Professional Documents
Culture Documents
Term Project Final Report Instruction
Term Project Final Report Instruction
A title page and table of contents are required. The content must include but not be limited
to the following items (you can add items by yourself):
需包含標題頁、目錄、內文。內文需包含但不限於下列項目(可自行增加項目):
II. Practice 實作
Trial casting (Each item may include original design, photos of results, problem
analysis and discussion, and possible correction plans.)
試鑄造(各項內可包含原始設計、成果照片、問題分析與討論以及可能修正方案。)
1. PLA mold printing (may include 3D printing mold design, size, positioning
structure, wax injection port, runner, and other important design explanations.)
模具列印 (可包含 3D 列印模具設計,尺寸、定位結構、射蠟口、流道等重要設計說
明。)
2. Wax injection 射蠟
3. Plaster mold making (may contain design explanations for brackets, runners,
and other related components)
石膏模製作 (可包含支架、流道等設計說明。)
4. Tin alloy casting 鑄造
Casting (Each item may include revised design, photos of results, problem analysis
and discussion, and possible correction plans.)
正式鑄造(各項內可包含修正後設計、成果照片、問題分析與討論以及可能修正方案。)
1. PLA mold printing (may include revised 3D printing mold design, size,
positioning structure, wax injection port, runner and other important design
explanations.)
模具列印 (可包含 3D 列印模具修正後設計,尺寸、定位結構、射蠟口、流道等重要設
計說明。)
2. Wax injection 射蠟
3. Plaster mold making (may contain design explanations for brackets, runners,
and other related components)
石膏模製作 (可包含支架、流道等設計說明。)
4. Wax burnout 燒蠟
5. Tin alloy casting 鑄造