Professional Documents
Culture Documents
MAT-0870 Rev 01 - Manually Operated Gate Valve DN50 PN16 For Sewerage Pumping Station's
MAT-0870 Rev 01 - Manually Operated Gate Valve DN50 PN16 For Sewerage Pumping Station's
Engineer Al Suweidi Engineering Consultant Bureau LLC Approx. Qty As per BOQ
Contractor Al Jaber Building LLC Submission Date 12-Nov-23
Signature 15 Others √
Please refer to the comments on the attached KN form ref. 1807-MAT-0870 Rev. 01 dated 16-11-2023
Magdi Gomaa
19/11/2023
16-11-2023
A- Approved C- Revised and resubmit
Employer/ Engineer Approval
B- Approved with comments D- Rejected
Note(1): Employer’s/ Engineer’s approval is for conformance with information given and design concept expressed in Contract Documents. Approval does not authorize changes to
Contract Documents. Employer’s/ Engineer’s approval does not relieve the Contractor from his contractual obligation to ensure conformance to all Contract Documents. Any deviations,
to the Contract Documents found subsequent to Employer’s/ Engineer’s approval are to be corrected by the Contractor at no extra Cost/Time to the Employer.
Rev. Stat
Item Docs Ref. Description Remarks
No. us
Manually Operated
54870-00SIT-ZZ-AJB-
1 Gate Valve DN50, B Please refer to the below
01
MEC-MAT-0870 comments.
PN16
1. Manually operated gate valve installation and quantity shall be as per approved shop drawings, BOQ and
ADSWSC specification.
2. Certificate of coating test (FBE 475-micron minimum Internal/External) and hydrostatic pressure test result from
manufacturing plant shall be provided upon material delivery on site
3. Identification of size, direction of flow, PN rating, manufacturer name and country of origin shall be mark on the
gate valve body.
4. Extension spindles shall be of SS 316L and shall be provided as per approved shop drawings.
5. Manufacturer warranty/guarantee shall be provided in compliance to ADSWSC standard and specifications.
6. Materials and components shall be stored, handled and installed in such a manner as to preserve their quality
and condition to standards required and in accordance with the manufacturer’s recommendation in compliance
with ADSWSC standard and specifications.
7. Certificate of country origin and bill of lading shall be provided along with the delivery of material on site
8. Final approval subject to authority acceptance.
Date: 16-11-2023
Page 1 of 1
STANDARD OPERATING FORM
Form. No. SOF-1301-B
□
[A] for Approved, subject to contract requirements
[B] for Approved as noted, resubmission not required
B [C] for Disapproved pending corrections, resubmission required
[D] for Rejected not to specifications
[E] for Returned as incomplete
Note: The above comments and / or approvals do not relieve the contractor from his obligation under the Contract to ensure conformance to the
specification. Any specification deviation found subsequent to approval shall be corrected by CONTRACTOR to the satisfaction of SWS.
THIS FORM IS REFERED IN PROJECTS EXECUTION PROCEDURE (SOP-1301) OF SWS’S INTEGRATED MANAGEMENT SYSTEM
Response to Comments for Gate Valve
Kindly use the latest ADSWS forms (Material submittal Attached latest submittal form and technical data
1
&Technical Data Sheets ) sheet
The Material size in the attached Shop Drawing (DN 80), Noted & Revised the shop drawing.The proposed material
size is DN50 which is additional requirement as per Surge
2 BOQ (DN 150), Material Data Sheets, and Technical analysis report. in contract Boq, there is no seperate item
Data Sheets (DN 50 ) do not match for DN50
Manually operated gate valve installation and quantity
Noted. The qty shall be as per approved shop
3 shall be as per approved shop drawings, BOQ and
drawings
ADSWS specification.
The material color and coating shall be as per the ADSWS
specification Section 15001 Table 14.11.1 (General
M&E Requirements and Section 15004 (Corrosion The colour coating is Blue colour , FBE coated to
4 Protection ), Certificate of coating test (FBE 475-micron 475 microns. Test certificates will be provided
minimum Internal/External) and hydrostatic pressure upon delivery.
test result from manufacturing plant shall be provided
upon material delivery on site
Identification of size, direction of flow, PN rating,
Size, direction of flow, PN rating , manufacturer
manufacturer name and country of origin shall be mark
5 name and country of origin will be marked on valve
on the
body.
gate valve body.
Engineer Al Suweidi Engineering Consultant Bureau LLC Approx. Qty As per BOQ
Contractor Al Jaber Building LLC Submission Date 12-Sep-23
Signature 15 Others √
Please refer to the attached KN Review form Ref. 1807-MAT-0870 Rev.00 dated 20-09-2023
Note(1): Employer’s/ Engineer’s approval is for conformance with information given and design concept expressed in Contract Documents. Approval does not authorize changes to
Contract Documents. Employer’s/ Engineer’s approval does not relieve the Contractor from his contractual obligation to ensure conformance to all Contract Documents. Any deviations,
to the Contract Documents found subsequent to Employer’s/ Engineer’s approval are to be corrected by the Contractor at no extra Cost/Time to the Employer.
Date 21/09/2023
Rev. Statu
Item Docs Ref. Description Remarks
No. s
Manually
54870-00SIT-ZZ-AJB- Operated Gate
1 00 C Please refer to the below comments.
MEC-MAT-0870 Valve DN50,
PN16
1. Kindly use the latest ADSWS forms (Material submittal &Technical Data Sheets )
2. The Material size in the attached Shop Drawing (DN 80), BOQ (DN 150), Material Data Sheets, and Technical
Data Sheets (DN 50 ) do not match
3. Manually operated gate valve installation and quantity shall be as per approved shop drawings, BOQ and
ADSWS specification.
4. The material color and coating shall be as per the ADSWS specification Section 15001 Table 14.11.1 (General
M&E Requirements and Section 15004 (Corrosion Protection ), Certificate of coating test (FBE 475-micron
minimum Internal/External) and hydrostatic pressure test result from manufacturing plant shall be provided
upon material delivery on site
5. Identification of size, direction of flow, PN rating, manufacturer name and country of origin shall be mark on the
gate valve body.
6. Extension spindles shall be of SS 316L and shall be provided as per approved shop drawings.
7. Manufacturer warranty/guarantee shall be provided in compliance to ADSWS standard and specifications.
8. Certificate of country origin and bill of lading shall be provided along with the delivery of material on site.
9. Materials and components shall be stored, handled and installed in such a manner as to preserve their quality
and condition to standards required and in accordance with the manufacturer’s recommendation in compliance
with ADSWS standard and specifications.
10. The manufacturer's, Certificate of Registration shall be renewed
11. Final approval subject to authority acceptance.
Page 1 of 2
Name: Magdi Gomaa
Date: 20-09-2023
Page 2 of 2
INDEX
A Compliance / Deviation form
B Relevant Catalogue / Brochure / Drawing (marked)
C.1 Manufacturer Quality Certificate (ISO or Other)
C.2 Copy of Relevant International Certificates N/A
D.1 Copy of Related Page of BOQ
D.2 Copy of Related Contract Specification
D.3 Copy of approved shop Drawing / Sketch
E. Relevant ITP Attached
F.1 Safety Data Sheets N/A
F.2 Material Data Sheets Attached
F.3 Technical Data Attached
G Applicator’s Method Statement Attached
H.1 Samples Provided N/A
H.2 Results Provided
I Other Enclosure (If any)
➢ ADSSC Vendor List
➢ Trade License
➢ Country of Origin
➢ Draft Warranty
➢ Previous Approvals
➢ Project Reference List
➢ Company Profile
➢ Reason for Alternative Brand
ADSSC Compliance Statement – Gate Valves
Where sluice valves above 350mm bore are Proposed Gate Valves are DN50. hence
d) mounted with the spindle in the horizontal plane, not applicable Not applicable
valve bodies shall be fitted with renewable
gunmetal machined gate slides and the gates with
renewable hard bronze shoes accurately
machined to reduce sliding friction.
Extension spindles shall be of grade 316L the
e) stainless steel and be compliant with the Extension spindles if supplied, will be SS316L We comply
specification for valve stems. They shall be of the
muff type and shall be drilled and provided with
a nut and bolt for securing the spindle to the
valve stem, which shall likewise be drilled to
accept the bolt. Spindles of length greater than
3m shall be supported with intermediate spindle
support bearings
Sluice valves for sewage applications shall be Proposed Gate Valves for sewerage
f) fitted with bronze wedge gates. application are with resilient seats as per We Comply.
clause c, Section 1.5
Dear Sir,
The letter is intended to clarify that the AVK 02/21 Model Gate Valve proposed for the project
is suitable to be used in sewage application and has been supplied for sewage projects in UAE.
AVK is also included in the latest SWS vendor list. All warranty obligations shall be on
manufacturer / Dutco Tennnat post installation, provided that the valves are stored, installed
and handled as per manufacturer recommendations.
Yours Sincerely,
Mohammed Shuaib
AVK gate valves are designed with built-in safety in every detail. The wedge is fully vulcanized with AVK’s own drinking water
approved EPDM rubber compound. It features an outstanding durability due to the ability of the rubber to regain its original
shape, the double bonding vulcanization process and the sturdy wedge design. The triple safety stem sealing system, the
high strength stem and the thorough corrosion protection safeguard the unmatched reliability.
Product description:
Flanged gate valve for drinking water and neutral liquids to max. 70°C
Standards:
· Designed according to EN 1074 part 1 & 2
· Face to face according to EN 558 Table 2 Basic Series 3
· Standard flange drilling to EN1092-2 (ISO 7005-2), PN 10/16
Test/Approvals:
· Hydraulic test according to EN 1074-1 and 2 / EN 12266
· Seat: 1.1 x PN (in bar), Body: 1.5 x PN (in bar). Operation torque test
Features:
· Fixed, integral wedge nut prevents vibration and ensures durability.
· The ductile iron core is fully vulcanized with drinking water approved EPDM rubber, no iron parts are exposed to the
medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber.
· Guides in the wedge and on the valve body ensure a uniform closure, safe operation ensured as the guides prevent
overloading of the stem.
· The wedge has a large through bore and as there are no hollows in the core, stagnant water or impurities can't collect
and cause contamination.
· Stainless steel stem with rolled threads for high strength.
· Full circle brass thrust collar provides fixation of the stem and low free running torques.
· Triple safety stem sealing with an NBR wiper ring, a polyamide bearing with four NBR O-rings, and an EPDM rubber
manchette which acts as the main hydraulic seal to the flow.
· Round bonnet gasket fixed in a recess groove in bonnet preventing it from being blown out by pressure surges.
· Countersunk and sealed bonnet bolts encircled by the bonnet gasket, thus there is no risk of corrosion.
· Full bore.
· Epoxy coating to DIN 30677-2, GSK approved.
Accessories:
Stem cap, handwheel, extension spindle, street cover, flange adaptor and combi-flange
The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.
Component list:
1
4. Bushing Polyamide
12
Components may be substituted with equivalent or higher class materials without prior notification.
The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.
持有证书: FM 84039
并运行符合 ISO 9001:2015 要求的质量管理体系,认证范围如下:
用于供水、污水处理、消防和供气的阀门及其附件的制造。
The manufacture of valves and accessories for water supply, sewage treatment, firefighting
and gas supply.
BSI代表:
Chris Cheung,亚太地区 合规风险主管
Page: 1 of 1
此证书以电子版本方式发放,所有权属BSI并受合同条款的约束。
可以 在线 查询电子证书的有效性
打印的证书可以通过网站 http://www.bsi-global.com/ClientDirectory或者致电 +86 10 8507 3000 查询。本证书信息亦可在国家认证认可监督管理委员会官方网站
(www.cnca.gov.cn) 上查询。
关于证书范围及 ISO 9001:2015 要求的适用性的进一步说明请咨询BSI。
获证组织必须定期接受监督审核并经审核合格此证书方继续有效。
此证书只在提供完整正本时才有效。
信息查询及联系方式:BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. 电话:+44 345 080 9000
BSI保证英国有限公司,注册地英国,注册号码7805321,地址:389 Chiswick High Road, London W4 4AL, UK
英标管理体系认证(北京)有限公司 北京市建国门外大街甲24号东海中心2008室 邮编:100004 电话:+86 10 85073000
BSI集团公司成员。
Jun Jun Lavado
27-10-2020
0508-Rev-04 21-10-2020
Series˄
˄㌫ࡇ˅ : ᡰᴹ䰰䰘㌫ࡇ All of valves
Manufacture˄
˄ࡦ䙐˅ AVK
Inspection tooling
Description of Activity Standard Inspection points Controlling Method Responsible Person Verifying Documents Non-conformity
Ự傼ᐕާ
⍫ࣘ᧿䘠 Ự傼ḷ߶ Ự傼ᇩ ᧗ࡦᯩ⌅ 䍓ԫӪ 䇠ᖅ ᔲᑨᡆнਸṬ༴⨶
In-coming cotrol
䘋ᯉ᧗ࡦ
1 / 2
03.747 (A/0)
Series˄
˄㌫ࡇ˅ : ᡰᴹ䰰䰘㌫ࡇ All of valves
Manufacture˄
˄ࡦ䙐˅ AVK
Thermometer, Scotch
cape, Surface
Temperature,
roughness test gauge,
ljWet Paint Work Cleaness, Roughness,
Wet Paint Thickness gauge, Inspector: 100% Inspection Process inspector ljSurface Wet Paint RecordNJ
InstructionNJ Thickness, Adhesion,
Adhesion test gauge,
Porosity test
High pressure porosity
test gauge
Appearance(cleaness,
porosity and so on),
Label, Product fixation
and protection Operator: 100% check quantity, Ensure tray label
ljPacking Work Hot waxing, Stem cap/ information is consistant with entity. Final inspector Refer to ljNon-Conformity
Packing Count, Caliper, Visual ljFinal Inspection recordNJ
Instruction NJ Hand wheel, CTC/CTO, Inspector: Barcode fit the entity and spray head, Operator Product Contorl ProcedureNJ
Pressure test report, Flange link size
Length, Flange hole
size, Stem end size,
Coating color and so on
Prepared byࡦ
ࡦᇊӪ: Vince Tao Approved byᢩ߶Ӫ: Kevin Xu
2 / 2
TECHNICAL DATASHEET‐GATE VALVE
PROJECT CONSTRUCTION OF 306 VILLAS AT AL SHAAD, AL AIN
CLIENT ABU DHABI HOUSING AUTHORITY (ADHA)
EMPLOYER ABU DHABI GENERAL SERVICES COMPANY PJSC TRADING AS MUSANADA
ENGINEER AL SUWEIDI ENGINEERING CONSULTANT BUREAU LLC
CONTRACTOR AL JABER BUILDING LLC
DOC.TITLE Technical Datasheet for Gate Valve
PRODUCT DESCRIPTION FLANGED GATE VALVE, PN16 Date:
MANUFACTURER AVK ANHUI, PRC August 23, 2023
1 General information
2.2 TYPE OF CONNECTION Standard Double Flange Connection Drilling to EN1092‐2 PN16
3 MATERIAL OF CONSTRUCTION
3.5 STEM SEALING (TRIPLE STEM SEALING) NBR Wiper ring, 2 NBR O‐Rings & EPDM Rubber manchette
4 SURFACE PROTECTION
FUSION BONDED EPOXY (FBE) COATING‐ INTERNAL AND
4.1 COATING
EXTERNAL COATING TO MIN 475 MICRONS THICKNESS
4.2 COLOR BLUE
5 OPERATION
TECHNICAL SPECIFICATIONS
1.0 Reference Standards
Specification Standard 1.01 BS EN BS EN 1563
1.02 Utilisation Category SEWAGE
1.03 CE - Marking (Y/N) N
2.0 Test Certificates
Certificate Nos. and 2.01 Works test UPON DELIVERY
Date of Issue 2.02 Site test UPON DELIVERY
2.03 Other UPON DELIVERY
3.0 Mechanical Data GATE VALVE
General
3.01 Valve reference number Model: 02/21
3.02 Valve location SEWAGE NETWORK
3.03 Mandatory supportive literature included (for all parts
i.e. valves, gearboxes, extension spindles etc)
YES
3.04 Valve body material Ductile Iron
3.05 Valve Gate/disc/plug material Ductile Iron Disc/ Gate, SS316L Stem
3.06 Nominal Diameter DN50
3.07 Working pressure 16 bar
3.08 Material of valve spindle SS316L
3.9 Velocity of flow at maximum duty (2.5m/sec Max) CONFIRMED
3.10 Handwheel closing - clockwise or anticlockwise CONFIRMED
3.11 Direction of closing marked on handwheel Y/N Y
3.12 Assisted Closure included i.e. Gearbox Y/N N
3.13 Required hand operating force (25kgf max) CONFIRMED
3.14 Valve actuator fitted Y/N N
3.15 Type of actuator (i.e. electric, pneumatic, hydraulic N/A
3.16 Test pressure 24 bar
3.17 Class of flanges BSEN 1092.2, PN16
3.18 Design temperature 60 deg C
3.19 Design, manufacture and testing standard BS 5150
3.20 Corrosion protection data sheet included. Y/N
Mandatory Compliance with General Specification Y
Clauses – Group C
Gate/sluice/knife gate valves GATE VALVE
3.21 Renewable wedge face rings fitted Y/N N
3.22 Material of wedge face rings Resilient seat
1. INTRODUCTION
AVK gate valves are designed for fully open or fully closed service installed in pipelines as isolating valves, and
should not be used as control or regulating valves. The valves can be used for installation in potable water,
wastewater, or neutral liquids depending on the specified application stated in the datasheet. Working conditions
must be limited by temperature and pressure as stated, normally between -20 and +70 °C, maximum 5 m/s flow
velocity and up to 16 bar differential pressure.
AVK gate valves may not be installed and used as anchor points, and should at all times be kept free from stress
arising from the pipeline or installation. The AVK gate valve is designed with a cast body and bonnet assembled
with countersunk bolts of stainless steel. It is operated with a stem of stainless steel and a wedge of ductile iron
fully vulcanized with rubber. Materials and coating vary according to the application of the valve. Full material
specifications are found in the datasheets. All valves are hydrostatically tested according to EN 12266.
Operation of the gate valve is performed doing an either clockwise to close (CTC) or clockwise to open (CTO)
rotating motion of the stem. When operating the valve stem the wedge moves up- or downwards on the
threaded part of the stem. AVK gate valves are designed to be self cleaning due to the full and straight bore. To
get the full benefit of this AVK recommends to install the valve in upright position or in a 45 degree angle. Upside
down installation is not recommended. Specific operation conditions may apply for valves equipped with an ISO
flange for mounting gearbox or actuator, please refer to the actuator manufacturer’s instructions.
As the gate valve is designed for installation directly in the ground, it is designed to be maintenance-free
throughout the expected life time of the valve. Thus spare parts are not needed and repair of the valve in case of
malfunction is not intended. To maintain full functionality of the valve throughout the expected life time frequent
operation of the valve is recommended. Depending on the media flowing through the valve, the frequency of
operation may vary from once a year to several times per month.
AVK gate valves for water and wastewater applications comply with the requirements in the machinery directive
2006/42/EC.
2. PRODUCT MARKING
2.1. NEW GENERATION OF GATE VALVES WITH ITEM NOS XX-XXX-XX-XXXXX9XX, AND SERIES 636
COPYRIGHT©AVK GROUP A/S 2017 - AVK INTERNATIONAL A/S, BIZONVEJ 1, DK-8464 GALTEN - WWW.AVKVALVES.EU MI GateValvesNew rev. H February 2017 GB
Page 1/4
INSTALLATION AND MAINTENANCE INSTRUCTIONS - ORIGINAL VERSION
AVK GATE VALVES FOR WATER AND WASTEWATER
01, 02, 06, 12, 15, 18, 20, 26, 32, 33, 36, 50, 55 and 636
Whenever AVK valves are installed or operated the inherent dangers of pressurized liquid and gas must be addressed. Never
attempt to dismantle the valves when the system is under pressure. Gate valves are heavy, especially in large dimensions,
so always use appropriate lifting devices to avoid injuries. It is essential that staff undertaking these operations is adequately
trained to avoid accidents. This installation and maintenance instruction will not replace adequate training and correct crafts-
manship and AVK will not be held responsible for any accidents arising from incorrect installation.
Likewise before, during and after installation the applicable standards, codes and regulations for installation and for the preven-
tion of accidents must be observed. Note that especially for installations in hazardous environments ATEX regulations may
apply.
4. STORAGE
AVK gate valves should be stored in a location that protects the valve from any pollution or contamination. The valves must be
stored in upright position and in an almost closed position to prevent long-term compression of the wedge rubber. The valve
must be kept out of sunlight to prevent oxidation of the rubber and coating. Valves stored in cold storage must be protected
against freezing. Series 36 gate valves with PE pipe connection have to be stored and handled carefully to avoid damage of the
pipe. According to EN12007-2 the storage time for PE pipes is maximum 2 years from the production date (printed on the pipe).
Therefore, the “first in, first out” principle is recommended.
5. INSTALLATION
AVK gate valves must be protected from damage during transportation, loading and handling. Lifting by means of a crane of
any other lifting device should only be done using the flange holes, lifting eyes or appropriate straps. Never suspend the valve
in a handwheel, gearbox or actuator.
Before installation a visual check must be performed. Special attention should be paid to checking the stem, valve seat area,
flanges and coating. Look for defects, bend or out of place parts, dents, scratches and other damages. Actions should be
taken to repair or replace the valves if any defects are detected.
AVK gate valves are supplied with a number of different connections to the pipeline. The use of flanges, sockets or spigot pipes
depend on customers’ specifications. For all connection types correct craftsmanship must be applied.
Gate valves with flanges must be installed using suitable gaskets, bolts, washers and nuts. Maiden flanges must be designed to
adapt standard flange drillings appropriate to the specific flange drilling on the valve.
Bolts must be tightening in a criss/cross pattern and bolt torques must be applied according to the flange gasket manufactu-
rer’s recommendations. Actions should be taken to ensure that the valve flanges are aligned to ensure an even pressure on the
gasket surface. See table 1 for bolt sizes.
Table 1 Figure 1
Bolt sizes
DN Working pressure (bar) Quantity
mm PN 10 PN 16 PN 10 PN 16
40 M16 M16 4 4
50 M16 M16 4 4
65 M16 M16 4 4
80 M16 M16 8 8
100 M16 M16 8 8
150 M20 M20 8 8
200 M20 M20 8 12
250 M20 M24 12 12
300 M20 M24 12 12
350 M24 M24 16 16
400 M24 M27 16 16
450 M24 M27 20 20
500 M24 M30 20 20
600 M27 M30 20 20
During installation in the pipeline system care must be taken to ensure that the connecting flanges of the pipeline getting in
contact with the gate valve are arranged parallel to each other and are exactly aligned to avoid any tension loads acting upon
the valve body. For the same reason, and to achieve a regular mounting of the flange sealings, it is also necessary to tighten the
connecting bolts regularly in a cross pattern (see figure 1). The bolt tightening torques are to be informed by the gasket supplier.
Gate valves with sockets must be installed according to pipe manufacturers’ recommendations. Check that the outside dia-
meter of the pipe corresponds to the inside diameter of the valve socket before installation. If gaskets are mounted in the valve,
secure that the gasket is placed correct and is adequately lubricated.
Gate valves with spigot pipe ends are to be installed either by means of appropriate welding or the use of a suitable coupling.
For welding procedures please refer to pipe manufacturers’ specifications. For choice of coupling please consult an AVK repre-
sentative.
For Supa Maxi™ gate valves series please also refer to separate mounting instruction for Supa Maxi™.
6. OPERATION
Gate valves are typically operated with an extension spindle in below ground installations. In manholes or in above ground
installations handwheels or electric actuators may be used. Ensure proper sizing of the handwheel and/or operating keys,
extension spindles and actuators. Please refer to AVK datasheets for further information. When installing gate valves mounted
with electric actuators, please observe closing torques and number of turns from the datasheet. When the valve is installed
in a chamber with an extension spindle going to above ground level, ensure that no vertical force from the extension spindle
presses down directly on the valve stem top. The extension spindle must be supported by wall mounts or similar to prevent
vertical forces and thereby supporting the weight of the extension spindle.
For gate valves in sizes larger than DN 350, installed in pipelines with a maximum flow acc. to EN1074-1 Table-2, and a dif-
ferential operating/test pressure exceeding 10 bars, the opening torque needed to release the wedge from the valve seat may
exceed the closing torques by around 30%. This should be taken in to account when installing and sizing the actuation of the
valve. Please contact AVK for further information regarding options/solutions to reduce or eliminate excessive opening torques.
Once the valve has reached its fully open position, it is recommended to turn the stem slightly towards the closing position in
order to release any stress on the stem thread.
When closing the gate valve ensure that the appropriate torque and number of turns are applied to the valve. See table 2.
Table 2
Max. torques Max. Torques – new generation of gate valves with item
nos xx-xxx-xx-xxxxx9xx, and series 636
Valve Valve
dimension Closing Free running Rupture Turns to dimension Closing Free running Rupture Turns to
DN torque torque torque open DN torque torque torque open
mm Nm Nm Nm mm Nm Nm Nm
40 40 6 400 11 40 25 3 250 12
50 40 6 400 11 50 25 3 250 12
65 60 6 400 14 65 25 3 250 17
80 60 6 400 17 80 35 3 400 17
100 80 6 400 21 100 35 3 400 21
125 80 6 500 26 125 40 3 500 26
150 80 12 600 26 150 40 3 600 26
200 120/1005) 12 800 33/355) 200 80 3 800 33
250 180 12 1000 37
300 200 16 1200 44
350 300 24 1400 59
400 300 24 1600 59/504)
450 3001)/4502)/5003) 25 1600 591)/392)/393)
500 3001)/4502)/5003) 25 1600 591)/432)/433)
600 5002)/7003) 25 3200 531)/522)/533)
800 850 60 1720 70
1) 4)
series 02 and 20 series 36
2) 5)
series 06 and 26 series 15
3)
series 55
NB: All values are theoretical, small variations may be found due to tolerances
7. PRESSURE TESTING
After installation, perform a pressure test before the trench is closed. Secure the pipe and gate valve against movement. If the
pipeline and valve are tested with water prior to gas/air tests, ensure that the pipeline and valve are drained to prevent frost
damage. AVK valves are designed to resist a test pressure of 1.5 x PN.
Gate valves designed with a replaceable stem sealing is part of the AVK product range. The stem sealing can be replaced
regardless of the position of the valve. If it is necessary to replace the stem sealing under pressure, the following procedure
must be followed:
1. Unscrew the stem seal nut in counterclock direction.
2. Take off the stem seal nut
3. Replace the stem seal nut unit including O-rings with a new one ordered from
AVK International.
4. Lubricate the nut threads with locking liquid medium strength.
5. Mount the new stem seal nut by tightening it firmly clockwise with a torque of
approx. 80 Nm.
This goes for gate valves up to DN 400. For larger dimensions please refer to sepa-
rate maintenance instruction.
Serial Nos.
S02DN50: 2601083117-3176 S02DN050: 2601083087-3116
S02DN100: 2601083017-3086
• Shell test: 24
Notes: MOC
Series 02
Control(Signature): Kevin
TAHAQAQ ﺗﺤﻘﻖ
www.added.gov.ae
www.tamm.abudhabi ﻟﻠﺘﺤﻘﻖ ﻣﻦ ﺻﺤﺔ ﺍﻟﺒﻴﺎﻧﺎﺕ ﺍﻟﻮﺍﺭﺩﺓ ﻓﻲ ﺍﻟﺮﺧﺼﺔ ﺑﺮﺟﺎﺀ ﺯﻳﺎﺭﺓ ﺍﻟﻤﻮﻗﻊ. ﺃﺑﻮﻇﺒﻲ- ﻭﺛﻴﻘﺔ ﻣﻌﺘﻤﺪﺓ ﻭﺻﺎﺩﺭﺓ ﺑﺪﻭﻥ ﺗﻮﻗﻴﻊ ﺃﻭ ﺧﺘﻢ ﻣﻦ ﺩﺍﺋﺮﺓ ﺍﻟﺘﻨﻤﻴﺔ ﺍﻹﻗﺘﺼﺎﺩﻳﺔ
Approved document issued without signature or stamp by the Department of Economic Development - Abu Dhabi. To verify the license kindly
visit www.tamm.abudhabi
Address : ﺍﺑﺮﺍﻫﻴﻢ ﻳﻮﺳﻒ ﻋﺒﺪ ﺍﻟﻠﻪ ﺣﺴﻦ, ﻣﺒﻨﻰ,~ : 0 ,3 ﺷﺮﻕ,ﺟﺰﻳﺮﺓ ﺍﺑﻮﻇﺒﻲ : ﺍﻟﻌﻨﻮﺍﻥ
TAHAQAQ ﺗﺤﻘﻖ
www.added.gov.ae
www.tamm.abudhabi ﻟﻠﺘﺤﻘﻖ ﻣﻦ ﺻﺤﺔ ﺍﻟﺒﻴﺎﻧﺎﺕ ﺍﻟﻮﺍﺭﺩﺓ ﻓﻲ ﺍﻟﺮﺧﺼﺔ ﺑﺮﺟﺎﺀ ﺯﻳﺎﺭﺓ ﺍﻟﻤﻮﻗﻊ. ﺃﺑﻮﻇﺒﻲ- ﻭﺛﻴﻘﺔ ﻣﻌﺘﻤﺪﺓ ﻭﺻﺎﺩﺭﺓ ﺑﺪﻭﻥ ﺗﻮﻗﻴﻊ ﺃﻭ ﺧﺘﻢ ﻣﻦ ﺩﺍﺋﺮﺓ ﺍﻟﺘﻨﻤﻴﺔ ﺍﻹﻗﺘﺼﺎﺩﻳﺔ
Approved document issued without signature or stamp by the Department of Economic Development - Abu Dhabi. To verify the license kindly
visit www.tamm.abudhabi
Ref: Date: August 24, 2023
WARRANTY CERTIFICATE
PROJECT : CONSTRUCTION OF 306 VILLAS AT AL SHAAD, AL AIN
We guarantee the workmanship of the valves and the material of the valves to be free
from defects. The guarantee is valid only if the materials are handled, installed, operated and
maintained as per manufacturer’s instructions. The warranty does not cover any external rusting,
paint chip off, routine ageing aspects, and other damages due to wrong handling.
Mohammed Shuaib
6XEPLWWDO)RU$SSURYDO2I0DWHULDOV
'DWH -DQXDU\
5HTXHVWQR /57;DQLF3:,5075HY
3URMHFW&RQWUDFW1R 0&65(03'0($
0DWHULDOGHVFULSWLRQ RQHLWHPRQO\RQWKLVIRUP
)/$1*('*$7(9$/9(31'1 *UHHQ&RORU
$UHDRIDSSOLFDWLRQ ,UULJDWLRQ:DWHU:RUNV
'HWDLOHG'HVLJQ1R/57;$1,&3:,5''/57; %LOO,55,*$7,211(7:25.&/$66.3LSHZRUN
'UDZLQJUHI $1,&3:,5'' %24UHIQR 0DQKROHVDQG3LSHZRUN$QFLOODULHV
6WRUPZDWHUDQG6XEVRLO'UDLQDJH 9ROXPH,9 7HFKQLFDO
%6(1%66HULHV
6SHFLILFDWLRQ5HI 6SHFLILFDWLRQV'LYLVLRQ6HFWLRQ,WHP 6WDQGDUGV
$WWDFKDOOUHOHYDQWWHFKQLFDOOLWHUDWXUHPDUNHGWRLGHQWLI\UHOHYDQWGHVFULSWLRQFXUUHQW7HVW&HUWLILFDWHVVDPSOHVDVDSSURSULDWH
0DQXIDFWXUHUVXSSOLHU
&RPSDQ\1DPH $9.$1+8,&+,1$
$GGUHVV :XMLDQJ,QGXVWU\SDUN+H[LDQ0DDQVKDQFLW\$QKXL3URYLQFH&KLQD
/RFDODJHQW '87&27(11$17//&$%8'+$%,8$(
'HOLYHU\
&RXQWU\RIRULJLQ &KLQD
$YDLODELOLW\
/RFDOO\0DQXIDFWXUHG 2YHUVHDV
:HFHUWLI\WKDWWKHDERYHVXEPLWWHGLWHPVKDYHEHHQUHYLHZHGLQGHWDLODQGDUHFRUUHFWDQGLQVWULFWFRQIRUPLW\ZLWKWKHFRQWUDFWGUDZLQJVDQGVSHFLILFDWLRQVH[FHSW
DVRWKHUZLVHVWDWHGDOVRWKDWWKHPDWHULDOVRXUFHVLQGLFDWHGDERYHKDYHEHHQUHYLHZHGLQGHWDLODQGWKDWWKH\ZLOOVXSSO\WKHVXEPLWWHGLWHPVLQFRQIRUPLW\ZLWKWKH
DERYHDQGGHOLYHUVDPHWLPHO\
(QJLQHHU V5HSUHVHQWDWLYHFRPPHQWV
&2'($ $SSURYHG 1R2EMHFWLRQ
&2'(% $SSURYHGDV1RWHG
&2'(& 5HYLVHG 5HVXEPLW
&2'(' 5HMHFWHG
&2'(( )RU,QIRUPDWLRQ
6DPSOH5HTXLUHG
7HVWV5HTXLUHG
$GGLWLRQDOLQIRUPDWLRQUHTXLUHG
1DPH6LJQDWXUH 'DWH
30/01/2023 0DQXIDFWXUHU VJXDUDQWHHUHTXLUHG
(PSOR\HU VFRPPHQWV
1DPH6LJQDWXUH 'DWH
$SSURYDOVKDOOQRWUHOLHYH&RQWUDFWRURIKLVOLDELOLWLHVXQGHUWKH&RQWUDFWRUFRQVWLWXWHDXWKRUL]DWLRQRIDQ\FKDQJHWR&RQWUDFW'RFXPHQWV
$'6)05(9
635&66 ) 5HY
ubmittal Comments heet
-----------------------------------------------------------------------------------------------------
Engineer
1 ro e om e o beA r e o
2 e e r be er e ro e o r
3 C / be ubm e or e re e
em rr o e or be e o er o A C e ro e om e o be
A A/A C e o
5 F ro ub e re e u or ro A /A C
F ro o e e N1 N 0 02/21 ree Co or m er or rr o er or
re ub e o e or om e e Co r o ume FC r
A re u reme r e e o r or om e o er eer re e
omme
Co r or o re ubm e o ume o e e e r e e e
re e ro e FC/ o r or ubm o o A or ro
Co r or o re er om e rem r me o e er A ro Form AF
er our e e r o Form F
Co r or o e o o m u urer om e e
10 ro ureme o m er ou e ro rom e A o r or u b e
11 F e e e o or be er A A ro
12 Co r or o e re u re m C e or e m er ubm ro o
13 e o r or o orm m er u e e re o m er u o e ure
e o o er e e re u re or e re -2 me
-----------------------------------------------------------------------------------------------------
Employer
I. Information
Stamp
V. For Consultant
Stamp
Resident Engineer Signature Date
VI. Received by Contractor
Stamp
ARC Representative Signature Date
Note: This Approval does not relieve the contractor from any of his contractual obligations
(This vendor list is being updated regularly by SMDD based on several factors like Quality, After-Sales Support, Others.. etc)
Govt. of Panama Chiriqui Dam (Esti.) PANAMA 2002 S857 - FREE DISCHARGE ( CONE) VALVE 30 (700)
Govt. of Panama Barrigon Dam (Esti.) PANAMA 2002 S857 - FREE DISCHARGE ( CONE) VALVE 18 (400)
AA ENGINEERING DOHA SOUTH STW QATAR 2002 S756 - BUTTERFLY VALVE 900MM
AA ENGINEERING DOHA SOUTH STW QATAR 2002 S756 - BUTTERFLY VALVE 800MM
AA ENGINEERING DOHA SOUTH STW QATAR 2002 S756 - BUTTERFLY VALVE 800MM
SATCO INTERNATIONAL DOHA SOUTH STW CP629 QATAR 2002 S54 - GATE ( SLUICE) VALVE 900MM
SATCO INTERNATIONAL DOHA SOUTH STW CP629 QATAR 2002 S54 - GATE ( SLUICE) VALVE 1000MM
SAUDI VALVES MANUFACTURING CO SAUDI ARABIA 2002 S54 - GATE ( SLUICE) VALVE 2" - 16"
Sydney Catchment Authority Woronora Dam SYDNEY 2002 S856 - SUBMERGED DISCHARGE VALVE 1100/800
Sydney Catchment Authority Woronora Dam SYDNEY 2002 S856 - SUBMERGED DISCHARGE VALVE 1000/800
AL NABOODAH ENGINEERING FESTIVAL CITY U.A.E 2002 S756 - BUTTERFLY VALVE 1200MM
AL NABOODAH ENGINEERING FESTIVAL CITY U.A.E 2002 S756 - BUTTERFLY VALVE 1400MM
AL NABOODAH ENGINEERING FESTIVAL CITY U.A.E 2002 S54 - GATE ( SLUICE) VALVE 1200MM
DUTCO TENNANT U.A.E 2002 S853 - CONTROL VALVE 600MM
DUTCO TENNANT U.A.E 2002 S853 - CONTROL VALVE 400MM
DUTCO TENNANT U.A.E 2002 S853 - CONTROL VALVE 300MM
DUTCO TENNANT U.A.E 2002 S853 - CONTROL VALVE 200MM
AL HAMED DEVELOPMENT & CONSTR. CONTRACT 43/44 U.A.E 2002 S853 - CONTROL VALVE 600MM
AL HAMED DEVELOPMENT & CONSTR. CONTRACT 43/44 U.A.E 2002 S853 - CONTROL VALVE 400MM
AL HAMED DEVELOPMENT & CONSTR. CONTRACT 43/44 U.A.E 2002 S853 - CONTROL VALVE 300MM
AL HAMED DEVELOPMENT & CONSTR. CONTRACT 43/44 U.A.E 2002 S853 - CONTROL VALVE 200MM
BIWATER HAYWOOD WATCHGATE UNITED UTILITIES UK 2002 S54 - GATE ( SLUICE) VALVE 96" (2440MM) (TWO UNITS)
MOGDEN / MORRISON
THAMES WATER UK 2002 S54 - GATE ( SLUICE) VALVE 1400MM - 1600MM
CONSTRUCTION
ASHWORTH FRASER UK 2002 S853 - CONTROL VALVE 80MM
TROUVAY & CAUVIN UK 2002 S853 - CONTROL VALVE 300MM
TROUVAY & CAUVIN UK 2002 S853 - CONTROL VALVE 200MM
TROUVAY & CAUVIN UK 2002 S853 - CONTROL VALVE 150MM
DUTCO TENNANT LLC U.A.E 2003 S41/ S641 - SWING CHECK VALVE 800MM C022846
AVK INTERNATIONAL IRAQ 2003 S41/ S641 - SWING CHECK VALVE 500, 600 & 700MM C022857
T.J. BRENT LIMITED UK 2003 S641 - RECOIL CHECK VALVE 600 C023115
A A ENGINEERING SERVICES QATAR 2003 S641 - RECOIL CHECK VALVE 500 C023138
AQUA GAS LIMITED (HOME) UK 2003 S641 - RECOIL CHECK VALVE 400 C023180
W T BURDENS LTD UK 2003 S641 - RECOIL CHECK VALVE 400 C023370
AQUA-GAS AVK PTY LTD BERRI VALVE UPGRADE AUSTRALIA 2003 S41/ S641 - SWING CHECK VALVE 450MM C023478
AQUA-GAS AVK PTY LTD BERRI VALVE UPGRADE AUSTRALIA 2003 S41/ S641 - SWING CHECK VALVE 500MM C023478
AQUA-GAS AVK PTY LTD BERRI VALVE UPGRADE AUSTRALIA 2003 S41/ S641 - SWING CHECK VALVE 700MM C023478
AQUA-GAS AVK PTY LTD BERRI VALVE UPGRADE AUSTRALIA 2003 S41/ S641 - SWING CHECK VALVE 800MM C023478
AQUA-GAS AVK PTY LTD BERRI VALVE UPGRADE AUSTRALIA 2003 S41/ S641 - SWING CHECK VALVE 900MM C023478
AQUA GAS LIMITED (HOME) UK 2003 S641 - RECOIL CHECK VALVE 500 C023599
HMB ALLIANCE UK 2003 S641 - RECOIL CHECK VALVE 500 C500032
SAINT GOBAIN PIPELINES CP 623 QATAR 2003 S41/ S641 - SWING CHECK VALVE 400MM C900103
AQUA-GAS AVK PTY LTD BERRI VALVE UPGRADE AUSTRALIA 2003 S54 - GATE ( SLUICE) VALVE 900MM
AQUA-GAS AVK PTY LTD BERRI VALVE UPGRADE AUSTRALIA 2003 S54 - GATE ( SLUICE) VALVE 750MM
AQUA-GAS AVK PTY LTD BERRI VALVE UPGRADE AUSTRALIA 2003 S54 - GATE ( SLUICE) VALVE 700MM
AQUA-GAS AVK PTY LTD BERRI VALVE UPGRADE AUSTRALIA 2003 S54 - GATE ( SLUICE) VALVE 900MM
AQUA-GAS AVK PTY LTD BERRI VALVE UPGRADE AUSTRALIA 2003 S54 - GATE ( SLUICE) VALVE 750MM
AQUA-GAS AVK PTY LTD BERRI VALVE UPGRADE AUSTRALIA 2003 S54 - GATE ( SLUICE) VALVE 700MM
AQUA-GAS AVK PTY LTD BURRUP PENINSULA AUSTRALIA 2003 S54 - GATE ( SLUICE) VALVE 1200MM
SATRIA DAMAI BRUNEI 2003 S54 - GATE ( SLUICE) VALVE 600MM
ONDEO DEGREMONT FRANCE 2003 S853 - CONTROL VALVE 150MM
ONDEO DEGREMONT FRANCE 2003 S853 - CONTROL VALVE 250MM
EAST AZERBAIJAN & ARDEBIL AYDOGMOOSH DAM IRAN 2003 S756 - BUTTERFLY VALVE 2000MM
EAST AZERBAIJAN & ARDEBIL AYDOGMOOSH DAM IRAN 2003 S756 - BUTTERFLY VALVE 1800MM
Government of Iran Aydogmoosh Dam IRAN 2003 S857 - FREE DISCHARGE ( CONE) VALVE 48 (1200)
Government of Iran Aydogmoosh Dam IRAN 2003 S857 - FREE DISCHARGE ( CONE) VALVE 18 (450)
700MM (920MM FACE TO
AVK INTERNATIONAL IRAQ 2003 S54 - GATE ( SLUICE) VALVE
FACE)
800MM (450MM FACE TO
AVK INTERNATIONAL IRAQ 2003 S54 - GATE ( SLUICE) VALVE
FACE)
MALAYSIA
Govt. of Malaysia Chereh Dam 2003 S857 - FREE DISCHARGE ( CONE) VALVE 48 (1200)
MALAYSIA
Govt. of Malaysia Chereh Dam 2003 S857 - FREE DISCHARGE ( CONE) VALVE 48 (1200)
MALAYSIA
Government of Malaysia Kelalong Dam 2003 S857 - FREE DISCHARGE ( CONE) VALVE 36 (900)
MALAYSIA
Government of Malaysia Sungai Kesang Dam 2003 S857 - FREE DISCHARGE ( CONE) VALVE 16 (400)
MALAYSIA
Government of Malaysia Sungai Muar 2003 S857 - FREE DISCHARGE ( CONE) VALVE 18 (450)
SATRIA DAMAI CHEREH DAM MALAYSIA 2003 S54 - GATE ( SLUICE) VALVE 1200MM
SINGARDO TRADING JURONG ISLAND MALAYSIA 2003 S54 - GATE ( SLUICE) VALVE 700MM
Government of Malaysia Sungai Muar MALAYSIA 2003 S856 - SUBMERGED DISCHARGE VALVE 450/300
AQUEDUCT RIO COLORADO,
URBACA SA DE CV MEXICO 2003 S54 - GATE ( SLUICE) VALVE 48" AWWA
TIJUANA, PART 2
AQUEDUCT RIO COLORADO,
URBACA SA DE CV MEXICO 2003 S54 - GATE ( SLUICE) VALVE 48" AWWA
TIJUANA, PART 2
AL HUDA ENGINEERING CP 633 QATAR 2003 S756 - BUTTERFLY VALVE 700MM
AL HUDA ENGINEERING CP 633 QATAR 2003 S756 - BUTTERFLY VALVE 800MM
AL HUDA ENGINEERING CP 633 QATAR 2003 S756 - BUTTERFLY VALVE 900MM
SAINT GOBAIN PIPELINES SALWA ROAD QATAR 2003 S54 - GATE ( SLUICE) VALVE 1200MM
SAINT GOBAIN PIPELINES SALWA ROAD QATAR 2003 S54 - GATE ( SLUICE) VALVE 900MM
SAINT GOBAIN PIPELINES CP 623 QATAR 2003 S54 - GATE ( SLUICE) VALVE 600MM
SAINT GOBAIN PIPELINES CP 623 QATAR 2003 S54 - GATE ( SLUICE) VALVE 600MM
SAINT GOBAIN PIPELINES CP 623 QATAR 2003 S54 - GATE ( SLUICE) VALVE 400MM
MARBU CONSTRUCTION CP 676 QATAR 2003 S54 - GATE ( SLUICE) VALVE 50MM - 200MM
AL HUDA ENGINEERING CP 633 QATAR 2003 S54 - GATE ( SLUICE) VALVE 700MM
Sydney Catchment Authority Woronora Dam SYDNEY 2003 S856 - SUBMERGED DISCHARGE VALVE 375/250
DUTCO TENNANT LLC U.A.E 2003 S54 - GATE ( SLUICE) VALVE 800MM
DUTCO TENNANT ADWEA U.A.E 2003 S853 - CONTROL VALVE 700MM
JOANNOU & PARASKEVAIDES U.A.E 2003 S853 - CONTROL VALVE 600MM
JOANNOU & PARASKEVAIDES U.A.E 2003 S853 - CONTROL VALVE 500MM
JOANNOU & PARASKEVAIDES U.A.E 2003 S853 - CONTROL VALVE 400MM
JOANNOU & PARASKEVAIDES U.A.E 2003 S853 - CONTROL VALVE 300MM
JOANNOU & PARASKEVAIDES U.A.E 2003 S853 - CONTROL VALVE 250MM
JOANNOU & PARASKEVAIDES U.A.E 2003 S853 - CONTROL VALVE 150MM
JOANNOU & PARASKEVAIDES U.A.E 2003 S853 - CONTROL VALVE 100MM
AQUA-GAS LTD TURKMENISTAN UK 2003 S54 - GATE ( SLUICE) VALVE 800MM
PRO 2 TRADING BRUNEI 2004 S641 - RECOIL CHECK VALVE 600 C023712
ADVANCE TRADING HK LTD HONG KONG 2004 S641 - RECOIL CHECK VALVE 150 C023776
M&G LTD IRELAND 2004 S855 - INLINE REGULATING VALVE 600MM x1 - PN16 C023824
AQUA-GAS AVK PTY LTD DOUGLAS MINE AUSTRALIA 2004 S41/ S641 - SWING CHECK VALVE 350MM C023848
Government of Iran Sanegerd Dam IRAN 2004 S856 - SUBMERGED DISCHARGE VALVE 800/600 C023877
W.T. BURDENS UK 2004 S641 - RECOIL CHECK VALVE 150 C900328
AQUAGAS UK UK 2004 S41/ S641 - SWING CHECK VALVE 7x 700Ø C900509
ARABI KUWAIT 2004 S853 - CONTROL VALVE 400MM CO-23812
SATRIA DAMAI MALAYSIA 2004 S641 - RECOIL CHECK VALVE 600 SO/0015
NORWEST HOLST LEIGH WWTW UK 2004 S41/ S641 - SWING CHECK VALVE 4x 600Ø SO/0034
HMB ALLIANCE CORNHOW WWTW UK 2004 S41/ S641 - SWING CHECK VALVE 3x 800Ø SO/0274
Snowy Hydro, Australia Jindabyne Dam AUSTRALIA 2004 S857 - FREE DISCHARGE ( CONE) VALVE 48 (1200) SO/0833
Snowy Hydro, Australia Jindabyne Dam AUSTRALIA 2004 S857 - FREE DISCHARGE ( CONE) VALVE 76 (1900) SO/0834
Government of Malaysia Sungai Kinta TW MALAYSIA 2004 S856 - SUBMERGED DISCHARGE VALVE 600/450 SO/445
Snowy Hydro, Australia Jindabyne Dam AUSTRALIA 2004 S856 - SUBMERGED DISCHARGE VALVE 800/600 SO/874
AVK AUSTRALIA SNOWY HYDRO AUSTRALIA 2004 S756 - BUTTERFLY VALVE 1600MM
AVK AUSTRALIA SNOWY HYDRO AUSTRALIA 2004 S756 - BUTTERFLY VALVE 2200MM
SHATIN SEWAGE TREATMENT
AQUA-GAS AVK LTD HONG KONG 2004 S54 - GATE ( SLUICE) VALVE 700MM
WORKS
SHATIN SEWAGE TREATMENT
AQUA-GAS AVK LTD HONG KONG 2004 S54 - GATE ( SLUICE) VALVE 800MM
WORKS
ARABI COMPANY WLL SUBIYA C3 KUWAIT 2004 S756 - BUTTERFLY VALVE 1200MM
ARABI COMPANY WLL SUBIYA C3 KUWAIT 2004 S756 - BUTTERFLY VALVE 1200MM
ARABI COMPANY WLL SUBIYA C3 KUWAIT 2004 S756 - BUTTERFLY VALVE 800MM
ARABI COMPANY WLL SUBIYA C3 KUWAIT 2004 S54 - GATE ( SLUICE) VALVE 200MM - 300MM
ARABI KUWAIT 2004 S853 - CONTROL VALVE 300MM
PIPEMATE SDN BHD SUNGAI KINTA DAM MALAYSIA 2004 S54 - GATE ( SLUICE) VALVE 1100MM
DOHA SOUTH PHASE 5 - CP
AA ENGINEERING QATAR 2004 S756 - BUTTERFLY VALVE 450MM
379/4
DOHA SOUTH PHASE 5 - CP
AA ENGINEERING SERVICES QATAR 2004 S54 - GATE ( SLUICE) VALVE 100MM - 400MM
379/4
ARABI COMPANY WLL SUBIYA C1 KUWAIT 2005 S756 - BUTTERFLY VALVE 800MM TO 2200MM SO/0033
ARABI COMPANY W.L.L. KUWAIT 2005 S855 - INLINE REGULATING VALVE 300MM x2 - PN16 SO/0033
ARABI COMPANY W.L.L. KUWAIT 2005 S855 - INLINE REGULATING VALVE 1000MM x5 - PN16 SO/0033
ARABI COMPANY W.L.L. KUWAIT 2005 S641 - RECOIL CHECK VALVE 800 & 1200Ø SO/0033
ARABI F6-2K2185 KUWAIT 2005 S853 - CONTROL VALVE 300Ø SO/0939
M.J. GLEESONS LOCH KATRINE SCOTLAND 2005 S54 - GATE ( SLUICE) VALVE 300 - 1600MM SO/1065
AQUAGAS UK UK 2005 S41/ S641 - SWING CHECK VALVE 2x 1000Ø SO/1068
SIMKISS CONTROL SYSTEMS UK 2005 S641 - RECOIL CHECK VALVE 450 SO/1088
DUTCO TENNANT L.L.C. U.A.E 2005 S855 - INLINE REGULATING VALVE 600MM x2 - PN16 SO/1173
ARABI F6-2K2271 KUWAIT 2005 S853 - CONTROL VALVE 300, 400 & 800Ø SO/1228
AVK HONG KONG NORTH POINT HONG KONG 2005 S54 - GATE ( SLUICE) VALVE 700 - 800MM SO/1236
150MM DOUBLE CLUSTER,
SORCOM REPLACEMENT VALVES FRANCE 2005 S851 - AIR VALVE SO/1348
200/250 TRIPLE CLUSTER
AVK OVERSEAS / URBACA RIO COLORADO / TIJUANA MEXICO 2005 S54 - GATE ( SLUICE) VALVE 24" AWWA SO/1376
Government of Iran Tangab Dam IRAN 2005 S856 - SUBMERGED DISCHARGE VALVE 1000/800 SO/1377
INTERNATIONAL PIPELINE PRODUCTS REPLACEMENT VALVES NORWAY 2005 S851 - AIR VALVE 150MM DOUBLE CLUSTER SO/1414
Government of Hong Kong Lower Shing Mun HONG KONG 2005 S856 - SUBMERGED DISCHARGE VALVE 1400/1200 SO/1471
Government of Iran Vanyar Dam IRAN 2005 S857 - FREE DISCHARGE ( CONE) VALVE 48 (1200)
UNITED UTILITIES MARTHOLME UK 2005 S54 - GATE ( SLUICE) VALVE 1200 - 1400MM
AVK VALVES CO. HONG KONG NORTH POINT HONG KONG 2006 S41/ S641 - SWING CHECK VALVE 2x 600Ø SO/1236
AVK AUSTRALIA CITY WEST WATER AUSTRALIA 2006 S54 - GATE ( SLUICE) VALVE 900MM SO/1314
AVK AUSTRALIA ROUSE HILL AUSTRALIA 2006 S54 - GATE ( SLUICE) VALVE 750MM SO/1390
CCIC RAS LAFFAN QATAR 2006 S756 - BUTTERFLY VALVE 800MM TO 1600MM SO/1418
C.C.I.C. RAS LAFFAN U.A.E 2006 S855 - INLINE REGULATING VALVE 900MM x3 - PN16 SO/1418
C.C.I.C. RAS LAFFAN U.A.E 2006 S855 - INLINE REGULATING VALVE 800MM x1 - PN16 SO/1418
ADVANCE TRADING SUI HO WAN PROJECT HONG KONG 2006 S41/ S641 - SWING CHECK VALVE 2x 600Ø SO/1500
AQUAGAS UK UK 2006 S641 - RECOIL CHECK VALVE 200 SO/1563
AMERICAN AVK WINDSOR UTILITIES CANADA 2006 S54 - GATE ( SLUICE) VALVE 60" AWWA SO/1576
ARABI COMPANY W.L.L. KUWAIT 2006 S855 - INLINE REGULATING VALVE 300MM x1 - PN16 SO/1615
ARABI COMPANY W.L.L. KUWAIT 2006 S641 - RECOIL CHECK VALVE 800Ø SO/1615
ARABI F6-2K2488 KUWAIT 2006 S853 - CONTROL VALVE 400Ø SO/1645
AVK PHILIPPINES CAGAYAN PHILIPPINES 2006 S641 - RECOIL CHECK VALVE 500 SO/1689
SEVERN TRENT UK 2006 S641 - RECOIL CHECK VALVE 400 SO/1693
AQUAGAS UK UK 2006 S641 - RECOIL CHECK VALVE 400 SO/1705
AQUAGAS UK UK 2006 S641 - RECOIL CHECK VALVE 400 SO/1708
SCOTTISH WATER - LOCH
AVK UK UK 2006 S756 - BUTTERFLY VALVE 1000MM TO 1400MM SO/1737
KATRINE
Government of Australia Goro Nickel Project AUSTRALIA 2006 S856 - SUBMERGED DISCHARGE VALVE 400/300 SO/1758
AVK VALVES SOUTH AFRICA SOUTH AFRICA 2006 S41/ S641 - SWING CHECK VALVE 4x 600Ø SO/1763
ARABI F6-2K2588 KUWAIT 2006 S853 - CONTROL VALVE 300Ø SO/1831
GLEESONS CONSTRUCTION SERV UK 2006 S641 - RECOIL CHECK VALVE 200 SO/1881
AVK UK LTD UK 2006 S855 - INLINE REGULATING VALVE 450MM x1 - PN16 SO/1906
GALLIFORD TRY COSTAIN UK 2006 S641 - RECOIL CHECK VALVE 400 SO/1925
KMI+GALLIFORD TRY COSTAIN JV UK 2006 S641 - RECOIL CHECK VALVE 800 SO/1958
ARABI F6-2K2654 KUWAIT 2006 S853 - CONTROL VALVE 300Ø SO/1980
AVK AUSTRALIA WYONG AUSTRALIA 2006 S54 - GATE ( SLUICE) VALVE 750MM SO/2032
Government of Ethiopia Koga Dam ETHIOPIA 2006 S856 - SUBMERGED DISCHARGE VALVE 450/400 SO/2129
PRO 2 TRADING BRUNEI 2006 S641 - RECOIL CHECK VALVE 600 SO/2347
AQUAGAS UK UK 2006 S41/ S641 - SWING CHECK VALVE 7x 600Ø SO/2394
Government of Australia Mooney Mooney Dam AUSTRALIA 2006 S856 - SUBMERGED DISCHARGE VALVE 400/300 SO/2432
BIWATER INTERNATIONAL HOME FOR EXPORT PROJECT UK 2006 S851 - AIR VALVE 200MM TRIPLE CLUSTER SO/2448
HBK CONTRACTING QATAR 2006 S641 - RECOIL CHECK VALVE 400 & 500 SO/2449
MALAYSIA
Government of Sarawak Gerugu Dam 2006 S857 - FREE DISCHARGE ( CONE) VALVE 600 SO/2604
SATRIA DAMAI BRUNEI PIPELINE BRUNEI 2006 S54 - GATE ( SLUICE) VALVE 700MM
ADVANCE TRADING H.K. AIRPORT HONG KONG 2006 S54 - GATE ( SLUICE) VALVE 600MM
Government of UAE Shobaisi Dam U.A.E 2006 S856 - SUBMERGED DISCHARGE VALVE 400/300
ARABI KUWAIT 2007 S853 - CONTROL VALVE 400Ø SO/1878
ARABI KUWAIT 2007 S853 - CONTROL VALVE 2x 600Ø SO/2318
AVK UK LTD UK 2007 S855 - INLINE REGULATING VALVE 400MM x1 - PN16 SO/2497
QATAR TECHICAL SUPPORT LUSAIL PROJECT UK 2007 S41/ S641 - SWING CHECK VALVE 2x 600Ø SO/2504
TORISHIMA QATAR 2007 S641 - RECOIL CHECK VALVE 500 SO/2505
NOORS ENGINEERING QATAR 2007 S855 - INLINE REGULATING VALVE 200MM x1 - PN16 SO/2507
AVK UK UK 2007 S641 - RECOIL CHECK VALVE 400 & 350 SO/2595
AVK INTERNATIONAL EUROPE 2007 S641 - RECOIL CHECK VALVE 400Ø SO/2614
AVK SAUDI HEPWORTH U.A.E 2007 S756 - BUTTERFLY VALVE 1200MM SO/2651
AVK AUSTRALIA MERRIMAC AUSTRALIA 2007 S54 - GATE ( SLUICE) VALVE 700 - 1000MM SO/2710
TORISHIMA QATAR 2007 S641 - RECOIL CHECK VALVE 500 SO/2811
AVK VALVES MALAYSIA SRI LANKA MALAYSIA 2007 S641 - RECOIL CHECK VALVE 500 SO/2831
AVK UK UK 2007 S641 - RECOIL CHECK VALVE 600 SO/2836
Government of Iran Gheighaj Dam IRAN 2007 S856 - SUBMERGED DISCHARGE VALVE 600/450 SO/2840
TORISHIMA QATAR 2007 S641 - RECOIL CHECK VALVE 500 SO/2843
AVK UK UK 2007 S641 - RECOIL CHECK VALVE 350 SO/2889
DUBLIN CITY - LISSENHALL TO
M&G REP OF IRELAND 2007 S756 - BUTTERFLY VALVE 1000MM SO/2918
JORDANSTOWN
NORTHUMBRIAN WATER -
AVK UK UK 2007 S756 - BUTTERFLY VALVE 1400MM SO/2919
HANNINGFIELD WTW
MITTELMANN GERMANY SEWAGE / WATER GERMANY 2007 S54 - GATE ( SLUICE) VALVE 800MM AND 1000MM SO/2933
AQUAGAS UK QATAR 2007 S41/ S641 - SWING CHECK VALVE 6x 700Ø SO/2974
YORKSHIRE WATER KNOSTROP UK 2007 S54 - GATE ( SLUICE) VALVE 450 - 1800MM SO/3021
Government of Australia Palmtree Creek AUSTRALIA 2007 S856 - SUBMERGED DISCHARGE VALVE 800/600 SO/3024
HBK CONTRACTING KAHRAMMA QATAR 2007 S855 - INLINE REGULATING VALVE 800MM x1 - PN16 SO/3047
DEGREMONT U.A.E 2007 S41/ S641 - SWING CHECK VALVE 2x 800Ø SO/3057
AVK UK UK 2007 S641 - RECOIL CHECK VALVE 400 SO/3116
AVK UK SOUTH EAST WATER - BRAY PS UK 2007 S756 - BUTTERFLY VALVE 1200MM SO/3185
AVK UK UK 2007 S641 - RECOIL CHECK VALVE 350 SO/3196
AVK AUSTRALIA AUSTRALIA 2007 S54 - GATE ( SLUICE) VALVE 1000MM
Government of Iran Gheighaj Dam IRAN 2007 S857 - FREE DISCHARGE ( CONE) VALVE 1000
MEKOROT DESALINATION PLANT ISRAEL 2008 S54 - GATE ( SLUICE) VALVE 1200MM SO/3015
AVK UK SEVERN TRENT - WANLIP STW UK 2008 S41/ S641 - SWING CHECK VALVE 3x 800Ø SO/3040
C.C.I.C. U.A.E 2008 S855 - INLINE REGULATING VALVE 600MM x1 - PN16 SO/3184
MEKOROT DESALINATION PLANT ISRAEL 2008 S54 - GATE ( SLUICE) VALVE 1600MM (7 UNITS) SO/3193 - 7
AVK UK UK 2008 S641 - RECOIL CHECK VALVE 700 SO/3241
AVK UK UK 2008 S641 - RECOIL CHECK VALVE 400 SO/3287
SEVERN TRENT WATER -
AVK UK UK 2008 S756 - BUTTERFLY VALVE 1600MM SO/3340
FRANKLEY WWTW
AVK UK UK 2008 S641 - RECOIL CHECK VALVE 350 & 700 SO/3340
AVK UK SOUTH EAST WATER - BRAY PS UK 2008 S756 - BUTTERFLY VALVE 1200MM SO/3356
AVK VALVES MALAYSIA KOBAT MALAYSIA 2008 S641 - RECOIL CHECK VALVE 800 SO/3396
AVK UK UK 2008 S641 - RECOIL CHECK VALVE 400 SO/3398
30", 48, 54, 60 & 72" AWWA
AVK OVERSEAS / URBACA RIO COLORADO / TIJUANA MEXICO 2008 S54 - GATE ( SLUICE) VALVE SO/3413
(28Valves)
DUTCO TENNANT L.L.C. U.A.E 2008 S855 - INLINE REGULATING VALVE 600MM x2 - PN16 SO/3466
THAMES WATER - HORNSLEY
AVK UK WTW UK 2008 S41/ S641 - SWING CHECK VALVE 3x 1000Ø SO/3473
SATRIA DAMAI MUDA RIVER MALAYSIA 2008 S641 - RECOIL CHECK VALVE 700 SO/3475
THAMES WATER - MOGDEN
AVK UK WTW UK 2008 S41/ S641 - SWING CHECK VALVE 3x 600Ø SO/3499
ARABI F6-2K3492 KUWAIT 2008 S853 - CONTROL VALVE 400Ø SO/3513
ARABI F6-2K3501 KUWAIT 2008 S853 - CONTROL VALVE 400Ø SO/3519
ARABI F6-2K3493 KUWAIT 2008 S853 - CONTROL VALVE 400Ø SO/3520
AVK AUSTRALIA SYDNEY DESALINATION AUSTRALIA 2008 S54 - GATE ( SLUICE) VALVE 1200MM SO/3626
AVK UK UK 2008 S641 - RECOIL CHECK VALVE 800 SO/3710
AVK SAUDI VALVES SAUDI ARABIA 2008 S41/ S641 - SWING CHECK VALVE 3x 600Ø SO/3722
AVK UK UK 2008 S641 - RECOIL CHECK VALVE 600 SO/3738
Sydney Catchment Authority Tallowa Dam SYDNEY 2008 600 SO/3792
S857 - FREE DISCHARGE ( CONE) VALVE
Melbourne Water Sugarloaf Reservoir AUSTRALIA 2008 S856 - SUBMERGED DISCHARGE VALVE 1000/800 SO/3862
Sydney Catchment Authority Cordeaux Dam AUSTRALIA 2008 200 SO/3881
S857 - FREE DISCHARGE ( CONE) VALVE
Sydney Catchment Authority Nepean Dam AUSTRALIA 2008 300 SO/3881
S857 - FREE DISCHARGE ( CONE) VALVE
Sydney Catchment Authority Broughtons pass Dam AUSTRALIA 2008 300 SO/3901
S857 - FREE DISCHARGE ( CONE) VALVE
OFFSHORE PRODUCTS LTD MEW KUWAIT 2008 S54 - GATE ( SLUICE) VALVE 800MM
1000MM, 800MM & 700MM (22
AA ENGINEERING SERVICES CP678, QATAR 2008 S54 - GATE ( SLUICE) VALVE
VALVES)
AVK UK DEVONPORT DOCKYARD UK 2008 S54 - GATE ( SLUICE) VALVE 1500MM
AVK UK KNOSTROP WWTW UK 2009 S41/ S641 - SWING CHECK VALVE 2x 800Ø SO/3505
AVK UK UK 2009 S641 - RECOIL CHECK VALVE 450 SO/3692
AVK UK UK 2009 S853 - CONTROL VALVE 350MM SO/3711
AVK MIDDLE EAST / DUTCO TENNENT U.A.E 2009 S756 - BUTTERFLY VALVE 1x 1800Ø SO/3750
AVK VALVES MALAYSIA SINGAPORE PROJECT MALAYSIA 2009 S641 - RECOIL CHECK VALVE 450 SO/3771
AA ENGINEERING CP678 - PS25 QATAR 2009 S41/ S641 - SWING CHECK VALVE 2x 800Ø SO/3788
M&G EMBANKMENT ROAD - DUBLIN IRELAND 2009 S756 - BUTTERFLY VALVE 4x 1200Ø SO/3791
LISSENHALL TO
M&G / SWORDS IRELAND 2009 S756 - BUTTERFLY VALVE 43x 800, 3x600Ø SO/3814
JORDANSTOWN
SATRIA DAMAI BATU HAMPAR MALAYSIA 2009 S641 - RECOIL CHECK VALVE 400 SO/3821
AVK UK UK 2009 S641 - RECOIL CHECK VALVE 1200 SO/3822
THAMES WATER -
AVK UK UK 2009 S756 - BUTTERFLY VALVE 8x 1400MM SO/3836
COPPERMILLS WTW
THAMES WATER -
AVK UK UK 2009 S54 - GATE ( SLUICE) VALVE 3 X DN1800MM , 1 X DN1000 SO/3836
COPPERMILLS
AVK UK UK 2009 S641 - RECOIL CHECK VALVE 350 SO/3861
BIWATER INTERNATIONAL ILORIN NIGERIA 2009 S641 - RECOIL CHECK VALVE 400 SO/3869
AVK UK UK 2009 S641 - RECOIL CHECK VALVE 350 SO/3880
AVK UK UK 2009 S641 - RECOIL CHECK VALVE 400 SO/3880
AVK UK UK 2009 S641 - RECOIL CHECK VALVE 450 & 500 SO/3915
Government of Malaysia Kargu Dam MALAYSIA 2009 S856 - SUBMERGED DISCHARGE VALVE 300/300 SO/3920
Government of Malaysia Kargu Dam MALAYSIA 2009 S856 - SUBMERGED DISCHARGE VALVE 1000/800 SO/3920
AVK UK ANGLIAN WATER - WING TW UK 2009 S756 - BUTTERFLY VALVE 2x800, 5x1000, 4x1000MM SO/3937
ARABI F6-2K4115 KUWAIT 2009 S853 - CONTROL VALVE 400Ø SO/3944
AVK UK THAMES WATER UK 2009 S756 - BUTTERFLY VALVE 1x 1400Ø SO/3948
AVK UK UK 2009 S641 - RECOIL CHECK VALVE 500 SO/3949
AVK VALVULAS do BRASIL SABESP STANDARD BRASIL 2009 S54 - GATE ( SLUICE) VALVE 2 X DN1000 SO/3966
N-POWER DOLCARROG POWER STATION UK 2009 S851 - AIR VALVE 200MM TRIPLE CLUSTER SO/3967
BIWATER INTERNATIONAL ABUJA WTW, NIGERIA NIGERIA 2009 S54 - GATE ( SLUICE) VALVE 8 X DN900 SO/3983
250MM QUADRUPLE
BIWATER INTERNATIONAL HOME FOR EXPORT PROJECT UK 2009 S851 - AIR VALVE SO/3983
CLUSTER
NORTHERN ALLIANCE,
AVK AUSTRALIA AUSTRALIA 2009 S54 - GATE ( SLUICE) VALVE 1000MM (12 UNITS) SO/4016
QUEENSLAND
AVK UK HONG KONG UK 2009 S641 - RECOIL CHECK VALVE 600 SO/4037
AVK ARMADAN POLAND 2009 S41/ S641 - SWING CHECK VALVE 2x 600Ø SO/4054
Alstom / EDF Rizzanese Dam, Corsica FRANCE 2009 S856 - SUBMERGED DISCHARGE VALVE 300/300 SO/4073
MORGAN EST COPPERMILLS UK 2009 S851 - AIR VALVE 200MM TRIPLE CLUSTER SO/4084
6 x 1600Ø, 5 x 1200Ø, 5 x
AVK UK EDINBURGH DRINKING WATER UK 2009 S54 - GATE ( SLUICE) VALVE SO/4137
1100Ø, 5 x 1000Ø
AVK UK EDINBURGH DRINKING WATER UK 2009 S641 - RECOIL CHECK VALVE 250, 350, 500 SO/4137
AVK AUSTRALIA ALKIMOS AUSTRALIA 2009 S54 - GATE ( SLUICE) VALVE 2 X DN1000 SO/4140
ARABI F6-2K4387 KUWAIT 2009 S853 - CONTROL VALVE 600mm SO/4150
AVK UK WOODGATE HILL UK 2009 S54 - GATE ( SLUICE) VALVE 1X DN1600 SO/4151
HBK CONTRACTING GTC 220 - 3749 QATAR 2009 S641 - RECOIL CHECK VALVE 500 SO/4208
AVK Philippines Angat dam - Manilla Water PHILIPPINES 2009 1200 SO/4209
S857 - FREE DISCHARGE ( CONE) VALVE
AVK Philippines Angat dam - Manilla Water PHILIPPINES 2009 1400 SO/4209
S857 - FREE DISCHARGE ( CONE) VALVE
ROOTS ENGINEERING TADMUR QATAR 2009 S641 - RECOIL CHECK VALVE 500,400,300,200,100 SO/4211
AVK Australia Mardi Dam AUSTRALIA 2009 600 SO/4225
S857 - FREE DISCHARGE ( CONE) VALVE
AVK MALAYSIA DOHA NORTH, ASHGHAL QATAR 2009 S641 - RECOIL CHECK VALVE 800, 900, 1000 SO/4262
AVK VALVULAS do BRASIL SABESP STANDARD BRASIL 2009 S54 - GATE ( SLUICE) VALVE 3 X DN1200 SO/4286
ARABI F6-2K4558 KUWAIT 2009 S853 - CONTROL VALVE 7 X 400mm SO/4291
AVK HONG KONG WAH SING HONG KONG 2009 S641 - RECOIL CHECK VALVE 700
AVK MIDDLE EAST HBK CONTRACTORS QATAR 2009 S54 - GATE ( SLUICE) VALVE 1200MM
UNITED UTILITIES,
AVK UK UK 2009 S54 - GATE ( SLUICE) VALVE 1400 & 1600MM
FLEETWOOD
AVK UK ANGLIAN WATER, WING WTW UK 2009 S54 - GATE ( SLUICE) VALVE 1000MM
ARABI F6-2K4387 KUWAIT 2010 S853 - CONTROL VALVE 1x 600Ø SO/4150
1x1400Ø, 1x1200Ø PARALLEL
MANILLA WATER ANGAT DAM PHILIPPINES 2010 S54 - GATE ( SLUICE) VALVE SO/4209
FACED
AVK MIDDLE EAST / ROOTS ENERGY DOHA CITY, QATAR QATAR 2010 S756 - BUTTERFLY VALVE 2x 900, 5x 800Ø SO/4211
AVK AUSTRALIA MARDI DAM AUSTRALIA 2010 S756 - BUTTERFLY VALVE 1x 1800Ø SO/4227
ARABI F6-2K4502 KUWAIT 2010 S853 - CONTROL VALVE 1x 400mm SO/4240
AVK UK / SEVERN TRENT BAMFORD UK 2010 S54 - GATE ( SLUICE) VALVE 13 X DN1200 SO/4273
33 @ (DN400, 900, 1000, 1600,
AVK FRANCE / ENTREPOSE DOHA PS70 - QATAR QATAR 2010 S54 - GATE ( SLUICE) VALVE SO/4302
1800)
AVK INTERNATIONAL MOZAMBIQUE AFRICA 2010 S54 - GATE ( SLUICE) VALVE 2 X DN1000 SO/4316
AVK UK / SEVERN TRENT BAMFORD UK 2010 S54 - GATE ( SLUICE) VALVE 2 X DN1200, 1 X DN1600 SO/4339
AVK FRANCE / ENTREPOSE DOHA PS70 - QATAR QATAR 2010 S54 - GATE ( SLUICE) VALVE 20x DN900 SO/4340
AVK Malaysia Sungai Teriang MALAYSIA 2010 600 SO/4342
S857 - FREE DISCHARGE ( CONE) VALVE
AVK Malaysia Sungai Teriang MALAYSIA 2010 1000 SO/4342
S857 - FREE DISCHARGE ( CONE) VALVE
AVK MALAYSIA SUNGAI TERIANG MALAYSIA 2010 S54 - GATE ( SLUICE) VALVE 1x1200, 2x1000Ø SO/4342
DOHA NORTH TSE3 PUMPING
MARUBENI QATAR 2010 S855 - INLINE REGULATING VALVE 1x 400Ø - PN16 SO/4353
STATION
AVK SAUDI VALVES KHROMA #6 SAUDI ARABIA 2010 S54 - GATE ( SLUICE) VALVE 3x 1000Ø SO/4355
AVK UK / ESSEX & SUFFOLK ABBERTON UK 2010 S54 - GATE ( SLUICE) VALVE 18 X DN1200 , 1 X DN1000 SO/4360
AVK UK CHERTSEY UK 2010 S54 - GATE ( SLUICE) VALVE 3 X DN1000 SO/4364
AVK UK / INTERSERVE BEAM RIVER/GORESBROOK UK 2010 S54 - GATE ( SLUICE) VALVE 3 X DN1000 SO/4372
AVK UK / INTERSERVE BEAM RIVER/GORESBROOK UK 2010 S54 - GATE ( SLUICE) VALVE 3 X DN1400 SO/4373
AVK MIDDLE EAST / ARABI KUWAIT 3659 KUWAIT 2010 S756 - BUTTERFLY VALVE 9x 800, 3x1000Ø SO/4386
ARABI F6-2K4830 KUWAIT 2010 S853 - CONTROL VALVE 1x 600Ø SO/4386
AVK UK MANCHESTER RINGMAIN UK 2010 S54 - GATE ( SLUICE) VALVE 2x 1400 SO/4427
AVK SAUDI VALVES ABUL JADAYEL SAUDI ARABIA 2010 S54 - GATE ( SLUICE) VALVE 3x 1000Ø SO/4428
AVK UK / THAMES WATER KEW UK 2010 S756 - BUTTERFLY VALVE 1x 1200Ø SO/4463
AVK UK Abberton Reservoir UK 2010 1200 SO4363
S857 - FREE DISCHARGE ( CONE) VALVE
AVK INTERNATIONAL TURKMENISTAN TURKMENISTAN 2010 S641 - RECOIL CHECK VALVE 1200
AVK UK ASHTON AVENUE SPS UK 2011 S641 - RECOIL CHECK VALVE 3x 1200 DIA. SO/4407
900MM x1 - PN16,
AVK VALVES SOUTH AFRICA CHELSEA / CONFLUENCE SOUTH AFRICA 2011 S855 - INLINE REGULATING VALVE SO/4408
600MM x1 - PN16
AVK UK UK 2011 S41/ S641 - SWING CHECK VALVE 1x 900Ø & 1x 1000Ø SO/4430
WATER SUPPLY DEPT -
AVK VALVES HONG KONG HONG KONG 2011 S54 - GATE ( SLUICE) VALVE 1x 1800Ø, 1x 1600Ø SO/4438
1/WSD/09E
American AVK Citrus Reservoir U.S.A 2011 S856 - SUBMERGED DISCHARGE VALVE 1000/800 SO/4439
American AVK Citrus Reservoir U.S.A 2011 S856 - SUBMERGED DISCHARGE VALVE 450/400 SO/4439
ARABI PAHW 1139 - MUSHRIF CO. KUWAIT 2011 S853 - CONTROL VALVE 1x 24" SO/4440
AVK UK UK 2011 S641 - RECOIL CHECK VALVE 3x 600 DIA. SO/4452
ARABI COMPANY WLL F6-2K5114 KUWAIT 2011 S54 - GATE ( SLUICE) VALVE 2x 400Ø SO/4460
AVK S.A. SOUTH AFRICA 2011 S641 - RECOIL CHECK VALVE 1x 400 DIA. SO/4461
AVK S.A. SOUTH AFRICA 2011 S641 - RECOIL CHECK VALVE 1x 400 DIA. SO/4461
AVK UK KEW UK 2011 S756 - BUTTERFLY VALVE 4x 900Ø SO/4476
ARABI RA147 - ABU FATEERA KUWAIT 2011 S853 - CONTROL VALVE 1x 16" SO/4479
AVK UK OLYMPIC SITE UK 2011 S54 - GATE ( SLUICE) VALVE 6x 1000Ø SO/4482
AVK UK COKERHILL RESERVOIR UK 2011 S41/ S641 - SWING CHECK VALVE 1x 450Ø SO/4510
AVK UK STOCK ORDER UK 2011 S54 - GATE ( SLUICE) VALVE 5x 1000Ø SO/4513
AVK AUSTRALIA / WATERCARE
HUNUA No4, AUCKLAND NEW ZEALAND 2011 S756 - BUTTERFLY VALVE 1x 800Ø SO/4514
SERVICES
AVK UK STOCK ORDER UK 2011 S54 - GATE ( SLUICE) VALVE 2x 1200Ø SO/4518
BIWATER INTERNATIONAL UK 2011 S41/ S641 - SWING CHECK VALVE 1x 600Ø & 1x 800Ø SO/4520
AVK UK UK 2011 S41/ S641 - SWING CHECK VALVE 3 x 400Ø SO/4522
AVK AUSTRALIA / SYDNEY WATER ROGANSHILL AUSTRALIA 2011 S641 - RECOIL CHECK VALVE 1x 1200 DIA. SO/4530
ACM Baghdad IRAQ 2011 S856 - SUBMERGED DISCHARGE VALVE 1000/800 SO/4535
ACM Baghdad IRAQ 2011 S856 - SUBMERGED DISCHARGE VALVE 800/600 SO/4535
ARABI COMPANY WLL F6-2K5344 KUWAIT 2011 S54 - GATE ( SLUICE) VALVE 7x 400Ø SO/4539
ARABI CO. W.L.L. KUWAIT RA186 KUWAIT 2011 S756 - BUTTERFLY VALVE 4x1000, 2x800, 2x600Ø SO/4544
AVK UK STOCK ORDER UK 2011 S54 - GATE ( SLUICE) VALVE 5x 1000Ø , 3x 1200Ø SO/4558
AVK UK YORKSHIRE WATER RESER. UK 2011 S54 - GATE ( SLUICE) VALVE 2x 400Ø TO YW SPEC SO/4569
AVK UK STOCK ORDER UK 2011 S54 - GATE ( SLUICE) VALVE 5x 1000Ø , 3x 1200Ø SO/4570
AVK AUSTRALIA / GHD AWOONGA DAM AUSTRALIA 2011 S756 - BUTTERFLY VALVE 1x 1400Ø SO/4571
6 x800Ø, 2 x1000Ø,
MOHAMMED FAKHROO BROS.W.L.L BAHRAIN BAHRAIN 2011 S756 - BUTTERFLY VALVE 20x1200Ø,14x1400Ø, SO/4573
30x1600Ø,
AVK MALAYSIA PAHANG STATE MALAYSIA 2011 S641 - RECOIL CHECK VALVE 5x 600 DIA. SO/4577
AVK UK PURTON UK 2011 S54 - GATE ( SLUICE) VALVE 2x 1000Ø SO/4581
AVK UK PURTON UK 2011 S41/ S641 - SWING CHECK VALVE 3x 800Ø SO/4581
BOUSTEAD SALCON WATER
AVK MALAYSIA SOLUTION SINGAPORE 2011 S641 - RECOIL CHECK VALVE 2x 450 DIA. SO/4585
HydroPlan Rannoch Dam UK 2011 200 SO/4593
S857 - FREE DISCHARGE ( CONE) VALVE
AVK UK GAILES SPS UK 2011 S641 - RECOIL CHECK VALVE 5x 700 DIA. SO/4607
AVK MALAYSIA SELANGOR MALAYSIA 2011 S641 - RECOIL CHECK VALVE 2x 450 DIA. SO/4620
VEOLIA WATER U.A.E 2011 S41/ S641 - SWING CHECK VALVE 3 x 500Ø SO/4621
AVK UK STOCK ORDER UK 2011 S54 - GATE ( SLUICE) VALVE 3x 1000Ø, 3x 1200Ø SO/4627
AVK UK UK 2011 S641 - RECOIL CHECK VALVE 4x 700 DIA., 4x 800 DIA. SO/4627
STOCK ORDER - VARIOUS
AVK UK PROJECTS UK 2011 S641 - RECOIL CHECK VALVE 2x 800, 8x 700 DIA SO/4627
AVK UK UK 2011 S641 - RECOIL CHECK VALVE 3x 350 DIA. SO/4646
AVK UK DIST ORDER UK 2011 S54 - GATE ( SLUICE) VALVE 4x 400Ø SO/4658
PETROSERV GTC303 QATAR 2011 S54 - GATE ( SLUICE) VALVE 4x 700Ø SO/4676
AVK FRANCE / ENTREPOSE DOHA PS70 - QATAR QATAR 2011 S54 - GATE ( SLUICE) VALVE 1x 900Ø SO/4691
AVK UK UK 2011 S641 - RECOIL CHECK VALVE 2x 100 DIA. SO/4694
MEKOROT WATER ISRAEL ISRAEL 2012 S54 - GATE ( SLUICE) VALVE 1x 1600Ø SO/4586
ARABI CO. W.L.L. NATIONAL KHARAFI MEW 1683 KUWAIT 2012 S756 - BUTTERFLY VALVE 12x 800Ø SO/4618
Sino Hydro, Brunei Ulu Tutong Dam BRUNEI 2012 S857 - FREE DISCHARGE ( CONE) VALVE 1200 SO/4670
AVK ARMADAN TYCHY PROJECT POLAND 2012 S756 - BUTTERFLY VALVE 3x 1400Ø SO/4673
STOCK ORDER - VARIOUS
AVK UK PROJECTS UK 2012 S641 - RECOIL CHECK VALVE 3x 600 DIA SO/4702
AVK UK STOCK ORDER UK 2012 S54 - GATE ( SLUICE) VALVE 1X 1400Ø SO/4703
INTERAPP ITALY ITALY 2012 S756 - BUTTERFLY VALVE 5x 1400Ø SO/4715
AVK UK STOCK ORDER UK 2012 S54 - GATE ( SLUICE) VALVE 1X 900Ø SO/4719
AVK INTERNATIONAL EUROPE 2012 S641 - RECOIL CHECK VALVE 5x 600 DIA SO/4721
AVK UK DIST ORDER UK 2012 S54 - GATE ( SLUICE) VALVE 1X 450Ø SO/4732
AVK UK DEEPHAMS UK 2012 S641 - RECOIL CHECK VALVE 7x 900 DIA, SO/4735
LARSEN & TOUBRO LIAVKED INDIA 2012 S641 - RECOIL CHECK VALVE 1x 500 DIA SO/4738
AVK UK STOCK ORDER UK 2012 S756 - BUTTERFLY VALVE 1x 900Ø SO/4741
AVK UK STOCK ORDER UK 2012 S54 - GATE ( SLUICE) VALVE 3x 1000Ø SO/4743
AVK UK PURTON UK 2012 S54 - GATE ( SLUICE) VALVE 1x 1400Ø SO/4753
AVK UK UK 2012 S641 - RECOIL CHECK VALVE 2x 700 DIA SO/4760
ARABI CO. W.L.L. KUWAIT RA186 KUWAIT 2012 S756 - BUTTERFLY VALVE 1x 1000Ø SO/4766
ARABI CO. W.L.L. KUWAIT RA186 KUWAIT 2012 S756 - BUTTERFLY VALVE 2x 1200Ø SO/4784
AVK SAUDI VALVES JUBAIL SAUDI ARABIA 2012 S54 - GATE ( SLUICE) VALVE 5x 1200Ø SO/4787
AVK SOUTH AFRICA PTY Ltd AFRICA 2012 S641 - RECOIL CHECK VALVE 1x 900 DIA. SO/4800
PETROGULF CP729 QATAR 2012 S54 - GATE ( SLUICE) VALVE 2x 400Ø , 5x 500Ø, 6x 600Ø SO/4805
AVK UK STOCK ORDER UK 2012 S54 - GATE ( SLUICE) VALVE 6x 1000Ø , 1x 1200Ø SO/4806
ARABI COMPANY WLL RA 162 KUWAIT 2012 S54 - GATE ( SLUICE) VALVE 2x 400Ø SO/4811
ARABI F6-2K5949 KUWAIT 2012 S853 - CONTROL VALVE 1x 16" SO/4811
95x 1200Ø, 35x 1600Ø,
ARABI CO. W.L.L. MEW #79 KUWAIT 2012 S756 - BUTTERFLY VALVE SO/4822
15x 2200Ø, 15x 2400Ø
350x 400Ø, 20x 500Ø, 180x
ARABI COMPANY WLL MEW79 KUWAIT 2012 S54 - GATE ( SLUICE) VALVE SO/4822
600Ø,
ARABI COMPANY W.L.L., MEW 79 KUWAIT 2012 S641 - RECOIL CHECK VALVE 2x 350 DIA, 12x 400 DIA, SO/4822
AVK UK STRATHCLYDE PARK RECOILS UK 2012 S641 - RECOIL CHECK VALVE 4x 350 DIA SO/4830
ARABI COMPANY WLL F6-2K6046 KUWAIT 2012 S54 - GATE ( SLUICE) VALVE 5x 400Ø , 18x 600Ø SO/4842
AVK UK STOCK ORDER UK 2012 S54 - GATE ( SLUICE) VALVE 2x 400Ø SO/4845
AVK UK UK 2012 S641 - RECOIL CHECK VALVE 1x 900 DIA, 7 x 350 DIA SO/4845
AL OBEIDLY STOCK ORDER QATAR 2012 S54 - GATE ( SLUICE) VALVE 2x 1200Ø SO/4857
AVK UK PURTON UK 2012 S54 - GATE ( SLUICE) VALVE 1x 1400Ø S&C SO/4864
AVK INTERNATIONAL EUROPE 2012 S641 - RECOIL CHECK VALVE 2x 800 DIA SO/4872
AVK ARMADEN ZMZ/ZZ/1284 POLAND 2012 S54 - GATE ( SLUICE) VALVE 3x 1000Ø SO/4886
Fred Olsen / Hydroplan Burnhead 2 SCOTLAND - UK 2012 S856 - SUBMERGED DISCHARGE VALVE 200/200 SO/4917
AVK UK UK 2012 S641 - RECOIL CHECK VALVE 1x 100 DIA SO/4940
INTER APP AG SWITZERLAND SWITZERLAND 2012 S641 - RECOIL CHECK VALVE 2x 500 DIA. SO/4944
PETROGULF SCADA PROJECT QATAR 2013 S756 - BUTTERFLY VALVE 1x 700Ø SO/4805
TOWELL ENGINEERING SEEB WILIYATH - PACKAGE 1 OMAN 2013 S756 - BUTTERFLY VALVE 22x 800Ø, 1x 1000Ø SO/4838
PETROSERV CP 729 QATAR 2013 S54 - GATE ( SLUICE) VALVE 7x 700Ø SO/4859
AVK Australia Onkaparinga Dam AUSTRALIA 2013 S856 - SUBMERGED DISCHARGE VALVE 400/250 SO/4860
TOWELL ENGINEERING SEEB WILIYATH - PACKAGE 2 OMAN 2013 S756 - BUTTERFLY VALVE 15x 800Ø , 1x 1000Ø SO/4930
AVK UK FRANKLEY PROJECT UK 2013 S641 - RECOIL CHECK VALVE 4x 400 DIA. SO/4943
AVK UK BRISTOL WATER UK 2013 S856 - SUBMERGED DISCHARGE VALVE 300/250 SO/4949
AVK UK UK 2013 S641 - RECOIL CHECK VALVE 2x 400 DIA. SO/4953
AVK UK KMI SOUTHPORT UK 2013 S641 - RECOIL CHECK VALVE 3x 450 DIA. SO/4955
AVK UK GOOLE CARR LANE UK 2013 S641 - RECOIL CHECK VALVE 1x 1200 DIA. SO/4956
AVK MALAYSIA SEMBAWANG MALAYSIA 2013 S641 - RECOIL CHECK VALVE 1x 800 DIA, 3 x 1200 DIA SO/4958
SEEB WILIYATH - ADDITIONAL
TOWELL ENGINEERING OMAN 2013 S756 - BUTTERFLY VALVE 2x 800Ø SO/4964
TO PACKAGE 1
AVK SAUDI VALVES AL YAMAMA SAUDI ARABIA 2013 S54 - GATE ( SLUICE) VALVE 2x 1400Ø SO/4966
SOLID GENERAL CONSTRUCTION AL KHOR QATAR 2013 S54 - GATE ( SLUICE) VALVE 6x 700Ø SO/4968
AVK FRANCE / ENTREPOSE ENTREPOSE FRANCE 2013 S54 - GATE ( SLUICE) VALVE 1x 900Ø SO/4973
AVK UK UK 2013 S54 - GATE ( SLUICE) VALVE 2x 1200Ø SO/4982
AVK UK WANLAP UK 2013 S54 - GATE ( SLUICE) VALVE 3x 1000Ø SO/4990
DUTCO TENNANT 700Ø PSV U.A.E 2013 S853 - CONTROL VALVE - 350Ø+ 1 x 700MM SO/5004
AVK MITTLEMAN ARMATUREN GMBH GERMANY 2013 S859 - CONTROL VALVE - 50Ø - 300Ø 1 X PRV FULL DN80 SO/5016
AVK MALAYSIA PANTAI MALAYSIA 2013 S641 - RECOIL CHECK VALVE 6x 800 DIA SO/5019
AVK FRANCE FRANCE 2013 S859 - CONTROL VALVE - 50Ø - 300Ø 1 X PRV FULL DN100 SO/5036
SEEB WILIYATH - ADDITIONAL
TOWELL ENGINEERING OMAN 2013 S756 - BUTTERFLY VALVE 1x 800Ø SO/5037
TO PACKAGE 2
AVK UK CLAY MILLS UK 2013 S54 - GATE ( SLUICE) VALVE 2x 1200Ø SO/5039
3 X PRV FULL DN50, 2 X PRV
FULL DN 80, 2 X PRV
2013 S859 - CONTROL VALVE - 50Ø - 300Ø FULL DN 100, 2 X PRV FULL SO/5053
DN 150, 2 X PRV FULL DN
200, 2 X PRV FULL DN 250,
AVK SOUTH AFRICA PTY Ltd PRV STOCK ORDER AFRICA
AVK UK NDC WILLOWBROOK UK 2013 S859 - CONTROL VALVE - 50Ø - 300Ø 3 X PRV FULL DN80 SO/5061
AVK UK OPTIMISE - A MAIN RESILIENCE 2013 S54 - GATE ( SLUICE) VALVE 1x 1200Ø SO/5065
UK
INDVA SVERIGE AB SWEDEN 2013 S859 - CONTROL VALVE - 50Ø - 300Ø 1 X PRV FULL DN100 SO/5072
AVK MALAYSIA BUKIT BARUN MALAYSIA 2013 S641 - RECOIL CHECK VALVE 2x 600 DIA. SO/5073
AVK UK NEWTON ON TRENT WTW UK 2013 S641 - RECOIL CHECK VALVE 1x 800 DIA SO/5074
AVK UK UK 2013 S859 - CONTROL VALVE - 50Ø - 300Ø 1 X PRV FULL DN80 SO/5076
AVK SAUDI VALVES SAUDI ARABIA 2013 S54 - GATE ( SLUICE) VALVE 1x 700Ø SO/5080
7 X PRV FULL DN80, 4 X PRV
DUTCO TENNANT LLC HH SHEIKH SAIF PALACE U.A.E 2013 S859 - CONTROL VALVE - 50Ø - 300Ø FULL DN150, 14 X PRV SO/5081
FULL DN65
Watercare, New Zealand Hunua No. 4 NEW ZEALAND 2013 S856 - SUBMERGED DISCHARGE VALVE 1000/800 SO/5082
BRICK & STEEL CONSTRUCTION CO CROSSHOUSE HOSPITAL UK 2013 S859 - CONTROL VALVE - 50Ø - 300Ø 1 X PRV RED DN80 SO/5089
AVK SOUTH AFRICA PTY Ltd AFRICA 2013 S859 - CONTROL VALVE - 50Ø - 300Ø 16 X PRV FULL DN100 SO/5092
3 X PRV FULL DN65, 3 X
PRV FULL DN80, 3 X PRV
AVK FRANCE CORSICA FRANCE 2013 S859 - CONTROL VALVE - 50Ø - 300Ø FULL DN100, 3 X PRV RED SO/5099
DN125, 3 X PRV FULL DN150,
3 X PRV FULL DN200,
AVK UK UK 2013 S859 - CONTROL VALVE - 50Ø - 300Ø 1 X PRV FULL DN80 SO/5104
AVK INDIA Wilson Dam INDIA 2013 S857 - FREE DISCHARGE ( CONE) VALVE 900 SO/5106
1 X PRV FULL DN100 1 X
2013 S859 - CONTROL VALVE - 50Ø - 300Ø SO/5107
AVK PHILIPPINES INC PHILIPPINES PSV FULL DN100
INDVA SWEDEN 2013 S641 - RECOIL CHECK VALVE 1x 600 DIA SO/5111
10 X PRV RED DN 80, 4 X PRV
RED DN 100, 11 X PRV RED
2013 S859 - CONTROL VALVE - 50Ø - 300Ø SO/5113
DN 150, 5 X PRV RED DN
AVK VALVES INDIA( P) LTD STOCK ORDER INDIA 200
AVK SAUDI VALVES MAN. CO LTD KHAFJI SAUDI ARABIA 2013 S859 - CONTROL VALVE - 50Ø - 300Ø 10 X PRV FULL DN80 SO/5128
EAGLE ELECTROMECHNAICAL CO. KHAMIS MUSHAIT U.A.E 2013 S756 - BUTTERFLY VALVE 3 X 1000Ø, 1 X 700Ø, 1 X 500Ø SO/5136
EAGLE ELECTROMECHANICAL CO L.L KHAMIS MUSHAIT U.A.E 2013 S54 - GATE ( SLUICE) VALVE 1x 700Ø , 1x 1000Ø SO/5136
EAGLE ELECTROMECHANICAL CO L.L. KHAMIS MUSHAIT U.A.E 2013 S641 - RECOIL CHECK VALVE 1x 700 DIA SO/5136
AVK UK UK 2013 S54 - GATE ( SLUICE) VALVE 1x 1200Ø SO/5143
AVK UK BRISTOL WATER UK 2013 S859 - CONTROL VALVE - 50Ø - 300Ø 1 X PRV RED DN 80, SO/5144
AVK UK JWB SERVICES LTD UK 2013 S859 - CONTROL VALVE - 50Ø - 300Ø 1 X PRV FULL DN100 SO/5149
CONSOLIDATED CONTRACTS DUKHAN LINE QATAR 2013 S756 - BUTTERFLY VALVE 6 X 1400Ø SO/5169
1 X PSV FULL DN100, 3 X
UK 2013 S859 - CONTROL VALVE - 50Ø - 300Ø SO/5171
INVICTA VALVES LIMITED WESTWOOD W.T.W PSV FULL DN80
AVK FRANCE S A FRANCE 2013 S859 - CONTROL VALVE - 50Ø - 300Ø 3 X PRV FULL DN65 SO/5180
AVK MALAYSIA SEMENYIH MALAYSIA 2014 S54 - GATE ( SLUICE) VALVE 4x 900Ø SO/5118
AVK MALAYSIA PUTRAJAYA MALAYSIA 2014 S641 - RECOIL CHECK VALVE 6x 700 DIA, 13x1000 DIA, SO/5119
AVK INTERNATIONAL A/S ICELAND EUROPE 2014 S859 - CONTROL VALVE - 50Ø - 300Ø 2 X PRV RED DN 150, SO/5181
2 X PRV RED DN 300, 1 X PSV
S859 - CONTROL VALVE - 50Ø - 300Ø SO/5191
INDVA SVERIGE AB SWEDEN 2014 FULL DN50
CLANCY DOCWRA (SOUTH
AVK UK UK S859 - CONTROL VALVE - 50Ø - 300Ø SO/5195
WATER) 2014 3 X PSV FULL DN200
ARABI AZZOUR KUWAIT 2014 S641 - RECOIL CHECK VALVE 3 X 600Ø SO/5200
ARABI AZZOUR KUWAIT 2014 S41/ S641 - SWING CHECK VALVE 8 X 1000Ø SO/5200
AVK SAUDI VALVES MADINA SAUDI ARABIA 2014 S756 - BUTTERFLY VALVE 1 X 1400Ø, 1 X 900Ø, 1 X 600Ø SO/5206
INDVA SVERIGE AB SWEDEN 2014 S859 - CONTROL VALVE - 50Ø - 300Ø 1 X PRV FULL DN50 SO/5223
OUR BRAND
YOUR SOLUTION
Table of Contents
Mission and Core Values
About Us
Sectors
Water and Sewerage Networks
Water and Waste Water Treatment
District Cooling
Buildings and MEP Works
Civil Infrastructure
Landscaping and Irrigation
Land Survey
Seaports, Airports and Railways
Quality & Conformity Laboratories
Research and Development Laboratories
Vocational & Training Workshops
Low Voltage System Applications
Sport and Leisure
Hospitality Industry
Telecommunication Industry
Oil and Gas Industry
Power & Electrical Networks
E-Business
Our Mission
We are dedicated to provide world class solutions to our customers to fulfill their diverse needs through
a team of experienced and qualified professionals who are recognized for what they do. We are a tech-
nology management company with a futuristic outlook and a keen desire to learn and change with the
times. Our commitment to the customer is of prime importance to us in building enduring relationships
with them.
-DGDZHO7UDGLQJ(VW
32%R[
0DQDPD
7HO
)D[
16/08/2023
The letter is intended to inform that the Belgicast Gate Valve model approved as per the submittal
54870-00SIT-ZZ-AJB-MEC-MAT-0787 is not available in the market and the lead time for is more
than 16 weeks, the size being a non-regular size. The temporary valves supplied to site, AVK
complies to the authority specification and is also form ADSSC Vendor list. Considering the present
market availability of Belgicast, we kindly request you to accept the temporary valves provided. We
can submit all relevant documents to obtain the necessary approval. Latest ADSSC Vendor list
enclosed