This document outlines general specifications for electrical works on a project. It includes sections on scope of work, applicable codes and standards, safety rules, work specifications, installation requirements, materials specifications, and field testing procedures. The specifications provide guidance on conduit layout, grounding, equipment installation, acceptable brands, and testing standards to ensure all electrical works are performed according to relevant codes and safety regulations. Signatories are required to approve and take responsibility for the electrical works.
This document outlines general specifications for electrical works on a project. It includes sections on scope of work, applicable codes and standards, safety rules, work specifications, installation requirements, materials specifications, and field testing procedures. The specifications provide guidance on conduit layout, grounding, equipment installation, acceptable brands, and testing standards to ensure all electrical works are performed according to relevant codes and safety regulations. Signatories are required to approve and take responsibility for the electrical works.
Original Description:
Original Title
Topic no. 4 General Specification for Electrical Works (1)
This document outlines general specifications for electrical works on a project. It includes sections on scope of work, applicable codes and standards, safety rules, work specifications, installation requirements, materials specifications, and field testing procedures. The specifications provide guidance on conduit layout, grounding, equipment installation, acceptable brands, and testing standards to ensure all electrical works are performed according to relevant codes and safety regulations. Signatories are required to approve and take responsibility for the electrical works.
This document outlines general specifications for electrical works on a project. It includes sections on scope of work, applicable codes and standards, safety rules, work specifications, installation requirements, materials specifications, and field testing procedures. The specifications provide guidance on conduit layout, grounding, equipment installation, acceptable brands, and testing standards to ensure all electrical works are performed according to relevant codes and safety regulations. Signatories are required to approve and take responsibility for the electrical works.
• PROJECT TITLE _____________ • OWNER __________________ • SIGNATORIES: President of the Company Professional Electrical Engineer CONTENTS 1. GENERAL 1.1 SCOPE OF WORK 1.2 APPLICABLE CODES 1.3 DOCUMENTATION 2. SAFETY RULES AND REGULATIONS 3. WORK SPECIFICATIONS / INSTALLATION / CONSTRUCTION 3.1 CONDUIT LAYOUT / INSTALLATION 3.2 INSTALLATION METHOD 4. MATERIALS SPECIFICATION AND/OR CONSTRUCTION 5. INSTALLATION REQUIREMENT 5.1 SYSTEM GROUNDING 6. MATERIAL DETAILED SPECIFICATIONS 6.1 CIRCUIT BREAKERS 6.2 CONDUCTOR 7. FIELD TESTING PROCEDURES AND STANDARDS TITLE BLOCK BELOW EVERY PAGE
GENERAL SPECIFICATION FOR ELECTRICAL WORKS
Eng’r. ROLANDO C. FABROS NAME OF PROJECT : INSTALLATION OF FIRE PUMP AND JOCKEY PUMP Professional Electrical Engineer ELECTRICAL SYSTEM Page 2 of 7 PRC License No. 2933 OWNER: RCFELENGR PHILIPPINES CORPORATION PTR No. 123456789 1263 J Balubad Road, Balubad 1, Silang, Cavite Dated No. 1-1-2021 1. GENERAL
1.1 Scope of Work
This specification and materials attached hereto covers the works necessary for the electrical works for ………… In general, the work will ……… 1.2 Applicable Codes and Standards The following codes and standards shall be applied ….. 1.2.1 PEC - Philippine Electrical Code 1.2.2 NEMA – National Electrical Manufacturers Association 2. SAFETY RULES AND REGULATIONS 2.1 All work and working conditions shall confirm to be established…. 2.2 All construction workers shall be required to wear proper PPE as… 3. WORK SPECIFICATION / INSTALLATION / CONSTRUCTION
3.1 CONDUIT LAYOUT / INSTALLATION
3.1.1 Locally manufactured pre-rigid metallic conduits, condulets, liquid-tight flexible metallic conduits, and accessory……. 3.1.2 Acceptable brands for imported conduits and condulets include: XXXXXXX 3.2 INSTALLATION METHODS 3.2.1 3.3 CABLE LAYING AND INSTALLATION 3.4 FABRICATION AND INSTALLATION OF EQUIPMENT PLATFORMS 4. MATERIALS SPECIFICATION AND/OR CONSTRUCTION 4.1 CONDUCTOR 4.2 CONDUIT 4.3 CIRCUIT BREAKER 4.4 PANEL 4.5 UTILITY BOX 5. INSTALLATION REQUIREMENTS 5.1 SYSTEM GROUNDING 5.1.1 Grounding conductors shall be laid at minimum depth of 18 inches below finished grade. 5.1.2. All grounding connections shall be ……… 5.2 EQUIPMENT GROUNDING 5.2.1 The following equipment shall be grounded: 5.2.1.1 Metal frames of electrical structure like transformer, disconnecting switches,………. 5.3 WIRING METHOD 6. FIELD TESTING PROCEDURE & STANDARDS The following tests shall be conducted as specified for each electrical equipment…………and shall be subject to review for completeness.
6.1 APPLICABLE TO POWER CABLES:
6.1.1 Physical Inspection to detect abrasion in surfaces. 6.1.2 Megger Test using 1 kilovolt set for 480 V circuit. END