Professional Documents
Culture Documents
LTE2115 Dual Transmission Mode 1 Operation
LTE2115 Dual Transmission Mode 1 Operation
DN252184320
Issue 01
This document includes Nokia proprietary and condential information, which may not be
distributed or disclosed to any third parties without the prior written consent of Nokia. This
document is intended for use by Nokia’s customers (“You”/”Your”) in connection with a
product purchased or licensed from any company within Nokia Group of Companies. Use this
document as agreed. You agree to notify Nokia of any errors you may nd in this document;
however, should you elect to use this document for any purpose(s) for which it is not
intended, You understand and warrant that any determinations You may make or actions
You may take will be based upon Your independent judgment and analysis of the content of
this document.
Nokia reserves the right to make changes to this document without notice. At all times, the
controlling version is the one available on Nokia’s site.
NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
ANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE
CONTENT OF THIS DOCUMENT. IN NO EVENT WILL NOKIA BE LIABLE FOR ANY DAMAGES,
INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT,
REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAY ARISE
FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OF
ERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT.
© 2022 Nokia.
With the LTE2115: Dual Transmission Mode 1 Operation feature, it is possible to send
downlink (DL) data via two TX antennas. Its functionality is mainly designed for an indoor
radio planning.
The LTE2115: Dual Transmission Mode 1 Operation feature supports both 2RX MRC and 2Rx
interference rejection combining (IRC) receivers.
With the LTE2115: Dual Transmission Mode 1 Operation feature, it is allowed to connect two
non-overlapping indoor DAS systems to a single 2TX RRH. In addition, the eNB supports a
dual TM1 operation with 2TX/2RX RRHs. Such a transmission can be applied to all eNB
Implementing the dual TM1 transmission twice ensures that all UEs in a cell measure the
reference signal received power (RSRP) properly.
The LTE2115: Dual Transmission Mode 1 Operation feature does not cooperate with the
following features:
4RX or 4TX features
LTE72: 4-way RX Diversity
LTE980: IRC for 4 RX Paths
LTE1691: Uplink Intra-eNB CoMP 4Rx
LTE568: DL Adaptive Closed Loop MIMO (4x2)
carrier aggregation features
LTE1089: Downlink Carrier Aggregation – 20 MHz
LTE1332: Downlink Carrier Aggregation – 40 MHz
LTE1562: Carrier Aggregation for Multi-carrier eNodeBs
LTE1803: Downlink Carrier Aggregation 3 CC – 40 MHz
LTE1804: Downlink Carrier Aggregation 3 CC – 60 MHz
LTE2305: Inter eNodeB Carrier Aggregation for 2 Macro eNodeBs
LTE2233: N-out-of-M Downlink Carrier Aggregation
LTE2007: Inter-eNodeB Carrier Aggregation
LTE FDD super cell features
LTE1542: FDD Supercell
LTE2091: FDD Supercell Extension
high speed users
Impact on interfaces
The LTE2115: Dual Transmission Mode 1 Operation feature impacts interfaces as follows:
Uu
This feature impacts the Uu interface in such a way that the same DL data is
transmitted via both TX antennas.
The LTE2115: Dual Transmission Mode 1 Operation feature has no impact on system
capacity.
For reference data descriptions, see Single RAN System/SRAN Reference Data
Note:
Alarms
There are no alarms related to the LTE2115: Dual Transmission Mode 1 Operation feature.
Parameters
Note:
From LTE17 resourceList is replaced by new MOC CHANNEL. For more information
on new MOC mapping, see LTE3296/SR001527: Harmonized Object Model for SRAN
and LTE feature.
Sales information
For licensing information, see 5G/System Descriptions/5G Licenses. Remember that for 5G
features, you also need to configure the Use Case Level Activation Parameters (UCLAPs). For
more information, see .
See Configuring features with BTS Site Manager or Configuring features with Web Element
Manager for general management tool instructions.
procedure notifications
Activation procedure requires cell locking and BTS restart.
feature interdependencies
The following features must be deactivated before activating the LTE2115: Dual
Transmission Mode 1 Operation feature:
LTE1089: Downlink Carrier Aggregation – 20 MHz
LTE48: Support of High Speed Users
The LTE2115: Dual Transmission Mode 1 Operation feature does not cooperate with the
following features:
4RX or 4TX features
LTE72: 4-way RX Diversity
LTE980: IRC for 4 RX Paths
LTE1691: Uplink Intra-eNB CoMP 4Rx
LTE568: DL Adaptive Closed Loop MIMO (4x2)
carrier aggregation features
LTE1089: Downlink Carrier Aggregation – 20 MHz
LTE1332: Downlink Carrier Aggregation – 40 MHz
LTE1562: Carrier Aggregation for Multi-carrier eNodeBs
LTE1803: Downlink Carrier Aggregation 3 CC – 40 MHz
LTE1804: Downlink Carrier Aggregation 3 CC – 60 MHz
LTE2305: Inter eNodeB Carrier Aggregation for 2 Macro eNodeBs
LTE2233: N-out-of-M Downlink Carrier Aggregation
LTE2007: Inter-eNodeB Carrier Aggregation
LTE FDD super cell features
LTE1542: FDD Supercell
LTE2091: FDD Supercell Extension
high speed users
LTE48: Support of High Speed Users
LTE495: OTDOA
A simultaneous activation of both LTE2115: Dual Transmission Mode 1 Operation and
LTE495: OTDOA can result in an OTDOA positioning accuracy decrease.
2 Start commissioning.
The BTS Site checkbox, located in the Target section, is selected by default.
This is the recommended setting.
3.3 In the MIMO settings section, set the Downlink MIMO mode (dlMimoMode)
parameter value to SingleTX.
3.5 In the Antenna Line Settings page, configure the RTT delay objects.
See Configuring features with BTS Site Manager or Configuring features with Web Element
Manager for general management tool instructions.
procedure notifications
Activation procedure requires cell locking and BTS restart.
feature interdependencies
The following features must be deactivated before activating the LTE2115: Dual
Transmission Mode 1 Operation feature:
LTE1089: Downlink Carrier Aggregation – 20 MHz
LTE48: Support of High Speed Users
The LTE2115: Dual Transmission Mode 1 Operation feature does not cooperate with the
following features:
4RX or 4TX features
LTE72: 4-way RX Diversity
LTE980: IRC for 4 RX Paths
LTE1691: Uplink Intra-eNB CoMP 4Rx
LTE568: DL Adaptive Closed Loop MIMO (4x2)
carrier aggregation features
LTE1089: Downlink Carrier Aggregation – 20 MHz
LTE1332: Downlink Carrier Aggregation – 40 MHz
LTE1562: Carrier Aggregation for Multi-carrier eNodeBs
LTE1803: Downlink Carrier Aggregation 3 CC – 40 MHz
LTE1804: Downlink Carrier Aggregation 3 CC – 60 MHz
LTE2305: Inter eNodeB Carrier Aggregation for 2 Macro eNodeBs
Procedure
1 Go to the Basic Cell Settings page.
4 Go to the LNCEL_FDD
See Configuring features with BTS Site Manager or Configuring features with Web Element
Manager for general management tool instructions.
procedure notifications
Deactivation procedure requires cell locking.
Procedure
1 Go to the Parameter Editor.
2 Go to the LNCEL_FDD
procedure notifications
Deactivation procedure requires cell locking.
Procedure
1 Start the BTS Site Manager application and establish the connection to the BTS.
2 Start commissioning.
The BTS Site checkbox, located in the Target section, is selected by default.
This is the recommended setting.
When commissioning using an XML file, this option is represented as the Activate
1TX in 2TX confguration (act1TxIn2Tx) LNCEL_FDD parameter value
set to false.