You are on page 1of 4

12/5/22, 10:59 Attempt Quiz for Session 2: Attempt review

Started on Tuesday, 10 May 2022, 2:20 AM


State Finished
Completed on Tuesday, 10 May 2022, 2:23 AM
Time taken 3 mins 30 secs
Grade 5.00 out of 5.00 (100%)

Question 1

Correct

Mark 1.00 out of 1.00

In a solar module, identify whether the short circuit current (ISC) is higher, lower or the same value as the maximum power current
(IMP).
Select one:

higher

lower

same value

Your answer is correct.


The correct answer is:
higher

https://isatraining.gses.in/mod/quiz/review.php?attempt=4957&cmid=115 1/4
12/5/22, 10:59 Attempt Quiz for Session 2: Attempt review

Question 2

Correct

Mark 1.00 out of 1.00

From the selection in the list, identify the appropriate answer for what each value on the curves represents, and also what the red
and blue curves represent.

Match the following:

7.7 A Maximum Power Point Current (Imp) 

35.7V Maximum Power Point Voltage(Vmp) 

43.9V Open Circuit Voltage (Voc) 

275W Maximum Power (Pmax) 

Red Curve IV Curve 

Blue Curve Power Curve 

8.0A Short Circuit Current (Isc) 

Your answer is correct.


The correct answer is:
7.7 A → Maximum Power Point Current (Imp),
35.7V → Maximum Power Point Voltage(Vmp),
43.9V → Open Circuit Voltage (Voc),

275W → Maximum Power (Pmax),


Red Curve → IV Curve,
Blue Curve → Power Curve,
8.0A → Short Circuit Current (Isc)

https://isatraining.gses.in/mod/quiz/review.php?attempt=4957&cmid=115 2/4
12/5/22, 10:59 Attempt Quiz for Session 2: Attempt review

Question 3

Correct

Mark 1.00 out of 1.00

Identify which cell type has the highest efficiency in commercially available PV modules.
Select one:

Poly-crystalline Silicon

Mono-crystalline Silicon

Amorphous Silicon

Crystalline Thin Film Silicon

Your answer is correct.


The correct answer is:
Mono-crystalline Silicon

Question 4

Correct

Mark 1.00 out of 1.00

Identify the reference conditions for finding the nominal operating cell temperature (NOCT).
Select one:

AM 1.5, Ambient temperature of 25°C, Irradiance of 800W/m2, wind speed of 1m/s and an electrically open circuit

AM 1.5, ambient temperature of 25°C, Irradiance of 1 kW/m2 , wind speed of 1m/s and an electrically open circuit

AM1.0, ambient temperature of 20°C, Irradiance of 1 kW/m2 and wind speed of 1m/s

AM 1.5, Ambient temperature of 20°C, Irradiance of 800W/m2, wind speed of 1m/s and an electrically open circuit

Your answer is correct.


The correct answer is:
AM 1.5, Ambient temperature of 20°C, Irradiance of 800W/m2, wind speed of 1m/s and an electrically open circuit

https://isatraining.gses.in/mod/quiz/review.php?attempt=4957&cmid=115 3/4
12/5/22, 10:59 Attempt Quiz for Session 2: Attempt review

Question 5

Correct

Mark 1.00 out of 1.00

What is the main function of a bypass diode? Select one:

It provide an alternative path for current in the circuit


It prevents the flow of current in circuit

Your answer is correct.

The correct answer is: It provide an alternative path for current in the circuit

https://isatraining.gses.in/mod/quiz/review.php?attempt=4957&cmid=115 4/4

You might also like