generation reduce the Delay in reaching speed of the grader. In the designated case of heavy loading point. rainfall ,storm, dense fog, and poor visibility stop any kind of movement and keep the lights of grader on. Take the route as instructed by authorities , for any obstruction observed during the movement., inform the authorities for any alternatives. Required PPE Required Required Skill/Training Experienced site in- Tools/Equipment charge/supervisor Safety TBT Available shoe,Safetyjacket,helmet, Road Safety Training as planned goggles,nosemask.gloves
Signature of JHA Team Members
NAVEEN ROADWAYS JOB HAZARD ANALYSIS
Dept./Section JHA no:-
Location of Job Date:-
Job Description Hiring Of Motor Grader NR/CSMS/JHA/1.2-B/R- 01 Team Who has done JHA Safety Supervisor Activities Potential Hazards Safe Guards / Controls to be put in Responsibility place 6. Check after start. SAFETY Look for the space Non-clearance for available for safe Grader Operator movement of the operation of grader and grader and dumper, dumper at the loading presence of fines, point. Also look for stack bad condition of the height , space for truck working floor. movement and conditions ENVIRONMENT surrounding and other Water logging in the vehicle dumping and operating area. Poor inform the situation to visibility site- in-charge/foreman. QUALITY Check for any water NON-availability of logging at the face ,also desired material for check the status of loading. visibility for safe operation of machinery. Visually inspect the material is of same variety as instructed by Site In- charge. For any doubt/clarification immediately inform the SIC. Required PPE Required Required Skill/Training Experienced site in- Tools/Equipment charge/supervisor Safety TBT Available shoe,Safetyjacket,helmet, goggles,nosemask.gloves
Signature of JHA Team Members
NAVEEN ROADWAYS JOB HAZARD ANALYSIS
Dept./Section JHA no:-
Location of Job Date:-
Job Description Hiring Of Motor Grader NR/CSMS/JHA/1.2-B/R- 01 Team Who has done JHA Safety Supervisor Activities Potential Hazards Safe Guards / Controls to be put in Responsibility place 7. Grading Operation SAFETY All operators to follow Supervisor Operator competency; designated traffic routes; Grader Operator Worker pedestrian routes to be Pedestrian designed and implemented with interaction; clear signage to provide segregation; Operator visibility Flagmen to be used to control Fire grader and tipper movements. Where practicable areas to be Toppling designated no pedestrians, with ENVIRONMENT flagmen stationed clear of Water logging in the equipment movements in clear operating area. Poor view; visibility Mandatory fire detection & QUALITY suppression system to be NON-availability of installed on the machine. desired material for The Logistics plan shall clearly grading. illustrate plant entry and exit points; No reversing at any time without flagman; Grader operators wear seat belts at all times; Reversing light fitted to cab and used at all times, reversing horn fitted and in working condition. No shades to be fitted to glass to hinder operator vision;. Check for any water logging at the face ,also check the status of visibility for safe operation of machinery. Visually inspect the material is of same variety as instructed by Site In-charge. For any doubt/clarification immediately inform the SIC. Required PPE Required Required Skill/Training Experienced site in- Tools/Equipment charge/supervisor Safety TBT Available shoe,Safetyjacket,helmet, Road Safety Training as planned goggles,nosemask.gloves
Signature of JHA Team Members
NAVEEN ROADWAYS JOB HAZARD ANALYSIS
Dept./Section JHA no:-
Location of Job Date:-
Job Description Hiring Of Motor Grader NR/CSMS/JHA/1.2-B/R- 01 Team Who has done JHA Safety Supervisor Activities Potential Hazards Safe Guards / Controls to be put in Responsibility place 8. Signalling to other SAFETY Use one short horn for Supervisor tippers passing by. Collision during signalling the tipper Grader Operator placement, improper operator for making way, placement . Blow a long horn to give a ENVIRONMENT warning signal . Wastage of fuel Avoid long queuing of QUALITY dumpers. Change in final Communicate to shift in- destination due to charge. changed material quality/other reasons (presence of metallic material /woods etc)
Required PPE Required Required Skill/Training Experienced site in-
Tools/Equipment charge/supervisor Safety TBT Available shoe,Safetyjacket,helmet, Defensive Driving Training & Road goggles,nosemask.gloves Safety Training as planned
Job Description Hiring Of Motor Grader NR/CSMS/JHA/1.2-B/R- 01 Team Who has done JHA Safety Supervisor Activities Potential Hazards Safe Guards / Controls to be put in Responsibility place 9. Leakages SAFETY Keep grader at a safe place Grader Operator Unsafe employees and communicate to the and equipment shift in charge via mobile ENVIRONMENT phone. Ground Stop the machine contamination due immediately to control the to leakages. leakage , and inform the QUALITY shift in-charge. NA
Required PPE Required Required Skill/Training Experienced site in-
Tools/Equipment charge/supervisor Safety TBT Available shoe,Safetyjacket,helmet, goggles,nosemask.gloves
Job Description Hiring Of Motor Grader NR/CSMS/JHA/1.2-B/R- 01 Team Who has done JHA Safety Supervisor Activities Potential Hazards Safe Guards / Controls to be put in Responsibility place 10.Parking the grader SAFETY Always park the grader on Supervisor Parking at level ground and at its Grader Operator undesignated place, designated parking roll down of grader, place( if available). Keep parking when the the blades of grader on the grader is down ground after parking. If ENVIRONMENT the machine is down NA during operation park the QUALITY grader after consultation NA with SIC and transporter supervisors. Place the wheel choke properly.
Required PPE Required Required Skill/Training Experienced site in-
Tools/Equipment charge/supervisor Safety TBT Available shoe,Safetyjacket,helmet, goggles,nosemask.gloves
Job Description Hiring Of Motor Grader NR/CSMS/JHA/1.2-B/R- 01 Team Who has done JHA Safety Supervisor Activities Potential Hazards Safe Guards / Controls to be put in Responsibility place 11.Post stop check of the SAFETY Visually inspect the machine after Supervisor grader Bad condition of stopping the machine . Look of any Grader Operator machine and its abnormality/sign of damages , parts. tyre cuts etc. ENVIRONMENT NA Look for any oil leakages after QUALITY stopping the machine. NA
Required PPE Required Required Skill/Training Experienced site in-
Tools/Equipment charge/supervisor Safety TBT Available shoe,Safetyjacket,helmet, goggles,nosemask.gloves
Job Description Hiring Of Motor Grader NR/CSMS/JHA/1.2-B/R- 01 Team Who has done JHA Safety Supervisor Activities Potential Hazards Safe Guards / Controls to be put in Responsibility place 12. Shift end report SAFETY Report the abnormalities of Supervisor Bad condition of grader to transport supervisors Grader Operator machine and its and SIC. parts, location of parking. Check for any leakages from the ENVRIONMENT machine and report the same, Oil Leakage QUALITY If possible give details report for Improper next shift operation. Communication
Required PPE Required Required Skill/Training Experienced site in-
Tools/Equipment charge/supervisor Safety TBT Available shoe,Safetyjacket,helmet, Road Safety Training as planned goggles,nosemask.gloves