Professional Documents
Culture Documents
175-030100 - Stokiest - Saep 347
175-030100 - Stokiest - Saep 347
0070 R X Mechanical/Chemical and Non-Destructive Testing Reports (as Original Manufactures Certificates to be reviewed and stamped
per P.O. requirements) as original copies to be provided to Buyer Representative.
0080 R X Review of inspection reports for the Inspection conducted at As per SAEP-347 paragraph 6.4.1
manufacturer's facility
0090 R X Quality and MTC verification of the supplied material by As per SAEP-347 paragraph 6.4.3
representative sample testing
0100 R X Stockist Inspection Report and Certificate of compliance Stockist shall accept materials prior to Buyer Representative
Inspection.
0120 W R X Perform Charpy Impact Test (CVN) For low temperature pipes and as applicable in SAEP-347.
0130 H R X Marking & Visual and dimensional Inspection As per SAEP-347 and P.O. requirements.
IR030100 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 09/04/2018 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 11/01/2016 IR030100 2 of 2
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0140 W R X Coating As per P.O. requirements.
Notes:
(1) Refer to detailed instruction sheet 175 - 000003 of Inspection and testing requirements for ideal use of this form.
(2) Verify stockist direct purchase from an approved manufacturer during the time of placing the PO. All applicable Saudi Aramco standards,
materials specifications and inspection requirements, along with the applicable international requirements, are attached in the PO.
(3) Contractors and equipment manufacturers shall verify the approval status as specified in SAEP-347.
(4) Stockist shall directly procure material from approved manufacturers only, and not from other stockist, agents, or traders.
(5) Stockists are required to confirm the approval status of manufacturers prior to purchasing any material.
End of IR030100