Professional Documents
Culture Documents
Customer Special Characteristics
Customer Special Characteristics
Customer
Customer special
Customer name / part special
Nr.
Drawing
Control Plan
Process Flow
Relevant characteristic
SIS-P According to point 5.3.10 of the Hungarian
Magyar Suzuki ZRt (SPC dimension)
Assembling dimensions Measuring instrument Suzuki ZRT Supplier's Manual
2 (rear brackets Ο Those characteristics, whose non- Ο for weld car frames register Preliminary capability PPK> 1.67
YAA/YFA ) observance should be loss of product
PFMEA Long-term capability CPK> 1.33
function.
PSW
relevant measurement
and test report
Safety characteristic:
Fehrer Bohemia Defining characteristic of the component
Armrest cover in Műbőr és bőr égésgátoltságnak meg kell
Liberec (MFAI+, manufacturing process whose failure
4
MFAII, SK380 Armrest
D should be a potential personal injury, D imitation leather, leather, felelnie A DBL 5307.10.11.12 (FMVSS-302)
fabric szabvány előírásának
covers) accident, or fire hazard.
Critical characteristic:
Defining characteristic of the component VW 01106
CC manufacturing process whose failure D szabvány és
should be a potential personal injury, B21106-31 Toyo Seat szabvány szerint
Drawing
accident, or fire hazard. AUDI Q8 wire frames
Significant characteristic (SPC Control Plan plan
dimension) PFMEA According to SQR
Raw material inspection
SC Those characteristics, whose non- D instructions
Long-term capability
5 observance should be loss of product ≥ CPK 1,33
function Operation Instructions
Process Flow
Fehrer Hungária Kft Critical characteristic: Relevant test and
(wire frames) Defining characteristic of the component measurement reports Welding process
TLD 812 058
V1
manufacturing process whose failure D VW UP wire flames Welding seam length
should be a potential personal injury, welding strength
accident, or fire hazard.
Critical characteristic:
Defining characteristic of the component According to VW 01106
6 manufacturing process whose failure YFA hibrid wire flames standard and
should be a potential personal injury, B21106-31 Toyo Seat standard
accident, or fire hazard.
Critical characteristic:
Fehrer Automotive Defining characteristic of the component Welding process
7 GmbH manufacturing process whose failure D G23 welded items Welding seam length
(G23 welding) should be a potential personal injury, welding strength
accident, or fire hazard.
Critical characteristic:
Drawing
Defining characteristic of the component Welding process
Control Plan
manufacturing process whose failure Magna welded products Welding seam length
PFMEA
Magna should be a potential personal injury, welding strength
Raw material inspection
accident, or fire hazard.
8 (seat and backrest instructions
frames and brackets) Operation Instructions
Significant characteristic (SPC Process Flow
dimension) Relevant test and
Preliminary capability PPK> 1.67
Those characteristics, whose non- Magna products measurement reports
Long-term capability CPK> 1.33
observance should be loss of product
function
1
50MR23003-10-1 2022.11.21 Rába Rt.