Professional Documents
Culture Documents
DS-006-5-EN - Exertherm - IR Sensor Gain Matrix
DS-006-5-EN - Exertherm - IR Sensor Gain Matrix
Data Sheet
Product Overview
The IR.EM-06.SC sensor used for the continuous thermal which is detailed in the matrix table; two examples of its
monitoring of electrical components is calibrated to optimise use are shown below. When selecting the correct IR sensor
accuracy across a wide range of installation conditions. mounting distance from the bus, other issues such as
This is achieved via a gain factor (from the gain matrix), mechanical constraints within the enclosure and all local
which is configured into the Exertherm Datacard. and national regulations for clearance, relating to voltage,
To use the matrix, simply cross reference the two must be adhered to.
measurements to arrive at the correct ‘gain factor’
IR.EM-06.SC sensor
Example 1 Example 2
The Gain Matrix can be used to determine the minimum and A piece of switchgear has a busbar width of 10cm (4 inches)
maximum distance an IR sensor can be positioned from the and the required distance to mount a sensor is 20cm (7¾in).
target bus bar. As an example, on a 10cm width bus bar an Select the 10cm column on the top scale (busbar width),
IR sensor can be positioned a minimum distance of 4cm and then select the 20cm from the left scale (distance). Follow
a maximum distance of 32cm from the bus bar, this is these two values i.e. column and row to where they intersect.
identified in the vertical column of the 10cm bus. This identifies the correct gain factor 0.95.
INCHES ½ ¾ 1 1½ 2 2½ 2¾ 3 3½ 4 4½ 4¾ 5 5½ 5¾ 6¼ 6¾ 7 7½ 7¾
INCHES CM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
½ 1 0.88
¾ 2 0.95 0.83
2 5 1.00 0.88 0.84 0.84 0.81 0.80 0.78 0.78 0.77 0.76 0.71 0.78 0.78
2½ 6 0.91 0.88 0.84 0.82 0.82 0.79 0.79 0.78 0.78 0.73 0.78 0.78 0.77
2¾ 7 0.95 0.88 0.88 0.84 0.83 0.83 0.80 0.79 0.79 0.75 0.79 0.79 0.78 0.78 0.78
3 8 0.99 0.94 0.88 0.85 0.85 0.84 0.81 0.79 0.80 0.76 0.80 0.80 0.79 0.79 0.78 0.79 0.78
Mounting Distance
3½ 9 1.03 0.97 0.88 0.88 0.88 0.85 0.82 0.81 0.81 0.77 0.81 0.80 0.80 0.79 0.79 0.79 0.79 0.78
4 10 1.07 1.00 0.92 0.88 0.88 0.86 0.83 0.82 0.82 0.78 0.81 0.81 0.80 0.80 0.79 0.80 0.79 0.79
4½ 11 1.03 0.95 0.92 0.88 0.88 0.88 0.83 0.83 0.79 0.82 0.82 0.81 0.81 0.80 0.80 0.80 0.79
4¾ 12 1.06 0.97 0.94 0.91 0.88 0.88 0.84 0.84 0.80 0.83 0.83 0.82 0.81 0.80 0.81 0.80 0.80
5 13 1.09 1.00 0.96 0.93 0.88 0.88 0.88 0.86 0.81 0.84 0.83 0.82 0.82 0.81 0.81 0.81 0.80
5½ 14 1.02 0.98 0.94 0.91 0.88 0.88 0.88 0.84 0.85 0.84 0.83 0.83 0.82 0.82 0.81 0.81
5¾ 15 1.04 1.00 0.96 0.92 0.92 0.88 0.88 0.84 0.85 0.85 0.84 0.83 0.82 0.83 0.82 0.81
6¼ 16 1.07 1.02 0.98 0.94 0.93 0.88 0.88 0.88 0.86 0.86 0.84 0.84 0.83 0.83 0.82 0.82
6¾ 17 1.09 1.04 1.00 0.95 0.94 0.90 0.90 0.88 0.88 0.86 0.85 0.85 0.84 0.84 0.83 0.82
7 18 1.06 1.01 0.97 0.96 0.93 0.91 0.88 0.88 0.88 0.86 0.85 0.84 0.84 0.83 0.83
7½ 19 1.08 1.03 0.98 0.97 0.94 0.92 0.88 0.88 0.88 0.87 0.86 0.85 0.85 0.84 0.83
7¾ 20 1.08 1.05 1.00 0.98 0.95 0.93 0.91 0.90 0.88 0.88 0.87 0.85 0.86 0.85 0.84
8¼ 21 1.07 1.01 1.00 0.96 0.94 0.92 0.91 0.90 0.88 0.88 0.86 0.86 0.85 0.84
8¾ 22 1.08 1.03 1.01 0.97 0.95 0.93 0.91 0.90 0.88 0.88 0.88 0.88 0.86 0.85
9½ 24 1.04 1.04 1.00 0.97 0.95 0.93 0.92 0.90 0.88 0.88 0.88 0.88 0.86
10¼ 26 1.07 1.06 1.02 1.00 0.97 0.95 0.94 0.92 0.91 0.88 0.88 0.88 0.88
11 28 1.10 1.09 1.04 1.02 0.99 0.97 0.95 0.93 0.92 0.91 0.90 0.88 0.88
11¾ 30 1.07 1.04 1.01 0.99 0.97 0.95 0.94 0.92 0.92 0.90 0.88
12¾ 32 1.08 1.06 1.03 1.01 0.99 0.96 0.95 0.93 0.93 0.92 0.90
13¾ 34 1.09 1.05 1.02 1.00 0.98 0.97 0.95 0.94 0.93 0.91