Professional Documents
Culture Documents
TechnicalDataSheet (TDS) HiTEC152 EN 07212017
TechnicalDataSheet (TDS) HiTEC152 EN 07212017
HiTEC® 152
Tackifier Component
Application
HiTEC® 152 tackifier component is a tackiness additive consisting of a
5% solution of a high molecular weight (1.6 million M.W. average)
polymer in mineral oil. HiTEC® 152 tackifier component is used to
improve lubricant retention time on working surfaces, and can be used
to formulate bar and chain lubricants, open gear lubricants, and slideway
oils. HiTEC® 152 is also useful in grease (all soap types) to reduce water
spray off; HiTEC® 152 may be used in a variety of lubricants which are
delivered via a misting system - in these systems HiTEC® 152 will reduce
the tendency for fogging.
Recommended Dosage
Typical dosages range between 0.5% to 2.0% wt. for the formulation
of bar and chain lubricants, open-gear lubricants, slideway oils and
other oils. Please contact your Afton Chemical representative for specific
recommendations.
Typical Characteristics
Appearance Clear bright pale viscous liquid
Specific Gravity @ 15.6/15.6°C 0.875
Density, lbs/gal. 7.30
Viscosity @ 100°C, cSt 2850
Flash Point, °C (PMCC) 155 min.
Handling Infomation
Max Handling Temp: 80°C
Shelf Life: 60 months
© 2011. Afton Chemical Corporation is a wholly-owned subsidiary of NewMarket Corporation (NYSE:NEU). HiTEC® is a trademark of Afton Chemical Corporation. 07/11.
The information in this bulletin is, to our best knowledge, sure and accurate, but all recommendations or suggestions are made without guarantee since the conditions of use
are beyond our control. Afton Chemical Corporation and its affiliates disclaim any liability incurred in connection with the use of these data or suggestions. Furthermore, nothing
contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use.