Professional Documents
Culture Documents
Auto Bin Switch
Auto Bin Switch
www.commandalkon.com
© Command Alkon Incorporated 2003-2017. All rights reserved.
The contents of this document are for informational purposes only and are subject to
change without notice. Command Alkon Incorporated ("CAI") may, without notice, modify
its products in a way that affects the information contained in this publication.
CAI HEREBY DISCLAIMS ALL REPRESENTATIONS OR WARRANTIES EITHER EXPRESSED
OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF
MERCHANTABILITY, TITLE, NON-INFRINGEMENT, OR FITNESS FOR A PARTICULAR
PURPOSE. In no event will CAI be liable for any direct, indirect, or consequential damages
arising out of the use of, inability to use, or implementation of any information contained
in this publication, even if CAI has been advised of the possibility of such damages, or for
any claim by any other party.
The information contained herein is subject to change without notice and may contain
inaccuracies or errors. CAI assumes no responsibility for any errors that may appear in
this document. This publication is intended only for the direct benefit of authorized users
of CAI products. This publication may not be used for any purposes other than those for
which it is provided, and it is subject to the terms of the applicable software license or
subscription agreement. This publication and the information disclosed herein is the
property of CAI, and, except for rights granted by written consent, may not be disclosed,
disseminated, or duplicated in whole or in part.
2 12/20/16
Contents
Contents ........................................................................................ 3
Introduction .................................................................................. 4
Purpose ................................................................................................ 4
Audience ............................................................................................... 4
Revision Summary ................................................................................. 4
12/20/16 3
Introduction
Purpose
This document explains how to configure the system to automatically select
an alternate feed source without operator intervention when a feed timeout
occurs.
Audience
This guide is intended to be used by Command Alkon installation and service
personnel, as well as plant personnel specifically authorized to install and
configure COMMANDbatch.
Revision Summary
CMDbatch
Date Version Revision
Mar. 8, 2005 1.03 Document created.
Mar. 17, 2005 1.03 Final draft released for COMMANDbatch V1.03.
Mar. 8, 2007 1.06 Improved Notes, Tips, Cautions, and Warnings with
better icons and formatting.
Sept. 4, 2007 1.06 Formatting changes.
Oct. 14, 2008 Corrected this revision summary.
Nov. 18, 2008 1.7.5.0 Added a note about auto bin switching when two
bins are active.
Apr. 8, 2013 1.8.5.4 Added scale/metered feed setups to this document.
Jul. 17, 2015 1.9.0.0 Updated cover/title page.
Dec. 20, 2016 2017.1.0 Updated cover/title page.
4 12/20/16
Automatic Bin Switching
When Auto Bin Switching is enabled and a feed timeout occurs, the system
checks for an alternate source for the material. If an alternate source is
available, the remaining required material is fed from the alternate bin. Auto
Bin Switching can be set up so that no operator intervention is needed.
Note: In a 2-bin setup where both bins are active, Auto Bin Switching
allows feeding to switch to the second (or Fast Feed) bin if the
primary bin runs out of material.
Topics
Setting Up Auto Bin Switching
Operation of Auto Bin Switching
12/20/16 5
— (Scales): Enter a “Switch to Alt. Bin Below” flow rate and an “After
Delay” time.
— (Metered Feeds): Enter a “Switch to Alt. Source Below” flow rate and
an “After Delay” time.
Note: When the flow rate falls below the “Switch to Alt. Bin/Source
Below” rate for the number of seconds entered in the “After Delay”
field, the system switches to the alternate bin/source.
Note: In a 2-bin setup where both bins are active, Auto Bin Switching
allows feeding to switch to the second (or Fast Feed) bin if the
primary bin runs out of material.
6 12/20/16