Professional Documents
Culture Documents
Acero Certificado ABS
Acero Certificado ABS
AUSTRALIA
AUSTRIA
BELGIUM
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 1 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
BELGIUM
BRAZIL
D 35mm IC & CC
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 2 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
BRAZIL
BULGARIA
CANADA
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 3 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
CZECH REPUBLIC
DENMARK
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 4 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
DENMARK
FINLAND
AQ/DQ/EQ47 65mm CC
AQ/DQ/EQ51 40mm CC
AQ/DQ/EQ47 20mm CC
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 5 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
FINLAND
FRANCE
GERMANY
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 6 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
GERMANY
E 51mm IC & CC
Ingots & Slabs from ABS approved sources.
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 7 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
GERMANY
HUNGARY
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 8 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
INDIA
INDONESIA
B 25mm CC
Slabs from ABS approved source.
ITALY
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 9 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
ITALY
JAPAN
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 10 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
AH36,DH36 25mm CC
**Differential Thickness Plate, 6mm maximum difference.
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 11 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 12 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
V039,VH039 42mm IC
V051,VH051 42mm IC
V060,VH060 42mm IC
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 13 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 14 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 15 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
Shapes A 25mm CC
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 16 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 17 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 18 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
AB/DH36 100mm CC
* Controlled Hot Rolling & "Temper"
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 19 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
AH32 51mm CC
*Longitudinally tapered plate, 12mm maximum thickness
difference.
D 35mm CC
*Longitudinally tapered plate, 12mm maximum thickness
difference.
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 20 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 21 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
B,D 25mm CC
From NKK Fukuyama Works
All 51mm CC
Slabs from NKK Keihin
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 22 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
AH/DH/EH/FH4 80mm CC
AH/DH/EH40Z 51mm CC
AH32Z,AH36Z 35mm CC
AH40,DH40,EH 51mm CC
DH32Z, 25mm CC
DH36Z
Slabs from NKK Keihin
EH32Z, 51mm CC
EH36Z
Plates(CR AH40,DH40 40mm CC
w/OLAC)
Slabs from NKK Keihin
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 23 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
HITEN 20mm CC
54A,54D
Slabs from NKK Keihin
V051,VH051 42mm CC
HITEN 20mm CC
54E,EH40
Slabs from NKK Keihin
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 24 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
V060,VH060 18mm CC
VO51,VH051 18mm CC
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 25 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
E 18mm CC
Shapes(NCT-TypeAH40,DH40,EH 18mm CC
B)
Slabs from NKK Keihin
HiTen 54 A, D, 18mm CC
E
Slabs from NKK Keihin.
AH 12mm CC
Slabs from Kansai
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 26 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
AH 38mm IC & CC
Billets & Ingots from Nippon Steel Sakai Works
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 27 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 28 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 29 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 30 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
JAPAN
LUXEMBOURG
MACEDONIA
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 31 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
MEXICO
NETHERLANDS
NORWAY
AH/DH/EH36 50mm CC
Slabs from ABS approved source.
AH/DH/EH40 50mm CC
Slabs from ABS approved source.
AQ/DQ/EQ43 50mm CC
Slabs from ABS approved source.
AQ/DQ/EQ47 20mm CC
Slabs from ABS approved source.
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 32 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
NORWAY
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 33 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 34 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
A, B 22mm CC
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 35 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 36 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 37 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
PHILIPPINES
POLAND
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 38 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
POLAND
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 39 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
POLAND
ROMANIA
RUSSIA
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 40 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
RUSSIA
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 41 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
RUSSIA
SLOVAKIA
SOUTH AFRICA
SOUTH KOREA
304L 80mm CC
Slabs from ABS approved source.
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 42 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
SOUTH KOREA
316L 80mm CC
Slabs from ABS approved source.
316LN 80mm CC
Slabs from ABS approved source.
A,B 50mm CC
AH32 35mm CC
Slabs from ABS approved source.
D 35mm CC
Slabs from ABS approved source.
DH32 25mm CC
Slabs from ABS approved source.
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 43 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
SOUTH KOREA
(hot rolled)
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 44 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
SOUTH KOREA
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 45 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
SOUTH KOREA
SPAIN
SWEDEN
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 46 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
SWEDEN
THAILAND
TURKEY
U.S.A.
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 47 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
U.S.A.
AH 1-1/2" CC
ISO-ABS QE for ISO 9002
B 1-1/2" CC
ISO-ABS QE for ISO 9002
D 1-3/8" CC
ISO-ABS QE for ISO 9002
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 48 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
U.S.A.
AH,DH 1/2" CC
Slabs from ABS approved sources. ISO-ABS QE for ISO 9002.
D 1/2" CC
Slabs from ABS approved sources. ISO-ABS QE for ISO 9002.
D 1-3/8" CC
Slabs from ABS approved sources. ISO-ABS QE for ISO 9002.
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 49 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
U.S.A.
AH,DH 2" CC
ISO-ABS QE for ISO 9002
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 50 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
U.S.A.
D,E 6" IC
ISO-ABS QE for ISO 9002
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 51 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
U.S.A.
AH,DH,EH 6-1/2" IC
ISO-ABS QE for ISO 9002
AH,DH,EH 2" CC
ISO-ABS QE for ISO 9002
DH 1/2" CC
Slabs from ABS approved source.
Plate(AR) A 3" CC
Slabs from ABS approved source.
AH 1/2" CC
Slabs from ABS approved source.
B 3" CC
Slabs from ABSapproved source.
D 1-3/8" CC
Slabs from ABS approved source.
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 52 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
U.S.A.
EH 2-1/2" CC
Slabs from ABS approved source.
D 6-1/2" IC
ISO-ABS QE for ISO 9002
EH36 7" IC
ISO-ABS QE for ISO 9002
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 53 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
U.S.A.
AH36 19mm CC
Billet supplier Alton Steel Inc., Alton, IL
AH 3/4" CC
Billets from ABS approved source.
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 54 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
U.S.A.
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 55 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
U.S.A.
AN 5" CC
Slabs from ABS approved sources. ISO-ABS QE for ISO 9002.
AN,BN,DN 4" CC
Slabs from ABS approved sources. ISO-ABS QE for ISO 9002.
D,E 2" CC
Slabs from ABS approved sources. ISO-ABS QE for ISO 9002.
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 56 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
U.S.A.
Slabs A 242mm CC
Slabs from ABS approved source
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 57 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
U.S.A.
A,B,D,E 4-1/2" CC
ISO-ABS QE for ISO 9002
A,B,D,E 6-1/2" IC
ISO-ABS QE for ISO 9002
UKRAINE
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 58 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
UKRAINE
Plates(N) A 51mm IC
AH, DH 45mm IC
B, D 45mm IC
E 25mm IC
EH 51mm IC
EH32 19mm IC
UNITED KINGDOM
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 59 of 60
AMERICAN BUREAU OF SHIPPING
24/May/2004 APPROVED STEEL MILLS
COUNTRY
UNITED KINGDOM
NOTES
Shapes also include Bars; (AR)-As Rolled; (N)-Normalized; (Q&T)-Quenched & Tempered
(CR)-Control Rolled; (TMCP)-Thermomechanical Control Processed; (AC) Accelerated Cooling
(XXXX)-Mill Designation for Special Rolling Process
All-Ordinary and Higher Strength, excluding H40 and FH
AH,DH,EH - H32 and H36, unless indicated otherwise
IC-Ingot Cast; CC-Continuous Cast
Page 60 of 60