Professional Documents
Culture Documents
VA - Air Devices by Pak Premier Engineering
VA - Air Devices by Pak Premier Engineering
FEATURES:
FEATURES:
Page 01 Of 04
VOLUME CONTROL DAMPERS
VA-VCD, VA-RD & VA-BD VALUE AIR
NAME OF QUALITY PRODUCTS
FEATURES:
Page 02 Of 04
PRODUCT DIMENSION
VA-VCD VALUE AIR
NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
D
W
FRAME
ROTATION
BLADES
H + 50 mm
SHAFT
H
HANDLE
BUSH PIN
ANGLE STOP
D
W
FRAME
BLADES ROTATION
H + 50 mm
SHAFT
H
HANDLE
BUSH PIN
ANGLE STOP
Page 03 Of 04
PRODUCT DIMENSION
VA-BD & VA-RD VALUE AIR
NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
W D
Blades
Steel Rod
Frame
H + 50 mm
Angle Stop
Inside Inside
Diameter Diameter
Hand Quardrant
& Bracket
L + 50 mm
ROUND DAMEPRS
Page 04 Of 04
FIRE DAMPERS
VA-FD VALUE AIR
NAME OF QUALITY PRODUCTS
There is a wide choice of sizes available suitable for low, medium and
high velocity applications. The dampers are fitted with standard
release 72°C fusible links unless otherwise specified.
VA-FD
FEATURES:
Available Sizes
Frame: Galvanized Steel Sheet normally fabricated in 18 /
16 Gauge. Higher gauges will be provided as
Min. Max.
required.
6” x 6” -----
Blades: Galvanized Steel Sheet 18 / 14 Gauge construction
with not more than 175mm width. Higher gauges will be
provided as required.
Page 01 Of 02
PRODUCT DIMENSION
VA-FD VALUE AIR
NAME OF QUALITY PRODUCTS
FIRE DAMPER
D
W
SPRING
FRAME
FUSIBLE LINK
BLADES
ROTATION
H + 50 mm
H
BUSH PIN
ANGLE STOP
Page 02 Of 02
CEILING DIFFUSER
Concentric Supply/Return
VA-D100 & VA-D200 Series VALUE AIR
NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
SF - Surface Flat
NECK SIZE
1-5/16”
7/8”
1/4”
SB - Surface Beveled
NECK SIZE
1-5/16”
1”
MANUFACTURED BY:
PAK PREMIER ENGINEERING
SUPPLY / RETURN AIR GRILLES & REGISTERS
VA-G100, VA-G200 Series VALUE AIR
NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
N = Neck Size
Listed - 1/8” Neck Size + 2-1/2”
2”
Listed - 1/8”
(W & H)
Listed 3/4”
4”
N = Neck Size
Listed - 3/4”
Neck Size + 2-1/2”
2”
Listed - 1/8”
(W & H)
Listed 1/8”
4”
MANUFACTURED BY:
PAK PREMIER ENGINEERING
SUPPLY / RETURN AIR GRILLES & REGISTERS
VA-G100, VA-G200 Series VALUE AIR
NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
N = Neck Size
Listed - 1/8” Neck Size + 2-1/2”
2”
Listed - 1/8”
(W & H)
Listed 3/4”
4”
N = Neck Size
Listed - 3/4”
Neck Size + 2-1/2”
2”
Listed - 1/8”
(W & H)
Listed 1/8”
4”
MANUFACTURED BY:
PAK PREMIER ENGINEERING
RETURN AIR GRILLES & REGISTERS VALUE AIR
VA-G300 Series NAME OF QUALITY PRODUCTS
VA-G350 & VA-G375 series return grilles and registers feature fixed
blades spaced on 1/2” centers. Model VA-350FB have face blades
with 0º deflection. Model VA-G375DFB has face blades with 40º
deflection. The appearance matches the VA-G100 & VA-G200 series VA-G300FB
supply grilles and registers.
Available Sizes
in One Piece
Min. Max.
6x4 72 x 48
RETURN AIR GRILLES & REGISTERS VALUE AIR
VA-G300 Series NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
½”
3/4”
VA-G300 VA-G350
RETURN AIR GRILLE RETURN AIR GRILLE
3/4” ½”
VA-G300FB VA-G350FB
3/4” ½”
VA-G300DFB VA-G350DFB
RETURN AIR GRILLES VALUE AIR
VA-G300 Series NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
3/4” ½”
VA-G325 VA-G375
RETURN AIR GRILLE RETURN AIR GRILLE
3/4” ½”
VA-G325FB VA-G375FB
40 Deflection 40 Deflection
3/4” ½”
VA-G325DFB VA-G375DFB
RETURN AIR GRILLES VALUE AIR
VA-G400 Series NAME OF QUALITY PRODUCTS
VA-G450 and VA-G475 return grilles and registers have fixed blades
spaced on 1/2” centers. Models VA-G450DFB & VA-G475DFB
have face blades with 35º deflection. Models VA-G450FB & VA- VA-400 Series
G475FB have face blades with 0º deflection. The appearance
matches the VA-150, VA-250 series supply grilles and registers.
FEATURES:
Available Sizes
in One Piece
Min. Max.
6x4 72 x 48
RETURN AIR GRILLES VALUE AIR
VA-G400 Series NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
½”
3/4”
VA-G400 VA-G450
RETURN AIR GRILLE RETURN AIR GRILLE
3/4” ½”
VA-G400FB VA-G450FB
3/4” ½”
VA-G400DFB VA-G450DFB
RETURN AIR GRILLES VALUE AIR
VA-G400 Series NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
3/4” ½”
VA-G425 VA-G475
RETURN AIR GRILLE RETURN AIR GRILLE
3/4” ½”
VA-G425FB VA-G475FB
35 Deflection 35 Deflection
3/4” ½”
VA-G425DFB VA-G475DFB
SUPPLY / RETURN AIR LINEAR BAR GRILLES
VALUE AIR
VA-4000 Series NAME OF QUALITY PRODUCTS
FEATURES:
Available Sizes
in One Piece
Min. Max.
4”x1-1/2” 72”x24”
SUPPLY / RETURN AIR LINEAR BAR GRILLES
VALUE AIR
VA-4000 Series NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
N = Neck Size
45mm
5mm
30mm
12mm
VA-4000
SUPPLY / RETURN AIR LINEAR BAR GRILLE
LINEAR SLOT DIFFUSEFRS VALUE AIR
VA-LSD Series NAME OF QUALITY PRODUCTS
STYLE DETAILS
Frame: The Frame & Blades are made of high quality
extruded Aluminum Profile with advantages of
corrosion resistance and rigidity. Available Sizes
Components: VA-LSD20 with 3/4” Slot margin & VA-LSD25 in One Piece
with 1” Slot margin.
Finish: Finished with Powder Coating / Anodizing. Min. Max.
The pattern controller is coated matte black to
12” x 1-Slot 72” x 10 Slots
accent the slot opening. Foam gasket is sealed
around the back of the frame as option to avoid air
leakage.
Reference: Tuttle & Baily 6000/7000 Series.
LINEAR SLOT DIFFUSEFRS VALUE AIR
VA-LSD Series NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
N = Neck Size
65mm
30mm
18mm 18mm
FEATURES:
Frame: The Frame & Blades are made of high quality STYLE DETAILS
extruded Aluminum Profile with advantages of
corrosion resistance and rigidity.
Components: VA-ARLD20 with 3/4” Slot margin & VA-ARLD25 Available Sizes
with 1” Slot margin. in One Piece
Finish: Finished with Powder Coating / Anodizing. Min. Max.
The pattern controller is coated matte black to
accent the slot opening. Foam gasket is sealed 12” x 1-Slot 72” x 10 Slots
PRODUCT DIMENTIONS
Neck Size = N
Height = 54mm
20mm 28mm
7mm 16mm
Overall Size
FEATURES:
Frame: The Frame & Blades are made of high quality STYLE DETAILS
extruded Aluminum Profile with advantages of
corrosion resistance and rigidity.
Components: VA-ARLD12 with 12mm Margin, VA-ARLD20 Available Sizes
with 3/4” Slot margin & VA-ARLD25 in One Piece
with 1” Slot margin. Min. Max.
Finish: Finished with Powder Coating / Anodizing.
The pattern controller is coated matte black to 12” x 1-Slot 72” x 10 Slots
PRODUCT DIMENTIONS
Neck Size = N
Height = 54mm
25, 20 or 12
mm 28mm
7mm 16mm
Overall Size
FEATURES:
PRODUCT DIMENTIONS
N = Neck Size
35mm
25mm
VA-RD
ROUND DIFFUSERS
DISC VALVES VALUE AIR
VA-DV NAME OF QUALITY PRODUCTS
FEATURES:
VA-DV
Construcion: Construction This disc valves consist of the valve
ring and central disc.
To guarantee a perfect seat, the valve ring is fitted
with a peripheral sealing strip.
The air volume flow rate is adjusted by rotating the
central disc which alters the size of the gap.
The central disc is held in position with a locknut.
Damper: Round butterfly optional damper having G.I. sheet
construction finished with black enamel paint.
Finish: Finished with Powder Coating / Anodizing.
Foam gasket is sealed around the back of the frame
as option to avoid air leakage.
Reference: Trox Type LVS.
DISC VALVES VALUE AIR
VA-DV NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
Adjustament Screw
38mm
20mm
VA-DV
DISC VALVE
FRESH / EXHAUST AIR LOUVERS VALUE AIR
VA-FAL & VA-EAL NAME OF QUALITY PRODUCTS
FEATURES:
Available Sizes
in One Piece
Min. Max.
6x4 72 x 48
FRESH / EXHAUST AIR LOUVERS VALUE AIR
VA-FAL & VA-EAL NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
2”
VA-FAL
FRESH AIR LOUVER
Bird Screen
2”
VA-EAL
EXHAUST AIR LOUVER
SWIRL DIFFUSERS VALUE AIR
VA-SDH NAME OF QUALITY PRODUCTS
All products in the high capacity swirl diffuser range are suitable for
ceilings up to 15m.
FEATURES:
Construction: The Frame & blades are made of heavy gauge steel
construction for reliable performance
Accessories: Round Butterfly damper is provided as optional.
Finish: Finished with Powder Coating / Anodizing.
Foam gasket is sealed around the back of the frame
as option to avoid air leakage.
Available Sizes
Min. Max.
10 Inch 20 Inch
ALUMINUM MESH FILTERS VALUE AIR
VA-FAF NAME OF QUALITY PRODUCTS
FEATURES:
Available Sizes
Min. Max.
6”x6” —
ALUMINUM MESH FILTERS VALUE AIR
VA-FAF NAME OF QUALITY PRODUCTS
FEATURES:
0.60 (149.40)
2” Thick
0.40 (99.60)
1” Thick
0.20 (49.80)
0.01 (2.49)
200 (1.02)
300 (1.53)
400 (2.03)
500 (2.55)
600 (3.05)
800 (4.06)
Air Velocity in Feet Per Minute (Meters Per Second)
0.10 0.025
Resistance (K.Pa.)
0.05 0.013
0.00 0.00
150/0.76 250/1.27 350/1.78 450/2.29 550/2.79 650/3.30
0.25 0.063
Resistance (In. W.G.)
Resistance (K.Pa.)
0.20 0.050
0.15 0.038
0.10 0.025
0.05 0.013
0.00 0.00
150/0.76 250/1.27 350/1.78 450/2.29 550/2.79 650/3.30
Air Velocity in Feet Per Minute / Meters Per Second
ALUMINUM MESH FILTERS VALUE AIR
VA-FAF NAME OF QUALITY PRODUCTS
The key to the VA-PD diffuser lies in its four individual louver
modules, which are removable and can be easily rotated in
various directions to provide a multitude of pattern
arrangements. The diffusers can be easily set in the field
because the modules are adjustable without the use of tools.
VA-PD Series
FEATURES:
Neck Sizes
Min. Max.
6x6 24 x 24
PERFORATED DIFFUSERS
VA-PD Series VALUE AIR
NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
VA-D: The VA-AP access door panels offer easily, quick and
economical installation wherever duct access is needed.
Manual locks latches assure tight door closure as well as piano-
type hinge models give smooth operation. in VA-APL Access
panels the door can be removed for inspection / maintenance
while VA-APH type panels are hinge type that permits visual
duct inspection without door removal.
FEATURES:
Frame:
>> 22 Gauge Galvanized Steel Sheet VA-APL
Door:
>> Removable Single Skin.
>> Hinged Single Skin.
>> Removable Double Skin.
>> Hinged Double Skin
Hinge:
>> Continuous Piano type.
Locks / Latches:
>> In VA-APL type Doors, 16” and under have two locks,
Doors over 16” have four locks.
>> In VA-APH type doors, 16” and under have one lock VA-APH
and Doors over 16” have two locks.
Seal:
>> Foam Gaskit.
Insulation:
>> 1” thick Fiberglass
Neck Sizes
Installation: Min. Max.
>> Cut hole 2-1/2” smaller than door size.
6x6 24 x 24
ACCESS DOOR PANELS
VA-AP VALUE AIR
NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
Piano Hinge
VA-JD: VA-JD are ideal for commercial use such as concert halls,
theatres, exhibition and sport halls. Jet diffusers are specially suitable
to handle large quantity of air with long throw. Frame and inner rings
are high quality Aluminum construction with the advantages of
corrosion resistance. Jet nozzle section is mounted in
Aluminum square plate covered by flanged border. Nozzles can be
adjusted 30 degree up words and down words to achieve required
VA-JD Series
throw as per site condition. Nozzle jet can be rotated by 360 degree by
(Panel Type)
adjusting the mounting frame. Generally designed for wall
mounting. For ceiling mounting, drill 2 to 4 holes in the face of the
flanged border
FEATURES:
Available from
100 mm dia to 400 mm dia
with the increments of 50 mm
D = Dia of Jet Diffuser in mm
100 150 200 250 300 350 400
JET DIFFUSERS VALUE AIR
VA-JD Series (PANEL TYPE) NAME OF QUALITY PRODUCTS
PRODUCT DIMENTIONS
N=Neck
H (Ø) H
VA-JD
JET DIFFUSERS
NO OF DUCT SIZE
(Ø) E A B
PANELS LxW (IN.)
NO OF DUCT SIZE
(Ø) E A B C
PANELS LxW (IN.)
100 2 390x200 440 250 200
100 3 580x200 630 250 200
H 100 4 790x200 840 250 200
150 2 490x250 540 300 250
150 3 730x250 780 300 250
150 4 990x250 1040 300 250
200 2 590x300 640 350 300
200 3 880x300 930 350 300
W 200 4 1190x300 1240 350 300
250 2 690x350 740 400 350
250 3 1030x350 1080 400 350
250 4 1390x350 1440 400 350
300 2 790x400 840 450 400
300 3 1180x400 1230 450 400
300 4 1590x400 1640 450 400
350 2 890x450 940 500 450
350 3 1330x450 1380 500 450
H 350 4 1770x450 1820 500 450
400 2 990x500 1040 550 500
400 3 1480x500 1530 550 500
400 4 1970x500 2020 550 500
W
EXPANSION JOINTS VALUE AIR
VA-EJ NAME OF QUALITY PRODUCTS
VA-EJ100
FLOOR EXPANSION JOINT
VA-EJ200
WALL EXPANSION JOINT