Professional Documents
Culture Documents
9106 From Portal
9106 From Portal
CIRCULATED PHASE-2 REVIEW DOCUMENT (GENERATED) BY SINAM HUDSON SINGH ON 19-01-2022 17:05:23
Review Analysis:
5.1) Status of standard(s), if any from which assistance had been drawn in the formulation of this IS.
1. Standard 2. Standard 3. Whether the standard has since been 4. Major 5. Action
(No.) (Title) revised changes proposed
1. 2. Referred 3. Since 4. Changes in the referred Standards since last review 5. 6. Action
Referred standards revised of standard Changes proposed
standards (Title) standard in the
(No.) number of the referred
corresponding standard
standard which
are
affecting
the
standard
under
review
https://www.services.bis.gov.in:8071/php/BIS_2.0/Reaffirmation/ProcessAction.php?ID=MTYzNzQ= 1/4
1/19/22, 5:05 PM Admin | Dashboard
IS 319: Specification IS 319: 2007 a) The word ‘Leaded’ is deleted from the main heading of
1974 for free the standard, b) Grade 3 has been deleted, since it is not
cutting brass found suitable for high speed machining operation, c)
bars rods Mercurous nitrate test is made mandatory since there is
and sections no other test which reveals the internal stress levels,
which are harmful for stress corrosion/season cracking, d)
“Hardness requirements have been specified, and e) The
supply condition for shapes and sections being
introduced
IS Specification IS 210:2009
210:1978 for grey iron
castings
IS Specification
6760:1972 for slotted
countersunk
head wood
screws
5.3) Any other standards available related to the subject & scope of the standard being reviewed (International/regional/other
national/association/consortia, etc or of new or revision of existing Indian Standard).
1. Standard (No.) 2. Standard (Title) 3. Provisions that could be relevant while reviewing the IS 4. Action proposed
https://www.services.bis.gov.in:8071/php/BIS_2.0/Reaffirmation/ProcessAction.php?ID=MTYzNzQ= 2/4
1/19/22, 5:05 PM Admin | Dashboard
1. 2. 3. Relevant clause of the IS under review that is likely to be impacted (Clause & 4. Action
Source Development IS No.) proposed
5.6) Issues arising out of changes in any related IS or due to formulation of new Indian Standard.
1. Related IS 2. 3. Provision in the IS under review that would be 4. Changes that may be 5. Action
(revised or Related impacted & the clause no. or addition of new necessary in the Standards proposed
new) IS Title clause/provision under review
ACTION
ACTION LOG
SINAM HUDSON
https://www.services.bis.gov.in:8071/php/BIS_2.0/Reaffirmation/ProcessAction.php?ID=MTYzNzQ= 3/4
1/19/22, 5:05 PM Admin | Dashboard
SINGH
(Employee)
COMMUNICATION
Copyright ©2020. All rights reserved. Designed & Developed by ITSD, BIS
https://www.services.bis.gov.in:8071/php/BIS_2.0/Reaffirmation/ProcessAction.php?ID=MTYzNzQ= 4/4