Professional Documents
Culture Documents
Crossgame2 Qig (2022)
Crossgame2 Qig (2022)
Crossgame2 Qig (2022)
ULTIMATE GAMING...
CROSSOVER GAMEGAME
GAMING... ON! ON! CROSS GAME2
CROSSgAME
WWW.SPIRITOFGAMER.COM
CROSSGAME 2 NINTENDO SWITCH
DO NOT PLUG
ANYTHING INTO THE
CONTROLLER SOCKET
INSTALLING CROSSGAME 2
Follow the installation steps, below!
Step 1: Connect the adapter to your Nintendo Switch docking station using the included cable. A white LED lights up!
Step 2: Connect your USB wired (or wireless 2.4 GHz) mouse to the adapter. A red LED lights up!
Step 3: Connect your wired (or wireless 2.4 GHz) keyboard to the adapter.A green LED lights up!
Step 4: Activate the adapter by pressing the space bar on your keyboard.
Step 5: Connect your official Nintendo Switch Pro controller to the adapter, using a cable supporting data transfer.
A gold colored LED lights up!
Note: If you want to plug in a headset, please connect it directly to the adapter after your mouse and keyboard have
been connected successfully.
Note: If you want to plug in a headset, please connect it directly to the adapter after your mouse and keyboard have
been connected successfully.
2
CROSSGAME 2 NINTENDO SWITCH
L Q Home ESC
R E
Up W X F
Y R
Left A L3 SHIFT Right D A Space
B C
Down S
Up F1
R3 Wheel Click
Left 1 Right 3
Down 2
Capture
Step 1: Simultaneously press the F11 + F12 keys on your keyboard. A Blue LED lights up! You have activated the key reprogramming mode.
Step 2: Press and hold the button you want to adjust on your controller. Then on your keyboard or mouse, press the button or key you want
to program. Finally, release the button on your controller to validate the reprogramming.
Step 3: To reprogram another button, repeat the above steps. Please note: you can reprogram up to 8 buttons maximum! Simultaneously
press the F11 + F12 keys on your keyboard again to exit button reprogramming mode.
To restore the default settings: Simultaneously press the F1 + F10 + F12 keys for 5 seconds.
Example: You want to reprogram button B on your controller to key T on your keyboard. The steps are as follows: “Simultaneously
press the F11 and F12 keys on your keyboard. Wait for the Blue LED to light up and release the keys. Press and hold button B, don't
release it! Press the T button on your keyboard, then release the B button. Exit reprogramming mode by pressing F11 and F12 on
your keyboard.
Mini Sensitivity (Slow): Hold down F12 + 1 keys for 5 seconds on your keyboard, mouse sensitivity is at minimum
Custom Sensitivity: The sensitivity of the mouse can be adjusted up to 8 different levels. By default, the sensitivity level is set to 4. To increase
the sensitivity by one level, press the F12 + 8 keys.
Max Sensitivity (Fast): Hold down F12 + 8 keys for 5 seconds on your keyboard, mouse sensitivity is at maximum
3
CROSSGAME 2 XBOX 360/ONE
OFF!!!
INSTALLING CROSSGAME 2
Follow the installation steps, below!
Step 1: Connect the adapter to your Xbox One / Xbox 360 console using the included cable. A white LED lights up!
Step 2: Connect your USB wired (or wireless 2.4 GHz) mouse to the adapter. A red LED lights up!
Step 3: Connect your wired (or wireless 2.4 GHz) keyboard to the adapter.A green LED lights up!
Step 4: Connect your official Xbox controller to the adapter, using a cable supporting data transfer. Activate the adapter
by pressing the Home button on your controller.A gold colored LED lights up!
Note: If you want to plug in a headset, please connect it directly to the adapter after your mouse and keyboard
have been connected successfully.
4
CROSSGAME 2 XBOX 360/ONE
LB Q RB E
Up W Y R
X F
Left A L3 SHIFT Right D B C
A Space
Down S
Up F1
Down 2
Step 1: Simultaneously press the F11 + F12 keys on your keyboard. A Blue LED lights up! You have activated the key reprogramming
mode.
Step 2: Press and hold the button you want to adjust on your controller. Then on your keyboard or mouse, press the button or key you want
to program. Finally, release the button on your controller to validate the reprogramming.
Step 3: To reprogram another button, repeat the above steps. Please note: you can reprogram up to 8 buttons maximum! Simultaneously
press the F11 + F12 keys on your keyboard again to exit button reprogramming mode.
To restore the default settings: Simultaneously press the F1 + F10 + F12 keys for 5 seconds.
Example: You want to reprogram button B on your controller to key T on your keyboard. The steps are as follows:
“Simultaneously press the F11 and F12 keys on your keyboard. Wait for the Blue LED to light up and release the keys. Press and
hold button B, don't release it! Press the T button on your keyboard, then release the B button. Exit reprogramming mode by
pressing F11 and F12 on your keyboard.
Mini Sensitivity (Slow): Hold down F12 + 1 keys for 5 seconds on your keyboard, mouse sensitivity is at minimum
Custom Sensitivity: The sensitivity of the mouse can be adjusted up to 8 different levels. By default, the sensitivity level is set to 4.
To increase the sensitivity by one level, press the F12 + 8 keys.
Max Sensitivity (Fast): Hold down F12 + 8 keys for 5 seconds on your keyboard, mouse sensitivity is at maximum
5
CROSSGAME 2 PLAYSTATION 4
OFF!!!
INSTALLING CROSSGAME 2
Follow the installation steps, below!
Step 1: Connect the adapter to your PlayStation 4 console using the included cable. A white LED lights up!
Step 2: Connect your USB wired (or wireless 2.4 GHz) mouse to the adapter. A red LED lights up!
Step 3: Connect your wired (or wireless 2.4 GHz) keyboard to the adapter.A green LED lights up!
Step 4: Connect your official PlayStation 4 controller to the adapter, using a cable supporting data transfer. Activate the
adapter by pressing the Home button on your controller.A gold colored LED lights up!
Note: If you want to plug in a headset, please connect it directly to the adapter after your mouse and keyboard have
been connected successfully.
6
CROSSGAME 2 PLAYSTATION 4
R1 E
L1 Q
Up F1 SHARE OPTION TAB
R
Left 1 Right 3
F
C
Down 2
Space
Up W
Down S
R3 Wheel Click
PS ESC
Step 1: Simultaneously press the F11 + F12 keys on your keyboard. A Blue LED lights up! You have activated the key reprogramming
mode.
Step 2: Press and hold the button you want to adjust on your controller. Then on your keyboard or mouse, press the button or key you want
to program. Finally, release the button on your controller to validate the reprogramming.
Step 3: To reprogram another button, repeat the above steps. Please note: you can reprogram up to 8 buttons maximum! Simultaneously
press the F11 + F12 keys on your keyboard again to exit button reprogramming mode.
To restore the default settings: Simultaneously press the F1 + F10 + F12 keys for 5 seconds.
Example: You want to reprogram button B on your controller to key T on your keyboard. The steps are as follows:
“Simultaneously press the F11 and F12 keys on your keyboard. Wait for the Blue LED to light up and release the keys. Press and
hold button B, don't release it! Press the T button on your keyboard, then release the B button. Exit reprogramming mode by
pressing F11 and F12 on your keyboard.
Mini Sensitivity (Slow): Hold down F12 + 1 keys for 5 seconds on your keyboard, mouse sensitivity is at minimum
Custom Sensitivity: The sensitivity of the mouse can be adjusted up to 8 different levels. By default, the sensitivity level is set to 4. To
increase the sensitivity by one level, press the F12 + 8 keys.
Max Sensitivity (Fast): Hold down F12 + 8 keys for 5 seconds on your keyboard, mouse sensitivity is at maximum
7
CROSSGAME 2 PLAYSTATION 3
OFF!!!
INSTALLING CROSSGAME 2
Follow the installation steps, below!
Step 1: Connect the adapter to your PlayStation 3 console using the included cable. A white LED lights up!
Step 2: Connect your USB wired (or wireless 2.4 GHz) mouse to the adapter. A red LED lights up!
Step 3: Connect your wired (or wireless 2.4 GHz) keyboard to the adapter.A green LED lights up!
Step 4: Connect your official PlayStation 3 controller to the adapter, using a cable supporting data transfer. Activate the
adapter by pressing the Home button on your controller.A gold colored LED lights up!
Note: If you want to plug in a headset, please connect it directly to the adapter after your mouse and keyboard have
been connected successfully.
8
CROSSGAME 2 PLAYSTATION 3
Left 1 Right R
F
C
Down 2
Space
Up W
Down S
PS ESC
Step 1: Simultaneously press the F11 + F12 keys on your keyboard. A Blue LED lights up! You have activated the key reprogramming
mode.
Step 2: Press and hold the button you want to adjust on your controller. Then on your keyboard or mouse, press the button or key you want
to program. Finally, release the button on your controller to validate the reprogramming.
Step 3: To reprogram another button, repeat the above steps. Please note: you can reprogram up to 8 buttons maximum! Simultaneously
press the F11 + F12 keys on your keyboard again to exit button reprogramming mode.
To restore the default settings: Simultaneously press the F1 + F10 + F12 keys for 5 seconds.
Example: You want to reprogram button B on your controller to key T on your keyboard. The steps are as follows:
“Simultaneously press the F11 and F12 keys on your keyboard. Wait for the Blue LED to light up and release the keys. Press and
hold button B, don't release it! Press the T button on your keyboard, then release the B button. Exit reprogramming mode by
pressing F11 and F12 on your keyboard.
Mini Sensitivity (Slow): Hold down F12 + 1 keys for 5 seconds on your keyboard, mouse sensitivity is at minimum
Custom Sensitivity: The sensitivity of the mouse can be adjusted up to 8 different levels. By default, the sensitivity level is set to 4. To
increase the sensitivity by one level, press the F12 + 8 keys.
Max Sensitivity (Fast): Hold down F12 + 8 keys for 5 seconds on your keyboard, mouse sensitivity is at maximum
9
CROSSGAME 2 NINTENDO SWITCH
DO NOT PLUG
ANYTHING INTO THE
CONTROLLER SOCKET
INSTALLATION DE CROSSGAME 2
Respectez les étapes d’installation, ci-dessous !
Etape 1 : Connectez l’adaptateur à votre station d’accueil Nintendo Switch à l’aide du câble inclus. Une LED blanche
s’allume !
Etape 2 : Connectez votre souris filaire USB (ou sans fil 2,4 GHz) à l’adaptateur. Une LED rouge s’allume !
Etape 3 : Connectez votre clavier filaire (ou sans fil 2,4 GHz) à l'adaptateur. Une LED verte s’allume !
Etape 4 : Activez l'adaptateur en appuyant sur la barre espace de votre clavier.
Etape 5 : Connectez votre manette officielle Nintendo Switch Pro à l’adaptateur, à l’aide d’un câble supportant le transfert de
données. Une LED couleur or s’allume !
Note : Si vous souhaitez brancher un casque, veuillez le connecter directement à l'adaptateur après que votre
souris et clavier ont été connectés avec succès.
10
CROSSGAME 2 NINTENDO SWITCH
L Q Home ESC
R E
Up W X F
Y R
Left A L3 SHIFT Right D A Space
B C
Down S
Up F1
R3 Wheel Click
Left 1 Right 3
Down 2
Capture
Etape 1 : Appuyez simultanément sur les touches F11+F12 de votre clavier. Une LED Bleu s’allume ! Vous avez activé le mode
reprogrammation des touches.
Etape 2 : Appuyez et maintenez enfoncé le bouton que vous souhaitez régler sur votre manette. Puis sur votre clavier ou souris, appuyez sur
le bouton ou la touche que vous souhaitez programmer. Enfin, relâchez le bouton de votre manette pour valider la reprogrammation.
Etape 3 : Pour reprogrammer un autre bouton, répétez les étapes ci-dessus. Attention : vous pouvez reprogrammer jusqu'à 8 boutons
maximum ! Appuyez à nouveau simultanément sur les touches F11+F12 de votre clavier pour sortir du mode reprogrammation des boutons.
Pour restaurer les paramètres par défaut : Appuyez simultanément, pendant 5 secondes, sur les touches F1+ F10+F12.
Exemple : Vous souhaitez reprogrammer le bouton B de votre manette sur la touche T de votre clavier. Les étapes sont les
suivantes : « Appuyez simultanément sur les touches F11 et F12 de votre clavier. Attendez que la LED Bleu s’allume et relâchez les
touches. Appuyez et maintenir enfoncé le bouton B, ne le relâchez pas ! Appuyez sur le bouton T de votre clavier, puis le relâchez
le bouton B. Quittez le mode reprogrammation en appuyant sur F11 et F12 de votre clavier.
Sensibilité Mini (Lente) : maintenez les touches F12+1 enfoncées enfoncée pendant 5 secondes sur votre clavier, la sensibilité de la souris
est au minimum
Sensibilité Personnalisée : La sensibilité de la souris peut être ajustée jusqu'à 8 niveaux différents. Par défaut, le niveau de sensibilité est
réglé sur 4. Pour augmenter la sensibilité d’un niveau, appuyez sur les touches F12+8
Sensibilité Max (Rapide) : maintenez les touches F12+8 enfoncées pendant 5 secondes sur votre clavier, la sensibilité de la souris est au
maximum
11
CROSSGAME 2 XBOX 360/ONE
OFF!!!
INSTALLATION DE CROSSGAME 2
Respectez les étapes d’installation, ci-dessous !
Etape 1 : Connectez l’adaptateur à votre console Xbox One / Xbox 360 à l’aide du câble inclus.
Une LED blanche s’allume !
Etape 2 : Connectez votre souris filaire USB (ou sans fil 2,4 GHz) à l’adaptateur. Une LED rouge s’allume !
Etape 3 : Connectez votre clavier filaire (ou sans fil 2,4 GHz) à l'adaptateur. Une LED verte s’allume !
Etape 4 : Connectez votre manette officielle Xbox à l’adaptateur, à l’aide d’un câble supportant le transfert de données.
Activez l'adaptateur en appuyant sur la touche Home de votre manette. Une LED couleur or s’allume !
Note : Si vous souhaitez brancher un casque, veuillez le connecter directement à l'adaptateur après que votre
souris et clavier ont été connectés avec succès.
12
CROSSGAME 2 XBOX 360/ONE
LB Q RB E
Up W Y R
X F
Left A L3 SHIFT Right D B C
A Space
Down S
Up F1
Down 2
Etape 1 : Appuyez simultanément sur les touches F11+F12 de votre clavier. Une LED Bleu s’allume ! Vous avez activé le mode
reprogrammation des touches.
Etape 2 : Appuyez et maintenez enfoncé le bouton que vous souhaitez régler sur votre manette. Puis sur votre clavier ou souris, appuyez
sur le bouton ou la touche que vous souhaitez programmer. Enfin, relâchez le bouton de votre manette pour valider la reprogrammation.
Etape 3 : Pour reprogrammer un autre bouton, répétez les étapes ci-dessus. Attention : vous pouvez reprogrammer jusqu'à 8 boutons
maximum ! Appuyez à nouveau simultanément sur les touches F11+F12 de votre clavier pour sortir du mode reprogrammation des
boutons.
Pour restaurer les paramètres par défaut : Appuyez simultanément, pendant 5 secondes, sur les touches F1+ F10+F12.
Exemple : Vous souhaitez reprogrammer le bouton B de votre manette sur la touche T de votre clavier. Les étapes sont les
suivantes : « Appuyez simultanément sur les touches F11 et F12 de votre clavier. Attendez que la LED Bleu s’allume et relâchez
les touches. Appuyez et maintenir enfoncé le bouton B, ne le relâchez pas ! Appuyez sur le bouton T de votre clavier, puis le
relâchez le bouton B. Quittez le mode reprogrammation en appuyant sur F11 et F12 de votre clavier.
Sensibilité Mini (Lente) : maintenez les touches F12+1 enfoncées enfoncée pendant 5 secondes sur votre clavier, la sensibilité de la souris
est au minimum
Sensibilité Personnalisée : La sensibilité de la souris peut être ajustée jusqu'à 8 niveaux différents. Par défaut, le niveau de sensibilité est
réglé sur 4. Pour augmenter la sensibilité d’un niveau, appuyez sur les touches F12+8
Sensibilité Max (Rapide) : maintenez les touches F12+8 enfoncées pendant 5 secondes sur votre clavier, la sensibilité de la souris est au
maximum
13
CROSSGAME 2 PLAYSTATION 4
OFF!!!
INSTALLATION DE CROSSGAME 2
Respectez les étapes d’installation, ci-dessous !
Etape 1 : Connectez l’adaptateur à votre console PlayStation 4 à l’aide du câble inclus. Une LED blanche s’allume !
Etape 2 : Connectez votre souris filaire USB (ou sans fil 2,4 GHz) à l’adaptateur. Une LED rouge s’allume !
Etape 3 : Connectez votre clavier filaire (ou sans fil 2,4 GHz) à l'adaptateur. Une LED verte s’allume !
Etape 4 : Connectez votre manette officielle PlayStation 4 à l’adaptateur, à l’aide d’un câble supportant le transfert de
données. Activez l'adaptateur en appuyant sur la touche Home de votre manette. Une LED couleur or s’allume !
Note : Si vous souhaitez brancher un casque, veuillez le connecter directement à l'adaptateur après que votre
souris et clavier ont été connectés avec succès
14
CROSSGAME 2 PLAYSTATION 4
R1 E
L1 Q
Up F1 SHARE OPTION TAB
R
Left 1 Right 3
F
C
Down 2
Space
Up W
Down S
R3 Wheel Click
PS ESC
Etape 1 : Appuyez simultanément sur les touches F11+F12 de votre clavier. Une LED Bleu s’allume ! Vous avez activé le mode
reprogrammation des touches.
Etape 2 : Appuyez et maintenez enfoncé le bouton que vous souhaitez régler sur votre manette. Puis sur votre clavier ou souris, appuyez
sur le bouton ou la touche que vous souhaitez programmer. Enfin, relâchez le bouton de votre manette pour valider la reprogrammation.
Etape 3 : Pour reprogrammer un autre bouton, répétez les étapes ci-dessus. Attention : vous pouvez reprogrammer jusqu'à 8 boutons
maximum ! Appuyez à nouveau simultanément sur les touches F11+F12 de votre clavier pour sortir du mode reprogrammation des
boutons.
Pour restaurer les paramètres par défaut : Appuyez simultanément, pendant 5 secondes, sur les touches F1+ F10+F12.
Exemple : Vous souhaitez reprogrammer le bouton B de votre manette sur la touche T de votre clavier. Les étapes sont les
suivantes : « Appuyez simultanément sur les touches F11 et F12 de votre clavier. Attendez que la LED Bleu s’allume et relâchez
les touches. Appuyez et maintenir enfoncé le bouton B, ne le relâchez pas ! Appuyez sur le bouton T de votre clavier, puis le
relâchez le bouton B. Quittez le mode reprogrammation en appuyant sur F11 et F12 de votre clavier.
Sensibilité Mini (Lente) : maintenez les touches F12+1 enfoncées enfoncée pendant 5 secondes sur votre clavier, la sensibilité de la souris
est au minimum
Sensibilité Personnalisée : La sensibilité de la souris peut être ajustée jusqu'à 8 niveaux différents. Par défaut, le niveau de sensibilité est
réglé sur 4. Pour augmenter la sensibilité d’un niveau, appuyez sur les touches F12+8
Sensibilité Max (Rapide) : maintenez les touches F12+8 enfoncées pendant 5 secondes sur votre clavier, la sensibilité de la souris est au
maximum
15
CROSSGAME 2 PLAYSTATION 3
OFF!!!
INSTALLATION DE CROSSGAME 2
Respectez les étapes d’installation, ci-dessous !
Etape 1 : Connectez l’adaptateur à votre console PlayStation 3 à l’aide du câble inclus. Une LED blanche s’allume !
Etape 2 : Connectez votre souris filaire USB (ou sans fil 2,4 GHz) à l’adaptateur. Une LED rouge s’allume !
Etape 3 : Connectez votre clavier filaire (ou sans fil 2,4 GHz) à l'adaptateur. Une LED verte s’allume !
Etape 4 : Connectez votre manette officielle PlayStation 3 à l’adaptateur, à l’aide d’un câble supportant le transfert de
données. Activez l'adaptateur en appuyant sur la touche Home de votre manette. Une LED couleur or s’allume !
Note : Si vous souhaitez brancher un casque, veuillez le connecter directement à l'adaptateur après que votre souris
et clavier ont été connectés avec succès.
16
CROSSGAME 2 PLAYSTATION 3
Left 1 Right R
F
C
Down 2
Space
Up W
Down S
PS ESC
Etape 1 : Appuyez simultanément sur les touches F11+F12 de votre clavier. Une LED Bleu s’allume ! Vous avez activé le mode
reprogrammation des touches.
Etape 2 : Appuyez et maintenez enfoncé le bouton que vous souhaitez régler sur votre manette. Puis sur votre clavier ou souris, appuyez
sur le bouton ou la touche que vous souhaitez programmer. Enfin, relâchez le bouton de votre manette pour valider la reprogrammation.
Etape 3 : Pour reprogrammer un autre bouton, répétez les étapes ci-dessus. Attention : vous pouvez reprogrammer jusqu'à 8 boutons
maximum ! Appuyez à nouveau simultanément sur les touches F11+F12 de votre clavier pour sortir du mode reprogrammation des
boutons.
Pour restaurer les paramètres par défaut : Appuyez simultanément, pendant 5 secondes, sur les touches F1+ F10+F12.
Exemple : Vous souhaitez reprogrammer le bouton B de votre manette sur la touche T de votre clavier. Les étapes sont les
suivantes : « Appuyez simultanément sur les touches F11 et F12 de votre clavier. Attendez que la LED Bleu s’allume et relâchez
les touches. Appuyez et maintenir enfoncé le bouton B, ne le relâchez pas ! Appuyez sur le bouton T de votre clavier, puis le
relâchez le bouton B. Quittez le mode reprogrammation en appuyant sur F11 et F12 de votre clavier.
Sensibilité Mini (Lente) : maintenez les touches F12+1 enfoncées enfoncée pendant 5 secondes sur votre clavier, la sensibilité de la souris
est au minimum
Sensibilité Personnalisée : La sensibilité de la souris peut être ajustée jusqu'à 8 niveaux différents. Par défaut, le niveau de sensibilité est
réglé sur 4. Pour augmenter la sensibilité d’un niveau, appuyez sur les touches F12+8
Sensibilité Max (Rapide) : maintenez les touches F12+8 enfoncées pendant 5 secondes sur votre clavier, la sensibilité de la souris est au
maximum
17
CROSSGAME 2 NINTENDO SWITCH
DO NOT PLUG
ANYTHING INTO THE
CONTROLLER SOCKET
CROSSGAME 2 INSTALLIEREN
Befolgen Sie die folgenden Installationsschritte!
Schritt 1: Verbinden Sie den Adapter mit dem mitgelieferten Kabel mit Ihrer Nintendo Switch-Dockingstation. Eine weiße
LED leuchtet!
Schritt 2: Verbinden Sie Ihre kabelgebundene (oder kabellose 2,4-GHz-USB-Maus) mit dem Adapter. Eine rote LED
leuchtet!
Schritt 3: Verbinden Sie Ihre kabelgebundene (oder kabellose 2,4 GHz) Tastatur mit dem Adapter.Eine grüne LED leuchtet!
Schritt 4: Aktivieren Sie den Adapter, indem Sie die Leertaste auf Ihrer Tastatur drücken.
Schritt 5: Verbinden Sie Ihren offiziellen Nintendo Switch Pro-Controller mit dem Adapter, indem Sie ein Kabel verwenden,
das die Datenübertragung unterstützt. Eine goldfarbene LED leuchtet!
Hinweis: Wenn Sie ein Headset anschließen möchten, schließen Sie es bitte direkt an den Adapter an, nachdem Ihre
Maus und Tastatur erfolgreich angeschlossen wurden.
18
CROSSGAME 2 NINTENDO SWITCH
L Q Home ESC
R E
Up W X F
Y R
Left A L3 SHIFT Right D A Space
B C
Down S
Up F1
R3 Wheel Click
Left 1 Right 3
Down 2
Capture
Schritt 1: Drücken Sie gleichzeitig die Tasten F11 + F12 auf Ihrer Tastatur. Eine blaue LED leuchtet! Sie haben den
Schlüsselumprogrammiermodus aktiviert.
Schritt 2: Halten Sie die Taste auf Ihrem Controller gedrückt, die Sie anpassen möchten. Drücken Sie dann auf Ihrer Tastatur oder Maus die
Taste oder Taste, die Sie programmieren möchten. Lassen Sie abschließend die Taste an Ihrem Controller los, um die Neuprogrammierung
zu bestätigen.
Schritt 3: Um eine weitere Taste neu zu programmieren, wiederholen Sie die obigen Schritte. Bitte beachten: Sie können maximal 8 Tasten
umprogrammieren! Drücken Sie erneut die Tasten F11 + F12 auf Ihrer Tastatur, um den Modus zur Neuprogrammierung der Tasten zu
verlassen.
Um die Standardeinstellungen wiederherzustellen: Drücken Sie gleichzeitig die Tasten F1 + F10 + F12 für 5 Sekunden.
Beispiel: Sie möchten Taste B auf Ihrem Controller auf Taste T auf Ihrer Tastatur umprogrammieren. Die Schritte sind wie folgt:
„Drücken Sie gleichzeitig die Tasten F11 und F12 auf Ihrer Tastatur. Warten Sie, bis die blaue LED aufleuchtet und lassen Sie die
Tasten los. Taste B gedrückt halten, nicht loslassen! Drücken Sie die T-Taste auf Ihrer Tastatur und lassen Sie dann die B-Taste los.
Beenden Sie den Umprogrammierungsmodus, indem Sie F11 und F12 auf Ihrer Tastatur drücken.
Mini-Empfindlichkeit (langsam): Halten Sie die Tasten F12 + 1 5 Sekunden lang auf Ihrer Tastatur gedrückt, die Mausempfindlichkeit ist
minimal
Benutzerdefinierte Empfindlichkeit: Die Empfindlichkeit der Maus kann in bis zu 8 verschiedenen Stufen eingestellt werden. Standardmäßig
ist die Empfindlichkeitsstufe auf 4 eingestellt. Um die Empfindlichkeit um eine Stufe zu erhöhen, drücken Sie die Tasten F12 + 8.
Max. Empfindlichkeit (schnell): Halten Sie F12 + 8 Tasten 5 Sekunden lang auf Ihrer Tastatur gedrückt, die Mausempfindlichkeit ist auf
Maximum
19
CROSSGAME 2 XBOX 360/ONE
OFF!!!
CROSSGAME 2 INSTALLIEREN
Befolgen Sie die folgenden Installationsschritte!
Schritt 1: Verbinden Sie den Adapter über das mitgelieferte Kabel mit Ihrer Xbox One / Xbox 360 Konsole. Eine weiße
LED leuchtet!
Schritt 2: Verbinden Sie Ihre kabelgebundene (oder kabellose 2,4-GHz-USB-Maus) mit dem Adapter. Eine rote LED
leuchtet!
Schritt 3: Verbinden Sie Ihre kabelgebundene (oder kabellose 2,4 GHz) Tastatur mit dem Adapter. Eine grüne LED
leuchtet!
Schritt 4: Verbinden Sie Ihren offiziellen Xbox-Controller mit dem Adapter, indem Sie ein Kabel verwenden, das die
Datenübertragung unterstützt. Aktivieren Sie den Adapter, indem Sie die Home-Taste auf Ihrem Controller drücken. Eine
goldfarbene LED leuchtet!
Hinweis: Wenn Sie ein Headset anschließen möchten, schließen Sie es bitte direkt an den Adapter an, nachdem
Ihre Maus und Tastatur erfolgreich angeschlossen wurden.
20
CROSSGAME 2 XBOX 360/ONE
LB Q RB E
Up W Y R
X F
Left A L3 SHIFT Right D B C
A Space
Down S
Up F1
Down 2
Schritt 1: Drücken Sie gleichzeitig die Tasten F11 + F12 auf Ihrer Tastatur. Eine blaue LED leuchtet! Sie haben den
Schlüsselumprogrammiermodus aktiviert.
Schritt 2: Halten Sie die Taste auf Ihrem Controller gedrückt, die Sie anpassen möchten. Drücken Sie dann auf Ihrer Tastatur oder Maus
die Taste oder Taste, die Sie programmieren möchten. Lassen Sie abschließend die Taste an Ihrem Controller los, um die
Neuprogrammierung zu bestätigen.
Schritt 3: Um eine weitere Taste neu zu programmieren, wiederholen Sie die obigen Schritte. Bitte beachten: Sie können maximal 8 Tasten
umprogrammieren! Drücken Sie erneut die Tasten F11 + F12 auf Ihrer Tastatur, um den Modus zur Neuprogrammierung der Tasten zu
verlassen.
Um die Standardeinstellungen wiederherzustellen: Drücken Sie gleichzeitig die Tasten F1 + F10 + F12 für 5 Sekunden.
Beispiel: Sie möchten Taste B auf Ihrem Controller auf Taste T auf Ihrer Tastatur umprogrammieren. Die Schritte sind wie folgt:
„Drücken Sie gleichzeitig die Tasten F11 und F12 auf Ihrer Tastatur. Warten Sie, bis die blaue LED aufleuchtet und lassen Sie die
Tasten los. Taste B gedrückt halten, nicht loslassen! Drücken Sie die T-Taste auf Ihrer Tastatur und lassen Sie dann die B-Taste
los. Beenden Sie den Umprogrammierungsmodus, indem Sie F11 und F12 auf Ihrer Tastatur drücken.
Mini-Empfindlichkeit (langsam): Halten Sie die Tasten F12 + 1 5 Sekunden lang auf Ihrer Tastatur gedrückt, die Mausempfindlichkeit ist
minimal
Benutzerdefinierte Empfindlichkeit: Die Empfindlichkeit der Maus kann in bis zu 8 verschiedenen Stufen eingestellt werden.
Standardmäßig ist die Empfindlichkeitsstufe auf 4 eingestellt. Um die Empfindlichkeit um eine Stufe zu erhöhen, drücken Sie die Tasten
F12 + 8.
Max. Empfindlichkeit (schnell): Halten Sie F12 + 8 Tasten 5 Sekunden lang auf Ihrer Tastatur gedrückt, die Mausempfindlichkeit ist auf
Maximum
21
CROSSGAME 2 PLAYSTATION 4
OFF!!!
CROSSGAME 2 INSTALLIEREN
Befolgen Sie die folgenden Installationsschritte!
Schritt 1: Verbinden Sie den Adapter mit dem mitgelieferten Kabel mit Ihrer PlayStation 4-Konsole. Eine weiße LED leuchtet!
Schritt 2: Verbinden Sie Ihre kabelgebundene (oder kabellose 2,4-GHz-USB-Maus) mit dem Adapter. Eine rote LED leuchtet!
Schritt 3: Verbinden Sie Ihre kabelgebundene (oder kabellose 2,4 GHz) Tastatur mit dem Adapter.Eine grüne LED leuchtet!
Schritt 4: Verbinden Sie Ihren offiziellen PlayStation 4-Controller mit dem Adapter, indem Sie ein Kabel verwenden, das die
Datenübertragung unterstützt. Aktivieren Sie den Adapter, indem Sie die Home-Taste auf Ihrem Controller drücken.Eine
goldfarbene LED leuchtet!
Hinweis: Wenn Sie ein Headset anschließen möchten, schließen Sie es bitte direkt an den Adapter an, nachdem Ihre
Maus und Tastatur erfolgreich angeschlossen wurden.
22
CROSSGAME 2 PLAYSTATION 4
R1 E
L1 Q
Up F1 SHARE OPTION TAB
R
Left 1 Right 3
F
C
Down 2
Space
Up W
Down S
R3 Wheel Click
PS ESC
Schritt 1: Drücken Sie gleichzeitig die Tasten F11 + F12 auf Ihrer Tastatur. Eine blaue LED leuchtet! Sie haben den
Schlüsselumprogrammiermodus aktiviert.
Schritt 2: Halten Sie die Taste auf Ihrem Controller gedrückt, die Sie anpassen möchten. Drücken Sie dann auf Ihrer Tastatur oder Maus
die Taste oder Taste, die Sie programmieren möchten. Lassen Sie abschließend die Taste an Ihrem Controller los, um die
Neuprogrammierung zu bestätigen.
Schritt 3: Um eine weitere Taste neu zu programmieren, wiederholen Sie die obigen Schritte. Bitte beachten: Sie können maximal 8 Tasten
umprogrammieren! Drücken Sie erneut die Tasten F11 + F12 auf Ihrer Tastatur, um den Modus zur Neuprogrammierung der Tasten zu
verlassen.
Um die Standardeinstellungen wiederherzustellen: Drücken Sie gleichzeitig die Tasten F1 + F10 + F12 für 5 Sekunden.
Beispiel: Sie möchten Taste B auf Ihrem Controller auf Taste T auf Ihrer Tastatur umprogrammieren. Die Schritte sind wie folgt:
„Drücken Sie gleichzeitig die Tasten F11 und F12 auf Ihrer Tastatur. Warten Sie, bis die blaue LED aufleuchtet und lassen Sie die
Tasten los. Taste B gedrückt halten, nicht loslassen! Drücken Sie die T-Taste auf Ihrer Tastatur und lassen Sie dann die B-Taste
los. Beenden Sie den Umprogrammierungsmodus, indem Sie F11 und F12 auf Ihrer Tastatur drücken.
Mini-Empfindlichkeit (langsam): Halten Sie die Tasten F12 + 1 5 Sekunden lang auf Ihrer Tastatur gedrückt, die Mausempfindlichkeit ist
minimal
Benutzerdefinierte Empfindlichkeit: Die Empfindlichkeit der Maus kann in bis zu 8 verschiedenen Stufen eingestellt werden.
Standardmäßig ist die Empfindlichkeitsstufe auf 4 eingestellt. Um die Empfindlichkeit um eine Stufe zu erhöhen, drücken Sie die Tasten
F12 + 8.
Max. Empfindlichkeit (schnell): Halten Sie F12 + 8 Tasten 5 Sekunden lang auf Ihrer Tastatur gedrückt, die Mausempfindlichkeit ist auf
Maximum
23
CROSSGAME 2 PLAYSTATION 3
OFF!!!
CROSSGAME 2 INSTALLIEREN
Befolgen Sie die folgenden Installationsschritte!
Schritt 1: Verbinden Sie den Adapter mit dem mitgelieferten Kabel mit Ihrer PlayStation 3-Konsole. Eine weiße LED leuchtet!
Schritt 2: Verbinden Sie Ihre kabelgebundene (oder kabellose 2,4-GHz-USB-Maus) mit dem Adapter. Eine rote LED leuchtet!
Schritt 3: Verbinden Sie Ihre kabelgebundene (oder kabellose 2,4 GHz) Tastatur mit dem Adapter.Eine grüne LED leuchtet!
Schritt 4: Verbinden Sie Ihren offiziellen PlayStation 3-Controller mit dem Adapter, indem Sie ein Kabel verwenden, das die
Datenübertragung unterstützt. Aktivieren Sie den Adapter, indem Sie die Home-Taste auf Ihrem Controller drücken.Eine
goldfarbene LED leuchtet!
Hinweis: Wenn Sie ein Headset anschließen möchten, schließen Sie es bitte direkt an den Adapter an, nachdem Ihre
Maus und Tastatur erfolgreich angeschlossen wurden.
24
CROSSGAME 2 PLAYSTATION 3
Left 1 Right R
F
C
Down 2
Space
Up W
Down S
PS ESC
Schritt 1: Drücken Sie gleichzeitig die Tasten F11 + F12 auf Ihrer Tastatur. Eine blaue LED leuchtet! Sie haben den
Schlüsselumprogrammiermodus aktiviert.
Schritt 2: Halten Sie die Taste auf Ihrem Controller gedrückt, die Sie anpassen möchten. Drücken Sie dann auf Ihrer Tastatur oder Maus
die Taste oder Taste, die Sie programmieren möchten. Lassen Sie abschließend die Taste an Ihrem Controller los, um die
Neuprogrammierung zu bestätigen.
Schritt 3: Um eine weitere Taste neu zu programmieren, wiederholen Sie die obigen Schritte. Bitte beachten: Sie können maximal 8 Tasten
umprogrammieren! Drücken Sie erneut die Tasten F11 + F12 auf Ihrer Tastatur, um den Modus zur Neuprogrammierung der Tasten zu
verlassen.
Um die Standardeinstellungen wiederherzustellen: Drücken Sie gleichzeitig die Tasten F1 + F10 + F12 für 5 Sekunden.
Beispiel: Sie möchten Taste B auf Ihrem Controller auf Taste T auf Ihrer Tastatur umprogrammieren. Die Schritte sind wie folgt:
„Drücken Sie gleichzeitig die Tasten F11 und F12 auf Ihrer Tastatur. Warten Sie, bis die blaue LED aufleuchtet und lassen Sie die
Tasten los. Taste B gedrückt halten, nicht loslassen! Drücken Sie die T-Taste auf Ihrer Tastatur und lassen Sie dann die B-Taste
los. Beenden Sie den Umprogrammierungsmodus, indem Sie F11 und F12 auf Ihrer Tastatur drücken.
Mini-Empfindlichkeit (langsam): Halten Sie die Tasten F12 + 1 5 Sekunden lang auf Ihrer Tastatur gedrückt, die Mausempfindlichkeit ist
minimal
Benutzerdefinierte Empfindlichkeit: Die Empfindlichkeit der Maus kann in bis zu 8 verschiedenen Stufen eingestellt werden.
Standardmäßig ist die Empfindlichkeitsstufe auf 4 eingestellt. Um die Empfindlichkeit um eine Stufe zu erhöhen, drücken Sie die Tasten
F12 + 8.
Max. Empfindlichkeit (schnell): Halten Sie F12 + 8 Tasten 5 Sekunden lang auf Ihrer Tastatur gedrückt, die Mausempfindlichkeit ist auf
Maximum
25
CROSSGAME 2 NINTENDO SWITCH
DO NOT PLUG
ANYTHING INTO THE
CONTROLLER SOCKET
INSTALLARE CROSSGAME 2
Segui i passaggi di installazione, di seguito!
Passaggio 1: collega l'adattatore alla docking station per Nintendo Switch utilizzando il cavo in dotazione. Si accende un
LED bianco!
Passaggio 2: collega il mouse USB cablato (o wireless a 2,4 GHz) all'adattatore. Si accende un LED rosso!
Passaggio 3: collega la tastiera cablata (o wireless a 2,4 GHz) all'adattatore.Si accende un LED verde!
Passaggio 4: attiva l'adattatore premendo la barra spaziatrice sulla tastiera.
Passaggio 5: collega il tuo controller Nintendo Switch Pro ufficiale all'adattatore, utilizzando un cavo che supporti il
trasferimento dei dati. Si accende un LED color oro!
Nota: se si desidera collegare un auricolare, collegarlo direttamente all'adattatore dopo che il mouse e la tastiera
sono stati collegati correttamente.
26
CROSSGAME 2 NINTENDO SWITCH
L Q Home ESC
R E
Up W X F
Y R
Left A L3 SHIFT Right D A Space
B C
Down S
Up F1
R3 Wheel Click
Left 1 Right 3
Down 2
Capture
Passaggio 1: premi contemporaneamente i tasti F11 + F12 sulla tastiera. Si accende un LED blu! Hai attivato la modalità di riprogrammazione
delle chiavi.
Passaggio 2: tieni premuto il pulsante che desideri regolare sul controller. Quindi, sulla tastiera o sul mouse, premi il pulsante o il tasto che
desideri programmare. Infine, rilascia il pulsante sul controller per convalidare la riprogrammazione.
Passaggio 3: per riprogrammare un altro pulsante, ripetere i passaggi precedenti. Nota: puoi riprogrammare fino a 8 pulsanti al massimo!
Premi di nuovo contemporaneamente i tasti F11 + F12 sulla tastiera per uscire dalla modalità di riprogrammazione dei pulsanti.
Per ripristinare le impostazioni di fabbrica: premere contemporaneamente i tasti F1 + F10 + F12 per 5 secondi.
Esempio: si desidera riprogrammare il pulsante B sul controller sul tasto T sulla tastiera. I passaggi sono i seguenti: “Premi
contemporaneamente i tasti F11 e F12 sulla tastiera. Attendere che il LED Blu si accenda e rilasciare i tasti. Tieni premuto il pulsante
B, non rilasciarlo! Premi il pulsante T sulla tastiera, quindi rilascia il pulsante B. Uscire dalla modalità di riprogrammazione
premendo F11 e F12 sulla tastiera.
Mini sensibilità (lenta): tieni premuti i tasti F12 + 1 per 5 secondi sulla tastiera, la sensibilità del mouse è al minimo
Sensibilità personalizzata: la sensibilità del mouse può essere regolata fino a 8 diversi livelli. Per impostazione predefinita, il livello di
sensibilità è impostato su 4. Per aumentare la sensibilità di un livello, premere i tasti F12 + 8.
Sensibilità massima (veloce): tieni premuti i tasti F12 + 8 per 5 secondi sulla tastiera, la sensibilità del mouse è al massimo
27
CROSSGAME 2 XBOX 360/ONE
OFF!!!
INSTALLARE CROSSGAME 2
Segui i passaggi di installazione, di seguito!
Passaggio 1: collega l'adattatore alla console Xbox One / Xbox 360 utilizzando il cavo incluso. Si accende un LED
bianco!
Passaggio 2: collega il mouse USB cablato (o wireless a 2,4 GHz) all'adattatore. Si accende un LED rosso!
Passaggio 3: collega la tastiera cablata (o wireless a 2,4 GHz) all'adattatore.Si accende un LED verde!
Passaggio 4: collega il controller Xbox ufficiale all'adattatore, utilizzando un cavo che supporti il trasferimento dati. Attiva
l'adattatore premendo il pulsante Home sul controller.Si accende un LED color oro!
Nota: se si desidera collegare un auricolare, collegarlo direttamente all'adattatore dopo che il mouse e la tastiera
sono stati collegati correttamente.
28
CROSSGAME 2 XBOX 360/ONE
LB Q RB E
Up W Y R
X F
Left A L3 SHIFT Right D B C
A Space
Down S
Up F1
Down 2
Passaggio 1: premi contemporaneamente i tasti F11 + F12 sulla tastiera. Si accende un LED blu! Hai attivato la modalità di
riprogrammazione delle chiavi.
Passaggio 2: tieni premuto il pulsante che desideri regolare sul controller. Quindi, sulla tastiera o sul mouse, premi il pulsante o il tasto che
desideri programmare. Infine, rilascia il pulsante sul controller per convalidare la riprogrammazione.
Passaggio 3: per riprogrammare un altro pulsante, ripetere i passaggi precedenti. Nota: puoi riprogrammare fino a 8 pulsanti al massimo!
Premi di nuovo contemporaneamente i tasti F11 + F12 sulla tastiera per uscire dalla modalità di riprogrammazione dei pulsanti.
Per ripristinare le impostazioni di fabbrica: premere contemporaneamente i tasti F1 + F10 + F12 per 5 secondi.
Esempio: si desidera riprogrammare il pulsante B sul controller sul tasto T sulla tastiera. I passaggi sono i seguenti: “Premi
contemporaneamente i tasti F11 e F12 sulla tastiera. Attendere che il LED Blu si accenda e rilasciare i tasti. Tieni premuto il
pulsante B, non rilasciarlo! Premi il pulsante T sulla tastiera, quindi rilascia il pulsante B. Uscire dalla modalità di
riprogrammazione premendo F11 e F12 sulla tastiera.
Mini sensibilità (lenta): tieni premuti i tasti F12 + 1 per 5 secondi sulla tastiera, la sensibilità del mouse è al minimo
Sensibilità personalizzata: la sensibilità del mouse può essere regolata fino a 8 diversi livelli. Per impostazione predefinita, il livello di
sensibilità è impostato su 4. Per aumentare la sensibilità di un livello, premere i tasti F12 + 8.
Sensibilità massima (veloce): tieni premuti i tasti F12 + 8 per 5 secondi sulla tastiera, la sensibilità del mouse è al massimo
29
CROSSGAME 2 PLAYSTATION 4
OFF!!!
INSTALLARE CROSSGAME 2
Segui i passaggi di installazione, di seguito!
Passaggio 1: collega l'adattatore alla tua console PlayStation 4 utilizzando il cavo incluso. Si accende un LED bianco!
Passaggio 2: collega il mouse USB cablato (o wireless a 2,4 GHz) all'adattatore. Si accende un LED rosso!
Passaggio 3: collega la tastiera cablata (o wireless a 2,4 GHz) all'adattatore.Si accende un LED verde!
Passaggio 4: collega il controller ufficiale della PlayStation 4 all'adattatore, utilizzando un cavo che supporti il trasferimento
dei dati. Attiva l'adattatore premendo il pulsante Home sul controller.Si accende un LED color oro!
Nota: se si desidera collegare un auricolare, collegarlo direttamente all'adattatore dopo che il mouse e la tastiera
sono stati collegati correttamente.
30
CROSSGAME 2 PLAYSTATION 4
R1 E
L1 Q
Up F1 SHARE OPTION TAB
R
Left 1 Right 3
F
C
Down 2
Space
Up W
Down S
R3 Wheel Click
PS ESC
Passaggio 1: premi contemporaneamente i tasti F11 + F12 sulla tastiera. Si accende un LED blu! Hai attivato la modalità di
riprogrammazione delle chiavi.
Passaggio 2: tieni premuto il pulsante che desideri regolare sul controller. Quindi, sulla tastiera o sul mouse, premi il pulsante o il tasto che
desideri programmare. Infine, rilascia il pulsante sul controller per convalidare la riprogrammazione.
Passaggio 3: per riprogrammare un altro pulsante, ripetere i passaggi precedenti. Nota: puoi riprogrammare fino a 8 pulsanti al massimo!
Premi di nuovo contemporaneamente i tasti F11 + F12 sulla tastiera per uscire dalla modalità di riprogrammazione dei pulsanti.
Per ripristinare le impostazioni di fabbrica: premere contemporaneamente i tasti F1 + F10 + F12 per 5 secondi.
Esempio: si desidera riprogrammare il pulsante B sul controller sul tasto T sulla tastiera. I passaggi sono i seguenti: “Premi
contemporaneamente i tasti F11 e F12 sulla tastiera. Attendere che il LED Blu si accenda e rilasciare i tasti. Tieni premuto il
pulsante B, non rilasciarlo! Premi il pulsante T sulla tastiera, quindi rilascia il pulsante B. Uscire dalla modalità di
riprogrammazione premendo F11 e F12 sulla tastiera.
Mini sensibilità (lenta): tieni premuti i tasti F12 + 1 per 5 secondi sulla tastiera, la sensibilità del mouse è al minimo
Sensibilità personalizzata: la sensibilità del mouse può essere regolata fino a 8 diversi livelli. Per impostazione predefinita, il livello di
sensibilità è impostato su 4. Per aumentare la sensibilità di un livello, premere i tasti F12 + 8.
Sensibilità massima (veloce): tieni premuti i tasti F12 + 8 per 5 secondi sulla tastiera, la sensibilità del mouse è al massimo
31
CROSSGAME 2 PLAYSTATION 3
OFF!!!
INSTALLARE CROSSGAME 2
Segui i passaggi di installazione, di seguito!
Passaggio 1: collega l'adattatore alla tua console PlayStation 3 utilizzando il cavo incluso. Si accende un LED bianco!
Passaggio 2: collega il mouse USB cablato (o wireless a 2,4 GHz) all'adattatore. Si accende un LED rosso!
Passaggio 3: collega la tastiera cablata (o wireless a 2,4 GHz) all'adattatore.Si accende un LED verde!
Passaggio 4: collega il controller ufficiale della PlayStation 3 all'adattatore, utilizzando un cavo che supporti il trasferimento
dei dati. Attiva l'adattatore premendo il pulsante Home sul controller.Si accende un LED color oro!
Nota: se si desidera collegare un auricolare, collegarlo direttamente all'adattatore dopo che il mouse e la tastiera
sono stati collegati correttamente.
32
CROSSGAME 2 PLAYSTATION 3
Left 1 Right R
F
C
Down 2
Space
Up W
Down S
PS ESC
Passaggio 1: premi contemporaneamente i tasti F11 + F12 sulla tastiera. Si accende un LED blu! Hai attivato la modalità di
riprogrammazione delle chiavi.
Passaggio 2: tieni premuto il pulsante che desideri regolare sul controller. Quindi, sulla tastiera o sul mouse, premi il pulsante o il tasto che
desideri programmare. Infine, rilascia il pulsante sul controller per convalidare la riprogrammazione.
Passaggio 3: per riprogrammare un altro pulsante, ripetere i passaggi precedenti. Nota: puoi riprogrammare fino a 8 pulsanti al massimo!
Premi di nuovo contemporaneamente i tasti F11 + F12 sulla tastiera per uscire dalla modalità di riprogrammazione dei pulsanti.
Per ripristinare le impostazioni di fabbrica: premere contemporaneamente i tasti F1 + F10 + F12 per 5 secondi.
Esempio: si desidera riprogrammare il pulsante B sul controller sul tasto T sulla tastiera. I passaggi sono i seguenti: “Premi
contemporaneamente i tasti F11 e F12 sulla tastiera. Attendere che il LED Blu si accenda e rilasciare i tasti. Tieni premuto il
pulsante B, non rilasciarlo! Premi il pulsante T sulla tastiera, quindi rilascia il pulsante B. Uscire dalla modalità di
riprogrammazione premendo F11 e F12 sulla tastiera.
Mini sensibilità (lenta): tieni premuti i tasti F12 + 1 per 5 secondi sulla tastiera, la sensibilità del mouse è al minimo
Sensibilità personalizzata: la sensibilità del mouse può essere regolata fino a 8 diversi livelli. Per impostazione predefinita, il livello di
sensibilità è impostato su 4. Per aumentare la sensibilità di un livello, premere i tasti F12 + 8.
Sensibilità massima (veloce): tieni premuti i tasti F12 + 8 per 5 secondi sulla tastiera, la sensibilità del mouse è al massimo
33
CROSSGAME 2 NINTENDO SWITCH
DO NOT PLUG
ANYTHING INTO THE
CONTROLLER SOCKET
INSTALACIÓN DE CROSSGAME 2
Siga los pasos de instalación a continuación.
Paso 1: Conecta el adaptador a tu base de conexión de Nintendo Switch usando el cable incluido. ¡Se enciende un LED
blanco!
Paso 2: Conecte su mouse con cable USB (o inalámbrico de 2.4 GHz) al adaptador. ¡Se enciende un LED rojo!
Paso 3: Conecte su teclado con cable (o inalámbrico de 2.4 GHz) al adaptador.¡Se enciende un LED verde!
Paso 4: Active el adaptador presionando la barra espaciadora en su teclado.
Paso 5: Conecte su controlador oficial de Nintendo Switch Pro al adaptador, usando un cable que admita la transferencia
de datos. ¡Se enciende un LED de color dorado!
Nota: Si desea conectar un auricular, conéctelo directamente al adaptador después de que el mouse y el teclado se
hayan conectado correctamente.
34
CROSSGAME 2 NINTENDO SWITCH
L Q Home ESC
R E
Up W X F
Y R
Left A L3 SHIFT Right D A Space
B C
Down S
Up F1
R3 Wheel Click
Left 1 Right 3
Down 2
Capture
Paso 1: Presione simultáneamente las teclas F11 + F12 en su teclado. ¡Se enciende un LED azul! Ha activado el modo de reprogramación
de llaves.
Paso 2: Mantenga presionado el botón que desea ajustar en su controlador. Luego, en su teclado o mouse, presione el botón o tecla que
desea programar. Finalmente, suelte el botón de su controlador para validar la reprogramación.
Paso 3: Para reprogramar otro botón, repita los pasos anteriores. Tenga en cuenta: ¡puede reprogramar hasta 8 botones como máximo!
Presione simultáneamente las teclas F11 + F12 en su teclado nuevamente para salir del modo de reprogramación de botones.
Para restaurar la configuración predeterminada: Presione simultáneamente las teclas F1 + F10 + F12 durante 5 segundos.
Ejemplo: desea reprogramar el botón B en su controlador a la tecla T en su teclado. Los pasos son los siguientes: “Presione
simultáneamente las teclas F11 y F12 en su teclado. Espere a que se encienda el LED azul y suelte las teclas. Mantenga presionado
el botón B, ¡no lo suelte! Presione el botón T en su teclado, luego suelte el botón B. Salga del modo de reprogramación
presionando F11 y F12 en su teclado.
Mini sensibilidad (lenta): mantenga presionadas las teclas F12 + 1 durante 5 segundos en su teclado, la sensibilidad del mouse es mínima
Sensibilidad personalizada: la sensibilidad del mouse se puede ajustar hasta en 8 niveles diferentes. De forma predeterminada, el nivel de
sensibilidad se establece en 4. Para aumentar la sensibilidad en un nivel, presione las teclas F12 + 8.
Sensibilidad máxima (rápida): mantenga presionadas las teclas F12 + 8 durante 5 segundos en su teclado, la sensibilidad del mouse es
máxima
35
CROSSGAME 2 XBOX 360/ONE
OFF!!!
INSTALACIÓN DE CROSSGAME 2
Siga los pasos de instalación a continuación.
Paso 1: Conecte el adaptador a su consola Xbox One / Xbox 360 usando el cable incluido. ¡Se enciende un LED blanco!
Paso 2: Conecte su mouse con cable USB (o inalámbrico de 2.4 GHz) al adaptador. ¡Se enciende un LED rojo!
Paso 3: Conecte su teclado con cable (o inalámbrico de 2.4 GHz) al adaptador.¡Se enciende un LED verde!
Paso 4: Conecte su controlador Xbox oficial al adaptador, usando un cable que admita la transferencia de datos. Active
el adaptador presionando el botón Inicio en su controlador.¡Se enciende un LED de color dorado!
Nota: Si desea conectar un auricular, conéctelo directamente al adaptador después de que el mouse y el teclado
se hayan conectado correctamente.
36
CROSSGAME 2 XBOX 360/ONE
LB Q RB E
Up W Y R
X F
Left A L3 SHIFT Right D B C
A Space
Down S
Up F1
Down 2
Paso 1: Presione simultáneamente las teclas F11 + F12 en su teclado. ¡Se enciende un LED azul! Ha activado el modo de reprogramación
de llaves.
Paso 2: Mantenga presionado el botón que desea ajustar en su controlador. Luego, en su teclado o mouse, presione el botón o tecla que
desea programar. Finalmente, suelte el botón de su controlador para validar la reprogramación.
Paso 3: Para reprogramar otro botón, repita los pasos anteriores. Tenga en cuenta: ¡puede reprogramar hasta 8 botones como máximo!
Presione simultáneamente las teclas F11 + F12 en su teclado nuevamente para salir del modo de reprogramación de botones.
Para restaurar la configuración predeterminada: Presione simultáneamente las teclas F1 + F10 + F12 durante 5 segundos.
Ejemplo: desea reprogramar el botón B en su controlador a la tecla T en su teclado. Los pasos son los siguientes: “Presione
simultáneamente las teclas F11 y F12 en su teclado. Espere a que se encienda el LED azul y suelte las teclas. Mantenga
presionado el botón B, ¡no lo suelte! Presione el botón T en su teclado, luego suelte el botón B. Salga del modo de
reprogramación presionando F11 y F12 en su teclado.
Mini sensibilidad (lenta): mantenga presionadas las teclas F12 + 1 durante 5 segundos en su teclado, la sensibilidad del mouse es mínima
Sensibilidad personalizada: la sensibilidad del mouse se puede ajustar hasta en 8 niveles diferentes. De forma predeterminada, el nivel
de sensibilidad se establece en 4. Para aumentar la sensibilidad en un nivel, presione las teclas F12 + 8.
Sensibilidad máxima (rápida): mantenga presionadas las teclas F12 + 8 durante 5 segundos en su teclado, la sensibilidad del mouse es
máxima
37
CROSSGAME 2 PLAYSTATION 4
OFF!!!
INSTALACIÓN DE CROSSGAME 2
Siga los pasos de instalación a continuación.
Paso 1: Conecte el adaptador a su consola PlayStation 4 usando el cable incluido. ¡Se enciende un LED blanco!
Paso 2: Conecte su mouse con cable USB (o inalámbrico de 2.4 GHz) al adaptador. ¡Se enciende un LED rojo!
Paso 3: Conecte su teclado con cable (o inalámbrico de 2.4 GHz) al adaptador.¡Se enciende un LED verde!
Paso 4: Conecte su controlador oficial de PlayStation 4 al adaptador, usando un cable que admita la transferencia de datos.
Active el adaptador presionando el botón Inicio en su controlador.¡Se enciende un LED de color dorado!
Nota: Si desea conectar un auricular, conéctelo directamente al adaptador después de que el mouse y el teclado se
hayan conectado correctamente.
38
CROSSGAME 2 PLAYSTATION 4
R1 E
L1 Q
Up F1 SHARE OPTION TAB
R
Left 1 Right 3
F
C
Down 2
Space
Up W
Down S
R3 Wheel Click
PS ESC
Paso 1: Presione simultáneamente las teclas F11 + F12 en su teclado. ¡Se enciende un LED azul! Ha activado el modo de reprogramación
de llaves.
Paso 2: Mantenga presionado el botón que desea ajustar en su controlador. Luego, en su teclado o mouse, presione el botón o tecla que
desea programar. Finalmente, suelte el botón de su controlador para validar la reprogramación.
Paso 3: Para reprogramar otro botón, repita los pasos anteriores. Tenga en cuenta: ¡puede reprogramar hasta 8 botones como máximo!
Presione simultáneamente las teclas F11 + F12 en su teclado nuevamente para salir del modo de reprogramación de botones.
Para restaurar la configuración predeterminada: Presione simultáneamente las teclas F1 + F10 + F12 durante 5 segundos.
Ejemplo: desea reprogramar el botón B en su controlador a la tecla T en su teclado. Los pasos son los siguientes: “Presione
simultáneamente las teclas F11 y F12 en su teclado. Espere a que se encienda el LED azul y suelte las teclas. Mantenga
presionado el botón B, ¡no lo suelte! Presione el botón T en su teclado, luego suelte el botón B. Salga del modo de
reprogramación presionando F11 y F12 en su teclado.
Mini sensibilidad (lenta): mantenga presionadas las teclas F12 + 1 durante 5 segundos en su teclado, la sensibilidad del mouse es mínima
Sensibilidad personalizada: la sensibilidad del mouse se puede ajustar hasta en 8 niveles diferentes. De forma predeterminada, el nivel
de sensibilidad se establece en 4. Para aumentar la sensibilidad en un nivel, presione las teclas F12 + 8.
Sensibilidad máxima (rápida): mantenga presionadas las teclas F12 + 8 durante 5 segundos en su teclado, la sensibilidad del mouse es
máxima
39
CROSSGAME 2 PLAYSTATION 3
OFF!!!
INSTALACIÓN DE CROSSGAME 2
Siga los pasos de instalación a continuación.
Paso 1: Conecte el adaptador a su consola PlayStation 3 usando el cable incluido. ¡Se enciende un LED blanco!
Paso 2: Conecte su mouse con cable USB (o inalámbrico de 2.4 GHz) al adaptador. ¡Se enciende un LED rojo!
Paso 3: Conecte su teclado con cable (o inalámbrico de 2.4 GHz) al adaptador.¡Se enciende un LED verde!
Paso 4: Conecte su controlador oficial de PlayStation 3 al adaptador, usando un cable que admita la transferencia de datos.
Active el adaptador presionando el botón Inicio en su controlador.¡Se enciende un LED de color dorado!
Nota: Si desea conectar un auricular, conéctelo directamente al adaptador después de que el mouse y el teclado se
hayan conectado correctamente.
40
CROSSGAME 2 PLAYSTATION 3
Left 1 Right R
F
C
Down 2
Space
Up W
Down S
PS ESC
Paso 1: Presione simultáneamente las teclas F11 + F12 en su teclado. ¡Se enciende un LED azul! Ha activado el modo de reprogramación
de llaves.
Paso 2: Mantenga presionado el botón que desea ajustar en su controlador. Luego, en su teclado o mouse, presione el botón o tecla que
desea programar. Finalmente, suelte el botón de su controlador para validar la reprogramación.
Paso 3: Para reprogramar otro botón, repita los pasos anteriores. Tenga en cuenta: ¡puede reprogramar hasta 8 botones como máximo!
Presione simultáneamente las teclas F11 + F12 en su teclado nuevamente para salir del modo de reprogramación de botones.
Para restaurar la configuración predeterminada: Presione simultáneamente las teclas F1 + F10 + F12 durante 5 segundos.
Ejemplo: desea reprogramar el botón B en su controlador a la tecla T en su teclado. Los pasos son los siguientes: “Presione
simultáneamente las teclas F11 y F12 en su teclado. Espere a que se encienda el LED azul y suelte las teclas. Mantenga
presionado el botón B, ¡no lo suelte! Presione el botón T en su teclado, luego suelte el botón B. Salga del modo de
reprogramación presionando F11 y F12 en su teclado.
Mini sensibilidad (lenta): mantenga presionadas las teclas F12 + 1 durante 5 segundos en su teclado, la sensibilidad del mouse es mínima
Sensibilidad personalizada: la sensibilidad del mouse se puede ajustar hasta en 8 niveles diferentes. De forma predeterminada, el nivel
de sensibilidad se establece en 4. Para aumentar la sensibilidad en un nivel, presione las teclas F12 + 8.
Sensibilidad máxima (rápida): mantenga presionadas las teclas F12 + 8 durante 5 segundos en su teclado, la sensibilidad del mouse es
máxima
41
CROSSGAME 2 NINTENDO SWITCH
DO NOT PLUG
ANYTHING INTO THE
CONTROLLER SOCKET
INSTALANDO CROSSGAME 2
Siga as etapas de instalação abaixo!
Etapa 1: Conecte o adaptador à docking station do Nintendo Switch usando o cabo incluso. Um LED branco acende!
Etapa 2: Conecte o mouse com fio USB (ou sem fio de 2,4 GHz) ao adaptador. Um LED vermelho acende!
Etapa 3: Conecte seu teclado com fio (ou sem fio de 2,4 GHz) ao adaptador.Um LED verde acende!
Etapa 4: ative o adaptador pressionando a barra de espaço do teclado.
Etapa 5: conecte o controlador oficial do Nintendo Switch Pro ao adaptador, usando um cabo que suporte a transferência
de dados. Acende-se um LED dourado!
Observação: se você deseja conectar um fone de ouvido, conecte-o diretamente ao adaptador depois que o mouse
e o teclado forem conectados com sucesso.
42
CROSSGAME 2 NINTENDO SWITCH
L Q Home ESC
R E
Up W X F
Y R
Left A L3 SHIFT Right D A Space
B C
Down S
Up F1
R3 Wheel Click
Left 1 Right 3
Down 2
Capture
Reprogramando as chaves:
Etapa 1: pressione simultaneamente as teclas F11 + F12 no teclado. Um LED azul acende! Você ativou o modo de reprogramação de
teclas.
Etapa 2: pressione e segure o botão que deseja ajustar em seu controlador. Em seguida, no teclado ou mouse, pressione o botão ou tecla
que deseja programar. Finalmente, solte o botão em seu controlador para validar a reprogramação.
Etapa 3: para reprogramar outro botão, repita as etapas acima. Observação: você pode reprogramar até 8 botões no máximo! Pressione
simultaneamente as teclas F11 + F12 em seu teclado novamente para sair do modo de reprogramação de botão.
Para restaurar as configurações padrão: Pressione simultaneamente as teclas F1 + F10 + F12 por 5 segundos.
Exemplo: você deseja reprogramar o botão B em seu controlador para a tecla T em seu teclado. As etapas são as seguintes:
“Pressione simultaneamente as teclas F11 e F12 do teclado. Aguarde que o LED azul acenda e solte as teclas. Pressione e
segure o botão B, não o solte! Pressione o botão T no teclado e, em seguida, solte o botão B. Saia do modo de reprogramação
pressionando F11 e F12 no teclado.
Mini Sensibilidade (Lento): Mantenha pressionadas as teclas F12 + 1 por 5 segundos no teclado, a sensibilidade do mouse é mínima
Sensibilidade personalizada: A sensibilidade do mouse pode ser ajustada em até 8 níveis diferentes. Por padrão, o nível de sensibilidade é
definido como 4. Para aumentar a sensibilidade em um nível, pressione as teclas F12 + 8.
Sensibilidade máxima (rápida): Pressione as teclas F12 + 8 por 5 segundos no teclado, a sensibilidade do mouse está no máximo
43
CROSSGAME 2 XBOX 360/ONE
OFF!!!
INSTALANDO CROSSGAME 2
Siga as etapas de instalação abaixo!
Etapa 1: Conecte o adaptador ao console Xbox One / Xbox 360 usando o cabo incluído. Um LED branco acende!
Etapa 2: Conecte o mouse com fio USB (ou sem fio de 2,4 GHz) ao adaptador. Um LED vermelho acende!
Etapa 3: Conecte seu teclado com fio (ou sem fio de 2,4 GHz) ao adaptador.Um LED verde acende!
Etapa 4: conecte o controlador oficial do Xbox ao adaptador, usando um cabo com suporte para transferência de dados.
Ative o adaptador pressionando o botão Home em seu controlador.Acende-se um LED dourado!
Observação: se você deseja conectar um fone de ouvido, conecte-o diretamente ao adaptador depois que o
mouse e o teclado forem conectados com sucesso.
44
CROSSGAME 2 XBOX 360/ONE
LB Q RB E
Up W Y R
X F
Left A L3 SHIFT Right D B C
A Space
Down S
Up F1
Down 2
Reprogramando as chaves:
Etapa 1: pressione simultaneamente as teclas F11 + F12 no teclado. Um LED azul acende! Você ativou o modo de reprogramação de
teclas.
Etapa 2: pressione e segure o botão que deseja ajustar em seu controlador. Em seguida, no teclado ou mouse, pressione o botão ou tecla
que deseja programar. Finalmente, solte o botão em seu controlador para validar a reprogramação.
Etapa 3: para reprogramar outro botão, repita as etapas acima. Observação: você pode reprogramar até 8 botões no máximo! Pressione
simultaneamente as teclas F11 + F12 em seu teclado novamente para sair do modo de reprogramação de botão.
Para restaurar as configurações padrão: Pressione simultaneamente as teclas F1 + F10 + F12 por 5 segundos.
Exemplo: você deseja reprogramar o botão B em seu controlador para a tecla T em seu teclado. As etapas são as seguintes:
“Pressione simultaneamente as teclas F11 e F12 do teclado. Aguarde que o LED azul acenda e solte as teclas. Pressione e segure
o botão B, não o solte! Pressione o botão T no teclado e, em seguida, solte o botão B. Saia do modo de reprogramação
pressionando F11 e F12 no teclado.
Mini Sensibilidade (Lento): Mantenha pressionadas as teclas F12 + 1 por 5 segundos no teclado, a sensibilidade do mouse é mínima
Sensibilidade personalizada: A sensibilidade do mouse pode ser ajustada em até 8 níveis diferentes. Por padrão, o nível de sensibilidade
é definido como 4. Para aumentar a sensibilidade em um nível, pressione as teclas F12 + 8.
Sensibilidade máxima (rápida): Pressione as teclas F12 + 8 por 5 segundos no teclado, a sensibilidade do mouse está no máximo
45
CROSSGAME 2 PLAYSTATION 4
OFF!!!
INSTALANDO CROSSGAME 2
Siga as etapas de instalação abaixo!
Etapa 1: Conecte o adaptador ao console PlayStation 4 usando o cabo incluído. Um LED branco acende!
Etapa 2: Conecte o mouse com fio USB (ou sem fio de 2,4 GHz) ao adaptador. Um LED vermelho acende!
Etapa 3: Conecte seu teclado com fio (ou sem fio de 2,4 GHz) ao adaptador.Um LED verde acende!
Etapa 4: conecte o controlador oficial do PlayStation 4 ao adaptador, usando um cabo que suporte a transferência de dados.
Ative o adaptador pressionando o botão Home em seu controlador.Acende-se um LED dourado!
Observação: se você deseja conectar um fone de ouvido, conecte-o diretamente ao adaptador depois que o mouse
e o teclado forem conectados com sucesso.
46
CROSSGAME 2 PLAYSTATION 4
R1 E
L1 Q
Up F1 SHARE OPTION TAB
R
Left 1 Right 3
F
C
Down 2
Space
Up W
Down S
R3 Wheel Click
PS ESC
Reprogramando as chaves:
Etapa 1: pressione simultaneamente as teclas F11 + F12 no teclado. Um LED azul acende! Você ativou o modo de reprogramação de
teclas.
Etapa 2: pressione e segure o botão que deseja ajustar em seu controlador. Em seguida, no teclado ou mouse, pressione o botão ou tecla
que deseja programar. Finalmente, solte o botão em seu controlador para validar a reprogramação.
Etapa 3: para reprogramar outro botão, repita as etapas acima. Observação: você pode reprogramar até 8 botões no máximo! Pressione
simultaneamente as teclas F11 + F12 em seu teclado novamente para sair do modo de reprogramação de botão.
Para restaurar as configurações padrão: Pressione simultaneamente as teclas F1 + F10 + F12 por 5 segundos.
Exemplo: você deseja reprogramar o botão B em seu controlador para a tecla T em seu teclado. As etapas são as seguintes:
“Pressione simultaneamente as teclas F11 e F12 do teclado. Aguarde que o LED azul acenda e solte as teclas. Pressione e segure
o botão B, não o solte! Pressione o botão T no teclado e, em seguida, solte o botão B. Saia do modo de reprogramação
pressionando F11 e F12 no teclado.
Mini Sensibilidade (Lento): Mantenha pressionadas as teclas F12 + 1 por 5 segundos no teclado, a sensibilidade do mouse é mínima
Sensibilidade personalizada: A sensibilidade do mouse pode ser ajustada em até 8 níveis diferentes. Por padrão, o nível de sensibilidade
é definido como 4. Para aumentar a sensibilidade em um nível, pressione as teclas F12 + 8.
Sensibilidade máxima (rápida): Pressione as teclas F12 + 8 por 5 segundos no teclado, a sensibilidade do mouse está no máximo
47
CROSSGAME 2 PLAYSTATION 3
OFF!!!
INSTALANDO CROSSGAME 2
Siga as etapas de instalação abaixo!
Etapa 1: Conecte o adaptador ao console PlayStation 3 usando o cabo incluído. Um LED branco acende!
Etapa 2: Conecte o mouse com fio USB (ou sem fio de 2,4 GHz) ao adaptador. Um LED vermelho acende!
Etapa 3: Conecte seu teclado com fio (ou sem fio de 2,4 GHz) ao adaptador.Um LED verde acende!
Etapa 4: conecte o controlador oficial do PlayStation 3 ao adaptador, usando um cabo que suporte a transferência de dados.
Ative o adaptador pressionando o botão Home em seu controlador.Acende-se um LED dourado!!
Observação: se você deseja conectar um fone de ouvido, conecte-o diretamente ao adaptador depois que o mouse
e o teclado forem conectados com sucesso.
48
CROSSGAME 2 PLAYSTATION 3
Left 1 Right R
F
C
Down 2
Space
Up W
Down S
PS ESC
Reprogramando as chaves:
Etapa 1: pressione simultaneamente as teclas F11 + F12 no teclado. Um LED azul acende! Você ativou o modo de reprogramação de
teclas.
Etapa 2: pressione e segure o botão que deseja ajustar em seu controlador. Em seguida, no teclado ou mouse, pressione o botão ou tecla
que deseja programar. Finalmente, solte o botão em seu controlador para validar a reprogramação.
Etapa 3: para reprogramar outro botão, repita as etapas acima. Observação: você pode reprogramar até 8 botões no máximo! Pressione
simultaneamente as teclas F11 + F12 em seu teclado novamente para sair do modo de reprogramação de botão.
Para restaurar as configurações padrão: Pressione simultaneamente as teclas F1 + F10 + F12 por 5 segundos.
Exemplo: você deseja reprogramar o botão B em seu controlador para a tecla T em seu teclado. As etapas são as seguintes:
“Pressione simultaneamente as teclas F11 e F12 do teclado. Aguarde que o LED azul acenda e solte as teclas. Pressione e segure
o botão B, não o solte! Pressione o botão T no teclado e, em seguida, solte o botão B. Saia do modo de reprogramação
pressionando F11 e F12 no teclado.
Mini Sensibilidade (Lento): Mantenha pressionadas as teclas F12 + 1 por 5 segundos no teclado, a sensibilidade do mouse é mínima
Sensibilidade personalizada: A sensibilidade do mouse pode ser ajustada em até 8 níveis diferentes. Por padrão, o nível de sensibilidade
é definido como 4. Para aumentar a sensibilidade em um nível, pressione as teclas F12 + 8.
Sensibilidade máxima (rápida): Pressione as teclas F12 + 8 por 5 segundos no teclado, a sensibilidade do mouse está no máximo
49
CROSSGAME 2 NINTENDO SWITCH
DO NOT PLUG
ANYTHING INTO THE
CONTROLLER SOCKET
A CROSSGAME 2 TELEPÍTÉSE
Kövesse az alábbi telepítési lépéseket!
1. lépés: Csatlakoztassa az adaptert a Nintendo Switch dokkolóállomáshoz a mellékelt kábel segítségével. Fehér LED
világít!
2. lépés: Csatlakoztassa az USB vezetékes (vagy vezeték nélküli 2,4 GHz-es) egeret az adapterhez. Piros LED világít!
3. lépés: Csatlakoztassa vezetékes (vagy vezeték nélküli 2,4 GHz-es) billentyűzetét az adapterhez.Zöld LED világít!
4. lépés: Aktiválja az adaptert a billentyűzet szóköz billentyűjének megnyomásával.
5. lépés: Csatlakoztassa hivatalos Nintendo Switch Pro vezérlőjét az adapterhez adatátvitelt támogató kábel segítségével.
Egy arany színű LED világít!
50
CROSSGAME 2 NINTENDO SWITCH
L Q Home ESC
R E
Up W X F
Y R
Left A L3 SHIFT Right D A Space
B C
Down S
Up F1
R3 Wheel Click
Left 1 Right 3
Down 2
Capture
A kulcsok átprogramozása:
1. lépés: Nyomja meg egyszerre az F11 + F12 billentyűket a billentyűzeten. Kék LED világít! Aktiválta a billentyű újraprogramozási módot.
2. lépés: Nyomja meg és tartsa lenyomva a beállítani kívánt gombot a vezérlőn. Ezután a billentyűzeten vagy az egéren nyomja meg a
programozni kívánt gombot vagy billentyűt. Végül engedje el a vezérlő gombját az újraprogramozás érvényesítéséhez.
3. lépés: Egy másik gomb újraprogramozásához ismételje meg a fenti lépéseket. Figyelem: maximum 8 gombot lehet újraprogramozni!
Egyidejűleg nyomja meg ismét a billentyűzet F11 + F12 billentyűit a gombok újraprogramozási módból való kilépéshez.
Az alapértelmezett beállítások visszaállítása: Nyomja le egyszerre az F1 + F10 + F12 billentyűket 5 másodpercig.
Példa: A vezérlő B gombját át szeretné programozni a billentyűzet T gombjára. A lépések a következők: „Egyszerre nyomja meg az
F11 és az F12 billentyűket a billentyűzeten. Várja meg, amíg a kék LED kigyullad, és engedje el a gombokat. Tartsa nyomva a B
gombot, ne engedje el! Nyomja meg a T gombot a billentyűzeten, majd engedje fel a B gombot. Lépjen ki az újraprogramozási
módból a billentyűzet F11 és F12 billentyűinek megnyomásával.
Mini érzékenység (lassú): tartsa lenyomva az F12 + 1 billentyűket 5 másodpercig a billentyűzeten, az egér érzékenysége minimális
Egyedi érzékenység: Az egér érzékenysége 8 különböző szintig állítható. Alapértelmezés szerint az érzékenységi szint 4. Az érzékenység
egy szinttel történő növeléséhez nyomja meg az F12 + 8 billentyűket.
Maximális érzékenység (gyors): tartsa lenyomva az F12 + 8 billentyűt 5 másodpercig a billentyűzeten, az egér érzékenysége maximális
51
CROSSGAME 2 XBOX 360/ONE
OFF!!!
A CROSSGAME 2 TELEPÍTÉSE
Kövesse az alábbi telepítési lépéseket!
1. lépés: Csatlakoztassa az adaptert az Xbox One/Xbox 360 konzolhoz a mellékelt kábel segítségével. Fehér LED
világít!
2. lépés: Csatlakoztassa az USB vezetékes (vagy vezeték nélküli 2,4 GHz-es) egeret az adapterhez. Piros LED világít!
3. lépés: Csatlakoztassa vezetékes (vagy vezeték nélküli 2,4 GHz-es) billentyűzetét az adapterhez.Zöld LED világít!
4. lépés: Csatlakoztassa hivatalos Xbox-vezérlőjét az adapterhez adatátvitelt támogató kábel segítségével. Aktiválja az
adaptert a vezérlő Kezdőlap gombjának megnyomásával.Egy arany színű LED világít!
52
CROSSGAME 2 XBOX 360/ONE
LB Q RB E
Up W Y R
X F
Left A L3 SHIFT Right D B C
A Space
Down S
Up F1
Down 2
A kulcsok átprogramozása:
1. lépés: Nyomja meg egyszerre az F11 + F12 billentyűket a billentyűzeten. Kék LED világít! Aktiválta a billentyű újraprogramozási módot.
2. lépés: Nyomja meg és tartsa lenyomva a beállítani kívánt gombot a vezérlőn. Ezután a billentyűzeten vagy az egéren nyomja meg a
programozni kívánt gombot vagy billentyűt. Végül engedje el a vezérlő gombját az újraprogramozás érvényesítéséhez.
3. lépés: Egy másik gomb újraprogramozásához ismételje meg a fenti lépéseket. Figyelem: maximum 8 gombot lehet újraprogramozni!
Egyidejűleg nyomja meg ismét a billentyűzet F11 + F12 billentyűit a gombok újraprogramozási módból való kilépéshez.
Az alapértelmezett beállítások visszaállítása: Nyomja le egyszerre az F1 + F10 + F12 billentyűket 5 másodpercig.
Példa: A vezérlő B gombját át szeretné programozni a billentyűzet T gombjára. A lépések a következők: „Egyszerre nyomja meg
az F11 és az F12 billentyűket a billentyűzeten. Várja meg, amíg a kék LED kigyullad, és engedje el a gombokat. Tartsa nyomva a
B gombot, ne engedje el! Nyomja meg a T gombot a billentyűzeten, majd engedje fel a B gombot. Lépjen ki az újraprogramozási
módból a billentyűzet F11 és F12 billentyűinek megnyomásával.
Mini érzékenység (lassú): tartsa lenyomva az F12 + 1 billentyűket 5 másodpercig a billentyűzeten, az egér érzékenysége minimális
Egyedi érzékenység: Az egér érzékenysége 8 különböző szintig állítható. Alapértelmezés szerint az érzékenységi szint 4. Az érzékenység
egy szinttel történő növeléséhez nyomja meg az F12 + 8 billentyűket.
Maximális érzékenység (gyors): tartsa lenyomva az F12 + 8 billentyűt 5 másodpercig a billentyűzeten, az egér érzékenysége maximális
53
CROSSGAME 2 PLAYSTATION 4
OFF!!!
A CROSSGAME 2 TELEPÍTÉSE
Kövesse az alábbi telepítési lépéseket!
1. lépés: Csatlakoztassa az adaptert a PlayStation 4 konzolhoz a mellékelt kábel segítségével. Fehér LED világít!
2. lépés: Csatlakoztassa az USB vezetékes (vagy vezeték nélküli 2,4 GHz-es) egeret az adapterhez. Piros LED világít!
3. lépés: Csatlakoztassa vezetékes (vagy vezeték nélküli 2,4 GHz-es) billentyűzetét az adapterhez.Zöld LED világít!
4. lépés: Csatlakoztassa hivatalos PlayStation 4 kontrollerét az adapterhez adatátvitelt támogató kábel segítségével.
Aktiválja az adaptert a vezérlő Kezdőlap gombjának megnyomásával.Egy arany színű LED világít!
54
CROSSGAME 2 PLAYSTATION 4
R1 E
L1 Q
Up F1 SHARE OPTION TAB
R
Left 1 Right 3
F
C
Down 2
Space
Up W
Down S
R3 Wheel Click
PS ESC
A kulcsok átprogramozása:
1. lépés: Nyomja meg egyszerre az F11 + F12 billentyűket a billentyűzeten. Kék LED világít! Aktiválta a billentyű újraprogramozási módot.
2. lépés: Nyomja meg és tartsa lenyomva a beállítani kívánt gombot a vezérlőn. Ezután a billentyűzeten vagy az egéren nyomja meg a
programozni kívánt gombot vagy billentyűt. Végül engedje el a vezérlő gombját az újraprogramozás érvényesítéséhez.
3. lépés: Egy másik gomb újraprogramozásához ismételje meg a fenti lépéseket. Figyelem: maximum 8 gombot lehet újraprogramozni!
Egyidejűleg nyomja meg ismét a billentyűzet F11 + F12 billentyűit a gombok újraprogramozási módból való kilépéshez.
Az alapértelmezett beállítások visszaállítása: Nyomja le egyszerre az F1 + F10 + F12 billentyűket 5 másodpercig.
Példa: A vezérlő B gombját át szeretné programozni a billentyűzet T gombjára. A lépések a következők: „Egyszerre nyomja meg
az F11 és az F12 billentyűket a billentyűzeten. Várja meg, amíg a kék LED kigyullad, és engedje el a gombokat. Tartsa nyomva a
B gombot, ne engedje el! Nyomja meg a T gombot a billentyűzeten, majd engedje fel a B gombot. Lépjen ki az újraprogramozási
módból a billentyűzet F11 és F12 billentyűinek megnyomásával.
Mini érzékenység (lassú): tartsa lenyomva az F12 + 1 billentyűket 5 másodpercig a billentyűzeten, az egér érzékenysége minimális
Egyedi érzékenység: Az egér érzékenysége 8 különböző szintig állítható. Alapértelmezés szerint az érzékenységi szint 4. Az érzékenység
egy szinttel történő növeléséhez nyomja meg az F12 + 8 billentyűket.
Maximális érzékenység (gyors): tartsa lenyomva az F12 + 8 billentyűt 5 másodpercig a billentyűzeten, az egér érzékenysége maximális
55
CROSSGAME 2 PLAYSTATION 3
OFF!!!
A CROSSGAME 2 TELEPÍTÉSE
Kövesse az alábbi telepítési lépéseket!
1. lépés: Csatlakoztassa az adaptert a PlayStation 3 konzolhoz a mellékelt kábel segítségével. Fehér LED világít!
2. lépés: Csatlakoztassa az USB vezetékes (vagy vezeték nélküli 2,4 GHz-es) egeret az adapterhez. Piros LED világít!
3. lépés: Csatlakoztassa vezetékes (vagy vezeték nélküli 2,4 GHz-es) billentyűzetét az adapterhez.Zöld LED világít!
4. lépés: Csatlakoztassa hivatalos PlayStation 3 kontrollerét az adapterhez adatátvitelt támogató kábel segítségével. Aktiválja
az adaptert a vezérlő Kezdőlap gombjának megnyomásával.Egy arany színű LED világít!
56
CROSSGAME 2 PLAYSTATION 3
Left 1 Right R
F
C
Down 2
Space
Up W
Down S
PS ESC
A kulcsok átprogramozása:
1. lépés: Nyomja meg egyszerre az F11 + F12 billentyűket a billentyűzeten. Kék LED világít! Aktiválta a billentyű újraprogramozási módot.
2. lépés: Nyomja meg és tartsa lenyomva a beállítani kívánt gombot a vezérlőn. Ezután a billentyűzeten vagy az egéren nyomja meg a
programozni kívánt gombot vagy billentyűt. Végül engedje el a vezérlő gombját az újraprogramozás érvényesítéséhez.
3. lépés: Egy másik gomb újraprogramozásához ismételje meg a fenti lépéseket. Figyelem: maximum 8 gombot lehet újraprogramozni!
Egyidejűleg nyomja meg ismét a billentyűzet F11 + F12 billentyűit a gombok újraprogramozási módból való kilépéshez.
Az alapértelmezett beállítások visszaállítása: Nyomja le egyszerre az F1 + F10 + F12 billentyűket 5 másodpercig.
Példa: A vezérlő B gombját át szeretné programozni a billentyűzet T gombjára. A lépések a következők: „Egyszerre nyomja meg
az F11 és az F12 billentyűket a billentyűzeten. Várja meg, amíg a kék LED kigyullad, és engedje el a gombokat. Tartsa nyomva a
B gombot, ne engedje el! Nyomja meg a T gombot a billentyűzeten, majd engedje fel a B gombot. Lépjen ki az újraprogramozási
módból a billentyűzet F11 és F12 billentyűinek megnyomásával.
Mini érzékenység (lassú): tartsa lenyomva az F12 + 1 billentyűket 5 másodpercig a billentyűzeten, az egér érzékenysége minimális
Egyedi érzékenység: Az egér érzékenysége 8 különböző szintig állítható. Alapértelmezés szerint az érzékenységi szint 4. Az érzékenység
egy szinttel történő növeléséhez nyomja meg az F12 + 8 billentyűket.
Maximális érzékenység (gyors): tartsa lenyomva az F12 + 8 billentyűt 5 másodpercig a billentyűzeten, az egér érzékenysége maximális
57
CROSSGAME 2 NINTENDO SWITCH
DO NOT PLUG
ANYTHING INTO THE
CONTROLLER SOCKET
CROSSGAME 2 INSTALLEREN
Volg de installatiestappen hieronder!
Stap 1: Sluit de adapter met de meegeleverde kabel aan op je Nintendo Switch-dockingstation. Een witte LED licht op!
Stap 2: Sluit uw bekabelde (of draadloze 2,4 GHz) USB-muis aan op de adapter. Een rode LED licht op!
Stap 3: Sluit uw bekabelde (of draadloze 2,4 GHz) toetsenbord aan op de adapter.Een groene LED brandt!
Stap 4: Activeer de adapter door op de spatiebalk op je toetsenbord te drukken.
Stap 5: Sluit je officiële Nintendo Switch Pro-controller aan op de adapter met behulp van een kabel die gegevensoverdracht
ondersteunt. Een goudkleurige LED licht op!
Opmerking: als u een headset wilt aansluiten, sluit deze dan rechtstreeks aan op de adapter nadat uw muis en
toetsenbord met succes zijn aangesloten.
58
CROSSGAME 2 NINTENDO SWITCH
L Q Home ESC
R E
Up W X F
Y R
Left A L3 SHIFT Right D A Space
B C
Down S
Up F1
R3 Wheel Click
Left 1 Right 3
Down 2
Capture
De toetsen herprogrammeren:
Stap 1: Druk tegelijkertijd op de F11 + F12-toetsen op uw toetsenbord. Een blauwe LED licht op! U hebt de toetsherprogrammeringsmodus
geactiveerd.
Stap 2: Houd de knop op je controller ingedrukt die je wilt aanpassen. Druk vervolgens op uw toetsenbord of muis op de knop of toets die u
wilt programmeren. Laat ten slotte de knop op uw controller los om de herprogrammering te valideren.
Stap 3: Herhaal de bovenstaande stappen om een andere knop te herprogrammeren. Let op: u kunt maximaal 8 knoppen herprogrammeren!
Druk tegelijkertijd nogmaals op de F11 + F12-toetsen op uw toetsenbord om de herprogrammeringsmodus van de knop te verlaten.
Om de standaardinstellingen te herstellen: Druk tegelijkertijd gedurende 5 seconden op de toetsen F1 + F10 + F12.
Voorbeeld: je wilt knop B op je controller herprogrammeren naar toets T op je toetsenbord. De stappen zijn als volgt: “Druk
tegelijkertijd op de F11- en F12-toetsen op uw toetsenbord. Wacht tot de blauwe LED gaat branden en laat de toetsen los. Houd knop
B ingedrukt, laat hem niet los! Druk op de T-toets op uw toetsenbord en laat vervolgens de B-toets los. Verlaat de
herprogrammeringsmodus door op F11 en F12 op uw toetsenbord te drukken.
Minigevoeligheid (langzaam): Houd de F12 + 1-toetsen 5 seconden ingedrukt op uw toetsenbord, de muisgevoeligheid is minimaal
Aangepaste gevoeligheid: de gevoeligheid van de muis kan worden aangepast tot 8 verschillende niveaus. Het gevoeligheidsniveau is
standaard ingesteld op 4. Om de gevoeligheid met één niveau te verhogen, drukt u op de toetsen F12 + 8.
Maximale gevoeligheid (snel): Houd F12 + 8 toetsen 5 seconden ingedrukt op uw toetsenbord, de muisgevoeligheid is maximaal
59
CROSSGAME 2 XBOX 360/ONE
OFF!!!
CROSSGAME 2 INSTALLEREN
Volg de installatiestappen hieronder!
Stap 1: Sluit de adapter aan op je Xbox One / Xbox 360-console met behulp van de meegeleverde kabel. Een witte LED
licht op!
Stap 2: Sluit uw bekabelde (of draadloze 2,4 GHz) USB-muis aan op de adapter. Een rode LED licht op!
Stap 3: Sluit uw bekabelde (of draadloze 2,4 GHz) toetsenbord aan op de adapter.Een groene LED brandt!
Stap 4: Sluit je officiële Xbox-controller aan op de adapter met behulp van een kabel die gegevensoverdracht
ondersteunt. Activeer de adapter door op de Home-knop op je controller te drukken.Een goudkleurige LED licht op!
Opmerking: als u een headset wilt aansluiten, sluit deze dan rechtstreeks aan op de adapter nadat uw muis en
toetsenbord met succes zijn aangesloten.
60
CROSSGAME 2 XBOX 360/ONE
LB Q RB E
Up W Y R
X F
Left A L3 SHIFT Right D B C
A Space
Down S
Up F1
Down 2
De toetsen herprogrammeren:
Stap 1: Druk tegelijkertijd op de F11 + F12-toetsen op uw toetsenbord. Een blauwe LED licht op! U hebt de toetsherprogrammeringsmodus
geactiveerd.
Stap 2: Houd de knop op je controller ingedrukt die je wilt aanpassen. Druk vervolgens op uw toetsenbord of muis op de knop of toets die
u wilt programmeren. Laat ten slotte de knop op uw controller los om de herprogrammering te valideren.
Stap 3: Herhaal de bovenstaande stappen om een andere knop te herprogrammeren. Let op: u kunt maximaal 8 knoppen
herprogrammeren! Druk tegelijkertijd nogmaals op de F11 + F12-toetsen op uw toetsenbord om de herprogrammeringsmodus van de knop
te verlaten.
Om de standaardinstellingen te herstellen: Druk tegelijkertijd gedurende 5 seconden op de toetsen F1 + F10 + F12.
Voorbeeld: je wilt knop B op je controller herprogrammeren naar toets T op je toetsenbord. De stappen zijn als volgt: “Druk
tegelijkertijd op de F11- en F12-toetsen op uw toetsenbord. Wacht tot de blauwe LED gaat branden en laat de toetsen los. Houd
knop B ingedrukt, laat hem niet los! Druk op de T-toets op uw toetsenbord en laat vervolgens de B-toets los. Verlaat de
herprogrammeringsmodus door op F11 en F12 op uw toetsenbord te drukken.
Minigevoeligheid (langzaam): Houd de F12 + 1-toetsen 5 seconden ingedrukt op uw toetsenbord, de muisgevoeligheid is minimaal
Aangepaste gevoeligheid: de gevoeligheid van de muis kan worden aangepast tot 8 verschillende niveaus. Het gevoeligheidsniveau is
standaard ingesteld op 4. Om de gevoeligheid met één niveau te verhogen, drukt u op de toetsen F12 + 8.
Maximale gevoeligheid (snel): Houd F12 + 8 toetsen 5 seconden ingedrukt op uw toetsenbord, de muisgevoeligheid is maximaal
61
CROSSGAME 2 PLAYSTATION 4
OFF!!!
CROSSGAME 2 INSTALLEREN
Volg de installatiestappen hieronder!
Stap 1: Sluit de adapter aan op je PlayStation 4-console met behulp van de meegeleverde kabel. Een witte LED licht op!
Stap 2: Sluit uw bekabelde (of draadloze 2,4 GHz) USB-muis aan op de adapter. Een rode LED licht op!
Stap 3: Sluit uw bekabelde (of draadloze 2,4 GHz) toetsenbord aan op de adapter.Een groene LED brandt!
Stap 4: Sluit je officiële PlayStation 4-controller aan op de adapter met behulp van een kabel die gegevensoverdracht
ondersteunt. Activeer de adapter door op de Home-knop op je controller te drukken.Een goudkleurige LED licht op!
Opmerking: als u een headset wilt aansluiten, sluit deze dan rechtstreeks aan op de adapter nadat uw muis en
toetsenbord met succes zijn aangesloten.
62
CROSSGAME 2 PLAYSTATION 4
R1 E
L1 Q
Up F1 SHARE OPTION TAB
R
Left 1 Right 3
F
C
Down 2
Space
Up W
Down S
R3 Wheel Click
PS ESC
De toetsen herprogrammeren:
Stap 1: Druk tegelijkertijd op de F11 + F12-toetsen op uw toetsenbord. Een blauwe LED licht op! U hebt de toetsherprogrammeringsmodus
geactiveerd.
Stap 2: Houd de knop op je controller ingedrukt die je wilt aanpassen. Druk vervolgens op uw toetsenbord of muis op de knop of toets die
u wilt programmeren. Laat ten slotte de knop op uw controller los om de herprogrammering te valideren.
Stap 3: Herhaal de bovenstaande stappen om een andere knop te herprogrammeren. Let op: u kunt maximaal 8 knoppen
herprogrammeren! Druk tegelijkertijd nogmaals op de F11 + F12-toetsen op uw toetsenbord om de herprogrammeringsmodus van de knop
te verlaten.
Om de standaardinstellingen te herstellen: Druk tegelijkertijd gedurende 5 seconden op de toetsen F1 + F10 + F12.
Voorbeeld: je wilt knop B op je controller herprogrammeren naar toets T op je toetsenbord. De stappen zijn als volgt: “Druk
tegelijkertijd op de F11- en F12-toetsen op uw toetsenbord. Wacht tot de blauwe LED gaat branden en laat de toetsen los. Houd
knop B ingedrukt, laat hem niet los! Druk op de T-toets op uw toetsenbord en laat vervolgens de B-toets los. Verlaat de
herprogrammeringsmodus door op F11 en F12 op uw toetsenbord te drukken.
Minigevoeligheid (langzaam): Houd de F12 + 1-toetsen 5 seconden ingedrukt op uw toetsenbord, de muisgevoeligheid is minimaal
Aangepaste gevoeligheid: de gevoeligheid van de muis kan worden aangepast tot 8 verschillende niveaus. Het gevoeligheidsniveau is
standaard ingesteld op 4. Om de gevoeligheid met één niveau te verhogen, drukt u op de toetsen F12 + 8.
Maximale gevoeligheid (snel): Houd F12 + 8 toetsen 5 seconden ingedrukt op uw toetsenbord, de muisgevoeligheid is maximaal
63
CROSSGAME 2 PLAYSTATION 3
OFF!!!
CROSSGAME 2 INSTALLEREN
Volg de installatiestappen hieronder!
Stap 1: Sluit de adapter aan op je PlayStation 3-console met behulp van de meegeleverde kabel. Een witte LED licht op!
Stap 2: Sluit uw bekabelde (of draadloze 2,4 GHz) USB-muis aan op de adapter. Een rode LED licht op!
Stap 3: Sluit uw bekabelde (of draadloze 2,4 GHz) toetsenbord aan op de adapter.Een groene LED brandt!
Stap 4: Sluit je officiële PlayStation 3-controller aan op de adapter met behulp van een kabel die gegevensoverdracht
ondersteunt. Activeer de adapter door op de Home-knop op je controller te drukken.Een goudkleurige LED licht op!
Opmerking: als u een headset wilt aansluiten, sluit deze dan rechtstreeks aan op de adapter nadat uw muis en
toetsenbord met succes zijn aangesloten.
64
CROSSGAME 2 PLAYSTATION 3
Left 1 Right R
F
C
Down 2
Space
Up W
Down S
PS ESC
De toetsen herprogrammeren:
Stap 1: Druk tegelijkertijd op de F11 + F12-toetsen op uw toetsenbord. Een blauwe LED licht op! U hebt de toetsherprogrammeringsmodus
geactiveerd.
Stap 2: Houd de knop op je controller ingedrukt die je wilt aanpassen. Druk vervolgens op uw toetsenbord of muis op de knop of toets die
u wilt programmeren. Laat ten slotte de knop op uw controller los om de herprogrammering te valideren.
Stap 3: Herhaal de bovenstaande stappen om een andere knop te herprogrammeren. Let op: u kunt maximaal 8 knoppen
herprogrammeren! Druk tegelijkertijd nogmaals op de F11 + F12-toetsen op uw toetsenbord om de herprogrammeringsmodus van de knop
te verlaten.
Om de standaardinstellingen te herstellen: Druk tegelijkertijd gedurende 5 seconden op de toetsen F1 + F10 + F12.
Voorbeeld: je wilt knop B op je controller herprogrammeren naar toets T op je toetsenbord. De stappen zijn als volgt: “Druk
tegelijkertijd op de F11- en F12-toetsen op uw toetsenbord. Wacht tot de blauwe LED gaat branden en laat de toetsen los. Houd
knop B ingedrukt, laat hem niet los! Druk op de T-toets op uw toetsenbord en laat vervolgens de B-toets los. Verlaat de
herprogrammeringsmodus door op F11 en F12 op uw toetsenbord te drukken.
Minigevoeligheid (langzaam): Houd de F12 + 1-toetsen 5 seconden ingedrukt op uw toetsenbord, de muisgevoeligheid is minimaal
Aangepaste gevoeligheid: de gevoeligheid van de muis kan worden aangepast tot 8 verschillende niveaus. Het gevoeligheidsniveau is
standaard ingesteld op 4. Om de gevoeligheid met één niveau te verhogen, drukt u op de toetsen F12 + 8.
Maximale gevoeligheid (snel): Houd F12 + 8 toetsen 5 seconden ingedrukt op uw toetsenbord, de muisgevoeligheid is maximaal
65