Professional Documents
Culture Documents
Summary Marketing Catalogue DUPLEX Basic EN - 2017 - 01
Summary Marketing Catalogue DUPLEX Basic EN - 2017 - 01
Summary Marketing Catalogue DUPLEX Basic EN - 2017 - 01
COMMERCIAL LINE
DUPLEX BASIC
Leader in ventilation and heat recovery
DUPLEX Basic
The DUPLEX Basic units are compact ventilation units with crossflow heat recovery core. Their perfomance range is between
1.000–15.000 m3/h. They are intended solely for applications that do not come under the field of activity of the committee’s regu-
lation (EU) No. 1253/2014. Ventilation units DUPLEX Basic are equipped with time-proven types of crossflow plastic heat recovery
cores (ATREA K750.F, K750.G and K900.A), which reach up to 75% of heat efficiency with low pressure loss of air. Other important
parts are the new EC fans of the highest quality – the products of the internationally recognized manufacturers EBM-Papst and
Ziehl-Abegg. Since there is the emphasis on saving energy and increasing the unit’s efficiency, it is essential that all the EC fans
throughout the whole product line fulfill the ErP 2015 regulations (according to 327/2011) and they even distinctively exceed it.
DUPLEX Basic units have a unique sandwich casing with outstanding thermal insulation and minimization of thermal bridges,
ATREA was started as a private company in 1990 in the Czech Commercial ventilation
Republic. Very shortly it began to focus on the production – air handling units from 500 – 15 000 mc/h
of ventilation units with waste heat recovery. The company’s
founder has authored many authorship certificates, patents and
industrial designs in this field. Residential ventilation
– air handling units from 180 – 500 mc/h
ATREA’s high quality products started to make their mark also
in the demanding markets of Western Europe. The economic
and geographic proximity led ATREA to focus primarily on the Kitchen ventilation
German market where it has established itself really well as a re-
– whole area ventilation ceilings and kitchen hoods
sult of a good partnership and top-quality products, with the
Netherlands, Switzerland, UK, Italy, Slovenia and other countries
to follow. Passive houses by ATREA
2
DUPLEX Basic / Basic-N / Basic-V
3
DUPLEX
1400–15100 Basic
DUPLEX Basic
Universal indoor version s with floor-standing, under-ceiling and floor-standing flat installation
DUPLEX Basic
performance graph
15100 Basic
12100 Basic
10100 Basic
8100 Basic
7100 Basic
5400 Basic
3400 Basic
2400 Basic
1400 Basic
0 1 000 2 000 3 000 4 000 5 000 6 000 7 000 8 000 9 000 10 000 11 000 12 000 13 000 14 000 15 000 16 000
DUPLEX Basic
DUPLEX Basic
floor-standing version ceiling-suspended version floor-standing flat version
(DUPLEX 1400–15100 Basic) (DUPLEX 1400–8100 Basic) (DUPLEX 1400–8100 Basic)
DUPLEX Basic
dimensions
2 100 mm 455 mm 2 100 mm 455 mm 2 300 mm 580 mm 2 300 mm 665 mm 2 500 mm 885 mm
1 300 mm
1 300 mm
1 450 mm
1 600 mm
1 600 mm
DUPLEX 1400 Basic DUPLEX 2400 Basic DUPLEX 3400 Basic DUPLEX 5400 Basic DUPLEX 7100 Basic
1 600 mm
1795 mm
DUPLEX 8100 Basic DUPLEX 10100 Basic DUPLEX 12100 Basic DUPLEX 15100 Basic
DUPLEX Basic-V
DUPLEX Basic-V
performance graphs
10100 Basic-V
8100 Basic-V
7100 Basic-V
5400 Basic-V
3400 Basic-V
2400 Basic-V
1400 Basic-V
0 1 000 2 000 3 000 4 000 5 000 6 000 7 000 8 000 9 000 10 000 11 000 12 000
DUPLEX Basic-V
DUPLEX Basic-V
upright configuration
DUPLEX Basic-V
dimensions
1600 mm
1600 mm
1600 mm
1600 mm
1600 mm
DUPLEX Basic-N
DUPLEX Basic-N
performance graphs
15100 Basic-N
12100 Basic-N
10100 Basic-N
8100 Basic-N
7100 Basic-N
5400 Basic-N
3400 Basic-N
2400 Basic-N
1400 Basic-N
0 1 000 2 000 3 000 4 000 5 000 6 000 7 000 8 000 9 000 10 000 11 000 12 000 13 000 14 000 15 000 16 000
DUPLEX Basic-N
DUPLEX Basic-N
rooftop configuration (DUPLEX 1400–10100 Basic-N) Base-frame ATREA (DUPLEX 1400–10100 Basic-N)
DUPLEX Basic-N
dimensions
990 1605 mm
1605 mm
1605 mm
770
555
685
2560 mm 2650 mm
1605 mm
1700 mm
1995 mm
1390
1170
1. Three basic lines based on installation – 8. Internet interface as a standard with RD5 control system –
DUPLEX 1400–15100 Basic – floor-standing, under-ceiling ATREA provides its products with internet connection as standard!
or flat configuration Thus no extra expenses are needed. Via its built-in web server the
DUPLEX 1400–10100 Basic-V – upright configuration units can be remotely controlled through the Internet which gives
DUPLEX 1400–15100 Basic-N – rooftop configuration great marketing argument for your customers. (*)
2. Excellent design – the units are designed in a very attractive de- 9. A major decrease in servicing – the standard internet connec-
sign with a continuous emphasis on the maximum level of comfort tion in ATREA units means not only comfort and a remote control
of installers. All the components are easily accessible in the unit. option for the user, but also greatly siplified, more convenient and
significantly cost-saving servicing. All this makes the subsequent
3. Up to 75% heat recovery efficiency – cross-flow exchangers operation of the units vastly cheaper. (*)
ATREA K750.F, K750.G and K900.A enable to achieve great heat re-
covery efficiency thus consequently reduces the energy costs. 10. Smart phones application – ATREA follows the modern
trends and provides application that is iPhone and Android com-
4. 100 % customization – Basic line air handling units follow the patible. Thus a client can control all parameters of ATREA units eas-
business philosophy of multiple variability. Designers can easily ily with his cell-phone. (*)
modify spigot connections, filters, heating, cooling or the position
of the units themselves. Thus this unique variability in construction 11. LCC – life cycle cost programme – innovative help in busi-
gives a competitive advantage because can meet requirements of ness argumentation against cheap low quality units. Easily but on
almost any project. a high-profesional way designed software that will prove economic
return based on the exact calculation.
5. Excellent compactness – one of the biggest ATREA advantag-
es. DUPLEX Basic units are so compact that these enable installa- 12. BMS compatibility – communication with a higher-ranking
tion on spaces with limited installation possibilities. Simply – with system for BMS is a matter of course.
great performance ATREA saves the space.
13. VDI 6022 hygienic design – the unit meets all requirements
6. Integrated heating and cooling – all components are neatly of key certification for hygiene versions under German standard
included in the units so that installation and eventual servising is VDI 6022 that starts being internationally relevant. The Roto units
as easy as possible. can therefore be successful in projects whose specifications require
a helathy, clean and easy to maintenance product.
7. DUPLEX Basic could be installed in various positions – floor-
standing, under-ceiling, floor-standing flat, rooftop or upright.
Heat recovery efficiency up to 75 % 1. Absolute customization – the great variety of possible con-
struction including all needed positions gives a great advantage to
Plastic plate cross-flow heat place the units in any project.
recovery exchangers by ATREA
enable to achieve a great level of 2. Short delivery time – despite the 100 % customization the de-
heat recovery and subsequent livery time is 3 weeks and earlier.
cost savings.
3. Vast reduction in servicing costs – Control via the Internet
enables easy servicing including error message history, firmware
updates and information on the current settings of the unit. As a re-
sult the time costs of the servicing department are vastly reduced.
Circulation / by-pass damper 4. LCC – life cycle cost programme – helps with the reasonable
and exact argumentation in communication with your customers.
Circulation valve used for mixing
exhaust and supply air, by-pass 5. ATREA selection software – All advantages are supported by
damper allows supply of fresh, the company’s major marketing tool – its proprietary design soft-
cold and filtered air to the building. ware to help your clients design HVAC equipment easily, intuitively
and efficiently. At the same time the software is used to efficiently
check various designs for correctness and completion.
e2 i2 e2 i2 e2 i2
i1 e1 i1 e1 i1 e1
větrání s rekuperací cirkulační vytápění větrání bez rekuperace
s dohřevem (s chlazením) nebo chlazení (přes by-pass)
TECHNICAL PARAMETERS
BASIC HAS SEVERAL VARIANTS AND PORT CONFIGURATIONS Servo drives – Top quality Belimo servo drives.
that allow you to choose a unit tailored for each project.
Low noise – Very good acoustic properties of our units can be
defined for various working points in our design software.
Nominal internal operating points of the Basic series: Automatic frost protection – An option to rearrange fan
1400 (300 Pa), 2400 (250 Pa), 3400 (400 Pa), 5400 (200 Pa), operation or the unit can be provided with an EPO-V electrical
7100 (350 Pa), 8100 (200 Pa), 10100 (400 Pa), 12100 (300 Pa), pre-heater (see Accessories).
15100 (300 Pa)
Constant flow – The units can be equipped with accessories
Casing – 30 mm thick PIR (polyisocyanurate) or 45 mm thick supplied to enable constant flow control.
mineral wool sandwich panels ensure great insulation and
acoustic properties. Constant pressure – Basic series units can also be provided
with accessories for a constant pressure mode.
www.atrea.eu
It includes:
Selecting a unit and its accessories
Showing parameters of the selected appliance
An option to adjust the various parameters,
designs or mounting positions of the units
Selecting the control system with accessories in a functional set
Electrical wiring diagrams
Displaying and printing the components installed,
an h-x diagram and HVAC diagrams
Price specifications of individual components
Print output to a printer or PDF
Exporting drawings and diagrams to DXF in 2D or 3D
Sending the design and export by e-mail
Additionally, the design software includes
a full catalogue of ATREA’s products in PDF format.
RE-TPO Control manifolds for hot-water air heaters EPO-V electrical pre-heaters
They are intended to control the heating EPO-V electric pre-heaters that ensure
performance of the hot-water heaters. They frost protection of the heat recovery
always consist of a three-speed pump, two exchanger when equal-pressure ventila-
shut-off ball valves and a three- or four-way tion is permanently required. They are
mixing manifold with a Belimo servo drive. installed in a duct on the fresh air inlet
side of the unit (e1).
OPTIONAL ACCESSORIES
A filter accessory for the easy visualisa- Spare filter cassettes in sizes ac-
tion of current pressure loss of the filters. cording to the type of the unit.
Inclined manometers are mandatory for Supplied with G4, M5 and F7
the hygiene version of the units under class filters.
VDI 6022.
Constant flow
and pressure control
Optional connection of CO2 or rH sensor – max. 2 sensors with a switch or 0–10 V output
CPM controller
Outputs for electric preheater and heater control (pulse 10 V) or hot-water control (0–10 V)
+ Weekly program
M Multiple – Multiple
customized design.
With very short
delivery time
Perfectly isolated Safety switch RD5 control system Integrated heaters Cross-flow heat re-
(class T2) to shut off the power in with internet and and coolers covery exchangers
construction with mini- case of emergency. BMS connection as with aluminium fins with the thermal ef-
mal thermal bridges a standard. and copper tubes. ficiency up to 75 %.
1400–10100 Basic TB1, CPM control system
12100–15100 Basic TB2. with touchscreen
controller.
100 % Summer Condensate drain Air recirculation sec- Base frame High quality servo
by-pass for floor standing instal- tion ensures stable and rigid drives
facility provides a flow lation. with motorized damper. design. enable steady function
of cool, fresh and of by-pass and circula-
filtered air into the tion dampers.
property.
email: export@atrea.eu