Professional Documents
Culture Documents
Duplex R5 en - 2016 - 06
Duplex R5 en - 2016 - 06
touchscreen
display
setting the
modes,
programming
a unit operation
CP Touch controller
Internet access
(as standard)
low voltage cabling
Low-speed circulation
EC fan
A R E S I D E N T I A L
Purpose – higher outputs of the units enable occasional intensive air exhaust or
The new 5th generation of recuperative DUPLEX units is available in two summer ventilation
basic versions, as DUPLEX RB5 in the ceiling design and as DUPLEX – recovery efficiency up to 91 % due to the new-generation counterflow
RA5, RK5 in the upright design. recuperation exchangers
The units are intended for comfort ventilation and warm-air heating of all – excellent thermal insulation parameters of the unit housing with
types of residential and public buildings, are particularly suitable for low- suppression of thermal bridges
energy and passive houses and for flats in block of flats. – built-in by-pass is a standard part of the unit and needs no additional
Basic description space; in addition, due to its construction, it ensures 100% by-pass in the
by-pass mode without mutual thermal transfer
The unit housing, made with mineral insulation with the thickness of 30 – standard control meets all the requirements of control, enabling the wide
mm (U = 0,81 Wm-2K-1), with suppression of thermal bridges and excellent scope of connection of sensors and other inputs, control of shutting and
sound deadening, is fitted with a swirling counterflow plastic heat zone flaps for distribution, control of heaters or the heating system of the
recovery exchanger (efficiency up to 91 %), two ventilators of free house, etc., and furthermore, as standard, includes a built-in web-server
impeller type with the electronic EC control, including control of a constant to enable control via internet
air flow, G4 filters of supply air as well as exhaust air before entering the – universal use from balanced ventilation, ventilation with circulation,
recovery heat exchanger, an automatic by-pass flap, a control module and circulation with heating and cooling
a connection terminal block. Condensate outlets are as standard – option of a built-in type heater: low-temperature water exchanger (T) or
prepared for the cooling version as well. Connection ports are circular, electric exchanger (E).
used for connecting flexible or fixed piping with suppression of thermal – exchanger for direct (CHF) or water (CHW) cooling, option of two sizes -
bridges. Access to the unit is possible through the openable hinged door three-row and five-row
via locking latches.
Units advantages
– fans built-in as standard with an EC type free impeller are
characterized by very low power consumption and excellent speed
regulation
HL 21
min 150
min 150
inlet into
sewer
HL 21
min 150
inlet into
sewer
During the recovery, the heat recovery, moisture condensation occurs A DUPLEX ALFA 5V or a KAPPA 5V unit provides a considerable
during the exhaust air cooling. Water condenses on the walls of the simplification of design and erection works. It is the compact device
heat recovery exchanger, thereby further increasing the heat recovery with an air-water heat pump (4.8 kW) and heating mixing sets
efficiency. In the direction of the exhaust air flow, condensate flows integrated in the DUPLEX RA5 or RK5 unit. Nobody on site is able to
from the recovery heat exchanger and is discharged from the DUPLEX place all in such a small space. Problems with incorrect position of
unit into the sewer system. For the proper function and discharge, it is valves do not take place either, the result is interior equipment –
necessary to separate the unit and the sewer by a siphon with the decoration not only of technical rooms.
sufficient height – min. 150 mm height is recommended. Small
condensate discharge pumps can be used as well.
60
K doors
RM RM RM RM RM
590
460
620
c2
K K K
70
460 107
675
K K
c2
c2 c2 c2
Similarly, this is also possible in port
configurations 11/1, 11/2, 11/3.
RM
1 720
K RM RM RM RM
60
doors
590
460
620
K c2
c2
70
c2 c2
doors
110 900 80 i2 i2
1 c1 c1
K i1 e1 e1 i1
200
0 30/1 31/1
c2 c2 0 port position in design x/0
CHF 1 port position in design x/1 – this is
CHW RM performed on site by turning the fan
K
1 210
UT to a prepared position.
160
160 200
i2 i2
160
c1 c1
i1 e1 e1 i1
DUPLEX RA5
1400 1000
Pressure reserve pst (Pa)
0 0
0 100 200 300 400 500 600 700 800 900 1000 0 100 200 300 400 500
DUPLEX RK5
1200 1200
Pressure reserve pst (Pa)
Pressure reserve pst (Pa)
1000 1000 A
800 800
600 600
400 400
200 200 78 W
172 W
0 0
0 200 400 600 800 1000 1200 1400 1600 0 100 200 300 400 500
Air volume (m3/h) Air volume (m3/h)
Legend: * max. pressure reserve curve is indicated
pressure reserve with G4 filter * ** electrical power consumption of the entire
Qref reference flow ** unit (both fans including the regulation)
Qmax maximum flow ** is indicated at the same flow in the
ventilation mode
7 7
K5
XR
PLE
6 DU 6 RK5
LEX
DUP
5 RA5 5 EX RA5
X UPL
PLE RK5 D
B5 DU LEX B5
DUP XR
Output
Output
4 XR 4 PLE K5
(kW)
(kW)
PLE A5 DU LEX R
DU EX R B5 DUP
DUP
L LEX R
3 EX R
B5 3 A5 DUP
L DUP LEX R
DUP
2 2
1 Cooling output at θi = 26 °C, θc2 = 16 °C, min. 200 m3/h 1 Cooling water +7 °C, min. temperature of supply air of16 °C
Heating output at θi = 22 °C, θc2 = 40 °C, min 200 m3/h Cooling water +12 °C, min. temperature of supply air of 16 °C
0 0
0 200 400 600 800 1000 1200 1400 1600 0 200 400 600 800 1000 1200 1400 1600
Air volume (m3/h) Air volume (m3/h)
8
(kW)
K5
6 7 XR
LEX RA
5 PLE
DUP DU
4 Heating water 6
2 DUPLEX
RB5 +48 °C
RK5
Output
+45 °C A5 LEX
5
(kW)
0 XR B5 DUP
PLE XR
DU PLE
DU
50 4
temperature (°C)
DUPLEX
RA5 +45 °C RB5
LEX
DUP
40 2
DUPLEX
RB5
DUPLEX RK5
35 1 Cooling water +7 °C, min. temperature of supply air of16 °C
Air inlet Cooling water +12 °C, min. temperature of supply air of 16 °C
temperature of +20 °C 0
30 0 200 400 600 800 1000 1200 1400 1600
0 200 400 600 800 1000 1200 1400 31600 3
Air volume (m /h) Air volume (m /h)
CONTROL SYSTEM
RD5 DIGITAL CONTROL SYSTEM
CONTROL AND ENERGY SYSTEMS FOR HEATING AND HOT SERVICE WATER HEATING
RB4
i2 i1 c2
i2 for ventilation and afterheating (without circulation) in the e1
transition period.
e1 i1 Both fans in operation, the mixing flap closed.
RB4
i2
i2 1400 depending on R5 type) m3/h (at 150 Pa) and e1
i1 c2
c1 ventilation output up to 420 / 430 / 445 m3/h (at 150 Pa)
e1 i1 Both fans in operation, the mixing flap mixes outdoor air and
circulating air.
technical WC hall living room
room
RB4
i2 and the bathroom occasionally switches the exhaust fan with c2
c1 an adjustable run-down, an impulse from the kitchen switches
e1 i1 to the mode No. 1 without run-down. If appropriate, ventilation
is periodically switched at a set interval. All of them with
recovery. When mechanical cooling is realised, this mode is technical WC hall living room
also used for heating by means of the air-conditioning unit in room
the transition period (spring, autumn).
Overpressure ventilation mode
Summer season
c2 nv = 0,5 – 2,0 /h-1/ nc = 0 /h-1/
RM The intensive summer overpressure ventilation of
4 residential premises by fully supplying outdoor air,
RB4
c1 ..... inlet of circulation air from rooms to the unit e1 ..... inlet of fresh outdoor air
c2 ..... outlet of heating air, cooling air and fresh air from the unit i1 ..... inlet of effluent air from sanitary facilities to the unit
to rooms i2 ..... outlet of effluent air from the unit
ATREA MODULAR HVAC SYSTEM
DUPLEX R5 UNITS CONTROLLERS
Modification T - water heater Ord. No. A170422 ATREA FG14 (RA5, RK5) Ord. No. A400015
RA5 outdoor condensing unit
Modification T - water heater Ord. No. A170432
ATREA FG18 (RK5)
RB5 Ord. No. A400019
outdoor condensing unit
Modification T - water heater Ord. No. A170442
RK5 DMCH – ATW (FG09) Ord. No. A170511
additional control module
O P T I O N A L AC C E S S O R I E S – WAT E R C O O L E R DMCH – ATW (FG14) Ord. No. A170512
Modification CHW – water additional control module
Ord. No. A170424
cooling RA5, 3-row
DMCH – ATW (FG18) Ord. No. A170513
Modification CHW – water Ord. No. A170425 additional control module
cooling RA5, 5-row
Modification CHW – water Ord. No. A170434 O P T I O N A L A C C E S S O R I E S – E L E C T R I C H E AT E R
cooling RB5, 3-row
Modification E – electric Ord. No. A170423
Modification CHW – water Ord. No. A170437 heater RA5
cooling RB5, 5-row
Modification E – electric Ord. No. A170433
Modification CHW – water Ord. No. A170444 heater RB5
cooling RK5, 3-row
Modification E – electric Ord. No. A170443
Modification CHW – water Ord. No. A170445 heater RK5
cooling RK5, 5-row