Professional Documents
Culture Documents
n3135 Regulator
n3135 Regulator
CAUTION This symbol is used to indicate presence of hazards that can cause minor property damage.
When the N1225-1 and the N1505-1 alternators are used in single voltage applications, the alterna-
tor phase cable MUST be attached to the N3135 regulator instead of the factory-attached cap shown
in Figure 1.
This cap w/attached chain
CAUTION provided in envelope assembly
must be assembled as shown
on regulator, except as noted
T above. Failure to do
so can lead to equipment
damage.
➛ 2 places - torque to
3.4 Nm / 30 lb.in.
(make sure all hardware
has been installed)
1 place - torque to 10.2 Nm / 90 lb.in.
(make sure all hardware has been ➛ N3135
Regulator
installed, including spacers, if required) ➛
+14 V terminal -
not used on
Alternator-to-regulator
single volt
harness receptacle
➛ applications.
➛
Regulator – “AC” Terminal ➛ Regulator – “IGN” Terminal
Washer ➛
➛
Locknut, #10-24;
torque to 2.3 Nm / 20 lb.in.
Washer
➛
➛
➛
Nut, 1/4-20; torque to
2.8 Nm / 25 lb.in.
➛
2A Boots (p/n N9464,
Vehicle
supplied in
harness ➛ envelope assembly)
568
FIGURE 1
Page 1 of 2 II0028D
N3135 Regulator in Dual Voltage (28 V/14 V) Applications
MAKE CONNECTIONS AS SHOWN BELOW IN FIGURE 2:
Phase
connector cap
removed and
2 places - torque to Vehicle harness
➛
wiring attached
3.4 Nm / 30 lb.in. (to +14V battery)
(make sure all hardware has A
68
➛ been installed)
1 place - torque to
10.2 Nm / 90 lb.in. Boot (p/n N9564,
(make sure all hardware has ➛ supplied in
been installed, including envelope assembly)
➛
spacers, if required) ➛
N3135 Nut, 5/16-18 UNC-2B;
Regulator
torque to 5.6 Nm / 50 lb.in.
➛
➛
➛
Alternator-to-regulator
➛ Washer
harness receptacle
Regulator – “+14V” terminal
➛
Regulator – “AC” Terminal ➛ Regulator – “IGN” Terminal
Washer ➛
➛
Locknut, #10-24;
Washer
torque to 2.3 Nm / 20 lb.in. ➛
➛
➛
Nut, 1/4-20; torque to
2.8 Nm / 25 lb.in.
➛
2A
Boots (p/n N9464,
Vehicle harness ➛ 568
supplied in
envelope assembly)
FIGURE 2
C. E. Niehoff & Co. • 2021 Lee Street • Evanston, IL 60202 Tech Services Hotline 800-643-4633
Page 2 of 2 II0028D