Professional Documents
Culture Documents
Janome 652 Sewing Machine Instruction Manual
Janome 652 Sewing Machine Instruction Manual
com
m
INSTRUCTION
.co BOOK
es
uid
-g
MODEL 652
all
All manuals and user guides at all-guides.com
TABLE OF CONTENTS
SECTION 1. KNOW YOUR MACHINE * Turn a Square Corner ....... ........ .......... 25
Locate and Identify the Parts..................... 2-3 * Use the Darning Plate ........ ............. 26
,Topstitcbing........................ ...... 26
SECTION 2. PREPARE YOUR MACHINE FOR SEWING Darning . .................. 27
Straight Stretch ...... ., . 27
Set Up the Machine..................... .. 4-8 Zigzag Stitches . ........... . , 28-35
*Plug in the Machine and Switch on the Power... .... 4 * Basic Zigzag ......................... 28
*Foot Control Use ........ 4
4eSaiStch................... ai tth................. 29
...............................................
* Set the Pressure Dial . . . . . . . . . . .. 5 * Applique . .. . . . . . . . . . . . . . . 30
* Setting Spool Pins .. . . . . . . .6 a Bar Tacking . . . . .. . . . . . . . .. 30
* Adjust the Presser Foot Lever . . . . . .. 6 * Monogramminig . . . . . . . . .. .. . 31
* Thread Cutter . . . . . .. 6 & Embroidery . . . . . . . . . . . . . .. 31
* Accessory Storage Box . ... . . . . . . ... 7 * Sew a Button . . .. . . . . . . .. 32
*Free Arm Sewing: the Removable Extension Table,. 7-~8 * Overcasting Stitch..................... ....... 33
Know What the Presser Feet Will Do............... 9~-11 a Rick-Rack Stretch .... ........ .............. 33
*Check Your Presser Foot ........................ 9 * Three-Step Zigzag . .. .......... ............ 34
*Change the Presser Foot ................. 9 * Overcast Stretch Stitching....................... 35
*Presser Foot Types ....................... 10-11 o Serging or Pine Leaf Stretch Stitching.............. 35
Choose Your Needle and Thread.......... 12 Blind Hemming ........... .. .. . . ............... 36
" Needle, Thread and Fabric Chart .. 12 Lace Work.................................... 37
" Check Your Needle............................ 12 Buttonhole Making........... ................ 38-39
* To Change Your Needle..................... ... 12 Sew in a Zipper .................... 40-41
Prepare the Bobbin ........ ............. 13-14 Shell Stitching. .ý. .............................. 42
" To Remove the Bobbin from the Machine........... 13 Two-Point Shell Stitching......................... 42
" Wind the Bobbin .. . . . . . . . . . .ý 13 S o kn . . . . . . .. . . . . . . . .. 43
*Insert the Bobbin into the Bobbin Holder............14 Smoecking ig ....... ... 4
repeYou Tp Tred
............... 15-8 aStretc Paitchin.......................... . .43
PrepreaYourTopTheadle................... ..... 15B Fagoting Bn Stietch............................... 44
*Pick Up Your Bobbin Thread.................... 16 Elastic Stretch Stitch................. ........... 45
*Adjust the Top Thread Tension. .............. 17-1B Box Stitching.................................. 45
Stitch Selector . . . . . . . . . . . . . . 18
Stitch Width Control ............. 19 SECTION 4. PERFORMANCE PROBLEMS CHART
Stitch Length Control .. . . . . . . . . . . . 19
Adjusting Stretch Stitch Balance ......... 19 What to Do When ............. 46-47
Reverse Stitch Control .. . . . . . . . . . . . 20
Starting To Sew ............ 20 SECTION 5. CARE FOR YOUR MACHINE
Replace the Light Bulb ........ 48
SECTION 3. LEARN THE STITCHES Clean the Bobbin Holder ............ 48
Practical Stitch Chart... 21--24 Clean the Hook Race and Feed Dogs................. 49
Straight Stitches ... ... ... 25--27 Oiling the Machines .. . . . . . . . . . . . . 49
" Straight Stitch .. . . . . . .. . . .. 25
" Use the Seam Guides . . . . . . . . . . .. 25
All manuals and user guides at all-guides.com
Take-up Lever
Controlh onro
••Stitch Wid~th Control
Face Cover
Thread PIate
CutteGuide
2h
All manuals and user guides at all-guides.com
Foote roontr
&m.
TOM
HmAWel Pesse Foo
Push Pe Clue
All manuals and user guides at all-guides.com
a
Foot cntro~
2. Insert the power supply plug into the outlet. NOTE: The foot control is sensitive and
will increase or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.
4
All manuals and user guides at all-guides.com
m
Set the Pressure Dial
.co
es
,Groove
Press-,
L*o irolSetn
Ii I Setiincj
'nark
uid
The pressure control dial is located inside the face cover plate.
Set the dial aligning the setting mark on the dial with the groove as follows.
3 ..... .most sewing
2 ..... .applique and Cut-Out work
1 ..... .basting, sewing chiffon, lace, organdy and other lightweight fabrics.
Also for velours and knits (with more stretch).
the machine is ready for most normal sewing the next time you use
it.
all
5
All manuals and user guides at all-guides.com
Spool pin
~Thraad
No.mat u•p
High
~position position
Highposition
.p Normal op
P-esser loot
lever
The spool pins are used for holding the You don't need a pair of scissors to cut the
spools of thread in order to feed thread to thread after you finish sewing. Just use the
the machine, handy thread cutter.
To use, pull up the spool pins. Place the The Presser Foot Lever raises and lowers your The threads are cut the proper length for
spool felt on the pins. Push down for presser foot starting the next seam.
storage. You can raise it about 0.6 cm higher than the
normal up position for easy removal of the presser
foot or to help you place heavy fabrics under the
presser foot.
6
All manuals and user guides at all-guides.com
Slot
Stitching sleeves, waistbands, pant legs, * Darning socks or mending knees, elbows, * Sewing buttons on sleeves, waistbands,
or any circular garment area. or areas of wear in children's clothes. etc.
8
All manuals and user guides at all-guides.com
The Presser feet are an important feature of this machine. You need to know Use the correct presser foot for the stitch you wish to sew. Consult the
what each f oot does in order to use them effectively. Stitch Pattern Chart and the detailed directions for sewing with the various
Your presser foot is held in place by a Foot Holder. Each presser foot merely presser feet.
snaps on the foot holder, which is seldom removed.
If you need to remove or attach the foot holder, here is what you do.
oIf
Foot ~t
holder >'
9
All manuals and user guides at all-guides.com
m
Know What the Presser Feet Will Do (Continued)
. Presser Foot Types
To Snap On
.co A: Zigzag foot H: Straight foot
es
0Use this foot for both straight and zigzag Use this foot exclusively for straight
stitching. stitching using center needle position only.
pmUses: Zigzag stitching (see page 28). Uses: Straight stitching (see page 25),
Bar tacking (see page 30), Topstitching (see page 26).
Button sewing (see page 32), Straight stretch (see page 27).
Overcasting stitch (see page 33),
uid
10
All manuals and user guides at all-guides.com
Use this foot for buttonholes of built in This foot can be set to sew on each side of Use this transparent foot for satin stitch and
system. It is marked to measure your your zipper. The edges of the foot guide the outlining applique.
buttonholes accurately. zipper and keep the seam straight. Uses: Satin stitch (see page 29),
Uses: Buttonhole making (see page 38). Uses. Zipper application (see page 40). Applique (see page 30),
Monogramming (see page 31),
Shell stitching (see page 42).
All manuals and user guides at all-guides.com
50Silk
HEAVY Denim, Tweed, Gabardine, 40 to 50 Cotton
WEIGHT Coating, Drapery and Upholstery Fabric 40 to 50 Synthetic 14 or 16 F
Cotton Covered Polyester
NOTE:
In general, fine threads and needles are used for sewing thin fabrics, and thicker threads
and needles are used for sewing heavy fabrics. Always test thread and needle size on a
small piece of fabric which will be used for actual sewing.
*Use the same thread for needle and bobbin.
*When sewing stretch, very fine fabrics and synthetics, use a BLUE TIPPED needle. The NOTE: Raise the needle bar to its highest posi-
blue tipped needle effectively prevents skipped stitches, tion by turning the hand wheel toward
*hnsewing very f ine fabrics, sew over a piece of paper to prevent yarn distortion.
you.
1. Loosen the needle clamp screw by turning it
* Check Your Needletoadyu
1. Never use a bent needle or one with a dull point. 2 eoetenel ypligi onad
The exact length of your needle is shown at left. 3. Insert the new needle into the needle clamp
Be sure you never use one in your machine that with the flat side away from you.
is not this exact length. 4. Push the needle up as far as it will go.
2. A damaged needle can cause permanent snags or 5. Tighten the needle clamp screw firmly with the
runs in knits, fine silks and silk-like fabrics, large screwdriver from your accessory storage
*Always buy a good quality thread. It should resist box.
tangling and be strong, smooth and consistent in
thickness.
12
All manuals and user guides at all-guides.com
2. Set aside.
3. Lift out the bobbin, as shown. 1. Put your spool of thread onto spool pin, with the thread winding in the direction
shown.
2. Pull the clutch away from the machine to stop the needle from moving while you
winding the bobbin.
3. Draw thread from spool through bobbin winder tension disc as shown.
4. Place the threaded bobbin on the bobbin winding spindle so that the thread comes
out on top.
5. Push the bobbin winder spindle to the right until it clicks.
6. Holding onto end of thread, depress the foot control.
7. When the bobbin is slightly filled, stop the machine and clip the thread coming from
the bobbin.
8. Slowly start the machine again and wind the thread until the bobbin stops.
9. Push the bobbin winder spindle to the left and clip the thread.
10. Remove the bobbin.
11. Push in the clutch for normal sewing operation.
13
All manuals and user guides at all-guides.com
___ B
1. Put the bobbin into the bobbin 2. Pull about 10 cm of thread 3. Then pull the thread clockwise 4, Slide the bobbin cover plate while
holder so that the thread feeds toward you through the tension toward the back of the machine pushing it down slightly over the
counter-clockwise (left), slot .A through the slot .bobbin. Allow about 10 cm of
thread to show above the needle
plate.
14
All manuals and user guides at all-guides.com
m
Prepare Your Top Thread
* Thread Your Needle
36
.co
1J,
es
Raise take-up lever to its highest position by turning hand wheel toward you.
®, :: ® Raise presser foot lever.
6 Place spool on spool pin as shown, with thread coming from the back of the spool.
1. Draw thread into thread guide using both hands.
uid
2. While holding thread near spool, draw thread down into the tension area and then around the
check spring holder.
The numbered steps above follow the numbers 3. Firmly draw thread up and through take-up lever from right to left.
on the illustrations.
Dotted lines show places where the thread 4. Draw thread down and slip it through the thread guide.
loops and then is pulled tight. 5. Thread then is slipped into needle bar thread guide.
6. Thread needle from front to back.
NOTE: You may want to cut the end of thread with sharp scissors for easier needle threading.
-g
all
15
All manuals and user guides at all-guides.com
1. Raise presser foot lever. Hold 2. Bring bobbin thread up by pulling 3. Pull both threads under and to the
needle thread loosely in left hand top thread, back of the presser foot, leaving
and rotate handwheel toward 10 to 15 cm of thread clear.
you one complete turn.
16
All manuals and user guides at all-guides.com
Too rideTosideh
of farfabric
When adjusting top thread tension, the higher the number, the tighter the top
thread.t
17
All manuals and user guides at all-guides.com
Stitch Selector
Red
indicato
NOTE: To avoid needle or fabric damage, be sure your needle is up and out of
fabric when selecting a stitch.
Stitch patterns are color-coded to recommend setting zones at the stitch length
control.
18
All manuals and user guides at all-guides.com
Stitch Width Control Stitch Length Control Adjusting Stretch Stitch Balance
V Width V Length
01234511
0~
Stretch Stltch
The stitch width control regulates the The stitch length control regulates the In stretch stitch sewing, the stretch stitch
width of the stitch you select, length of stitch, and also has a stretch adjuster should usually be in a neutral
The higher the number, the wider the stitches setting. positiOn (between -+" and "-...or
stitch. The higher the number, the longer the
stitch.
tmeans no feed.
19
All manuals and user guides at all-guides.com
m
Reverse Stitch Control Starting To Sew
Now that you are familiar with the controls on your machine and with the accessories provided for the machine,
you are ready to start to sew with your sewing machine. Below are some good habits to follow each time you
.co
Reverse sit down to sew:
1. Inspect the needle. It should be straight, properly set and sharp on the point, It should be the correct size
for the fabric and thread being used. Do not be afraid to change your needle frequently. Many of the new
fabrics made of synthetic blends tend to dull the needles more easily than fabrics made of natural fibers,
2. Before placing the material on the machine, see that the ends of the threads have been drawn about 10 cm
to the rear of the machine. Hold on to threads during the sewing of the f irst 3 or 4 stitches of the seam.
3. Test the machine stitch on a scrap of fabric you plan to use, The fabric should be double thickness, Adjust
the machine for the length of stitch and tension suitable to your fabric.
es
To reverse stitch, hold down this con- 4. Fabric should be placed under the presser foot with the bulk of the material to the left of the needle and
trol during sewing. the right edge of the material placed on the 5/8" seam marking on the needle plate when making a simple
Release to sew forward again. seam.
5. Run the machine at a slow even speed, The more pressure you put on the foot control, the faster the
machine will sew,
6. Fasten each seam by back tacking at the beginning and end of the seam,
uid
7. Always finish sewing each seam with the needle at its highest point.
8. Guide the fabric gently with your hand in front of the needle. Never pull or hold the fabric in such a way
that the normal feeding is altered.
9. When turning the hand wheel manually, always turn it toward you.
-g
all
20
All manuals and user guides at all-guides.com
STRAIGHT Straight Check 2 6 Pink 0 Regular seams, zippers, topstitching, darning, 25 27,
Chart Zone etc. 40 41
I 642x, ~ onp.1L2
Darning Zipper
plate foot
STRAIGHT Straight Check 2 6 Yellow 0 Use on knits and other stretch fabrics, good 27
STRETCH Chart Stretch for topstitching.
on p.12 iStitch
oPosition
ZIGZAG Zigzag Check 3-8 Pink 1 -- 5 Finish edges, buttons, satin stitch, applique, 28-33
Chart Zone monogram, embroidery, sewing bar tacks,
on p, 12
RICK-RACK Zigzag i Check 2-6 Yellow 2 -5 Decorate garments with one row or several. 33
STRETCH Chart Stretch
on p. 12 Stitch
Position
BLIND HEM Zigzag Check 2-6 Pink 2- 3 Use for finishing seams. 36
STITCH
Ion Chart
p.
12
Zone
21
All manuals and user guides at all-guides.com
OVERCAST Zigzag Check 2 6 Yellow 3 - 5 Use for swimwear, ski pants and other 35
STRETCH Chart Stretch garments that require stretch.
on p. 12 Stitch
Position
SHELL Satin Check 4 -9 Pink 3- 5 Finish hems, sleeve and neck openings. 42
STITCH Chart i Zone Use on nylon tricot and other lingerie to
on p.1 overcast and seanm.
i Do shell tucking on blouses and lingerie.
SERGING Zigzag Blue (11) 3 6 Yellow 3 - 5 Finish hems, sleeve and neck openings. 35
on p. 12 Stretch Use on nylon tricot and other lingerie to
Stitch overcast and seam.
Position Do shell tucking on blouses and lingerie.
22
All manuals and user guides at all-guides.com
ELASTIC
STRETCH Zigzag Check
Chart
3 -6 Yellow
Stretch
3 - 5 Use for applying elastic. 45
<< on p. 12
Position
Stitch
FAGOTING Zigzag Check 3 8 0.5 '-2 5 Join two folded edges for decorative 44
Chart open-work appearance.
on p. 12
TWO-POINT SHELL Zigzag Check 3 -'8 Pink 3 - 5 Do shell tucking on blouses and lingerie, 42
STITCHING Chart Zone This stitch can also be used as a single
overlock stitch as well.
on p. 12
L
rr
23
All manuals and user guides at all-guides.com
HERRING BONE Zigzag Check 2 -6 Yellow 3 -5 Use as hemming stitch for blankets, table- 44
STR ETCH Chart Stretch cloth and draperies.
on p. 12 Stitch
Position
SATIN STITCH Satin Check 3 -8 0.5- 1 2-S Use for applique work, also as decorative 29
Chart finish for placemats, blankets, collars,
on p. 12 cuffs and pockets.
24
All manuals and user guides at all-guides.com
m
Straight Stitches
Straight Stitch Use the Seam Guides
Set the Machine
Stitch width N
.co
control 0 111
Cornering qurde
Top thread tension The seam guides on the needle plate
control 2 to 6 Stitch length are engraved to help you measure seam
\ control cink Before sewing with the straight stitch 7. At the beginning and end of width. The lines are 1/8" apart, with
es
zone foot, always set the stitch width seam, you may want to reverse to the 5/8" and 7/8" lines marked.
--][4L7i , " 3 control to 0 to avoid breaking the lock the stitch.
j63
'9/
needle. 8. Raise the presser foot and remove
*Turn aSquare Corner
o4 1. Raise the presser foot. the fabric.
6. Hold the fabric loosely and gently needle by turning hand wheel
guide it along the guide line, so toward you when the fabric edge
that it feeds naturally. facing you lines up with the
Do not force the fabric or try o cornering guide, as shown.
pullit tight. 2, Raise the presser foot and turn
the fabric to line the edge
with
all
Sometimes when you sew, you want to control the fabric yourself. L].Lwe h pesr ot
The Darning Plate covers the feed dogs so that they do not touch the fabric. 4 2. Keep the edge of the fabric next
To Put on the Darning Plate: t Othergteg.o h rse
NOTE; The rectangular holes in the Darning Plate match the holes in the
needle plate. In the darning plate. these holes are slightly to the
(
Stretc Stitc 3. Evely te fabri along thiso
duid
right of center, edge.
tops produce frmtevendrweo
acn
1. Position the darning plate with the pins on the bottom. H: Straight foot tptthn mfo h de
2. Fit the darning plate pins into the needle plate holes at the
5/8" mark. The feed dogs will show through the darning plate The Stitch and Its Uses
holes. Topstitching emphasizes the lines of
Use the darning plate in the following ways: your garment and keeps seams and
edges flat and crisp.
Darning (see page 27),
Button Sewing (see page 32). Accent suits or blouses with one or
two rows of topstitching around the
outer edges of cuffs, lapels or collars.
26
All manuals and user guides at all-guides.com
Top thread
tension
control Stitch length Top thread tension Stitch length
2 to6 control any number control 2 to 6 control yellow
(rnot notestory to steth stitch
2 Here's How 2
5. Move the fabric back and forth slowly until This stitch can also be used for clothes).
Ti tthcnas eue o
you have covered the darning area. The stretch stitch does not
topstitching on all fabrics.
6. Turn the fabric half turn and sew another actually stretch as it is being
layer of stitching over the first layer. sewn, but is stitched in a
forward and back motion
NOTE: If your fabric is thin or badly damaged,
use a separate piece of fabric under the (sometimes called a "reverse-
action" stitch), so that it will
hole to reinforce it.
give when the fabric stretches
7. When you finish darning, remove the darning instead of breaking.
plate and replace foot holder and foot.
27
All manuals and user guides at all-guides.com
Zigzag Stitches
Basic Zigzag
Set the Machine
Stitch width
control 1 to 5
28
All manuals and user guides at all-guides.com
Satin Stitch
Set the Machine
Stitch width Stit
control 2 to 5
tp hread
tension :3
control 3 to 8 Stitch length
control 0,5 to I
I or
Pressure dial:
29
All manuals and user guides at all-guides.com
m
Zigzag Stitches (Continued)
Applique e Bar Tacking
Set the Machine Set the Machine
Stitch width
.co
Stitch width
control 2 to 5 control 2 to 5
30
All manuals and user guides at all-guides.com
Monogramming * Embroidery
Set the Machine Set the Machine
Stitch width I Stitch width
control 5 control Ito 5
IHAi i3
Top thread tension Top thread tension Stitch length control
control 2 to6 Stitch length control2 T 6 Anv r io lr ...
control 0 5 to 1 ....... r ry tt >djut Here's How
0 3 Here'sHow - 1. Put the darning plate on the needle
tL4T i 1. Set the same as satin stitch. iii plate (see page 26).
i•4 4 --
2. Back the fabric with paper or 2. Remove foot holder (see page 9).
interfacing. Nopresser 3. Adjust the stitch width as desired
Stretch Stitch 3. Draw the letters on the fabric foot Stretch Stitch (see page 19).
with tailor's chalk. 4. Draw the design on to the fabric
"
F: Satin stitch fot 4. idh stitch,
Satin s or stitch
adjusting the echDarning plate %>s with tailor's chalk.
foot width as necessary to form each 5. Stretch the fabric between embroi-
pattern. dery hoops and place under the
5. If using paper, carefully remove it needle.
when you have finished sewing. 6. Lower the presser foot lever to
engage the top thread tension.
7. Holding the top thread in your left
hand, rotate the hand wheel toward
you one complete turn.
Pull the top thread to draw the
bobbin thread through to the surface
of the fabric.
8. Using a medium speed, stitch along
the marked outline, guiding the
fabric carefully by hand.
31
All manuals and user guides at all-guides.com
4." N Use the darning plate for button sewing (see page 26). To strengthen the shank, cut the
\ 3 1. Match the center of the button holes to the center of the slot on the presser threads leaving a 20 cm tail. Bring the
4 foot- needle thread down through the hole
2. Adjust the stitch width so that needle will drop in each hole. sn hank to.n wn i run h
FM
ý igzg fotTurn
A:
Stretch Stitch 3. Lower the foot to hold the button in place.
the hand wheel by hand so that needle will enter either hole of the
Da h hedt h otmsd
and knot.
button.
Dar
Darin plte4. Stitch several times,
32
All manuals and user guides at all-guides.com
start right at the edge, the fabric will 4 This stitch can be used as a decorative
bunch up and the stitches will become top stitch as well.
Stretch Stitch tangled.
Lr SS Stretch Stitch
A Zigzag foot A: Zigzag foot
33
All manuals and user guides at all-guides.com
4 0
Place the fabric under the presser foot Position the tear under the needle so
Stec 4 sothat the edge will be slightly inside that the stitching will catch both sides.
teright hand side of the presser foot.
SrthStitch Guide the work so the right hand
F T-R,::stitches tall at the edge of the fabric.
A: Zigzag foot
m
* Overcast Stretch Stitching * Serging or Pine Leaf Stretch Stitching
Sel the Machine Set the Machine
Stitch width Stitch width
.co
control 3 to 5 control 3 tob5
1 2 34
the LEFT of the needle as shown. foot so that the stitches are made
Stitch so the needle pierces the fabric over the edge.
just short of the outside edge.
Stretch Stitch Or, place your fabric to allow a Stretch Stitch NOTE: When using stretch knit
uid
you are making swimwear, ski pants heavyweight woven fabrics where you
and other garments that require want a narrow seam. It is also great
stretch for making elastic swim wear.
all
35
All manuals and user guides at all-guides.com
Blind Hemming
of fabric
WeIgh
o Fabric
1. Finish the raw edge of your hem any way you desire. (see overcasting page 33).
5. After hemming, press both sides of the finished hem. The top side of the garment will show only the blind stitches.
36
All manuals and user guides at all-guides.com
Lace Work
>4Ar
Stretch Stitch
Lace adds a fanciful, feminine touch
A. Zigzag toot to blouses and lingerie. Table linens
and pillows become more elegant
when trimmed with lace.
Turn raw edge of fabric under at least
1.5 cm. Place lace underneath and
topstitch using stretch blind hem
stitch.
Trim excess fabric close to stitching.
37
All manuals and user guides at all-guides.com
Buttonhole Making
" "A"
Stitch length A
control
Blue ZroeP=
0 ,2 1. a. Carefully mark the buttonhole 2. a. Move the slider (A) toward you 3. a. Set the stitch selector at E
length on your garment, so that the top mark (C) on the b. Sew forward until you reach the
4i b.
Change to the sliding buttonhole slider meets the start mark (B). front marking of your button.
foot. br Line up the markings on the hole.
Top thread tension
control 2 to 6 fo ihtetpmr nyu
Stretch Stitch c. Insert the garment under the foot with the top mark on your c. Stop sewing at the left stitch.
F foot with the buttonhole mark garment.
Sliding buttonhole foot
A4 ing running toward you. c. Lower the presser foot.
3 NOTE: The markings on the slider
are engraved in centimeters.
Adjusting the Stitch Density
Depending upon your fabric or your
own preference in buttonholes, you 1)
may alter the buttonhole stitch
density within the blue buttonhole r
range on the stitch length dial.,
1. For less density, turn the dial
toward "1", r .
Do
4. a. Set the stioch selector at 5. a. Set the stitch selector at j 6. a. Set the stitch selector at 7, Remove the fabric and cut the
b, Sew 4 to 6 stitches, b. Sew until you reach the back of b. Sew 4 to 6 stitches, hole open with the buttonhole
opener in your accessory storage
c. Stop sewing at the ight stitch, the buttonhole cc Stop sewing at the left stitch, box.
c. Stop sewing at the right stitch,
NOTE
When sewing at the edge of fabric, set
sliding buttonhole foot as illustrated
and sew in reverse I3
39
All manuals and user guides at all-guides.com
m
Sew in a Zipper
.co
Put the top sides of the fabric together Stitch width 0.2 to 0.3 con te
and sew to the end of the zipper control 0
opening. Use the reverse to lock the
stitches.
Sew the zipper opening with stitch
length at "4" and top thread tension Bhottrnp
at -3". Top thread tension
side of
fabric
control 2 to 6Botmsd
Stitch length j o-abi
es
s control 2
- ~~Ldofoenn To Sew: 4. Attach the presser bar to the right
Kthread
~~~~7~~ N . Reset stitch length at 2 and top
tension at 2 to 6. 5.
pn ntezpe ot
Lower the zipper foot on the top
Top side KFold back the left seam allowance side at the bottom of the zipper
of farc- as shown, so that the needle pierces the fold
StechSith2. Turn under the right seam allow- and the zipper tape.
uid
ance to form a 0.2 to 0.3 cm fold. 6. Sew through the fold and the
Top edge of fabric E: Zipper zipper tape to the point where the
foot 3. Place the zipper teeth next to the sie eis
0.2 to 0.3 cm fold and pin in sie eis
To attach the zipper foot: place. 7. Lower the needle to hold the
fabric and raise the presser foot.
* To sew on the left side of the zipper,
attach the presser bar to the right pins
on the zipper foot.
-g
40
All manuals and user guides at all-guides.com
1 op side
Slde oft fAhr V
8. Open the zipper. 10. Close the zipper and turn the 11. Remove the zipper foot and 14. Stop about 5 cm from the top of
9. Lower the presser foot and stitch fabric top side up. attach the presser bar to the left the zipper,
the rest of the seam, pins on the zipper foot. 15. Lower the needle into the fabric
12. Stitch across and below the hot- and raise the presser foot.
torn of the zipper. 16. Remove the basting stitches and
13. Turn the corner and continue to open the zipper.
guide the foot along the zipper 17. Lower the foot and stitch the rest
teeth, as shown, of the seam. Make sure the fold is
Stitch through the fabric and evn
zipper tape,
41
All manuals and user guides at all-guides.com
42
All manuals and user guides at all-guides.com
50,4!)f
4 3 knees.
[7 - Stitch Stretch
FF_____ Stec Stch I F-Vý
43
All manuals and user guides at all-guides.com
I I
0
12 ~I 1
I 0
2. Pin the two edges to paper or Trim close to stitching. The stitch will
Stretch Stitch tear-away backing 0.2 to 0.3 cm prevent raveling.
F apart. R Stretch Stitch
3. Sew slowly, guiding the fabric so
the needle catches the folded
edge on each side.
The Stitch and Its Uses The Stitch and Its Uses
Use this stitch to join two pieces of Use as hemming stitch for blankets,
fabric to create an open work tablecloth and draperies.
appearance and add design interest,
44
All manuals and user guides at all-guides.com
m
Elastic Stretch Stitch Box Stitching
.co
control 3 to 5 control 3 to 5
1234 234
3
C DSrth _use tth > 4 Overlap two raw edges together and
interlining.
this stitch to join them.
Stretch Stitch
uid
buted.
45
All manuals and user guides at all-guides.com
What to Do When
Incorrect size needle. Choose correct size needle for thread and fabric.
Improper threading. Rethread machine.
Loose upper thread tension. Tighten upper thread tension.
Irregular Stitches Pulling fabric. Do not pull fabric; guide it gently.
Loose presser foot. Reset presser foot.
Unevenly wound bobbin. Rewind bobbin.
Nicks or burrs at hole of needle plate. Replace needle plate, or polish off burrs completely.
Upper and lower threads not drawn back When starting a seam be sure to draw both threads under and
Bunching of Thread under presser foot before starting seam. back of presser foot about 10 cm and hold until a few stitches
are formed.
46
All manuals and user guides at all-guides.com
Incorrect size needle, Choose correct size needle for thread and fabric.
SipnStthsBent or blunt needle. Insert new needle.
SipnStthsIncorrect setting of needle. Reset needle.
Tight upper thread tension, Loosen upper thread tension,
- -- - -- ---- ---- ---
Machine Jamming Knocking Noise Thread caught in hook race. Disassemble and clean hook race.
Lint in bobbin holder or hook race. Clean bobbin holder and hook race.
47
All manuals and user guides at all-guides.com
To insure that your machine operates at its best, you need to keep the
essential parts clean at all times.
The bobbin area can attract dust and lint. Your machine can become sluggish
or knock loudly if a thread is caught.
48
All manuals and user guides at all-guides.com
Clean the Hook Race and Feed Dogs Oiling the Machine
Open face cover plate and oil points as shown below at least once a year. One or
two drops of oil is sufficient.
Remove excess oil, otherwise it may stain fabrics.
1.Unplug the machine and remove 5. Take out the bobbin. Lift up the
the presser foot and needle, bobbin holder and remove it.
2. Remove the bobbin cover plate.
6. Use the lint brush to clean the 7. Line up the triangle marks and
feed dogs, hook race and bobbin position the bobbin holder so
holder. Also use a soft, dry that the notch fits next to the
cloth, stopper in the hook race.
Printed in Taiwan
49
All manuals and user guides at all-guides.com
m
.co
es
uid
-g
all
652-800339 (E-N)