Professional Documents
Culture Documents
Seotember 21
Seotember 21
Today we continued our DIY. I decided to cut my bracket of footings in my desk and I put it on flywood
using a wood glue and to make it fit there I use deuno nail and also I put a nail where in its not visible to
my diy project so its not look messy when finish I did it both sides and make a perfect box.
I use C-clamp ech sides untill it dry so that its permanent and make it strongly fit to a flywood
While I was waiting until it dry I decided to ask my groupmates how to use the sharpening machine to
sharpen a chisel. I ask jecar to demonstrate how to use that machine and after she demonstrate and
explain how to use it I try it my self. I sharpen 3 chisel for our group so its easy when we aere going to
chisel for our project.
I go back to my diy project and I checked if its dry. I remove all the c clamp and put a sphere tite to the
holes that are visible to my project I also put a sphere tite to those holes that are nails is connected.
Today I learned how to sharpen a chisel using a machine and it should have a desire angle for the chisel
not to be round looking.