Wet laid glass fibre tissue U 50 R is used to reinforce and support bituminous roofing materials. It has a high mechanical strength, is rot proof, dimensionally stable, chemically inert, and allows for uniform material impregnation without cracking or splitting. The glass mat has a nominal weight of 50 g/m2, is made of 13 micron glass fibers, and has a tensile strength of 210 N/50mm in the machine direction and 100 N/50mm in the cross direction. It is supplied in rolls that are 100 cm wide, up to 3350 m in length, with occasional splices marked and spaced along the roll.
Wet laid glass fibre tissue U 50 R is used to reinforce and support bituminous roofing materials. It has a high mechanical strength, is rot proof, dimensionally stable, chemically inert, and allows for uniform material impregnation without cracking or splitting. The glass mat has a nominal weight of 50 g/m2, is made of 13 micron glass fibers, and has a tensile strength of 210 N/50mm in the machine direction and 100 N/50mm in the cross direction. It is supplied in rolls that are 100 cm wide, up to 3350 m in length, with occasional splices marked and spaced along the roll.
Wet laid glass fibre tissue U 50 R is used to reinforce and support bituminous roofing materials. It has a high mechanical strength, is rot proof, dimensionally stable, chemically inert, and allows for uniform material impregnation without cracking or splitting. The glass mat has a nominal weight of 50 g/m2, is made of 13 micron glass fibers, and has a tensile strength of 210 N/50mm in the machine direction and 100 N/50mm in the cross direction. It is supplied in rolls that are 100 cm wide, up to 3350 m in length, with occasional splices marked and spaced along the roll.
General description Properties Wet laid glass fibre tissue U 50 R is used for the reinforcement and support of bituminous roof felts, membranes, used in both industrial and civil buildings. • high mechanical strength,
• absolute rot proof,
Technical characteristics • good dimensional stability, Characteristics Descriptions Units U 50 R • chemically inert and non-toxic, Weight (1) Nominal value g/m² 50 Binder (1) Type Modified • allow a uniform impregnation and urea are not subject to cracking, Max % ≤ 20.5 breaking and splitting, T° max. °C 200 Glass Fibre diameter (3) µ 13 • excellent resistance to UV light Hydrolytic Class Class 3 Tensile strength (1) Nominal value MD N/50mm 210 (MD = Machine direction) CMD N/50mm 100 (CMD = Cross machine direction) Minimum MD N/50mm 180 CMD N/50mm 90 Elongation at break Nominal value MD % 1.2-1.4 (MD = Machine direction) (CMD = Cross machine direction) CMD % 1.2-1.4 Standard dimensions (2) Width cm 100 Length m 3350 Core ∅ mm 152.4 Outer ∅ cm 120 Other Reinforcement --- Every 30 mm Colour --- White
(1) Guaranteed characteristics and provided a certificate of analysis upon request
(2) Other dimensions on request (3) Nominal value Tolerances : Edited by : Width : ± 3 mm for glass tissue with trimmed edges Saint-Gobain Vetrotex Glass Mat ± 12 mm for glass tissue with untrimmed edges 130, Avenue des Follaz Weight : ± 5% F-73009 Chambéry France Standard length rolls may contain one splice, properly marked and spaced. Tél : +33 (0) 4 79 96 84 02 Each lot (by lot is meant a full load - truck or container) will contain up to a maximum of 10% of Fax : +33 (0) 4 79 96 84 95 spliced rolls and/or rolls with length 30% less than the nominal value www.vetrotexglassmat.com
Saint-Gobain Vetrotex reserves the right to change the information given herein without prior notice (11/08/2004/5-8)