Generador de Funciones - 522621

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

06/05-W97-Sel

Instruction sheet 522 621

Function generator S12 (522 621)

1 Hollow socket for plug-in power supply


2 Frequency adjustment knob
3 Frequency-range selector switch
4 Output-voltage adjustment knob
5 4-mm safety sockets
6 Signal-form selector switch

1 Description 3 Technical data


The function generator S12 supplies sinusoidal, triangular and All over frequency range: 0.05 Hz ... 20 kHz
square wave voltages with adjustable amplitude and fre- Frequency ranges: 0.1 Hz, 1 Hz, 10 Hz, 100 Hz,
quency. It supplies currents up to 1 A. 1 kHz und 2 kHz.
Applications: Range of adjustment: 0.5-10.5 × frequency range
Investigation of mechanical oscillations by electromagnetic Signal form: sinusoidal, symmetric triangu-
and electromotive excitation of springs, cables and strings. lar, squarely
Investigation audio-frequency oscillations and waves by con- Distortion factor (sinusoidal): < 3% bei 1 KHz
necting a loudspeaker.
Pulse duty factor (squarely): 1:1
Investigating characteristics of current and voltage over time in
alternating current circuits (transformer characteristics, induc- Rise time (squarely): 2 µs
tive and capacitive reactance, apparent and real power) Output voltage amplitude: 0-6 V
Frequency and signal dependent experiments on electrical and Max.
electronic components. output current: 1A
Determination of Cp/CV with the gas-elastic resonance appara- Max. output power: 2 W an 8 Ω
tus (371 07) Output: short-circuit proof
Overload: switch-off by means of an
2 Scope of supply electronic thermic protection
safety device; switches on
1 Function generator S12
again automatically after a
1 Plug-in power supply 230 V / 12 V (562 791) short cooling-down period
or
Connection: 4 mm safety sockets
1 Plug-in power supply 115 V / 12 V (562 792)
Supply voltage: 12 V AC
Dimensions: 16 cm x 12 cm x 7 cm
Safety note
Mass: 0,5 kg
• Do not connect any external voltage to output.
4 Operation
- Connect plug in power supply to the hollow socket.
- Set the desired signal form and frequency.
- Adjust frequency and output voltage.

LD Didactic GmbH . Leyboldstrasse 1 . D-50354 Huerth / Germany . Phone (02233) 604-0 . Fax (02233) 604-222 . e-mail: info@ld-didactic.de

by LD Didactic GmbH Printed in the Federal Republic of Germany


Technical alterations reserved

You might also like