Professional Documents
Culture Documents
Saic L 2114 Sfny
Saic L 2114 Sfny
Saic L 2114 Sfny
00 30-Sep-18
SAIC NUMBER DATE APPROVED QR NUMBER
SAUDI ARAMCO INSPECTION CHECKLIST
Inspection of Field Bending for Pipelines SAIC-L-2114 21-Oct-18 BQ-SFNY-SITE-M-
PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR
24"SAFANIYAH A/G HDPE WATER DISPOSAL TRUNKLINE 11-22000-2437 BIN QURAYA LIMITED CO.
EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.
24" SAFANIYA A/G TRUNKLINE 24"X0.875"WT.CS, PIPE METALLIC EXT.FBE N/A N/A G26
LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.
N/A N/A
SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
SAUDI ARAMCO USE ONLY
SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?
SATIP-L-450-03 3.6
SAUDI ARAMCO INSPECTION LEVEL
W
CONTRACTOR INSPECTION LEVEL
H
YES
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A REMARKS
No.
A General Requirements
Composite bends having vertical and horizontal components, the overall SAES-L-450,
A1 bend radius conforms with:
Attachment 1( Appendix B-Table 1 of SAES-L-450) of this checklist. Para. 10.4
SAES-L-450,
A2 Cold wrinkle bends and field hot bends are not permitted.
Para. 10.6
Bends shall not be made closer than 600 mm from the edge of a field SAES-L-450,
A3
circumferential weld. App B, Par. B1.1
SAES-L-450,
A4 Bends are made using a smooth stretch bending machine.
App B, Par. B1.2
Pipe diameter at any point of the preformed bend is not reduced by more SAES-L-450,
A6
than 2-½% of the nominal pipe diameter. App B, Par. B1.1
For internally coated pipe, the bend angle per bite may be reduced to
minimize damage to the coating. (As a minimum, the internal coatings SAES-L-450,
A8
shall withstand the bends as per Attachment 1 of this checklist.) App B, Par. B1.4
Field Bends are free of buckles, dents, cracks, wrinkles, other mechanical
SAES-L-
A9 damage, or indentations. Cold wrinkle bends and field hot bends are not
450,Para.10.6
permitted
Final dimensions (angle, length and radius) of the preformed bends meet Approved
A10
the requirement dictated by actual Site / field measurements. Drawing (IFC)
REMARKS:
REFERENCE DOCUMENTS:
1. SAES-L-450, Construction of On-Land and Near Shore Pipelines, (28 Jan 2018)
2. 01-SAMSS-010, Fabricated Carbon Steel Piping, (9 July 2014)
ATTACHMENTS:
1. Table 1 - Maximum Localized Bends (refer to Item No. A1, A5 & Item No. A8)