Professional Documents
Culture Documents
Synthetic Enamel - Matt Finish
Synthetic Enamel - Matt Finish
Product description
KAN-ALKO Synthetic Enamel is a tough, enameled finish based on durable alkyd resins and provides good durability and weathering
resistance in general coastal, and mild industrial, environments.
Recommended use
KAN-ALKO Synthetic Enamel is recommended for the protection of suitable prepared and primed steel, galvanized iron, timber or
masonry providing a finish having good resistance to normal weathering. It is typically specified for general factory and plant
maintenance including tank storage facilities, towers, cranes, gantries and process plants. Also used for the decoration and protection
of hospitals, schools, and commercial buildings.
Physical Properties
Page 1 of 3
Issue no:01
Issue date: June,2018
Technical Data Sheet
Surface Preparation
KAN-ALKO Synthetic Enamel Finish is an industrial finish that requires sound preparation for optimum results. Synthetic Enamel alkyd
is designed for application to previously primed and undercoated surfaces typically over Zinc. Remove dirt, dust, grease, oil, salt and
other contaminates from the surface prior to painting. Use hand or power tool clean to a steel surface. Sand and dust should be used
to clean timber surfaces.
Before application of paint, surface is smoothened with a primer.
Application Methods
KAN-ALKO Synthetic Enamel Finish can be applied using roller, brush, conventional or airless spray. Apply an even coat to the
recommended film build using a brush or roller. While using a spray apply one wet coat overlapping the last one by 50%. Standard
equipment such as Graco, Hermex, Binks or others using a 30:1 pump ratio for airless spray can be used.
Application data
Mixing ratio Single Component.
Drying Time
Relative Humidity: 50%
Page 2 of 3
Issue no:01
Issue date: June,2018
Technical Data Sheet
Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away
from sources of heat and ignition. Containers must be kept tightly closed. 6-12 months shelf life.
Handling
Handle with care. Stir well before use.
Packing Size
Available in 3.64 Liter packs.
Certificates
Certificates may be available on request.
Tests
Disclaimer
The information in this document is given to the best of Kansai's knowledge, based on laboratory testing and practical experience. Kansai cannot guarantee anything but the quality of the
product itself. However, as we have no control over the handling, storage, treatment of the product, the standard of surface preparation of the substrate, or other factors affecting the use
of this product, we are not responsible for its performance nor would we accept any liability whatsoever or howsoever arising from the use of this product unless specifically agreed to in
writing by us. Kansai reserves the right to change the given data without further notice.
Page 3 of 3
Issue no:01
Issue date: June,2018