Professional Documents
Culture Documents
EW210D Axle, Installing
EW210D Axle, Installing
Axle, installing
Op nbr 461-003
1. Place the front axle on the wooden blocks and drive in the axle with the trolly jack.
Figure 1
Front axle, assembly
Figure 2
Pin assembly
1. Locking plate
2. Bolt
3. Pivot pin
4. Lubrication hose
3. Install the adapter and the lubrication hose (4) on the rear side of the pin.
4. Install the grease nipple with the extension piece (2) on the front side of pin.
Figure 3
Front axle, front view
1. Brake hoses
2. Grease nipple with extension piece
Figure 4
Front axle, steering cylinder
Figure 5
Propeller shaft connection
1. Bolt
2. Self locking nut
8. Activate the axle lock cylinders. Start the diesel engine and press the axle locking switch (see operator manual).
If this is not possible before installing the wheels, support the axle with blocks.