Professional Documents
Culture Documents
CALIBRACION
CALIBRACION
CALIBRACION
PSP
The following information describes the service operation of the calibration for the truck payload. The service operation uses the following
-
procedure in order to calibrate the VIMS TPMS:
202 0004
Note: The VIMS TPMS will not operate until a successful payload calibration has been completed.
Security
21: 2 / 0 0 6A
5 / 8
1. This service program code only functions while the service tool (VIMSpc) is connected.
0 1
RE :55- 9 7
2. After the service tool (VIMSpc) is disconnected for 30 seconds, this service program code will no longer be active.
Procedure
©2 N R 0 5
828 :00
1. Ensure that the truck body is empty. Carryback weight will affect the payload measurement.
2. Manually calibrate the payload system by pressing the "OK" button. The "OK" button is located in the Payload Calibration menu option.
0
Cat 2 C 2 4
3. Operate the empty truck to a minimum ground speed of four MPH on hard level ground.
e a
4. Move the transmission gear selector to the neutral position and allow the truck to coast to a stop. Do not use the service brakes or the
retarder.
r
Con pilla terpi
llar
BZZ1-UP, DJS1-UP, DLS1-UP, EED1-UP, EXD1-UP, EYG1-UP, JRP1-UP, JXP1-UP, KDP1-UP, KDZ1-UP, PRB1-UP, RLB1-UP
fide r:
ntia Inc
PSP-000406A8
2022/05/17
21:09:30-05:00
i02564524
lG .
© 2022 Caterpillar Inc.
ree
n
Caterpillar:
Confidential Green