D0A41411B - Legacyui - Readme - TXT (2019/03/06 13:44:19)

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 252

========================================================================

*** Basic Information ***


========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] LegacyUI
------------------------------------------------------------------------
[Version] 1.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(ja,en,f,e,d,i,nl,s,n,dk,sf,p,pl,h,cz,ru,sc,tc,kr,br,tr,ca,gr)
[Firmware No.] D0A41411B
[File Information]
File Name D0A41411B.zip
File Type Module for Service
Size 11.42 MB ( 11969685 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41411B_LegacyUI_readme.txt[2019/03/06 13:44:19]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41411B_LegacyUI_readme.txt[2019/03/06 13:44:19]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/17
------------------------------------------------------------------------
[Program Name] LanguageWidget
------------------------------------------------------------------------
[Version] 1.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41413B
[File Information]
File Name D0A41413B.zip
File Type Module for Service
Size 0.20 MB ( 207240 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

D0A41413B_LanguageWidget_readme.txt[2019/11/25 11:21:34]
Symptom corrected:
- The language displayed on the operation panel might be different
from the language set in the "Change Language" widget.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.01
Rank D

1st Mass production

D0A41413B_LanguageWidget_readme.txt[2019/11/25 11:21:34]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/04
------------------------------------------------------------------------
[Program Name] TonnerWidget
------------------------------------------------------------------------
[Version] 1.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41414B
[File Information]
File Name D0A41414B.zip
File Type Module for Service
Size 0.60 MB ( 624914 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41414B_TonnerWidget_readme.txt[2019/03/06 13:44:18]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41414B_TonnerWidget_readme.txt[2019/03/06 13:44:18]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] FaxInfoWidget
------------------------------------------------------------------------
[Version] 1.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41415A
[File Information]
File Name D0A41415A.zip
File Type Module for Service
Size 0.25 MB ( 266556 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41415A_FaxInfoWidget_readme.txt[2019/03/06 13:44:15]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41415A_FaxInfoWidget_readme.txt[2019/03/06 13:44:15]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/04
------------------------------------------------------------------------
[Program Name] StopKeyWidget
------------------------------------------------------------------------
[Version] 300.04.1
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Experimental/Mass-producing first Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41416
[File Information]
File Name D0A41416.zip
File Type Module for Service
Size 0.21 MB ( 215168 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2017/06
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41416_StopKeyWidget_readme.txt[2019/03/06 13:44:18]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41416_StopKeyWidget_readme.txt[2019/03/06 13:44:18]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/15
------------------------------------------------------------------------
[Program Name] EcoInfoWidget
------------------------------------------------------------------------
[Version] 1.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41417C
[File Information]
File Name D0A41417C.zip
File Type Module for Service
Size 1.99 MB ( 2089993 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41417C_EcoInfoWidget_readme.txt[2019/11/25 11:21:34]
Other changes:
- Minor bug fixes.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.00
Rank D

1st Mass production

D0A41417C_EcoInfoWidget_readme.txt[2019/11/25 11:21:34]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/04
------------------------------------------------------------------------
[Program Name] SimpleScan
------------------------------------------------------------------------
[Version] 1.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41423B_forEDC
[File Information]
File Name D0A41423B_forEDC.zip
File Type Module for Service
Size 2.39 MB ( 2510014 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/10
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41423B_forEDC_SimpleScan_readme.txt[2019/03/06 13:44:18]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41423B_forEDC_SimpleScan_readme.txt[2019/03/06 13:44:18]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] PrinterInfo
------------------------------------------------------------------------
[Version] 1.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41427B_forEDC
[File Information]
File Name D0A41427B_forEDC.zip
File Type Module for Service
Size 1.03 MB ( 1081676 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/10
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41427B_forEDC_PrinterInfo_readme.txt[2019/03/06 13:44:16]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41427B_forEDC_PrinterInfo_readme.txt[2019/03/06 13:44:16]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/04
------------------------------------------------------------------------
[Program Name] SmartCopy
------------------------------------------------------------------------
[Version] 1.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41428B_forEDC
[File Information]
File Name D0A41428B_forEDC.zip
File Type Module for Service
Size 7.35 MB ( 7709130 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41428B_forEDC_SmartCopy_readme.txt[2019/03/06 13:44:15]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41428B_forEDC_SmartCopy_readme.txt[2019/03/06 13:44:15]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/15
------------------------------------------------------------------------
[Program Name] SmartScan
------------------------------------------------------------------------
[Version] 1.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41429D_forEDC
[File Information]
File Name D0A41429D_forEDC.zip
File Type Module for Service
Size 3.51 MB ( 3681620 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

D0A41429D_forEDC_SmartScan_readme.txt[2019/11/25 11:21:33]
Symptom corrected:
- Thai character can be entered to Smart Scan/Fax Application
(E-mail Subject and Body) even though it will not be reflected
on sent E-mail.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.01
Rank D

Other changes:
- Minor bug fixes.

----------------------------------------
Version 1.00
Rank D

1st Mass production

D0A41429D_forEDC_SmartScan_readme.txt[2019/11/25 11:21:33]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/15
------------------------------------------------------------------------
[Program Name] SmartFAX
------------------------------------------------------------------------
[Version] 4.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41430D__forEDC
[File Information]
File Name D0A41430D__forEDC.zip
File Type Module for Service
Size 3.25 MB ( 3409889 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2019/10
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank B

D0A41430D__forEDC_SmartFAX_readme.txt[2019/11/25 11:21:33]
Symptom corrected:
- Smart FAX application bug related to Stored Reception File
management was corrected (user can select reception files
unexpectedly while warming up for printing).
- Thai character can be entered to Smart Scan/Fax Application
(E-mail Subject and Body) even though it will not be reflected
on sent E-mail.
- Sending result notification is sent by mistake in Smart FAX.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 4.01
Rank D

Other changes:
- Minor bug fixes.

----------------------------------------
Version 4.00
Rank D

1st Mass production

D0A41430D__forEDC_SmartFAX_readme.txt[2019/11/25 11:21:33]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/17
------------------------------------------------------------------------
[Program Name] MeidaPrtScn
------------------------------------------------------------------------
[Version] 1.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41431C_forEDC
[File Information]
File Name D0A41431C_forEDC.zip
File Type Module for Service
Size 4.27 MB ( 4482393 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

D0A41431C_forEDC_MeidaPrtScn_readme.txt[2019/11/25 11:21:38]
Symptom corrected:
- The preview screen of the scanned document might not be displayed
on Print/Scan (Memory Storage Device) application, when the
document is scanned with the following condition.
- The file type is TIFF/ JPEG (Single page)
- Preview is checked.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.00
Rank D

1st Mass production

D0A41431C_forEDC_MeidaPrtScn_readme.txt[2019/11/25 11:21:38]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/04
------------------------------------------------------------------------
[Program Name] TrayWidget
------------------------------------------------------------------------
[Version] 1.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41433A
[File Information]
File Name D0A41433A.zip
File Type Module for Service
Size 0.53 MB ( 554432 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41433A_TrayWidget_readme.txt[2019/03/06 13:44:16]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41433A_TrayWidget_readme.txt[2019/03/06 13:44:16]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] BLEPlugin
------------------------------------------------------------------------
[Version] 3.0.5
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41434A
[File Information]
File Name D0A41434A.zip
File Type Module for Service
Size 1.26 MB ( 1319334 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/10
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41434A_BLEPlugin_readme.txt[2019/03/06 13:44:16]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41434A_BLEPlugin_readme.txt[2019/03/06 13:44:16]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/04
------------------------------------------------------------------------
[Program Name] SimpleWFD
------------------------------------------------------------------------
[Version] 1.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41435B
[File Information]
File Name D0A41435B.zip
File Type Module for Service
Size 0.90 MB ( 943934 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41435B_SimpleWFD_readme.txt[2019/03/06 13:44:16]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41435B_SimpleWFD_readme.txt[2019/03/06 13:44:16]
=====================================================================

===

*** Basic Information ***

=====================================================================

===

[Create date] 2020/01/07

------------------------------------------------------------------------

[Program Name] InstSetting

------------------------------------------------------------------------

[Version] 1.03

------------------------------------------------------------------------

[PCB No.]

------------------------------------------------------------------------

[Interchangeability] X / O

------------------------------------------------------------------------

[Other Firmware Requirements] None

------------------------------------------------------------------------

[PCB Requirements] None

------------------------------------------------------------------------

[Software category] Normal Release

------------------------------------------------------------------------

[Release category] Normal Release

------------------------------------------------------------------------

[Program category] Firmware

------------------------------------------------------------------------

Exported to(language) GEN(all)

[Firmware No.] D0A41436D

file:///C/Users/p000330772/Desktop/firm/D0A41436D_InstSetting_readme.txt[2020/01/17 10:14:47]
[File Information]

File Name D0A41436D.zip

File Type Module for Service

Size 1.48 MB ( 1556741 byte )

[Availability of RFU] No

------------------------------------------------------------------------

[Production reflection] 2019/12

------------------------------------------------------------------------

=====================================================================

===

*** Note ***

=====================================================================

===

[Note]

------------------------------------------------------------------------

=====================================================================

===

*** Important Notes ***

=====================================================================

===

[Important Notes]

------------------------------------------------------------------------

file:///C/Users/p000330772/Desktop/firm/D0A41436D_InstSetting_readme.txt[2020/01/17 10:14:47]
=====================================================================

===

*** Modification History ***

=====================================================================

===

[Modifications made:]

Rank C

Symptom corrected:

- "Select your country" on the initial setup screen has been

corrected to "Select your country/region". (English/Chinese)

------------------------------------------------------------------------

[Modification history]

----------------------------------------

Version 1.02

Rank D

Other changes:

- Minor bug fixes.

----------------------------------------

Version 1.01

Rank D

1st Mass production

file:///C/Users/p000330772/Desktop/firm/D0A41436D_InstSetting_readme.txt[2020/01/17 10:14:47]
file:///C/Users/p000330772/Desktop/firm/D0A41436D_InstSetting_readme.txt[2020/01/17 10:14:47]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/12/12
------------------------------------------------------------------------
[Program Name] System/Copy
------------------------------------------------------------------------
[Version] 1.08
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45540E
[File Information]
File Name D0A45540E.fwu
File Type Module for Service
Size 28.49 MB ( 29872608 byte )
[File Information]
File Name D0A45540E.rfu
File Type Module for Remote Upgrade
Size 28.50 MB ( 29880576 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/12
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///E/pdf/copier/im350/firmware_notes/D0A45540E_System_Copy_readme.txt[2019/12/29 17:58:46]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- When printing multiple jobs while "Enhanced Print Volume Use
Limitation" is enabled, the printing might be slower.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.07
Rank C

Other changes:
- SC542-01 and SC552-01 (type A) are removed. SC546-00 and SC556-00
(type D) are added for detecting the low voltage.
This firmware is dependent on the following firmware modules,
update them to the required version:
- System/Copy v1.07 (D0A45540D) or later
- Engine v1.11:09 (D0A45551D) or later

----------------------------------------
Version 1.06
Rank C

Symptom corrected:
- SC569-01 or 02 may occur if the main switch is turned on when the new fusing unit is installed.
- SC865-56 might occur during an OCR scan job with paper of varying sizes.
- Color registration shift occurs.
- When JavaVM isn't installed, the SSL/TLS settings in the Security menu on the WIM can't be reflected in the SSL
communication via port 51443.
- When the USB Device Server Option is enabled on the device, printing from USB might be much slower.
- The device might freeze after logging in to the device at address book screen under the following conditions;
1) Central Management is enabled.
2) Either of Windows authentication, LDAP authentication, or Custom authentication is set on User Authentication
Management.
- If the authentication setting is changed remotely while logging in from the panel, the operation might hang, and the
panel might stall.
- When the auto logout setting is enabled, logout failed message might appear during the printing.

Other changes:
- The default value of the Toner Call Threshold (SP5-507-081) is increased from 10% to 20% in order to prevent the
machine from having the down time.
- When the SP3-920-002 is set to "0" and SP5-930-001 is set to "1", if the temperature inside the machine is or less
than 36 degrees Celsius, a control to improve the toner yield starts working.
- The following SP modes are added: SP1-921 to 922, SP2-104-010 to 012, SP6-030-001 to 003
- The following SP mode is added: SP2-201-206
- The log storage function via @Remote has been removed. This firmware is dependent on the following firmware
modules. Please be sure to update all of them:
- System/Copy V1.06 (D0A45540C) or later
- Web Support V1.02 (D0A45568E) or later
- Engine logs can be collected via @Remote.

----------------------------------------

file:///E/pdf/copier/im350/firmware_notes/D0A45540E_System_Copy_readme.txt[2019/12/29 17:58:46]
Version 1.05
Rank B

Symptom corrected:
- Images might print abnormally when making a combined copy if the
original is scanned in the ADF without specifying the document
size.

----------------------------------------
Version 1.04
Rank C

Symptom corrected:
- When the address book is backed up from an 11S or earlier model
and restored to a 14S or later model, SC899 might occur after
restoring the address book and restarting the machine.
- When "Application Authentication Settings" is enabled, SC899 might
occur after registering or updating an address book over 220 times
from Web Image Monitor.
- The language set for each user may not be applied when logging in
during Energy Saving mode.
- Cannot log-in with VM less application during daylight saving time.
(Only in the case that the daylight saving time period start at Oct-Dec)

Other changes:
- The Java VM version can be confirmed via @Remote.
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.
- Supported RICOH SmartSDK v2.60

----------------------------------------
Version 1.03
Rank C

Symptom corrected:
- Wireless direct connection might fail in Group Owner Mode.

Supported:
- The CPU is replaced with a newer model, so the BIOS is also
updated to support the new model.

----------------------------------------
Version 1.01
Rank C

Symptom corrected:
- Image log might not be sent and stay in the device.
- When scanning with ClearlightPDF JPEG2000, SC865-56 might occur.
- Preview screen of a print job on Enhanced Locked Print might freeze,
when the page is repeatedly moved.
- When the device receive a response of "ICMP unreachable" from a
network device, the communication might fail.
- The machine wakes up from the sleep mode when it receives a MIB
request from @Remote.
- SC845-04 might occur in the following situation:

file:///E/pdf/copier/im350/firmware_notes/D0A45540E_System_Copy_readme.txt[2019/12/29 17:58:46]
1. Cheetah Firmware Update fails.
2. Then, the SD Card is removed, or the supply of electricity is
stopped while the machine is recovering via SD Card.
- The machine might stall if it enters energy saving mode during ARFU.
- When configuring a custom paper size in the Bypass Tray Paper
Settings, the measurements entered for the paper length and width
are reversed.
- The machine might not recover from SC995-002 after replacing the
NVRAM on the controller board.

Other changes:
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.
- A minor change only for the Japanese model.
- If a firmware package is unpublished (for example, when a bug is
discovered after release), it is possible to apply a previous
firmware package via ARFU, SFU, and Application Site.
(Previously, if a firmware package is unpublished then ARFU, SFU,
and Application Site would display an error dialog and the
function could not be used.)

----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///E/pdf/copier/im350/firmware_notes/D0A45540E_System_Copy_readme.txt[2019/12/29 17:58:46]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/04/12
------------------------------------------------------------------------
[Program Name] KerberosService
------------------------------------------------------------------------
[Version] 1.06.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41445B_forEDC
[File Information]
File Name D0A41445B_forEDC.zip
File Type Module for Service
Size 2.23 MB ( 2342044 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2019/02
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41445B_forEDC_KerberosService_readme.txt[2019/05/23 11:02:10]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41445B_forEDC_KerberosService_readme.txt[2019/05/23 11:02:10]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] CSPF
------------------------------------------------------------------------
[Version] 2.02.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41449A_forEDC
[File Information]
File Name D0A41449A_forEDC.zip
File Type Module for Service
Size 0.32 MB ( 340767 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41449A_forEDC_CSPF_readme.txt[2019/03/06 13:44:12]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41449A_forEDC_CSPF_readme.txt[2019/03/06 13:44:12]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] Application Site
------------------------------------------------------------------------
[Version] 1.04.08
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41452A_forEDC
[File Information]
File Name D0A41452A_forEDC.zip
File Type Module for Service
Size 0.64 MB ( 671906 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41452A_forEDC_Application_Site_readme.txt[2019/03/06 13:44:18]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41452A_forEDC_Application_Site_readme.txt[2019/03/06 13:44:18]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/24
------------------------------------------------------------------------
[Program Name] ICCardDispatcher
------------------------------------------------------------------------
[Version] 3.01.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41453C
[File Information]
File Name D0A41453C.zip
File Type Module for Service
Size 0.42 MB ( 445322 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

D0A41453C_ICCardDispatcher_readme.txt[2019/11/25 11:21:38]
Symptom corrected:
- System Reset might occur immediately after authenticating with an
IC card and a SmartSDK application.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 3.01.01
Rank D

1st Mass production

D0A41453C_ICCardDispatcher_readme.txt[2019/11/25 11:21:38]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] NFCPlugin
------------------------------------------------------------------------
[Version] 3.00.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41454B_forEDC
[File Information]
File Name D0A41454B_forEDC.zip
File Type Module for Service
Size 0.03 MB ( 36635 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41454B_forEDC_NFCPlugin_readme.txt[2019/03/06 13:44:17]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41454B_forEDC_NFCPlugin_readme.txt[2019/03/06 13:44:17]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/04
------------------------------------------------------------------------
[Program Name] USBCardPlugin
------------------------------------------------------------------------
[Version] 3.00.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41455B_forEDC
[File Information]
File Name D0A41455B_forEDC.zip
File Type Module for Service
Size 0.04 MB ( 38658 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41455B_forEDC_USBCardPlugin_readme.txt[2019/03/06 13:44:12]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41455B_forEDC_USBCardPlugin_readme.txt[2019/03/06 13:44:12]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/12
------------------------------------------------------------------------
[Program Name] CheetahSystem
------------------------------------------------------------------------
[Version] 1.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41456D
[File Information]
File Name D0A41456D.zip
File Type Module for Service
Size 202.73 MB ( 212582538 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank B

D0A41456D_CheetahSystem_readme.txt[2019/03/14 8:15:00]
Symptom corrected:
- Setting the Function Priority remotely with the SmartSDK WebAPI
might fail if an application other than the home screen is
currently displayed on the operation panel.
- When turning on the machine, the error message, "Unfortunately,
Setting2 has stopped", might appear.
- When opening the detailed sound settings from the Installation
Settings screen, an error message might appear and the Installation
Settings might close unexpectedly.
- Cannot login with some specific authentication application during
the daylight-saving time.
- If the machine goes into sleep mode while internally updating
MovieData after updating the firmware, videos on replacing supplies
will not play normally.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.01
Rank C

Symptom corrected:
- The SmartSDK API for setting the Function Priority might return
the wrong character code and text in the application might be garbled.
- If an authentication application installed, the following issues
might occur.
- Some applications cannot be used after login.
- Force quit the authentication application, then login.
- If paper is repeatedly inserted and removed from the bypass paper
tray within a short space of time, the Bypass Tray Paper Settings
might not be able to open.
- If the Screen Startup Mode is set to 'Quick, the Bypass Tray
Paper Settings might not be able to open immediately after the
machine is turned on.
- The envelope name is displayed as "Yoh/Yoh Chou Envelope"on the
Paper Orientation screen of the Bypass Tray Paper Settings.
- Descriptions might be displayed in English in Smart Integration
application, when Brazilian Portuguese is selected.
- Remote config API might not be available when "Machine Management"
in the "Administrator Authentication Management" is disabled.
- English stays as the display language of the Web Browser NX even
when another display language is selected.

Other changes:
- The startup method for RemoteConnect Support has changed.
Before: Press and hold the top banner for five seconds and then
release it.
New: Press and hold the top banner for five seconds.
- SOP and application setting is stored to HDD.
- Supported RICOH SmartSDK v2.60
- Error LED is indicated, and the status in "Check Status" is
displayed, for SmartSDK application.

----------------------------------------
Version 1.00

D0A41456D_CheetahSystem_readme.txt[2019/03/14 8:15:00]
Rank D

1st Mass production

D0A41456D_CheetahSystem_readme.txt[2019/03/14 8:15:00]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/04
------------------------------------------------------------------------
[Program Name] SmartScanEx
------------------------------------------------------------------------
[Version] 2.00.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41460
[File Information]
File Name D0A41460.zip
File Type Module for Service
Size 4.61 MB ( 4834077 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/10
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41460_SmartScanEx_readme.txt[2019/03/06 13:44:17]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41460_SmartScanEx_readme.txt[2019/03/06 13:44:17]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] HelpService
------------------------------------------------------------------------
[Version] 3.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41471A_forEDC
[File Information]
File Name D0A41471A_forEDC.zip
File Type Module for Service
Size 0.37 MB ( 387825 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A41471A_forEDC_HelpService_readme.txt[2019/03/06 13:44:13]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A41471A_forEDC_HelpService_readme.txt[2019/03/06 13:44:13]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/07/19
------------------------------------------------------------------------
[Program Name] Fax
------------------------------------------------------------------------
[Version] 01.02.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45564D
[File Information]
File Name D0A45564D.fwu
File Type Module for Service
Size 2.41 MB ( 2523168 byte )
[File Information]
File Name D0A45564D.rfu
File Type Module for Remote Upgrade
Size 2.41 MB ( 2531584 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/07
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45564D_Fax_readme.txt[2019/08/28 15:45:04]
========================================================================
[Modifications made:]
Rank C

Other changes:
- Smart SDK applications can communicate with the device to find
out if the setting to store received fax documents is enabled.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 01.01.00
Rank C

Symptom corrected:
- Received fax documents cannot be forwarded to the folder in
GlobalScan NX by the sender's TSID.

----------------------------------------
Version 01.00.00
Rank D

1st Mass production

D0A45564D_Fax_readme.txt[2019/08/28 15:45:04]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/09
------------------------------------------------------------------------
[Program Name] Engine
------------------------------------------------------------------------
[Version] 1.09:09
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45551B
[File Information]
File Name D0A45551B.fwu
File Type Module for Service
Size 3.94 MB ( 4129268 byte )
[File Information]
File Name D0A45551B.rfu
File Type Module for Remote Upgrade
Size 3.95 MB ( 4137216 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45551B_Engine_readme.txt[2019/11/25 11:21:39]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- Due to the change of the Home Position Sensor and SPDF Feed
Sensor, SC121-00 or J004 might occur caused by the new sensor's
antistatic performance.
- If the machine placed in a high voltage environment, it might
misdetect unusual conditions 5 times consecutively and give SC541
error.
- An alert stating that the waste toner level is almost full might
appear earlier than expected.
- SC569-01may occur if the main switch is turned on when the new
fusing unit is installed.

Other changes:
- When the SP3-920-002 is set to "0" and SP5-930-001 is set to "1",
if the temperature inside the machine is or less than 36 degrees
Celsius, a control to improve the toner yield starts working.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.08:09
Rank C

Symptom corrected:
- The Engine firmware cannot be updated at the same time as the Bank firmware.
- Opening and closing the cover after doing the output check for the
feed/fusing motor (SP5-804-013 to 22) might cause SC508 to occur.
- The PM Counter might be incorrect.

----------------------------------------
Version 1.07:09

Rank C

Symptom corrected:
- If a paper misfeed jam occurs during duplex printing, after
recovering from the jam, the misfed page is printed twice and
another page is missing.

D0A45551B_Engine_readme.txt[2019/11/25 11:21:39]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/04
------------------------------------------------------------------------
[Program Name] Java VM v12 std for eDC
------------------------------------------------------------------------
[Version] 12.63.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45553A_edc
[File Information]
File Name D0A45553A_edc.ifu
File Type Module for Service
Size 64.02 MB ( 67133068 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D0A45553A_edc_Java_VM_v12_std_for_eDC_readme.txt[2019/03/06 13:44:13]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A45553A_edc_Java_VM_v12_std_for_eDC_readme.txt[2019/03/06 13:44:13]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/11/01
------------------------------------------------------------------------
[Program Name] CheetahSystem
------------------------------------------------------------------------
[Version] 1.03.1
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A41456E
[File Information]
File Name D0A41456E.zip
File Type Module for Service
Size 203.02 MB ( 212883369 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2019/10
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

file:///10.62.17.218/data/bulletin.dat/Firmware_release_note/201911/D0A41456E_CheetahSystem_readme.txt[2019/12/10 16:06:33]
Symptom corrected:
- When following are executed in SOP-G2 models, the setting items
for Web Browser NX will be changed to default values. Then the web
application such as RSI application cannot be used.
Updating CheetahSystem v1.00 or less to v1.01 or later.
Downgrading CheetahSystem v1.01 or later to v1.00 or less.
* Changed setting items and default values are:
Save Password: Do not Save
Save Form Data: Do not Save
Save Cookie: Do not Save
Store Application Cache: Do not Save
Restrict Usage for Users: Do not Restrict
Check SSL Error: Check
- The device with CAP/ELP may not be found via Configuration Tool
after system reset of device.
- The update might fail with error 235, when the package firmware
update is conducted.
- Application name is displayed only in English on the Installation
screen of Web Image Monitor.
- Remote Update/Uninstallation of SOP native application from Web
Image Monitor may be failed.
- The machine is stalled after remote update or installation
(offline operation > Install [2-visit course]) of CAP/ELP via CLA
is finished.
- Some applications developed with Ricoh HeadQuarter may not work
properly.
- When the User's Own Customization setting is allowed, the display
language may not switch to user own language after login.
- When the User's Own Customization setting is allowed, normal
startup will start, even if the Control Panel Startup Mode is set
to "quick".

Other changes:
- Supported RICOH SmartSDK v2.60

Supported:
- Return bottuon on SOP is supported for SmartSDK.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.02
Rank B

Symptom corrected:
- Setting the Function Priority remotely with the SmartSDK WebAPI
might fail if an application other than the home screen is
currently displayed on the operation panel.
- When turning on the machine, the error message, "Unfortunately,
Setting2 has stopped", might appear.
- When opening the detailed sound settings from the Installation
Settings screen, an error message might appear and the Installation
Settings might close unexpectedly.
- Cannot login with some specific authentication application during
the daylight-saving time.
- If the machine goes into sleep mode while internally updating
MovieData after updating the firmware, videos on replacing supplies

file:///10.62.17.218/data/bulletin.dat/Firmware_release_note/201911/D0A41456E_CheetahSystem_readme.txt[2019/12/10 16:06:33]
will not play normally.

----------------------------------------
Version 1.01
Rank C

Symptom corrected:
- The SmartSDK API for setting the Function Priority might return
the wrong character code and text in the application might be garbled.
- If an authentication application installed, the following issues
might occur.
- Some applications cannot be used after login.
- Force quit the authentication application, then login.
- If paper is repeatedly inserted and removed from the bypass paper
tray within a short space of time, the Bypass Tray Paper Settings
might not be able to open.
- If the Screen Startup Mode is set to 'Quick, the Bypass Tray
Paper Settings might not be able to open immediately after the
machine is turned on.
- The envelope name is displayed as "Yoh/Yoh Chou Envelope"on the
Paper Orientation screen of the Bypass Tray Paper Settings.
- Descriptions might be displayed in English in Smart Integration
application, when Brazilian Portuguese is selected.
- Remote config API might not be available when "Machine Management"
in the "Administrator Authentication Management" is disabled.
- English stays as the display language of the Web Browser NX even
when another display language is selected.

Other changes:
- The startup method for RemoteConnect Support has changed.
Before: Press and hold the top banner for five seconds and then
release it.
New: Press and hold the top banner for five seconds.
- SOP and application setting is stored to HDD.
- Supported RICOH SmartSDK v2.60
- Error LED is indicated, and the status in "Check Status" is
displayed, for SmartSDK application.

----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///10.62.17.218/data/bulletin.dat/Firmware_release_note/201911/D0A41456E_CheetahSystem_readme.txt[2019/12/10 16:06:33]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] Java VM v12 std UpdateTool
------------------------------------------------------------------------
[Version] 12.63.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45553A_upd
[File Information]
File Name D0A45553A_upd.exe
File Type Module for Service
Size 63.77 MB ( 66870810 byte )
Check Sum -8Bit Sum: A2BD
-16Bit Sum(Little Endian): 437E
-16Bit Sum(Big Endian): 1C3F
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================

D0A45553A_upd_Java_VM_v12_std_UpdateToo_readme.txt[2019/03/06 13:44:13]
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A45553A_upd_Java_VM_v12_std_UpdateToo_readme.txt[2019/03/06 13:44:13]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] HelpData
------------------------------------------------------------------------
[Version] 0.006
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45554A
[File Information]
File Name D0A45554A.fwu
File Type Module for Service
Size 2.87 MB ( 3008516 byte )
[File Information]
File Name D0A45554A.rfu
File Type Module for Remote Upgrade
Size 2.88 MB ( 3014912 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45554A_HelpData_readme.txt[2019/03/06 13:44:13]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A45554A_HelpData_readme.txt[2019/03/06 13:44:13]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] MovieData
------------------------------------------------------------------------
[Version] 1.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45555B
[File Information]
File Name D0A45555B.fwu
File Type Module for Service
Size 9.54 MB ( 10005224 byte )
[File Information]
File Name D0A45555B.rfu
File Type Module for Remote Upgrade
Size 9.55 MB ( 10010880 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45555B_MovieData_readme.txt[2019/03/06 13:44:13]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A45555B_MovieData_readme.txt[2019/03/06 13:44:13]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] MovieData3
------------------------------------------------------------------------
[Version] 1.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45557B
[File Information]
File Name D0A45557B.fwu
File Type Module for Service
Size 27.53 MB ( 28871004 byte )
[File Information]
File Name D0A45557B.rfu
File Type Module for Remote Upgrade
Size 27.54 MB ( 28877056 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45557B_MovieData3_readme.txt[2019/03/06 13:44:14]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A45557B_MovieData3_readme.txt[2019/03/06 13:44:14]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] System/Copy
------------------------------------------------------------------------
[Version] 1.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45560C
[File Information]
File Name D0A45560C.fwu
File Type Module for Service
Size 28.47 MB ( 29853576 byte )
[File Information]
File Name D0A45560C.rfu
File Type Module for Remote Upgrade
Size 28.48 MB ( 29860096 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45560C_System_Copy_readme.txt[2019/03/06 13:44:14]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A45560C_System_Copy_readme.txt[2019/03/06 13:44:14]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] PowerSaving Sys
------------------------------------------------------------------------
[Version] 1.L3.15
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45563A
[File Information]
File Name D0A45563A.fwu
File Type Module for Service
Size 4.00 MB ( 4194832 byte )
[File Information]
File Name D0A45563A.rfu
File Type Module for Remote Upgrade
Size 4.01 MB ( 4202752 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45563A_PowerSaving_Sys_readme.txt[2019/03/06 13:44:14]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A45563A_PowerSaving_Sys_readme.txt[2019/03/06 13:44:14]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/15
------------------------------------------------------------------------
[Program Name] Fax
------------------------------------------------------------------------
[Version] 01.03.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45564E
[File Information]
File Name D0A45564E.fwu
File Type Module for Service
Size 2.41 MB ( 2522416 byte )
[File Information]
File Name D0A45564E.rfu
File Type Module for Remote Upgrade
Size 2.41 MB ( 2527488 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45564E_Fax_readme.txt[2019/11/25 11:21:37]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- Stored received FAX document may not be printed if energy saving mode is enabled.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 01.02.00
Rank C

Other changes:
- Smart SDK applications can communicate with the device to find
out if the setting to store received fax documents is enabled.

----------------------------------------
Version 01.01.00
Rank C

Symptom corrected:
- Received fax documents cannot be forwarded to the folder in
GlobalScan NX by the sender's TSID.

----------------------------------------
Version 01.00.00
Rank D

1st Mass production

D0A45564E_Fax_readme.txt[2019/11/25 11:21:37]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/15
------------------------------------------------------------------------
[Program Name] GWFCU3.8-19(WW)
------------------------------------------------------------------------
[Version] 02.00.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45566C
[File Information]
File Name D0A45566C.fwu
File Type Module for Service
Size 3.94 MB ( 4129296 byte )
[File Information]
File Name D0A45566C.rfu
File Type Module for Remote Upgrade
Size 3.95 MB ( 4137216 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45566C_GWFCU3.8-19(WW)_readme.txt[2019/11/25 11:21:38]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- SC 871-01 might occur and the Fax application might go into a stall when recovering from the energy saving
mode.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 01.00.01
Rank D

1st Mass production

D0A45566C_GWFCU3.8-19(WW)_readme.txt[2019/11/25 11:21:38]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/11/28
------------------------------------------------------------------------
[Program Name] Scanner
------------------------------------------------------------------------
[Version] 01.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45567D
[File Information]
File Name D0A45567D.fwu
File Type Module for Service
Size 5.15 MB ( 5397656 byte )
[File Information]
File Name D0A45567D.rfu
File Type Module for Remote Upgrade
Size 5.15 MB ( 5402880 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///E/pdf/copier/im350/firmware_notes/D0A45567D_Scanner_readme.txt[2019/12/29 17:58:46]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- When sending a saved document, the captured image file might not
be sent if a SmartSDK scanner application is installed.
- Scanning with the OCR function might stop working correctly after
scanning to email with the following conditions:
- Scanning an original as a PDF file with both the OCR function
and the Delete Blank Page function selected.
- Sending the file as a URL link.
- All pages of the original are blank.
- Image log of Scan job (OCR or high compression PDF) may not be
collected correctly.
- Folders named with double-byte characters may not be displayed
correctly (Missing or Garbled) in Smart Scanner app.
- A hidden folder may be browsed via network with Smart Scanner app.
- The following symptoms might occur when emailing the URL link of
a scanned image if the Image Log Capture function is enabled:
- The device might not enter Engine OFF mode.
- Firmware Update via SD card might fail.
- Automatic Remote Firmware Update might fail.
- The device might not power down via a device management tool,
such as Device
Manager NX.
- If there are over 300 open image files, subsequent jobs might
not be executed.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 01.01
Rank C

Symptom corrected:
- An error might occur when sending mail if the billing code is used
with the Card Authentication Package v2.
- Image log of Scan job (OCR or high compression PDF) may not be
collected correctly.

----------------------------------------
Version 01.00
Rank D

1st Mass production

file:///E/pdf/copier/im350/firmware_notes/D0A45567D_Scanner_readme.txt[2019/12/29 17:58:46]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/16
------------------------------------------------------------------------
[Program Name] Web Support
------------------------------------------------------------------------
[Version] 1.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45568E
[File Information]
File Name D0A45568E.fwu
File Type Module for Service
Size 7.40 MB ( 7761552 byte )
[File Information]
File Name D0A45568E.rfu
File Type Module for Remote Upgrade
Size 7.41 MB ( 7766272 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45568E_Web_Support_readme.txt[2019/11/25 11:21:40]
========================================================================
[Modifications made:]
Rank C

Other changes:
- The log storage function via @Remote has been removed.
This firmware is dependent on the following firmware modules.
Please be sure to update all of them:
- System/Copy V1.06 (D0A45540C) or later
- Web Support V1.02 (D0A45568E) or later

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.01
Rank C

Other changes:
- The following values can be set with solution software that uses SOAP I/F.
- "SNMPv3 Setting"
- SNMPv3 Trap Communication
- Encryption Algorithm
- Permit SNMPv3 Communication
- "Program/Change Administrator"
- Encryption Password
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.

----------------------------------------
Version 1.00
Rank D

1st Mass production

D0A45568E_Web_Support_readme.txt[2019/11/25 11:21:40]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/04
------------------------------------------------------------------------
[Program Name] Web Uapl
------------------------------------------------------------------------
[Version] 1.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45569C
[File Information]
File Name D0A45569C.fwu
File Type Module for Service
Size 1.96 MB ( 2053040 byte )
[File Information]
File Name D0A45569C.rfu
File Type Module for Remote Upgrade
Size 1.97 MB ( 2060544 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45569C_Web_Uapl_readme.txt[2019/03/06 13:44:24]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A45569C_Web_Uapl_readme.txt[2019/03/06 13:44:24]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/12/11
------------------------------------------------------------------------
[Program Name] Network Support
------------------------------------------------------------------------
[Version] 17.30
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45572E
[File Information]
File Name D0A45572E.fwu
File Type Module for Service
Size 12.15 MB ( 12736112 byte )
[File Information]
File Name D0A45572E.rfu
File Type Module for Remote Upgrade
Size 12.15 MB ( 12742912 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/12
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...引き継ぎ/サービスマニュアルとファームリリースノート/作業/20200809/FRN/D0A45572E_Network_Support_readme.txt[2020/10/12 9:41:18]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- It is now possible to disable CBC mode to address the TLS CBC
Padding Oracle vulnerability. To activate this fix, CBC mode must
be disabled after updating the firmware by entering the following
commands:
- msh> set cbc down
- msh> logout
- Enter "yes" to save the changes.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 17.29
Rank C

Symptom corrected:
- When conducting AirPrint, if port 80/TCP (HTTP) or port 631/TCP
(IPP) in the printer is closed, the Apple device cannot find the
printer.
- When JavaVM isn't installed, the SSL/TLS settings in the Security
menu on the WIM can't be reflected in the SSL communication via
port 51443.

----------------------------------------
Version 17.28
Rank C

Symptom corrected:
- DNS name resolution for the device might fail if DDNS is enabled
in a DHCPv6 environment.
- The DHCP address renewal request might be discarded when the DHCP
server is configured as a failover cluster.

Other changes:
- Supported RICOH SmartSDK v2.60
- Even when the certificate key length for @Remote is set to 512-bit,
the device can connect to the firmware download server (for ARFU, SFU, etc.).
- It is now possible to close the following ports with a Telnet command:
- 111/tcp
- 111/udp
- 1022/tcp
- 1023/tcp
- 1022/udp
- 1023/udp
- 2049/tcp
- 18315/tcp
- 54080/tcp
- 54443/tcp
- 65000/tcp
- 65001/tcp
Please refer to the RTB (RGene108a) for more details.

file:///C/...引き継ぎ/サービスマニュアルとファームリリースノート/作業/20200809/FRN/D0A45572E_Network_Support_readme.txt[2020/10/12 9:41:18]
----------------------------------------
Version 17.27
Rank D

1st Mass production

file:///C/...引き継ぎ/サービスマニュアルとファームリリースノート/作業/20200809/FRN/D0A45572E_Network_Support_readme.txt[2020/10/12 9:41:18]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/15
------------------------------------------------------------------------
[Program Name] NetworkDocBox
------------------------------------------------------------------------
[Version] 1.03
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45570E
[File Information]
File Name D0A45570E.fwu
File Type Module for Service
Size 9.00 MB ( 9440464 byte )
[File Information]
File Name D0A45570E.rfu
File Type Module for Remote Upgrade
Size 9.01 MB ( 9445632 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45570E_NetworkDocBox_readme.txt[2019/11/25 11:21:40]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- The "DOSS Last Auto Delete Date" might not be recorded
under "Device Properties" on Streamline NX or Device
Manager NX.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.02
Rank C

Symptom corrected:
- When SmartSDK WebAPI is used for image log and job log notification,
there might be a delay if multiple log notifications are sent at the same time.
- When using a SmartSDK log capturing function and executing multiple
stored scan jobs, only one image job might be recorded in the log.

Other changes:
- Supported RICOH SmartSDK v2.60

----------------------------------------
Version 1.01
Rank C

Symptom corrected:
- SC865 may occur when the following conditions are met.
- SP5-836-143 is "1: ON" (Default "0: OFF")
- High compression PDF setting is "JPEG2000" (Image) or "JBIG2" (text).
- The log time reported to the SmartSDK application might be wrong.

Other changes:
- The following values can be set with solution software that uses SOAP I/F.
- "SNMPv3 Setting"
- SNMPv3 Trap Communication
- Encryption Algorithm
- Permit SNMPv3 Communication
- "Program/Change Administrator"
- Encryption Password

----------------------------------------
Version 1.00
Rank D

1st Mass production

D0A45570E_NetworkDocBox_readme.txt[2019/11/25 11:21:40]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/01/07
------------------------------------------------------------------------
[Program Name] animation
------------------------------------------------------------------------
[Version] 1.03
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(ja,en,f,e,d,i,nl,s,n,dk,sf,p,pl,h,cz,ru,sc,tc,kr,br,tr,ca,gr)
[Firmware No.] D0A45571E
[File Information]
File Name D0A45571E.fwu
File Type Module for Service
Size 16.24 MB ( 17026436 byte )
[File Information]
File Name D0A45571E.rfu
File Type Module for Remote Upgrade
Size 16.24 MB ( 17031424 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/Users/p000330772/Desktop/firm/D0A45571E_animation_readme.txt[2020/01/17 10:13:01]
========================================================================
[Modifications made:]

Rank C

Symptom corrected:
- "Select your country" on the initial setup screen has been
corrected to "Select your country/region". (English/Chinese)

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.02
Rank C

Other changes:
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.

----------------------------------------
Version 1.01
Rank C

Other changes:
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.

----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/Users/p000330772/Desktop/firm/D0A45571E_animation_readme.txt[2020/01/17 10:13:01]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] Network Support
------------------------------------------------------------------------
[Version] 17.27
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45572B
[File Information]
File Name D0A45572B.fwu
File Type Module for Service
Size 12.14 MB ( 12732504 byte )
[File Information]
File Name D0A45572B.rfu
File Type Module for Remote Upgrade
Size 12.15 MB ( 12738816 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2018/10
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45572B_Network_Support_readme.txt[2019/03/06 13:44:23]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A45572B_Network_Support_readme.txt[2019/03/06 13:44:23]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/10
------------------------------------------------------------------------
[Program Name] Printer
------------------------------------------------------------------------
[Version] 1.03
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45574F
[File Information]
File Name D0A45574F.fwu
File Type Module for Service
Size 4.87 MB ( 5105136 byte )
[File Information]
File Name D0A45574F.rfu
File Type Module for Remote Upgrade
Size 4.88 MB ( 5112064 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45574F_Printer_readme.txt[2019/11/25 11:21:35]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- If both Device Manager NX and Enhanced Locked Print NX v2 are
installed, printing a job via Enhanced Locked Print NX v2 or
logging out might fail.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.02
Rank C

Symptom corrected:
- An IPDS form with a custom size might be missing from the Tray
Form List in the IPDS menu on the WIM.

----------------------------------------
Version 1.01
Rank C

Symptom corrected:
- If many jobs are stored through Enhanced Locked Print NX v2, the
thumbnails of some of the jobs might not be displayed.
- A job might be printed out when trying to store it through
Enhanced Locked Print NX v2.
- After storing a job, the free space remaining on the hard disk
might be less than the lower limit set with the Configuration Tool
of Enhanced Locked Print NX v2.
- The stored document name might be incorrect on the Enhanced Locked
Print NX v2 screen if the job is stored from a computer running on Windows
and "Hide extensions for known file types" in "Folder Options" is enabled.
- If the hard disk becomes full while storing a job through Enhanced
Locked Print NX v2, the storing process might stall.
- If a job with an unknown username is stored through Enhanced Locked
Print NX v2, subsequent jobs might not be stored.

Other changes:
- The pre-included version of ELP/CAP is updated to 1.5.100.
- The thumbnail creation method on Enhanced Locked Print NX v2
has been revised.

----------------------------------------
Version 1.00
Rank D

1st Mass production

D0A45574F_Printer_readme.txt[2019/11/25 11:21:35]
D0A45574F_Printer_readme.txt[2019/11/25 11:21:35]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] PCL
------------------------------------------------------------------------
[Version] 1.05
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45577B
[File Information]
File Name D0A45577B.fwu
File Type Module for Service
Size 1.38 MB ( 1442144 byte )
[File Information]
File Name D0A45577B.rfu
File Type Module for Remote Upgrade
Size 1.38 MB ( 1450240 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45577B_PCL_readme.txt[2019/03/06 13:44:25]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A45577B_PCL_readme.txt[2019/03/06 13:44:25]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] IRIPS PS
------------------------------------------------------------------------
[Version] 1.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45579B
[File Information]
File Name D0A45579B.fwu
File Type Module for Service
Size 0.01 MB ( 1652 byte )
[File Information]
File Name D0A45579B.rfu
File Type Module for Remote Upgrade
Size 0.01 MB ( 8448 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D0A45579B_IRIPS_PS_readme.txt[2019/03/06 13:44:25]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D0A45579B_IRIPS_PS_readme.txt[2019/03/06 13:44:25]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/05/09
------------------------------------------------------------------------
[Program Name] IRIPS PDF
------------------------------------------------------------------------
[Version] 1.12
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45581E
[File Information]
File Name D0A45581E.fwu
File Type Module for Service
Size 2.80 MB ( 2937876 byte )
[File Information]
File Name D0A45581E.rfu
File Type Module for Remote Upgrade
Size 2.81 MB ( 2945280 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/04
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

/D0A45581E_IRIPS_PDF_readme.txt[2019/07/09 9:16:39]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- The minus sign (-) in a PDF file might not be printed via PDF Direct.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.11
Rank C

Symptom corrected:
- When printing a PDF file that contains downloaded fonts, an
invalid font error might occur, and the print job might be canceled.
- A locked print job might not be stored on the machine if it is
printed using PJL commands.
- Images might not appear as expected when printing a PDF file via AirPrint.
- PDF files that are generated by certain applications might not
print via Direct Print.
- When printing a PDF file that contains circled letters or numbers,
the circle itself might be distorted.

----------------------------------------
Version 1.10
Rank D

1st Mass production

/D0A45581E_IRIPS_PDF_readme.txt[2019/07/09 9:16:39]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/10/09
------------------------------------------------------------------------
[Program Name] PDF
------------------------------------------------------------------------
[Version] 1.03
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3EM5733B
[File Information]
File Name D3EM5733B.fwu
File Type Module for Service
Size 4.28 MB ( 4490204 byte )
[File Information]
File Name D3EM5733B.rfu
File Type Module for Remote Upgrade
Size 4.29 MB ( 4497664 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/Users/p000330772/Desktop/firm/D3EM5733B_PDF_readme.txt[2019/12/18 9:27:42]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- SC899 might occur when direct printing a PDF file that contains
JBIG2-compressed data.
- SC899 might occur when printing a webpage on Linux.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.02
Rank C

Symptom corrected:
- If a PDF contains transparent images, printing might be canceled
due to a lack of memory.
- Printing a PDF with a transparent image and a shaded image might
take a long time due to memory release processing, and the shaded
image might not be printed as expected.
- When printing a PDF file that contains transparent images via PDF
Direct, the output might be distorted.
- When sending a fax via the SmartSDK, images might be missing or
output at the wrong size.

----------------------------------------
Version 1.01
Rank D

1st Mass production

file:///C/Users/p000330772/Desktop/firm/D3EM5733B_PDF_readme.txt[2019/12/18 9:27:42]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/04
------------------------------------------------------------------------
[Program Name] XPS
------------------------------------------------------------------------
[Version] 1.11
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3EM5737
[File Information]
File Name D3EM5737.fwu
File Type Module for Service
Size 1.97 MB ( 2061744 byte )
[File Information]
File Name D3EM5737.rfu
File Type Module for Remote Upgrade
Size 1.97 MB ( 2068736 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D3EM5737_XPS_readme.txt[2019/03/06 13:23:42]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D3EM5737_XPS_readme.txt[2019/03/06 13:23:42]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/01
------------------------------------------------------------------------
[Program Name] aics
------------------------------------------------------------------------
[Version] 01.00.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3EM5759
[File Information]
File Name D3EM5759.fwu
File Type Module for Service
Size 0.09 MB ( 98660 byte )
[File Information]
File Name D3EM5759.rfu
File Type Module for Remote Upgrade
Size 0.10 MB ( 106752 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D3EM5759_aics_readme.txt[2019/03/06 13:23:41]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D3EM5759_aics_readme.txt[2019/03/06 13:23:41]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/11/25
------------------------------------------------------------------------
[Program Name] System
------------------------------------------------------------------------
[Version] 1.06
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5560G
[File Information]
File Name M0BQ5560G.fwu
File Type Module for Service
Size 23.77 MB ( 24927324 byte )
[File Information]
File Name M0BQ5560G.rfu
File Type Module for Remote Upgrade
Size 23.78 MB ( 24932608 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/11
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///E/pdf/copier/im350/firmware_notes/M0BQ5560G_System_readme.txt[2019/12/29 17:58:45]
========================================================================
[Modifications made:]
Rank C

Other changes:
- SC542-01 and SC552-01 (type A) are removed. SC546-00 and SC556-00
(type D) are added for detecting the low voltage.
This firmware is dependent on the following firmware modules,
update them to the required version:
- System v1.06 (M0BQ5560G) or later
- Engine v1.09:12 (M0BQ5550F) or later

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.05
Rank C

Symptom corrected:
- SC569-01 or 02 may occur if the main switch is turned on when the
new fusing unit is installed.
- If the SC545-00 occurs when the Installation Setting screen is
displayed at startup, it is not possible to enter the SP mode, so
the SC545-00 cannot be canceled.
- Color registration shift occurs.
- When JavaVM isn't installed, the SSL/TLS settings in the Security
menu on the WIM can't be reflected in the SSL communication via
port 51443.
- SC819 may occur if IC card reader is disconnected and connected
during machine power ON.

Other changes:
- When the SP3-920-002 is set to "0" and SP5-930-001 is set to "1",
if the temperature inside the machine is or less than 36 degrees
Celsius, a control to improve the toner yield starts working.
- The following SP modes are added: SP1-921 to 922, SP2-104-010 to 012,
SP6-030-001 to 003
- The following SP mode is added: SP2-201-206
- The default value of the Toner Call Threshold (SP5-507-081) is
increased from 10% to 20% in order to prevent the machine from
having the down time.

----------------------------------------
Version 1.04
Rank C

Symptom corrected:
- Black spots might appear on the display due to low voltage.

----------------------------------------
Version 1.03
Rank C

Symptom corrected:

file:///E/pdf/copier/im350/firmware_notes/M0BQ5560G_System_readme.txt[2019/12/29 17:58:45]
- Wireless direct connection might fail in Group Owner Mode.

----------------------------------------
Version 1.02
Rank C

Other changes:
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.

----------------------------------------
Version 1.01
Rank D

1st Mass production

file:///E/pdf/copier/im350/firmware_notes/M0BQ5560G_System_readme.txt[2019/12/29 17:58:45]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/07/19
------------------------------------------------------------------------
[Program Name] System
------------------------------------------------------------------------
[Version] 1.04
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5560E
[File Information]
File Name M0BQ5560E.fwu
File Type Module for Service
Size 23.77 MB ( 24927280 byte )
[File Information]
File Name M0BQ5560E.rfu
File Type Module for Remote Upgrade
Size 23.78 MB ( 24932608 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/06
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

M0BQ5560E_System_readme.txt[2019/08/28 15:52:16]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- Black spots might appear on the display due to low voltage.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.03
Rank C

Symptom corrected:
- Wireless direct connection might fail in Group Owner Mode.

----------------------------------------
Version 1.02
Rank C

Other changes:
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.

----------------------------------------
Version 1.01
Rank D

1st Mass production

M0BQ5560E_System_readme.txt[2019/08/28 15:52:16]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/11/25
------------------------------------------------------------------------
[Program Name] Engine
------------------------------------------------------------------------
[Version] 1.09:12
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5550F
[File Information]
File Name M0BQ5550F.fwu
File Type Module for Service
Size 0.94 MB ( 983540 byte )
[File Information]
File Name M0BQ5550F.rfu
File Type Module for Remote Upgrade
Size 0.95 MB ( 991488 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/11
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///E/pdf/copier/im350/firmware_notes/M0BQ5550F_Engine_readme.txt[2019/12/29 17:58:47]
========================================================================
[Modifications made:]
Rank C

Other changes:
- SC542-01 and SC552-01 (type A) are removed. SC546-00 and SC556-00
(type D) are added for detecting the low voltage.
This firmware is dependent on the following firmware modules,
update them to the required version:
- System v1.06 (M0BQ5560G) or later
- Engine v1.09:12 (M0BQ5550F) or later

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.08:12
Rank C

Symptom corrected:
- When feeding paper from an optional paper feed unit, a jam (J017)
might occur.
- If the machine placed in a high voltage environment, it might
misdetect unusual conditions 5 times consecutively and give SC541
error.
- An alert stating that the waste toner level is almost full might
appear earlier than expected.
- SC569-01may occur if the main switch is turned on when the new
fusing unit is installed.
- When a non-paper feed jam occurred during a duplex printing job to
a small size paper shorter than 215.9mm, the machine may not stop
and the Jam21 may occur after two minutes.
- When a non-paper feed jam occurred under the following conditions,
the machine may not stop and the Jam21 may occur after two minutes.
- Paper feed direction: Short edge feed
- Paper tray: Option tray
- Printing mode: More than 3 sheets duplex printing job
- The estimated toner near-end status might come earlier than
expected.
- SC995-03 may occur when the main switch is turned on.

Other changes:
- When the SP3-920-002 is set to "0" and SP5-930-001 is set to "1",
if the temperature inside the machine is or less than 36 degrees
Celsius, a control to improve the toner yield starts working.

----------------------------------------
Version 1.06:12
Rank C

Symptom corrected:
- Opening and closing the cover after doing the output check for the
feed/fusing motor (SP5-804-013 to 22) might cause SC508 to occur.
- The PM Counter might be incorrect.

file:///E/pdf/copier/im350/firmware_notes/M0BQ5550F_Engine_readme.txt[2019/12/29 17:58:47]
----------------------------------------
Version 1.05:12
Rank C

Symptom corrected:
- If the Inrush Control is enabled in SP1-135-001, a circuit breaker
or UPS might cut off the power when the machine is turned on or
wakes up from sleep mode due to the inrush current.

----------------------------------------
Version 1.04:12
Rank D

1st Mass production

file:///E/pdf/copier/im350/firmware_notes/M0BQ5550F_Engine_readme.txt[2019/12/29 17:58:47]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/05
------------------------------------------------------------------------
[Program Name] PowerSaving Sys
------------------------------------------------------------------------
[Version] 1.L3.21
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5563
[File Information]
File Name M0BQ5563.fwu
File Type Module for Service
Size 4.00 MB ( 4194832 byte )
[File Information]
File Name M0BQ5563.rfu
File Type Module for Remote Upgrade
Size 4.01 MB ( 4202752 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2018/07
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

M0BQ5563_PowerSaving_Sys_readme.txt[2019/03/06 13:23:53]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

M0BQ5563_PowerSaving_Sys_readme.txt[2019/03/06 13:23:53]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/12/11
------------------------------------------------------------------------
[Program Name] Network Support
------------------------------------------------------------------------
[Version] 17.45
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5572D
[File Information]
File Name M0BQ5572D.fwu
File Type Module for Service
Size 11.38 MB ( 11928864 byte )
[File Information]
File Name M0BQ5572D.rfu
File Type Module for Remote Upgrade
Size 11.38 MB ( 11936000 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/12
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///E/pdf/copier/im350/firmware_notes/M0BQ5572D_Network_Support_readme.txt[2019/12/29 17:58:47]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- A vulnerability (CVE-2019-1559) to a Padding Oracle Attack on CBC encryption has been fixed. To activate this
fix, CBC mode must be disabled after updating the firmware.
- msh> set cbc down
- msh> logout
- Enter "yes" to save the changes.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 17.44
Rank C

Symptom corrected:
- The DHCP address renewal request might be discarded when the DHCP
server is configured as a failover cluster.
- When JavaVM isn't installed, the SSL/TLS settings in the Security
menu on the WIM can't be reflected in the SSL communication via port 51443.

----------------------------------------
Version 17.43
Rank D

1st Mass production

file:///E/pdf/copier/im350/firmware_notes/M0BQ5572D_Network_Support_readme.txt[2019/12/29 17:58:47]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/09/30
------------------------------------------------------------------------
[Program Name] Printer
------------------------------------------------------------------------
[Version] 1.05
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5574C
[File Information]
File Name M0BQ5574C.fwu
File Type Module for Service
Size 4.06 MB ( 4254784 byte )
[File Information]
File Name M0BQ5574C.rfu
File Type Module for Remote Upgrade
Size 4.06 MB ( 4260096 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

M0BQ5574C_Printer_readme.txt[2019/11/25 12:43:37]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- If both Device Manager NX and Enhanced Locked Print NX v2 are installed,
printing a job via Enhanced Locked Print NX v2 or logging out might fail.

Other changes:
- Device information can be checked via a USB connection.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.04
Rank C

Symptom corrected:
- An IPDS form with a custom media type might be missing from the
Tray Form List for Bypass Tray in the IPDS menu on the WIM.
- An IPDS form with a custom size might be missing from the Tray
Form List in the IPDS menu on the WIM.

----------------------------------------
Version 1.00
Rank D

1st Mass production

M0BQ5574C_Printer_readme.txt[2019/11/25 12:43:37]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/05
------------------------------------------------------------------------
[Program Name] RPCS
------------------------------------------------------------------------
[Version] 3.21.10
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5576
[File Information]
File Name M0BQ5576.fwu
File Type Module for Service
Size 0.63 MB ( 665332 byte )
[File Information]
File Name M0BQ5576.rfu
File Type Module for Remote Upgrade
Size 0.64 MB ( 672000 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2018/07
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

M0BQ5576_RPCS_readme.txt[2019/03/06 14:52:18]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

M0BQ5576_RPCS_readme.txt[2019/03/06 14:52:18]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/05
------------------------------------------------------------------------
[Program Name] PCL
------------------------------------------------------------------------
[Version] 1.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5577A
[File Information]
File Name M0BQ5577A.fwu
File Type Module for Service
Size 1.38 MB ( 1443984 byte )
[File Information]
File Name M0BQ5577A.rfu
File Type Module for Remote Upgrade
Size 1.38 MB ( 1450240 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

M0BQ5577A_PCL_readme.txt[2019/03/06 14:52:18]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

M0BQ5577A_PCL_readme.txt[2019/03/06 14:52:18]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/09/20
------------------------------------------------------------------------
[Program Name] Network DocBox
------------------------------------------------------------------------
[Version] 1.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5570B
[File Information]
File Name M0BQ5570B.fwu
File Type Module for Service
Size 0.99 MB ( 1038552 byte )
[File Information]
File Name M0BQ5570B.rfu
File Type Module for Remote Upgrade
Size 1.00 MB ( 1044736 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

M0BQ5570B_Network_DocBox_readme.txt[2019/11/25 12:43:36]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- The log time reported to the SmartSDK application might be wrong.
- When using the application for the Japanese market, the Job Log
transfer settings might not be set correctly when importing the
preference information from another device.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.00
Rank D

1st Mass production

M0BQ5570B_Network_DocBox_readme.txt[2019/11/25 12:43:36]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/06
------------------------------------------------------------------------
[Program Name] IRIPS PS
------------------------------------------------------------------------
[Version] 1.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5579A
[File Information]
File Name M0BQ5579A.fwu
File Type Module for Service
Size 0.01 MB ( 1656 byte )
[File Information]
File Name M0BQ5579A.rfu
File Type Module for Remote Upgrade
Size 0.01 MB ( 8448 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

M0BQ5579A_IRIPS_PS_readme.txt[2019/03/14 8:15:14]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

M0BQ5579A_IRIPS_PS_readme.txt[2019/03/14 8:15:14]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/11
------------------------------------------------------------------------
[Program Name] ID Card Scan and Copy
------------------------------------------------------------------------
[Version] 1.2.10
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5500J_forEDC
[File Information]
File Name D3CM5500J_forEDC.zip
File Type Module for Service
Size 1.97 MB ( 2068311 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

D3CM5500J_forEDC_ID_Card_Scan_and_Copy_readme.txt[2019/03/14 8:14:56]
Other changes:
- Supported IM 350F/350/430F/430Fb.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.2.9
Rank C

Other changes:
- Support for SMB v2/3.

----------------------------------------
Version 1.2.7
Other Change:
- Job Counter is implemented.

----------------------------------------
Version 1.2.5
Symptom corrected:
- When the mail server is set to Outlook for Office365 and "SSL for
encrypted communication" is set to "On", the sending test fails.

Other changes:
- When a user logs in to the device and scans to folder using the
"ID Card Scan and Copy" application, the user authentication dialog
is displayed.

----------------------------------------
Version 1.2.3
Symptom corrected:
- When configuring the settings of ID Card Scan and Copy > SMTP Settings >
Emailing Authentication to "Off", email might not be able to be sent.

----------------------------------------
Version 1.2.2
New model supported.

Symptom corrected:
A sent file becomes corrupt when the file format is set to PDF and
the display language is set to one of the following 18 languages:
- German
- French
- Italian
- Dutch
- Spanish
- Russian
- Brazilian Portuguese
- Swedish
- Danish
- Portuguese
- Norwegian

D3CM5500J_forEDC_ID_Card_Scan_and_Copy_readme.txt[2019/03/14 8:14:56]
- Czech
- Hungarian
- Turkish
- Polish
- Finnish
- Catalan
- Greek

----------------------------------------
Version 1.2.0
Additional model information:
Support for the Model Lef-C1b.

Symptom corrected:
The destination folder setting cannot be configured if:
- The network environment is using NTLMv1.
- "Select items not from list." is chosen on the "Select destination"
screen shown during startup.

----------------------------------------
Version 1.1.1
Other changes:
The application name has been changed from "ID Card Scan & Copy"
to "ID Card Scan and Copy".

----------------------------------------
Version 1.1.0
Other changes:
- Support for languages that are available on the device.

----------------------------------------
Version 1.0.0
Other changes:
- 1st mass production
- Initial release via the Application Site.

D3CM5500J_forEDC_ID_Card_Scan_and_Copy_readme.txt[2019/03/14 8:14:56]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/11
------------------------------------------------------------------------
[Program Name] Shared Folder Print
------------------------------------------------------------------------
[Version] 2.0.5
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5501H_forEDC
[File Information]
File Name D3CM5501H_forEDC.zip
File Type Module for Service
Size 6.15 MB ( 6446565 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

D3CM5501H_forEDC_Shared_Folder_Print_readme.txt[2019/03/14 8:15:17]
Other changes:
- Supported IM 350F/350/430F/430Fb.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 2.0.4
Rank C

Other changes:
- Support for SMB v2/3.

----------------------------------------
Version 2.0.3
Symptom Corrected:
- When a username with more than eight bytes logs in to the device
under any user authentication environment, printing cannot be conducted.

----------------------------------------
Version 2.0.2
Symptom Corrected:
JPEG files cannot be printed or previewed when the display language
is set to one of the following 18 languages:
- German
- French
- Italian
- Dutch
- Spanish
- Russian
- Brazilian Portuguese
- Swedish
- Danish
- Portuguese
- Norwegian
- Czech
- Hungarian
- Turkish
- Polish
- Finnish
- Catalan
- Greek

----------------------------------------
Version 2.0.1
Symptom corrected:
- When an application is used on the Model CH-C2 with a cover feeder option,
the application might close unexpectedly.

----------------------------------------
Version 2.0.0
Specification Change:
Introduced support for the following:

D3CM5501H_forEDC_Shared_Folder_Print_readme.txt[2019/03/14 8:15:17]
- Setting the printing conditions per document.
- Finishing with stapling, punching, booklet, and folding.
- Linux OS.
- User code authentication.

----------------------------------------
Version 1.1.1
Symptom corrected:
- When launching Shared Folder Print, the application boot counter
is displayed.

----------------------------------------
Version 1.1.0
Other changes:
- Support for languages that are available on the device.

----------------------------------------
Version 1.0.0
Other changes:
- 1st mass production
- Initial release via the Application Site.

D3CM5501H_forEDC_Shared_Folder_Print_readme.txt[2019/03/14 8:15:17]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/11
------------------------------------------------------------------------
[Program Name] ID Card Copy
------------------------------------------------------------------------
[Version] 1.10.5
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5506B_forEDC
[File Information]
File Name D3CM5506B_forEDC.zip
File Type Module for Service
Size 4.73 MB ( 4960957 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

D3CM5506B_forEDC_ID_Card_Copy_readme.txt[2019/03/14 8:15:00]
Other changes:
- Supported IM 350F/350/430F/430Fb.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.10.4
Other Changes:
- Job Counter is implemented.

----------------------------------------
Version 1.10
Other changes:
- 1st mass production
- Initial release via the Application Site.

D3CM5506B_forEDC_ID_Card_Copy_readme.txt[2019/03/14 8:15:00]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/11
------------------------------------------------------------------------
[Program Name] Scan to Folder Helper
------------------------------------------------------------------------
[Version] 1.10.5
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5507C_forEDC
[File Information]
File Name D3CM5507C_forEDC.zip
File Type Module for Service
Size 3.55 MB ( 3723222 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

D3CM5507C_forEDC_Scan_to_Folder_Helper_readme.txt[2019/03/14 8:14:58]
Other changes:
- Supported IM 350F/350/430F/430Fb.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.10.4
Rank C

Other changes:
- Support for SMB v2/3.

----------------------------------------
Version 1.10.2
Other Changes:
- Job Counter is implemented.

----------------------------------------
Version 1.10
Specification changes:
1. Added support for including user code authentication when conducting
destination information sheet printing on all applicable devices
except for the MP C306 and C406.
2. Support for Korean.
3. Support for Thai.
4. Added support for the hardware ten-key pad.
5. Removed a Menu key.

Symptom corrected:
- When the back button on the main screen of an application is pressed,
the application is not exited.

Other changes:
- Support for installing from the Application Site.

D3CM5507C_forEDC_Scan_to_Folder_Helper_readme.txt[2019/03/14 8:14:58]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/09/17
------------------------------------------------------------------------
[Program Name] ID Card Scan and Copy
------------------------------------------------------------------------
[Version] 2.0.1
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5513A_forEDC
[File Information]
File Name D3CM5513A_forEDC.zip
File Type Module for Service
Size 5.86 MB ( 6147288 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

D3CM5513A_forEDC_ID_Card_Scan_and_Copy_readme.txt[2019/11/25 12:19:17]
Symptom corrected:
- A problem that address book users with a specific name could not
be set as destinations in ID Card Scan and Copy apps was corrected.
- A problem that preference of ID Card Scan and Copy apps were not
exported when exporting device preferences was corrected.

Other changes:
- Supported Arabic.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 2.0.0
Rank D

Initial release

D3CM5513A_forEDC_ID_Card_Scan_and_Copy_readme.txt[2019/11/25 12:19:17]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/05
------------------------------------------------------------------------
[Program Name] Bank1_DENIS
------------------------------------------------------------------------
[Version] 01.000:01
------------------------------------------------------------------------
[PCB No.] D3EQ5150B
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3EQ5260A_BANK1
[File Information]
File Name D3EQ5260A_BANK1.fwu
File Type Module for Service
Size 0.13 MB ( 131572 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/06
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D3EQ5260A_BANK1_Bank1_DENIS_readme.txt[2019/03/06 13:23:41]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D3EQ5260A_BANK1_Bank1_DENIS_readme.txt[2019/03/06 13:23:41]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/09/17
------------------------------------------------------------------------
[Program Name] ID Card Copy
------------------------------------------------------------------------
[Version] 2.0.1
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5519A_forEDC
[File Information]
File Name D3CM5519A_forEDC.zip
File Type Module for Service
Size 8.27 MB ( 8672953 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

D3CM5519A_forEDC_ID_Card_Copy_readme.txt[2019/11/25 12:19:16]
Other changes:
- Supported Arabic.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 2.0.0
Rank D

Initial release

D3CM5519A_forEDC_ID_Card_Copy_readme.txt[2019/11/25 12:19:16]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/05
------------------------------------------------------------------------
[Program Name] Bank2_DENIS
------------------------------------------------------------------------
[Version] 01.000:01
------------------------------------------------------------------------
[PCB No.] D3EQ5150B
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3EQ5260A_BANK2
[File Information]
File Name D3EQ5260A_BANK2.fwu
File Type Module for Service
Size 0.13 MB ( 131572 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/06
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D3EQ5260A_BANK2_Bank2_DENIS_readme.txt[2019/03/06 13:23:42]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D3EQ5260A_BANK2_Bank2_DENIS_readme.txt[2019/03/06 13:23:42]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/05
------------------------------------------------------------------------
[Program Name] Bank3_DENIS
------------------------------------------------------------------------
[Version] 01.000:01
------------------------------------------------------------------------
[PCB No.] D3EQ5150B
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3EQ5260A_BANK3
[File Information]
File Name D3EQ5260A_BANK3.fwu
File Type Module for Service
Size 0.13 MB ( 131572 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/06
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D3EQ5260A_BANK3_Bank3_DENIS_readme.txt[2019/03/06 13:23:42]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D3EQ5260A_BANK3_Bank3_DENIS_readme.txt[2019/03/06 13:23:42]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/05
------------------------------------------------------------------------
[Program Name] Bank1_ELBA
------------------------------------------------------------------------
[Version] 01.000:01
------------------------------------------------------------------------
[PCB No.] D3ER5150B
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3ER5260A_BANK1
[File Information]
File Name D3ER5260A_BANK1.fwu
File Type Module for Service
Size 0.13 MB ( 131572 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/06
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D3ER5260A_BANK1_Bank1_ELBA_readme.txt[2019/03/06 13:23:41]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D3ER5260A_BANK1_Bank1_ELBA_readme.txt[2019/03/06 13:23:41]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/05
------------------------------------------------------------------------
[Program Name] Bank2_ELBA
------------------------------------------------------------------------
[Version] 01.000:01
------------------------------------------------------------------------
[PCB No.] D3ER5150B
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3ER5260A_BANK2
[File Information]
File Name D3ER5260A_BANK2.fwu
File Type Module for Service
Size 0.13 MB ( 131572 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/06
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D3ER5260A_BANK2_Bank2_ELBA_readme.txt[2019/03/06 13:23:44]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D3ER5260A_BANK2_Bank2_ELBA_readme.txt[2019/03/06 13:23:44]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/05
------------------------------------------------------------------------
[Program Name] Bank3_ELBA
------------------------------------------------------------------------
[Version] 01.000:01
------------------------------------------------------------------------
[PCB No.] D3ER5150B
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3ER5260A_BANK3
[File Information]
File Name D3ER5260A_BANK3.fwu
File Type Module for Service
Size 0.13 MB ( 131572 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/06
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D3ER5260A_BANK3_Bank3_ELBA_readme.txt[2019/03/06 13:23:42]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D3ER5260A_BANK3_Bank3_ELBA_readme.txt[2019/03/06 13:23:42]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/06
------------------------------------------------------------------------
[Program Name] Java VM v12 for eDC
------------------------------------------------------------------------
[Version] 12.63.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3EM5750A_edc
[File Information]
File Name D3EM5750A_edc.ifu
File Type Module for Service
Size 64.02 MB ( 67133224 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

D3EM5750A_edc_Java_VM_v12_for_eDC_readme.txt[2019/03/14 8:14:59]
1st Mass production

------------------------------------------------------------------------
[Modification history]

D3EM5750A_edc_Java_VM_v12_for_eDC_readme.txt[2019/03/14 8:14:59]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/06
------------------------------------------------------------------------
[Program Name] Java VM v12 UpdateTool
------------------------------------------------------------------------
[Version] 12.63.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3EM5750A_upd
[File Information]
File Name D3EM5750A_upd.exe
File Type Module for Service
Size 63.71 MB ( 66809098 byte )
Check Sum -8Bit Sum: D776
-16Bit Sum(Little Endian): 5339
-16Bit Sum(Big Endian): FA3D
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================

D3EM5750A_upd_Java_VM_v12_UpdateTool_readme.txt[2019/03/14 8:14:58]
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

D3EM5750A_upd_Java_VM_v12_UpdateTool_readme.txt[2019/03/14 8:14:58]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/09/30
------------------------------------------------------------------------
[Program Name] IRIPS PDF
------------------------------------------------------------------------
[Version] 1.05
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5581E
[File Information]
File Name M0BQ5581E.fwu
File Type Module for Service
Size 2.83 MB ( 2964224 byte )
[File Information]
File Name M0BQ5581E.rfu
File Type Module for Remote Upgrade
Size 2.83 MB ( 2969856 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

M0BQ5581E_IRIPS_PDF_readme.txt[2019/11/25 12:43:33]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- SC899 might occur when printing a PDF file that contains downloaded fonts.
- When File System Operation is permitted for PDF and PostScript,
some directories that should not be accessed might become accessible.
- If the font information of a PDF file is stored inside a Stream object,
an invalid font error might occur, and the file might not print correctly.
- An image containing axial shading might not print as expected.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.04
Rank C

Symptom corrected:
- Particular PDF file cannot be printed if PDF/PS is prohibited.

----------------------------------------
Version 1.03
Rank C

Symptom corrected:
- The minus sign (-) in a PDF file might not be printed via PDF Direct.

----------------------------------------
Version 1.02
Rank D

1st Mass production

M0BQ5581E_IRIPS_PDF_readme.txt[2019/11/25 12:43:33]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/08/27
------------------------------------------------------------------------
[Program Name] Option IPDS
------------------------------------------------------------------------
[Version] 8.804
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M5435712
[File Information]
File Name M5435712.fwu
File Type Module for Service
Size 8.98 MB ( 9418824 byte )
[File Information]
File Name M5435712.rfu
File Type Module for Remote Upgrade
Size 8.99 MB ( 9425152 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///D/pdf/copier/im350/firmware_notes/M5435712_Option_IPDS_readme.txt[2020/01/17 10:23:14]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

file:///D/pdf/copier/im350/firmware_notes/M5435712_Option_IPDS_readme.txt[2020/01/17 10:23:14]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/05
------------------------------------------------------------------------
[Program Name] PS3
------------------------------------------------------------------------
[Version] 1.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M5435731
[File Information]
File Name M5435731.fwu
File Type Module for Service
Size 0.01 MB ( 1352 byte )
[File Information]
File Name M5435731.rfu
File Type Module for Remote Upgrade
Size 0.01 MB ( 8448 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

M5435731_PS3_readme.txt[2019/03/06 14:52:19]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

M5435731_PS3_readme.txt[2019/03/06 14:52:19]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/09/30
------------------------------------------------------------------------
[Program Name] PDF
------------------------------------------------------------------------
[Version] 1.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M5435733B
[File Information]
File Name M5435733B.fwu
File Type Module for Service
Size 4.30 MB ( 4511020 byte )
[File Information]
File Name M5435733B.rfu
File Type Module for Remote Upgrade
Size 4.31 MB ( 4518144 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///D/pdf/copier/im350/firmware_notes/M5435733B_PDF_readme.txt[2020/01/17 10:21:52]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- When printing a PDF file that contains transparent images via PDF Direct,
the output might be distorted.
- SC899 might occur when direct printing a PDF file that contains
JBIG2-compressed data.
- SC899 might occur when printing a webpage on Linux.
- Printing a PDF with a transparent image and a shaded image might
take a long time due to memory release processing, and the shaded
image might not be printed as expected.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.01
Rank D

1st Mass production

file:///D/pdf/copier/im350/firmware_notes/M5435733B_PDF_readme.txt[2020/01/17 10:21:52]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2019/03/05
------------------------------------------------------------------------
[Program Name] XPS
------------------------------------------------------------------------
[Version] 1.18
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M5435737
[File Information]
File Name M5435737.fwu
File Type Module for Service
Size 1.97 MB ( 2064876 byte )
[File Information]
File Name M5435737.rfu
File Type Module for Remote Upgrade
Size 1.98 MB ( 2072832 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 1st Mass Production
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

M5435737_XPS_readme.txt[2019/03/06 14:52:18]
========================================================================
[Modifications made:]
Rank D

1st Mass production

------------------------------------------------------------------------
[Modification history]

M5435737_XPS_readme.txt[2019/03/06 14:52:18]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/04/09
------------------------------------------------------------------------
[Program Name] Java VM v12 for eDC
------------------------------------------------------------------------
[Version] 12.69.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3EM5750C_edc
[File Information]
File Name D3EM5750C_edc.ifu
File Type Module for Service
Size 59.67 MB ( 62564280 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2020/04
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

file:///C/...やる)/■ふぁーむうぇあのーと/りりーすのーとコピー/後で調べる/D3EM5750C_edc_Java_VM_v12_for_eDC_readme.txt[2020/06/02 19:12:00]
Symptom corrected:
- When the amount of file descriptor, used on JavaVM, is 256 or more,
a certain print command from the SDK application might cause an error.
- Application installation using Remote Install Manager through IEEE
802.11 Interface Unit might be failed.
- Implemented vulnerability countermeasures against the ROBOT attack
and the use of Static Key Ciphers.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 12.65.01
Rank D

1st Mass production

file:///C/...やる)/■ふぁーむうぇあのーと/りりーすのーとコピー/後で調べる/D3EM5750C_edc_Java_VM_v12_for_eDC_readme.txt[2020/06/02 19:12:00]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/04/09
------------------------------------------------------------------------
[Program Name] Java VM v12 UpdateTool
------------------------------------------------------------------------
[Version] 12.69.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3EM5750C_upd
[File Information]
File Name D3EM5750C_upd.exe
File Type Module for Service
Size 59.29 MB ( 62171156 byte )
Check Sum -8Bit Sum: EF94
-16Bit Sum(Little Endian): 1F36
-16Bit Sum(Big Endian): 645E
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2020/04
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================

file:///C/...)/■ふぁーむうぇあのーと/りりーすのーとコピー/後で調べる/D3EM5750C_upd_Java_VM_v12_UpdateTool_readme.txt[2020/06/02 19:13:27]
[Modifications made:]
Rank C

Symptom corrected:
- When the amount of file descriptor, used on JavaVM, is 256 or more,
a certain print command from the SDK application might cause an error.
- Application installation using Remote Install Manager through IEEE
802.11 Interface Unit might be failed.
- Implemented vulnerability countermeasures against the ROBOT attack
and the use of Static Key Ciphers.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 12.65.01
Rank D

1st Mass production

file:///C/...)/■ふぁーむうぇあのーと/りりーすのーとコピー/後で調べる/D3EM5750C_upd_Java_VM_v12_UpdateTool_readme.txt[2020/06/02 19:13:27]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/03/13
------------------------------------------------------------------------
[Program Name] CheetahSystem
------------------------------------------------------------------------
[Version] 1.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) CHN(all)
[Firmware No.] D0A41447A
[File Information]
File Name D0A41447A.zip
File Type Module for Service
Size 203.56 MB ( 213448992 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank D

file:///C/...マニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/ふぁーむうぇあコピー/D0A41447A_CheetahSystem_readme.txt[2020/06/05 17:15:25]
1st Mass production

------------------------------------------------------------------------
[Modification history]

file:///C/...マニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/ふぁーむうぇあコピー/D0A41447A_CheetahSystem_readme.txt[2020/06/05 17:15:25]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/03/16
------------------------------------------------------------------------
[Program Name] CheetahSystem
------------------------------------------------------------------------
[Version] 1.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) CHN(all)
[Firmware No.] D0A41447B
[File Information]
File Name D0A41447B.zip
File Type Module for Service
Size 203.75 MB ( 213650632 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

file:///C/...マニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/ふぁーむうぇあコピー/D0A41447B_CheetahSystem_readme.txt[2020/06/05 17:16:24]
Symptom corrected:
- The SmartSDK API for setting the Function Priority might return
the wrong character code and text in the application might be garbled.
- If an authentication application installed, the following issues might occur.
Some applications cannot be used after login.
Force quit the authentication application, then login.
- If paper is repeatedly inserted and removed from the bypass paper tray
within a short space of time, the Bypass Tray Paper Settings
might not be able to open.
- If the Screen Startup Mode is set to 'Quick', the Bypass Tray Paper Settings
might not be able to open immediately after the machine is turned on.
- The envelope name is displayed as "Yoh/Yoh Chou Envelope"on
the Paper Orientation screen of the Bypass Tray Paper Settings.
- Descriptions might be displayed in English in Smart Integration
application, when Brazilian Portuguese is selected.
- Remote config API might not be available when "Machine Management"
in the "Administrator Authentication Management" is disabled.
- English stays as the display language of the Web Browser NX
even when another display language is selected.

Other changes:
- The startup method for RemoteConnect Support has changed.
Before: Press and hold the top banner for five seconds and then release it.
New: Press and hold the top banner for five seconds.
- SOP and application setting is stored to HDD.
- Supported RICOH SmartSDK v2.60
- Error LED is indicated, and the status in "Check Status" is displayed,
for SmartSDK application.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/...マニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/ふぁーむうぇあコピー/D0A41447B_CheetahSystem_readme.txt[2020/06/05 17:16:24]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/03/16
------------------------------------------------------------------------
[Program Name] CheetahSystem
------------------------------------------------------------------------
[Version] 1.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) CHN(all)
[Firmware No.] D0A41447C
[File Information]
File Name D0A41447C.zip
File Type Module for Service
Size 203.79 MB ( 213686808 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank B

file:///C/...マニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/ふぁーむうぇあコピー/D0A41447C_CheetahSystem_readme.txt[2020/06/05 17:16:46]
Symptom corrected:
- Setting the Function Priority remotely with the SmartSDK WebAPI
might fail if an application other than the home screen is currently
displayed on the operation panel.
- When turning on the machine, the error message,
"Unfortunately, Setting2 has stopped", might appear.
- When opening the detailed sound settings from the Installation Settings screen,
an error message might appear and the Installation Settings might close unexpectedly.
- Cannot login with some specific authentication application
during the daylight-saving time.
- If the machine goes into sleep mode while internally updating MovieData
after updating the firmware, videos on replacing supplies will not play normally.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.01
Rank C

Symptom corrected:
- The SmartSDK API for setting the Function Priority might return
the wrong character code and text in the application might be garbled.
- If an authentication application installed, the following issues might occur.
Some applications cannot be used after login.
Force quit the authentication application, then login.
- If paper is repeatedly inserted and removed from the bypass paper tray
within a short space of time, the Bypass Tray Paper Settings
might not be able to open.
- If the Screen Startup Mode is set to 'Quick', the Bypass Tray Paper Settings
might not be able to open immediately after the machine is turned on.
- The envelope name is displayed as "Yoh/Yoh Chou Envelope"on
the Paper Orientation screen of the Bypass Tray Paper Settings.
- Descriptions might be displayed in English in Smart Integration
application, when Brazilian Portuguese is selected.
- Remote config API might not be available when "Machine Management"
in the "Administrator Authentication Management" is disabled.
- English stays as the display language of the Web Browser NX
even when another display language is selected.

Other changes:
- The startup method for RemoteConnect Support has changed.
Before: Press and hold the top banner for five seconds and then release it.
New: Press and hold the top banner for five seconds.
- SOP and application setting is stored to HDD.
- Supported RICOH SmartSDK v2.60
- Error LED is indicated, and the status in "Check Status" is displayed,
for SmartSDK application.

----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/...マニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/ふぁーむうぇあコピー/D0A41447C_CheetahSystem_readme.txt[2020/06/05 17:16:46]
file:///C/...マニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/ふぁーむうぇあコピー/D0A41447C_CheetahSystem_readme.txt[2020/06/05 17:16:46]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/03/16
------------------------------------------------------------------------
[Program Name] CheetahSystem
------------------------------------------------------------------------
[Version] 1.03.1
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) CHN(all)
[Firmware No.] D0A41447D
[File Information]
File Name D0A41447D.zip
File Type Module for Service
Size 204.07 MB ( 213984341 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

file:///C/...マニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/ふぁーむうぇあコピー/D0A41447D_CheetahSystem_readme.txt[2020/06/05 17:17:08]
Symptom corrected:
- When following are executed in SOP-G2 models, the setting items
for Web Browser NX will be changed to default values.
Then the web application such as RSI application cannot be used.
Updating CheetahSystem v1.00 or less to v1.01 or later.
Downgrading CheetahSystem v1.01 or later to v1.00 or less.
* Changed setting items and default values are:
Save Password: Do not Save
Save Form Data: Do not Save
Save Cookie: Do not Save
Store Application Cache: Do not Save
Restrict Usage for Users: Do not Restrict
Check SSL Error: Check
- The update might fail with error 235, when the package firmware
update is conducted.
- Application name is displayed only in English on the Installation
screen of Web Image Monitor.
- Remote Update/Uninstallation of SOP native application from
Web Image Monitor may be failed.
- The machine is stalled after remote update or installation
(offline operation > Install [2-visit course]) of CAP/ELP via CLA
is finished.
- Some applications developed with Ricoh HeadQuarter may not work properly.
- When the User's Own Customization setting is allowed,
the display language may not switch to user own language after login.
- When the User's Own Customization setting is allowed, normal startup will start,
even if the Control Panel Startup Mode is set to "quick".
- The device with CAP/ELP may not be found via Configuration Tool
after system reset of device.

Other changes:
- Supported RICOH SmartSDK v2.60

Supported:
- Return bottuon on SOP is supported for SmartSDK.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.02
Rank B

Symptom corrected:
- Setting the Function Priority remotely with the SmartSDK WebAPI
might fail if an application other than the home screen is currently
displayed on the operation panel.
- When turning on the machine, the error message,
"Unfortunately, Setting2 has stopped", might appear.
- When opening the detailed sound settings from the Installation Settings screen,
an error message might appear and the Installation Settings might close unexpectedly.
- Cannot login with some specific authentication application
during the daylight-saving time.
- If the machine goes into sleep mode while internally updating MovieData
after updating the firmware, videos on replacing supplies will not play normally.

----------------------------------------
Version 1.01

file:///C/...マニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/ふぁーむうぇあコピー/D0A41447D_CheetahSystem_readme.txt[2020/06/05 17:17:08]
Rank C

Symptom corrected:
- The SmartSDK API for setting the Function Priority might return
the wrong character code and text in the application might be garbled.
- If an authentication application installed, the following issues might occur.
Some applications cannot be used after login.
Force quit the authentication application, then login.
- If paper is repeatedly inserted and removed from the bypass paper tray
within a short space of time, the Bypass Tray Paper Settings
might not be able to open.
- If the Screen Startup Mode is set to 'Quick', the Bypass Tray Paper Settings
might not be able to open immediately after the machine is turned on.
- The envelope name is displayed as "Yoh/Yoh Chou Envelope"on
the Paper Orientation screen of the Bypass Tray Paper Settings.
- Descriptions might be displayed in English in Smart Integration
application, when Brazilian Portuguese is selected.
- Remote config API might not be available when "Machine Management"
in the "Administrator Authentication Management" is disabled.
- English stays as the display language of the Web Browser NX
even when another display language is selected.

Other changes:
- The startup method for RemoteConnect Support has changed.
Before: Press and hold the top banner for five seconds and then release it.
New: Press and hold the top banner for five seconds.
- SOP and application setting is stored to HDD.
- Supported RICOH SmartSDK v2.60
- Error LED is indicated, and the status in "Check Status" is displayed,
for SmartSDK application.

----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/...マニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/ふぁーむうぇあコピー/D0A41447D_CheetahSystem_readme.txt[2020/06/05 17:17:08]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/03/24
------------------------------------------------------------------------
[Program Name] Printer
------------------------------------------------------------------------
[Version] 1.08
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5574D
[File Information]
File Name M0BQ5574D.fwu
File Type Module for Service
Size 4.06 MB ( 4254788 byte )
[File Information]
File Name M0BQ5574D.rfu
File Type Module for Remote Upgrade
Size 4.06 MB ( 4260096 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/01
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...ービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/ふぁーむうぇあコピー/M0BQ5574D_Printer_readme.txt[2020/06/16 17:05:36]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- A message might be incorrectly displayed stating that the storage
limit for Locked Print has been reached.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.05
Rank C

Symptom corrected:
- If both Device Manager NX and Enhanced Locked Print NX v2 are installed,
printing a job via Enhanced Locked Print NX v2 or logging out might fail.

Other changes:
- Device information can be checked via a USB connection.

----------------------------------------
Version 1.04
Rank C

Symptom corrected:
- An IPDS form with a custom media type might be missing from the
Tray Form List for Bypass Tray in the IPDS menu on the WIM.
- An IPDS form with a custom size might be missing from the Tray
Form List in the IPDS menu on the WIM.

----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/...ービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/ふぁーむうぇあコピー/M0BQ5574D_Printer_readme.txt[2020/06/16 17:05:36]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/20
------------------------------------------------------------------------
[Program Name] LegacyUI
------------------------------------------------------------------------
[Version] 1.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(ja,en,f,e,d,i,nl,s,n,dk,sf,p,pl,h,cz,ru,sc,tc,kr,br,tr,ca,gr)
[Firmware No.] D0A41411C__forEDC
[File Information]
File Name D0A41411C__forEDC.zip
File Type Module for Service
Size 11.42 MB ( 11969767 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

file:///C/...ニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A41411C__forEDC_LegacyUI_readme.txt[2020/06/17 14:56:01]
Other changes:
- Minor bug fix for manufacturing process

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/...ニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A41411C__forEDC_LegacyUI_readme.txt[2020/06/17 14:56:01]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/20
------------------------------------------------------------------------
[Program Name] LegacyUI
------------------------------------------------------------------------
[Version] 1.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(ja,en,f,e,d,i,nl,s,n,dk,sf,p,pl,h,cz,ru,sc,tc,kr,br,tr,ca,gr)
[Firmware No.] D0A41411D_forEDC
[File Information]
File Name D0A41411D_forEDC.zip
File Type Module for Service
Size 11.42 MB ( 11969906 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

file:///C/...ニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A41411D_forEDC_LegacyUI_readme.txt[2020/06/17 14:56:25]
Symptom corrected:
- Implementation of countermeasures for the following vulnerabilities:
CVE-2005-2096, CVE-2005-1849, CVE-2004-0797, and CVE-2016-9840.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.01
Rank C

Other changes:
- Minor bug fix for manufacturing process

----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/...ニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A41411D_forEDC_LegacyUI_readme.txt[2020/06/17 14:56:25]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/20
------------------------------------------------------------------------
[Program Name] CheetahSystem
------------------------------------------------------------------------
[Version] 1.04
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) CHN(all)
[Firmware No.] D0A41447E
[File Information]
File Name D0A41447E.zip
File Type Module for Service
Size 204.08 MB ( 213988323 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A41447E_CheetahSystem_readme.txt[2020/06/17 14:56:42]
Symptom corrected:
- Implementation of countermeasures for the following vulnerabilities:
CVE-2012-6638,CVE-2012-6689,CVE-2012-6704,CVE-2013-1858,CVE-2013-6282,
CVE-2014-7911,CVE-2014-7923,CVE-2014-7926,CVE-2014-7940,CVE-2014-8962,
CVE-2014-9529,CVE-2014-9654,CVE-2014-9911,CVE-2015-0973,CVE-2015-1474,
CVE-2015-1528,CVE-2015-1536,CVE-2015-2686,CVE-2015-3288,CVE-2015-3416,
CVE-2015-3835,CVE-2015-3842,CVE-2015-3849,CVE-2015-3863,CVE-2015-3865,
CVE-2015-5364,CVE-2015-6609,CVE-2015-8019,CVE-2015-8126,CVE-2015-8472,
CVE-2015-8539,CVE-2015-8540,CVE-2016-3134,CVE-2016-3841,CVE-2016-6724,
CVE-2016-6728,CVE-2016-6737,CVE-2016-7117,CVE-2016-7910,CVE-2016-7911,
CVE-2016-9754,CVE-2016-9794,CVE-2017-0427,CVE-2017-1000111,CVE-2017-1000253,
CVE-2017-1000365,CVE-2017-10661,CVE-2017-14491,CVE-2017-14952,CVE-2017-16527,
CVE-2017-16531,CVE-2017-17558,CVE-2017-17806,CVE-2017-18509,CVE-2017-9074,
CVE-2017-9077,CVE-2018-1092,CVE-2018-20169,CVE-2018-20843,CVE-2018-9568,
CVE-2019-15927,CVE-2019-8912,CVE-2012-0444,CVE-2014-1704,CVE-2015-6610,
CVE-2015-6616,CVE-2016-0803,CVE-2016-0810,CVE-2016-0826,CVE-2016-0827,
CVE-2016-1503,CVE-2016-2439,CVE-2016-2448,CVE-2016-2463,CVE-2016-3821,
CVE-2016-4477,CVE-2017-0541,CVE-2017-0592,CVE-2017-0714,CVE-2017-0745,
CVE-2017-0756,CVE-2017-0767,CVE-2017-0770,CVE-2017-0775,CVE-2017-0809,
CVE-2017-0841,CVE-2017-0855,CVE-2017-13176,CVE-2017-13208,CVE-2017-13234,
CVE-2017-13255,CVE-2017-13256,CVE-2017-13258,CVE-2017-13259,CVE-2017-13260,
CVE-2017-13261,CVE-2017-13266,CVE-2017-13267,CVE-2017-13274,CVE-2017-13281,
CVE-2017-13282,CVE-2017-13283,CVE-2017-13285,CVE-2018-9355,CVE-2018-9357,
CVE-2018-9359,CVE-2018-9360,CVE-2018-9361,CVE-2018-9455,CVE-2018-9503,
CVE-2018-9523,CVE-2018-9527,CVE-2018-9531,CVE-2018-9549,CVE-2018-9558,
CVE-2016-0838,CVE-2016-0841,CVE-2016-2428,CVE-2016-2429,CVE-2016-2506.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.03.1
Rank C

Symptom corrected:
- When following are executed in SOP-G2 models, the setting items
for Web Browser NX will be changed to default values.
Then the web application such as RSI application cannot be used.
Updating CheetahSystem v1.00 or less to v1.01 or later.
Downgrading CheetahSystem v1.01 or later to v1.00 or less.
* Changed setting items and default values are:
Save Password: Do not Save
Save Form Data: Do not Save
Save Cookie: Do not Save
Store Application Cache: Do not Save
Restrict Usage for Users: Do not Restrict
Check SSL Error: Check
- The update might fail with error 235, when the package firmware
update is conducted.
- Application name is displayed only in English on the Installation
screen of Web Image Monitor.
- Remote Update/Uninstallation of SOP native application from
Web Image Monitor may be failed.
- The machine is stalled after remote update or installation
(offline operation > Install [2-visit course]) of CAP/ELP via CLA

file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A41447E_CheetahSystem_readme.txt[2020/06/17 14:56:42]
is finished.
- Some applications developed with Ricoh HeadQuarter may not work properly.
- When the User's Own Customization setting is allowed,
the display language may not switch to user own language after login.
- When the User's Own Customization setting is allowed, normal startup will start,
even if the Control Panel Startup Mode is set to "quick".
- The device with CAP/ELP may not be found via Configuration Tool
after system reset of device.

Other changes:
- Supported RICOH SmartSDK v2.60

Supported:
- Return bottuon on SOP is supported for SmartSDK.

----------------------------------------
Version 1.02
Rank B

Symptom corrected:
- Setting the Function Priority remotely with the SmartSDK WebAPI
might fail if an application other than the home screen is currently
displayed on the operation panel.
- When turning on the machine, the error message,
"Unfortunately, Setting2 has stopped", might appear.
- When opening the detailed sound settings from the Installation Settings screen,
an error message might appear and the Installation Settings might close unexpectedly.
- Cannot login with some specific authentication application
during the daylight-saving time.
- If the machine goes into sleep mode while internally updating MovieData
after updating the firmware, videos on replacing supplies will not play normally.

----------------------------------------
Version 1.01
Rank C

Symptom corrected:
- The SmartSDK API for setting the Function Priority might return
the wrong character code and text in the application might be garbled.
- If an authentication application installed, the following issues might occur.
Some applications cannot be used after login.
Force quit the authentication application, then login.
- If paper is repeatedly inserted and removed from the bypass paper tray
within a short space of time, the Bypass Tray Paper Settings
might not be able to open.
- If the Screen Startup Mode is set to 'Quick', the Bypass Tray Paper Settings
might not be able to open immediately after the machine is turned on.
- The envelope name is displayed as "Yoh/Yoh Chou Envelope"on
the Paper Orientation screen of the Bypass Tray Paper Settings.
- Descriptions might be displayed in English in Smart Integration
application, when Brazilian Portuguese is selected.
- Remote config API might not be available when "Machine Management"
in the "Administrator Authentication Management" is disabled.
- English stays as the display language of the Web Browser NX
even when another display language is selected.

Other changes:

file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A41447E_CheetahSystem_readme.txt[2020/06/17 14:56:42]
- The startup method for RemoteConnect Support has changed.
Before: Press and hold the top banner for five seconds and then release it.
New: Press and hold the top banner for five seconds.
- SOP and application setting is stored to HDD.
- Supported RICOH SmartSDK v2.60
- Error LED is indicated, and the status in "Check Status" is displayed,
for SmartSDK application.

----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A41447E_CheetahSystem_readme.txt[2020/06/17 14:56:42]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/20
------------------------------------------------------------------------
[Program Name] System/Copy
------------------------------------------------------------------------
[Version] 1.09
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45540F
[File Information]
File Name D0A45540F.fwu
File Type Module for Service
Size 28.50 MB ( 29879784 byte )
[File Information]
File Name D0A45540F.rfu
File Type Module for Remote Upgrade
Size 28.50 MB ( 29884672 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/01
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45540F_System_Copy_readme.txt[2020/06/17 14:56:58]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- Implementation of countermeasures for the CSRF vulnerability.
- Login screen freezes if attempted to gain authentication with Enhanced Locked
Print NX / FlexRelease Server while operating the control panel.

Other changes:
- Some SP numbers are added based on field request.
This firmware is dependent on the following firmware modules, update them to
the required version:
- System/Copy v1.09 (D0A45540F) or later
- Engine v1.10:09 (D0A45551C) or later
- The following SP modes are added: SP1-957-001 to 002
This firmware is dependent on the following firmware modules, update them to
the required version:
- System/Copy v1.09 (D0A45540F) or later
- Engine v1.10:09 (D0A45551C) or later
- Implementation of countermeasures for the three vulnerabilities listed below.
(The following firmware updates are required for the countermeasures to take effect:
System/Copy v1.09, Printer v1.04, Web Support v1.03, Web Uapl v1.01.)
1. A URL for Remote Panel Operation might leak, and there is a risk that an
unauthenticated user could operate the device remotely.
2. There is an XSS vulnerability.
3. The Web Image Monitor sets session cookies without the HttpOnly attribute,
and there is a risk the cookies might leak data.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.08
Rank C

Symptom corrected:
- When printing multiple jobs while "Enhanced Print Volume Use
Limitation" is enabled, the printing might be slower.

----------------------------------------
Version 1.07
Rank C

Other changes:
- SC542-01 and SC552-01 (type A) are removed. SC546-00 and SC556-00
(type D) are added for detecting the low voltage.
This firmware is dependent on the following firmware modules,
update them to the required version:
- System/Copy v1.07 (D0A45540D) or later
- Engine v1.11:09 (D0A45551D) or later

----------------------------------------
Version 1.06
Rank C

file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45540F_System_Copy_readme.txt[2020/06/17 14:56:58]
Symptom corrected:
- SC569-01 or 02 may occur if the main switch is turned on when the new fusing unit is installed.
- SC865-56 might occur during an OCR scan job with paper of varying sizes.
- Color registration shift occurs.
- When JavaVM isn't installed, the SSL/TLS settings in the Security menu on the WIM can't be reflected in the SSL
communication via port 51443.
- When the USB Device Server Option is enabled on the device, printing from USB might be much slower.
- The device might freeze after logging in to the device at address book screen under the following conditions;
1) Central Management is enabled.
2) Either of Windows authentication, LDAP authentication, or Custom authentication is set on User Authentication
Management.
- If the authentication setting is changed remotely while logging in from the panel, the operation might hang, and the
panel might stall.
- When the auto logout setting is enabled, logout failed message might appear during the printing.

Other changes:
- The default value of the Toner Call Threshold (SP5-507-081) is increased from 10% to 20% in order to prevent the
machine from having the down time.
- When the SP3-920-002 is set to "0" and SP5-930-001 is set to "1", if the temperature inside the machine is or less
than 36 degrees Celsius, a control to improve the toner yield starts working.
- The following SP modes are added: SP1-921 to 922, SP2-104-010 to 012, SP6-030-001 to 003
- The following SP mode is added: SP2-201-206
- The log storage function via @Remote has been removed. This firmware is dependent on the following firmware
modules. Please be sure to update all of them:
- System/Copy V1.06 (D0A45540C) or later
- Web Support V1.02 (D0A45568E) or later
- Engine logs can be collected via @Remote.

----------------------------------------
Version 1.05
Rank B

Symptom corrected:
- Images might print abnormally when making a combined copy if the
original is scanned in the ADF without specifying the document
size.

----------------------------------------
Version 1.04
Rank C

Symptom corrected:
- When the address book is backed up from an 11S or earlier model
and restored to a 14S or later model, SC899 might occur after
restoring the address book and restarting the machine.
- When "Application Authentication Settings" is enabled, SC899 might
occur after registering or updating an address book over 220 times
from Web Image Monitor.
- The language set for each user may not be applied when logging in
during Energy Saving mode.
- Cannot log-in with VM less application during daylight saving time.
(Only in the case that the daylight saving time period start at Oct-Dec)

Other changes:
- The Java VM version can be confirmed via @Remote.

file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45540F_System_Copy_readme.txt[2020/06/17 14:56:58]
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.
- Supported RICOH SmartSDK v2.60

----------------------------------------
Version 1.03
Rank C

Symptom corrected:
- Wireless direct connection might fail in Group Owner Mode.

Supported:
- The CPU is replaced with a newer model, so the BIOS is also
updated to support the new model.

----------------------------------------
Version 1.01
Rank C

Symptom corrected:
- Image log might not be sent and stay in the device.
- When scanning with ClearlightPDF JPEG2000, SC865-56 might occur.
- Preview screen of a print job on Enhanced Locked Print might freeze,
when the page is repeatedly moved.
- When the device receive a response of "ICMP unreachable" from a
network device, the communication might fail.
- The machine wakes up from the sleep mode when it receives a MIB
request from @Remote.
- SC845-04 might occur in the following situation:
1. Cheetah Firmware Update fails.
2. Then, the SD Card is removed, or the supply of electricity is
stopped while the machine is recovering via SD Card.
- The machine might stall if it enters energy saving mode during ARFU.
- When configuring a custom paper size in the Bypass Tray Paper
Settings, the measurements entered for the paper length and width
are reversed.
- The machine might not recover from SC995-002 after replacing the
NVRAM on the controller board.

Other changes:
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.
- A minor change only for the Japanese model.
- If a firmware package is unpublished (for example, when a bug is
discovered after release), it is possible to apply a previous
firmware package via ARFU, SFU, and Application Site.
(Previously, if a firmware package is unpublished then ARFU, SFU,
and Application Site would display an error dialog and the
function could not be used.)

----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45540F_System_Copy_readme.txt[2020/06/17 14:56:58]
file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45540F_System_Copy_readme.txt[2020/06/17 14:56:58]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/20
------------------------------------------------------------------------
[Program Name] Engine
------------------------------------------------------------------------
[Version] 1.10:09
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45551C
[File Information]
File Name D0A45551C.fwu
File Type Module for Service
Size 3.94 MB ( 4129268 byte )
[File Information]
File Name D0A45551C.rfu
File Type Module for Remote Upgrade
Size 3.95 MB ( 4137216 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/10
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45551C_Engine_readme.txt[2020/06/17 14:57:24]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- When feeding paper from an optional paper feed unit, a jam (J017) might occur.
- When a non-paper feed jam occurred during a duplex printing job to a small size
paper shorter than 215.9mm, the machine may not stop and the Jam21 may occur
after two minutes.
- When a non-paper feed jam occurred under the following conditions, the machine
may not stop and the Jam21 may occur after two minutes.
- Paper feed direction: Short edge feed
- Paper tray: Option tray
- Printing mode: More than 3 sheets duplex printing job
- The estimated toner near-end status might come earlier than expected.

Other changes:
- Some SP numbers are added based on field request.
This firmware is dependent on the following firmware modules, update them to
the required version:
- System/Copy v1.09 (D0A45540F) or later
- Engine v1.10:09 (D0A45551C) or later
- The following SP modes are added: SP1-957-001 to 002
This firmware is dependent on the following firmware modules, update them to
the required version:
- System/Copy v1.09 (D0A45540F) or later
- Engine v1.10:09 (D0A45551C) or later

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.09:09
Rank C

Symptom corrected:
- Due to the change of the Home Position Sensor and SPDF Feed
Sensor, SC121-00 or J004 might occur caused by the new sensor's
antistatic performance.
- If the machine placed in a high voltage environment, it might
misdetect unusual conditions 5 times consecutively and give SC541
error.
- An alert stating that the waste toner level is almost full might
appear earlier than expected.
- SC569-01may occur if the main switch is turned on when the new
fusing unit is installed.

Other changes:
- When the SP3-920-002 is set to "0" and SP5-930-001 is set to "1",
if the temperature inside the machine is or less than 36 degrees
Celsius, a control to improve the toner yield starts working.

----------------------------------------
Version 1.08:09
Rank C

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45551C_Engine_readme.txt[2020/06/17 14:57:24]
Symptom corrected:
- The Engine firmware cannot be updated at the same time as the Bank firmware.
- Opening and closing the cover after doing the output check for the
feed/fusing motor (SP5-804-013 to 22) might cause SC508 to occur.
- The PM Counter might be incorrect.

----------------------------------------
Version 1.07:09

Rank C

Symptom corrected:
- If a paper misfeed jam occurs during duplex printing, after
recovering from the jam, the misfed page is printed twice and
another page is missing.

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45551C_Engine_readme.txt[2020/06/17 14:57:24]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/21
------------------------------------------------------------------------
[Program Name] Engine
------------------------------------------------------------------------
[Version] 1.11:09
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45551D
[File Information]
File Name D0A45551D.fwu
File Type Module for Service
Size 3.94 MB ( 4129268 byte )
[File Information]
File Name D0A45551D.rfu
File Type Module for Remote Upgrade
Size 3.95 MB ( 4137216 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/11
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45551D_Engine_readme.txt[2020/06/17 14:57:41]
========================================================================
[Modifications made:]
Rank C

Other changes:
- SC542-01 and SC552-01 (type A) are removed. SC546-00 and SC556-00 (type D)
are added for detecting the low voltage.
This firmware is dependent on the following firmware modules, update them to
the required version:
- System/Copy v1.07 (D0A45540D) or later
- Engine v1.11:09 (D0A45551D) or later

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.10:09
Rank C

Symptom corrected:
- When feeding paper from an optional paper feed unit, a jam (J017) might occur.
- When a non-paper feed jam occurred during a duplex printing job to a small size
paper shorter than 215.9mm, the machine may not stop and the Jam21 may occur
after two minutes.
- When a non-paper feed jam occurred under the following conditions, the machine
may not stop and the Jam21 may occur after two minutes.
- Paper feed direction: Short edge feed
- Paper tray: Option tray
- Printing mode: More than 3 sheets duplex printing job
- The estimated toner near-end status might come earlier than expected.

Other changes:
- Some SP numbers are added based on field request.
This firmware is dependent on the following firmware modules, update them to
the required version:
- System/Copy v1.09 (D0A45540F) or later
- Engine v1.10:09 (D0A45551C) or later
- The following SP modes are added: SP1-957-001 to 002
This firmware is dependent on the following firmware modules, update them to
the required version:
- System/Copy v1.09 (D0A45540F) or later
- Engine v1.10:09 (D0A45551C) or later

----------------------------------------
Version 1.09:09
Rank C

Symptom corrected:
- Due to the change of the Home Position Sensor and SPDF Feed
Sensor, SC121-00 or J004 might occur caused by the new sensor's
antistatic performance.
- If the machine placed in a high voltage environment, it might
misdetect unusual conditions 5 times consecutively and give SC541

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45551D_Engine_readme.txt[2020/06/17 14:57:41]
error.
- An alert stating that the waste toner level is almost full might
appear earlier than expected.
- SC569-01may occur if the main switch is turned on when the new
fusing unit is installed.

Other changes:
- When the SP3-920-002 is set to "0" and SP5-930-001 is set to "1",
if the temperature inside the machine is or less than 36 degrees
Celsius, a control to improve the toner yield starts working.

----------------------------------------
Version 1.08:09
Rank C

Symptom corrected:
- The Engine firmware cannot be updated at the same time as the Bank firmware.
- Opening and closing the cover after doing the output check for the
feed/fusing motor (SP5-804-013 to 22) might cause SC508 to occur.
- The PM Counter might be incorrect.

----------------------------------------
Version 1.07:09

Rank C

Symptom corrected:
- If a paper misfeed jam occurs during duplex printing, after
recovering from the jam, the misfed page is printed twice and
another page is missing.

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45551D_Engine_readme.txt[2020/06/17 14:57:41]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/11
------------------------------------------------------------------------
[Program Name] Java VM v12 std for eDC
------------------------------------------------------------------------
[Version] 12.69.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45553C_edc
[File Information]
File Name D0A45553C_edc.ifu
File Type Module for Service
Size 59.67 MB ( 62564072 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2020/01
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

file:///C/...ちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45553C_edc_Java_VM_v12_std_for_eDC_readme.txt[2020/06/17 14:57:55]
Symptom corrected:
- When the amount of file descriptor, used on JavaVM, is 256 or more,
a certain print command from the SDK application might cause an error.
- Application installation using Remote Install Manager through IEEE
802.11 Interface Unit might be failed.
- Implemented vulnerability countermeasures against the ROBOT attack
and the use of Static Key Ciphers.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 12.65.01
Rank C

Symptom corrected:
- Errors might be occured by using the Globalscan.
- When JavaVM launched "NullPointerException" error message may be
displayed, and JavaVM startup may fail.
- SDK application might not startup if the Stream Line NX settings changed.

----------------------------------------
Version 12.63.00
Rank D

1st Mass production

file:///C/...ちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45553C_edc_Java_VM_v12_std_for_eDC_readme.txt[2020/06/17 14:57:55]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/11
------------------------------------------------------------------------
[Program Name] Java VM v12 std UpdateTool
------------------------------------------------------------------------
[Version] 12.69.00
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45553C_upd
[File Information]
File Name D0A45553C_upd.exe
File Type Module for Service
Size 59.33 MB ( 62208209 byte )
Check Sum -8Bit Sum: 6766
-16Bit Sum(Little Endian): 9F84
-16Bit Sum(Big Endian): 2DE2
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2020/01
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================

file:///C/...ゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45553C_upd_Java_VM_v12_std_UpdateToo_readme.txt[2020/06/17 14:58:14]
[Modifications made:]
Rank C

Symptom corrected:
- When the amount of file descriptor, used on JavaVM, is 256 or more,
a certain print command from the SDK application might cause an error.
- Application installation using Remote Install Manager through IEEE
802.11 Interface Unit might be failed.
- Implemented vulnerability countermeasures against the ROBOT attack
and the use of Static Key Ciphers.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 12.65.01
Rank C

Symptom corrected:
- Errors might be occured by using the Globalscan.
- When JavaVM launched "NullPointerException" error message may be
displayed, and JavaVM startup may fail.
- SDK application might not startup if the Stream Line NX settings changed.

----------------------------------------
Version 12.63.00
Rank D

1st Mass production

file:///C/...ゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45553C_upd_Java_VM_v12_std_UpdateToo_readme.txt[2020/06/17 14:58:14]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/20
------------------------------------------------------------------------
[Program Name] Web Support
------------------------------------------------------------------------
[Version] 1.03
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45568F
[File Information]
File Name D0A45568F.fwu
File Type Module for Service
Size 7.40 MB ( 7764588 byte )
[File Information]
File Name D0A45568F.rfu
File Type Module for Remote Upgrade
Size 7.41 MB ( 7770368 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/01
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45568F_Web_Support_readme.txt[2020/06/17 14:58:27]
========================================================================
[Modifications made:]
Rank C

Other changes:
- Implementation of countermeasures for the three vulnerabilities listed below.
(The following firmware updates are required for the countermeasures to take effect:
System/Copy v1.09, Printer v1.04, Web Support v1.03, Web Uapl v1.01.)
1. A URL for Remote Panel Operation might leak, and there is a risk that an
unauthenticated user could operate the device remotely.
2. There is an XSS vulnerability.
3. The Web Image Monitor sets session cookies without the HttpOnly attribute,
and there is a risk the cookies might leak data.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.02
Rank C

Other changes:
- The log storage function via @Remote has been removed.
This firmware is dependent on the following firmware modules.
Please be sure to update all of them:
- System/Copy V1.06 (D0A45540C) or later
- Web Support V1.02 (D0A45568E) or later

----------------------------------------
Version 1.01
Rank C

Other changes:
- The following values can be set with solution software that uses SOAP I/F.
- "SNMPv3 Setting"
- SNMPv3 Trap Communication
- Encryption Algorithm
- Permit SNMPv3 Communication
- "Program/Change Administrator"
- Encryption Password
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.

----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45568F_Web_Support_readme.txt[2020/06/17 14:58:27]
file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45568F_Web_Support_readme.txt[2020/06/17 14:58:27]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/20
------------------------------------------------------------------------
[Program Name] Web Uapl
------------------------------------------------------------------------
[Version] 1.01
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45569D
[File Information]
File Name D0A45569D.fwu
File Type Module for Service
Size 1.96 MB ( 2052900 byte )
[File Information]
File Name D0A45569D.rfu
File Type Module for Remote Upgrade
Size 1.97 MB ( 2060544 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/01
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...ビスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45569D_Web_Uapl_readme.txt[2020/06/17 14:58:56]
========================================================================
[Modifications made:]
Rank C

Other changes:
- Implementation of countermeasures for the three vulnerabilities listed below.
(The following firmware updates are required for the countermeasures to take effect:
System/Copy v1.09, Printer v1.04, Web Support v1.03, Web Uapl v1.01.)
1. A URL for Remote Panel Operation might leak, and there is a risk that an
unauthenticated user could operate the device remotely.
2. There is an XSS vulnerability.
3. The Web Image Monitor sets session cookies without the HttpOnly attribute,
and there is a risk the cookies might leak data.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/...ビスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45569D_Web_Uapl_readme.txt[2020/06/17 14:58:56]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/20
------------------------------------------------------------------------
[Program Name] Printer
------------------------------------------------------------------------
[Version] 1.04
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45574G
[File Information]
File Name D0A45574G.fwu
File Type Module for Service
Size 4.87 MB ( 5105560 byte )
[File Information]
File Name D0A45574G.rfu
File Type Module for Remote Upgrade
Size 4.88 MB ( 5112064 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/04
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45574G_Printer_readme.txt[2020/06/17 14:59:10]
========================================================================
[Modifications made:]
Rank C

Other changes:
- Implementation of countermeasures for the three vulnerabilities listed below.
(The following firmware updates are required for the countermeasures to take effect:
System/Copy v1.09, Printer v1.04, Web Support v1.03, Web Uapl v1.01.)
1. A URL for Remote Panel Operation might leak, and there is a risk that an
unauthenticated user could operate the device remotely.
2. There is an XSS vulnerability.
3. The Web Image Monitor sets session cookies without the HttpOnly attribute,
and there is a risk the cookies might leak data.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.03
Rank C

Symptom corrected:
- If both Device Manager NX and Enhanced Locked Print NX v2 are
installed, printing a job via Enhanced Locked Print NX v2 or
logging out might fail.

----------------------------------------
Version 1.02
Rank C

Symptom corrected:
- An IPDS form with a custom size might be missing from the Tray
Form List in the IPDS menu on the WIM.

----------------------------------------
Version 1.01
Rank C

Symptom corrected:
- If many jobs are stored through Enhanced Locked Print NX v2, the
thumbnails of some of the jobs might not be displayed.
- A job might be printed out when trying to store it through
Enhanced Locked Print NX v2.
- After storing a job, the free space remaining on the hard disk
might be less than the lower limit set with the Configuration Tool
of Enhanced Locked Print NX v2.
- The stored document name might be incorrect on the Enhanced Locked
Print NX v2 screen if the job is stored from a computer running on Windows
and "Hide extensions for known file types" in "Folder Options" is enabled.
- If the hard disk becomes full while storing a job through Enhanced
Locked Print NX v2, the storing process might stall.
- If a job with an unknown username is stored through Enhanced Locked
Print NX v2, subsequent jobs might not be stored.

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45574G_Printer_readme.txt[2020/06/17 14:59:10]
Other changes:
- The pre-included version of ELP/CAP is updated to 1.5.100.
- The thumbnail creation method on Enhanced Locked Print NX v2
has been revised.

----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45574G_Printer_readme.txt[2020/06/17 14:59:10]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/21
------------------------------------------------------------------------
[Program Name] IRIPS PDF
------------------------------------------------------------------------
[Version] 1.13
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45581F
[File Information]
File Name D0A45581F.fwu
File Type Module for Service
Size 2.80 MB ( 2940868 byte )
[File Information]
File Name D0A45581F.rfu
File Type Module for Remote Upgrade
Size 2.81 MB ( 2945280 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2019/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...ビスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45581F_IRIPS_PDF_readme.txt[2020/06/17 14:59:24]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- If the font information of a PDF file is stored inside a Stream object,
an invalid font error might occur, and the file might not print correctly.
- SC899 might occur when printing a PDF file containing certain types of Stream
object data that define CIE-based color spaces or special color spaces.
- SC899 might occur or the print job might be canceled when printing a PDF that
contains specific data.
- Particular PDF file cannot be printed if PDF/PS is prohibited.
- An image containing axial shading might not print as expected.
- SC899 might occur when printing a PDF file that contains downloaded fonts.
- When File System Operation is permitted for PDF and PostScript, some
directories that should not be accessed might become accessible.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.12
Rank C

Symptom corrected:
- The minus sign (-) in a PDF file might not be printed via PDF Direct.

----------------------------------------
Version 1.11
Rank C

Symptom corrected:
- When printing a PDF file that contains downloaded fonts, an
invalid font error might occur, and the print job might be canceled.
- A locked print job might not be stored on the machine if it is
printed using PJL commands.
- Images might not appear as expected when printing a PDF file via AirPrint.
- PDF files that are generated by certain applications might not
print via Direct Print.
- When printing a PDF file that contains circled letters or numbers,
the circle itself might be distorted.

----------------------------------------
Version 1.10
Rank D

1st Mass production

file:///C/...ビスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45581F_IRIPS_PDF_readme.txt[2020/06/17 14:59:24]
<<Package>>
package_ALL [CHMF1g_a_pk]
D0A45586 Ver. 1.00

<<Separate>>
System/Copy [CHMF1g_a_system]
D0A45540F Ver. 1.09

Web Support [CHIMMF1a_web]


D0A45568F Ver. 1.03

Web Uapl [CHIMMF1a_webua]


D0A45569D Ver. 1.01

Printer [CHIMF1Gd_prt]
D0A45573G Ver. 1.04

Printer [CHIMF1Ge_prt]
D0A45574G Ver. 1.04

PDF [CHIMF1d_prt_PDF]
D3EM5732C Ver. 1.04

Engine [CHIMF1a_eplot]
D0A45551D Ver. 1.11:09

M2a_System [M2a_System]
D0A41456F Ver. 1.04

M2a_LegacyUI [M2a_LegacyUI]
D0A41411D Ver. 1.02

M2a_RemPnlOpe [M2a_RemPnlOpe]
D1961458C Ver. 1.2

file:///C/...先度低】サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/D0A45586_history.txt[2020/06/17 14:59:40]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/01
------------------------------------------------------------------------
[Program Name] System
------------------------------------------------------------------------
[Version] 1.09
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5560J
[File Information]
File Name M0BQ5560J.fwu
File Type Module for Service
Size 23.78 MB ( 24932752 byte )
[File Information]
File Name M0BQ5560J.rfu
File Type Module for Remote Upgrade
Size 23.79 MB ( 24940800 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/04
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5560J_System_readme.txt[2020/06/18 13:32:19]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- Implementation of countermeasures for the CSRF vulnerability.
- Implementation of countermeasures for the two vulnerabilities listed below.
(The following firmware updates are required for the countermeasures
to take effect: System v1.09, Printer v1.09, Web Support v1.02.)
1. There is an XSS vulnerability.
2. The Web Image Monitor sets session cookies without the HttpOnly attribute,
and there is a risk the cookies might leak data.
- Login screen freezes if attempted to gain authentication with
Enhanced Locked Print NX / FlexRelease Server while operating the control panel.
- When printing multiple jobs while "Enhanced Print Volume Use Limitation"
is enabled, the printing might be slower.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.08
Rank C

Symptom corrected:
- Corrected a problem in the tracking application.

----------------------------------------
Version 1.06
Rank C

Other changes:
- SC542-01 and SC552-01 (type A) are removed. SC546-00 and SC556-00
(type D) are added for detecting the low voltage.
This firmware is dependent on the following firmware modules,
update them to the required version:
- System v1.06 (M0BQ5560G) or later
- Engine v1.09:12 (M0BQ5550F) or later

----------------------------------------
Version 1.05
Rank C

Symptom corrected:
- SC569-01 or 02 may occur if the main switch is turned on when the
new fusing unit is installed.
- If the SC545-00 occurs when the Installation Setting screen is
displayed at startup, it is not possible to enter the SP mode, so
the SC545-00 cannot be canceled.
- Color registration shift occurs.
- When JavaVM isn't installed, the SSL/TLS settings in the Security
menu on the WIM can't be reflected in the SSL communication via
port 51443.
- SC819 may occur if IC card reader is disconnected and connected
during machine power ON.

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5560J_System_readme.txt[2020/06/18 13:32:19]
Other changes:
- When the SP3-920-002 is set to "0" and SP5-930-001 is set to "1",
if the temperature inside the machine is or less than 36 degrees
Celsius, a control to improve the toner yield starts working.
- The following SP modes are added: SP1-921 to 922, SP2-104-010 to 012,
SP6-030-001 to 003
- The following SP mode is added: SP2-201-206
- The default value of the Toner Call Threshold (SP5-507-081) is
increased from 10% to 20% in order to prevent the machine from
having the down time.

----------------------------------------
Version 1.04
Rank C

Symptom corrected:
- Black spots might appear on the display due to low voltage.

----------------------------------------
Version 1.03
Rank C

Symptom corrected:
- Wireless direct connection might fail in Group Owner Mode.

----------------------------------------
Version 1.02
Rank C

Other changes:
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.

----------------------------------------
Version 1.01
Rank D

1st Mass production

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5560J_System_readme.txt[2020/06/18 13:32:19]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/18
------------------------------------------------------------------------
[Program Name] System
------------------------------------------------------------------------
[Version] 1.10
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5560K
[File Information]
File Name M0BQ5560K.fwu
File Type Module for Service
Size 23.78 MB ( 24933756 byte )
[File Information]
File Name M0BQ5560K.rfu
File Type Module for Remote Upgrade
Size 23.79 MB ( 24940800 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/04
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5560K_System_readme.txt[2020/06/18 13:32:30]
========================================================================
[Modifications made:]
Rank C

Supported:
- RICOH USB Device Agent V2 of Device Manager NX Accounting is available
since System V1.10 and Network Support V17.47.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.09
Rank C

Symptom corrected:
- Implementation of countermeasures for the CSRF vulnerability.
- Implementation of countermeasures for the two vulnerabilities listed below.
(The following firmware updates are required for the countermeasures
to take effect: System v1.09, Printer v1.09, Web Support v1.02.)
1. There is an XSS vulnerability.
2. The Web Image Monitor sets session cookies without the HttpOnly attribute,
and there is a risk the cookies might leak data.
- Login screen freezes if attempted to gain authentication with
Enhanced Locked Print NX / FlexRelease Server while operating the control panel.
- When printing multiple jobs while "Enhanced Print Volume Use Limitation"
is enabled, the printing might be slower.

----------------------------------------
Version 1.08
Rank C

Symptom corrected:
- Corrected a problem in the tracking application.

----------------------------------------
Version 1.06
Rank C

Other changes:
- SC542-01 and SC552-01 (type A) are removed. SC546-00 and SC556-00
(type D) are added for detecting the low voltage.
This firmware is dependent on the following firmware modules,
update them to the required version:
- System v1.06 (M0BQ5560G) or later
- Engine v1.09:12 (M0BQ5550F) or later

----------------------------------------
Version 1.05
Rank C

Symptom corrected:
- SC569-01 or 02 may occur if the main switch is turned on when the
new fusing unit is installed.

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5560K_System_readme.txt[2020/06/18 13:32:30]
- If the SC545-00 occurs when the Installation Setting screen is
displayed at startup, it is not possible to enter the SP mode, so
the SC545-00 cannot be canceled.
- Color registration shift occurs.
- When JavaVM isn't installed, the SSL/TLS settings in the Security
menu on the WIM can't be reflected in the SSL communication via
port 51443.
- SC819 may occur if IC card reader is disconnected and connected
during machine power ON.

Other changes:
- When the SP3-920-002 is set to "0" and SP5-930-001 is set to "1",
if the temperature inside the machine is or less than 36 degrees
Celsius, a control to improve the toner yield starts working.
- The following SP modes are added: SP1-921 to 922, SP2-104-010 to 012,
SP6-030-001 to 003
- The following SP mode is added: SP2-201-206
- The default value of the Toner Call Threshold (SP5-507-081) is
increased from 10% to 20% in order to prevent the machine from
having the down time.

----------------------------------------
Version 1.04
Rank C

Symptom corrected:
- Black spots might appear on the display due to low voltage.

----------------------------------------
Version 1.03
Rank C

Symptom corrected:
- Wireless direct connection might fail in Group Owner Mode.

----------------------------------------
Version 1.02
Rank C

Other changes:
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.

----------------------------------------
Version 1.01
Rank D

1st Mass production

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5560K_System_readme.txt[2020/06/18 13:32:30]
file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5560K_System_readme.txt[2020/06/18 13:32:30]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/01
------------------------------------------------------------------------
[Program Name] Web Support
------------------------------------------------------------------------
[Version] 1.02
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5568C
[File Information]
File Name M0BQ5568C.fwu
File Type Module for Service
Size 6.47 MB ( 6786900 byte )
[File Information]
File Name M0BQ5568C.rfu
File Type Module for Remote Upgrade
Size 6.48 MB ( 6791424 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/04
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5568C_Web_Support_readme.txt[2020/06/18 13:32:44]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
Implementation of countermeasures for the two vulnerabilities listed below.
(The following firmware updates are required for the countermeasures
to take effect: System v1.09, Printer v1.09, Web Support v1.02.)
1. There is an XSS vulnerability.
2. The Web Image Monitor sets session cookies without the HttpOnly attribute,
and there is a risk the cookies might leak data.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.01
Rank D

1st Mass production

file:///C/...スマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5568C_Web_Support_readme.txt[2020/06/18 13:32:44]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/18
------------------------------------------------------------------------
[Program Name] Network Support
------------------------------------------------------------------------
[Version] 17.47
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5572F
[File Information]
File Name M0BQ5572F.fwu
File Type Module for Service
Size 11.38 MB ( 11930520 byte )
[File Information]
File Name M0BQ5572F.rfu
File Type Module for Remote Upgrade
Size 11.38 MB ( 11936000 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/04
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...ニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5572F_Network_Support_readme.txt[2020/06/18 13:32:57]
========================================================================
[Modifications made:]
Rank C

Supported:
- RICOH USB Device Agent V2 of Device Manager NX Accounting is available since
System V1.10 and Network Support V17.47.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 17.46
Rank C

Symptom corrected:
- Printer driver is NOT installed automatically when connecting to
PC via USB cable in case that AirPrint is set to active and that
IPP is set to inactive.

----------------------------------------
Version 17.45
Rank C

Symptom corrected:
- A vulnerability (CVE-2019-1559) to a Padding Oracle Attack on CBC
encryption has been fixed. To activate this fix, CBC mode must be
disabled after updating the firmware.
- msh> set cbc down
- msh> logout
- Enter "yes" to save the changes.

----------------------------------------
Version 17.44
Rank C

Symptom corrected:
- The DHCP address renewal request might be discarded when the DHCP
server is configured as a failover cluster.
- When JavaVM isn't installed, the SSL/TLS settings in the Security
menu on the WIM can't be reflected in the SSL communication via port 51443.

----------------------------------------
Version 17.43
Rank D

1st Mass production

file:///C/...ニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5572F_Network_Support_readme.txt[2020/06/18 13:32:57]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/05/01
------------------------------------------------------------------------
[Program Name] Printer
------------------------------------------------------------------------
[Version] 1.09
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5574E
[File Information]
File Name M0BQ5574E.fwu
File Type Module for Service
Size 4.06 MB ( 4254840 byte )
[File Information]
File Name M0BQ5574E.rfu
File Type Module for Remote Upgrade
Size 4.06 MB ( 4260096 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/04
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5574E_Printer_readme.txt[2020/06/18 13:33:11]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
Implementation of countermeasures for the two vulnerabilities listed below.
(The following firmware updates are required for the countermeasures
to take effect: System v1.09, Printer v1.09, Web Support v1.02.)
1. There is an XSS vulnerability.
2. The Web Image Monitor sets session cookies without the HttpOnly attribute,
and there is a risk the cookies might leak data.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.08
Rank C

Symptom corrected:
- A message might be incorrectly displayed stating that the storage
limit for Locked Print has been reached.

----------------------------------------
Version 1.05
Rank C

Symptom corrected:
- If both Device Manager NX and Enhanced Locked Print NX v2 are installed,
printing a job via Enhanced Locked Print NX v2 or logging out might fail.

Other changes:
- Device information can be checked via a USB connection.

----------------------------------------
Version 1.04
Rank C

Symptom corrected:
- An IPDS form with a custom media type might be missing from the
Tray Form List for Bypass Tray in the IPDS menu on the WIM.
- An IPDS form with a custom size might be missing from the Tray
Form List in the IPDS menu on the WIM.

----------------------------------------
Version 1.00
Rank D

1st Mass production

file:///C/...サービスマニュアルがっちゃんこ(月中にやる)/■ふぁーむうぇあ/04月ふぁーむうぇあ/M0BQ5574E_Printer_readme.txt[2020/06/18 13:33:11]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/06/12
------------------------------------------------------------------------
[Program Name] Engine
------------------------------------------------------------------------
[Version] 1.10:12
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5550G
[File Information]
File Name M0BQ5550G.fwu
File Type Module for Service
Size 0.94 MB ( 983540 byte )
[File Information]
File Name M0BQ5550G.rfu
File Type Module for Remote Upgrade
Size 0.95 MB ( 991488 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/07
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///10.62.17.218/data/bulletin.dat/Firmware_release_note/202006/M0BQ5550G_Engine_readme.txt[2020/07/08 16:38:00]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- The toner supply control parameters have been changed to prevent vertical black
bands from being printed after replacing the toner cartridge.
- After operating the exit/reverse motor in output check mode, etc, the motor might
remain on even when the power is turned off, when switching to energy saving mode,
or when updating the firmware.
- Jam Code #4 (Tray 2: No paper feeding) might occur on an optional bank when feeding
the first sheet from Tray 1 or the bypass tray and the second and third sheets from
the optional bank.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.09:12
Rank C

Other changes:
- SC542-01 and SC552-01 (type A) are removed. SC546-00 and SC556-00
(type D) are added for detecting the low voltage.
This firmware is dependent on the following firmware modules,
update them to the required version:
- System v1.06 (M0BQ5560G) or later
- Engine v1.09:12 (M0BQ5550F) or later

----------------------------------------
Version 1.08:12
Rank C

Symptom corrected:
- When feeding paper from an optional paper feed unit, a jam (J017)
might occur.
- If the machine placed in a high voltage environment, it might
misdetect unusual conditions 5 times consecutively and give SC541
error.
- An alert stating that the waste toner level is almost full might
appear earlier than expected.
- SC569-01may occur if the main switch is turned on when the new
fusing unit is installed.
- When a non-paper feed jam occurred during a duplex printing job to
a small size paper shorter than 215.9mm, the machine may not stop
and the Jam21 may occur after two minutes.
- When a non-paper feed jam occurred under the following conditions,
the machine may not stop and the Jam21 may occur after two minutes.
- Paper feed direction: Short edge feed
- Paper tray: Option tray
- Printing mode: More than 3 sheets duplex printing job
- The estimated toner near-end status might come earlier than
expected.
- SC995-03 may occur when the main switch is turned on.

file:///10.62.17.218/data/bulletin.dat/Firmware_release_note/202006/M0BQ5550G_Engine_readme.txt[2020/07/08 16:38:00]
Other changes:
- When the SP3-920-002 is set to "0" and SP5-930-001 is set to "1",
if the temperature inside the machine is or less than 36 degrees
Celsius, a control to improve the toner yield starts working.

----------------------------------------
Version 1.06:12
Rank C

Symptom corrected:
- Opening and closing the cover after doing the output check for the
feed/fusing motor (SP5-804-013 to 22) might cause SC508 to occur.
- The PM Counter might be incorrect.

----------------------------------------
Version 1.05:12
Rank C

Symptom corrected:
- If the Inrush Control is enabled in SP1-135-001, a circuit breaker
or UPS might cut off the power when the machine is turned on or
wakes up from sleep mode due to the inrush current.

----------------------------------------
Version 1.04:12
Rank D

1st Mass production

file:///10.62.17.218/data/bulletin.dat/Firmware_release_note/202006/M0BQ5550G_Engine_readme.txt[2020/07/08 16:38:00]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/07/06
------------------------------------------------------------------------
[Program Name] Engine
------------------------------------------------------------------------
[Version] 1.12:09
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D0A45551E
[File Information]
File Name D0A45551E.fwu
File Type Module for Service
Size 3.94 MB ( 4129268 byte )
[File Information]
File Name D0A45551E.rfu
File Type Module for Remote Upgrade
Size 3.95 MB ( 4137216 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///10.62.17.218/data/bulletin.dat/Firmware_release_note/202007/D0A45551E_Engine_readme.txt[2020/08/26 13:42:46]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- The toner supply control parameters have been changed
to prevent vertical black bands from being printed
after replacing the toner cartridge.
- After operating the exit/reverse motor in output check mode, etc,
the motor might remain on even when the power is turned off,
when switching to energy saving mode, or when updating the firmware.
- Jam Code #4 (Tray 2: No paper feeding) might occur on an optional bank
when feeding the first sheet from Tray 1 or the bypass tray and the second
and third sheets from the optional bank.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.11:09
Rank C

Other changes:
- SC542-01 and SC552-01 (type A) are removed. SC546-00 and SC556-00 (type D)
are added for detecting the low voltage.
This firmware is dependent on the following firmware modules, update them to
the required version:
- System/Copy v1.07 (D0A45540D) or later
- Engine v1.11:09 (D0A45551D) or later

----------------------------------------
Version 1.10:09
Rank C

Symptom corrected:
- When feeding paper from an optional paper feed unit, a jam (J017) might occur.
- When a non-paper feed jam occurred during a duplex printing job to a small size
paper shorter than 215.9mm, the machine may not stop and the Jam21 may occur
after two minutes.
- When a non-paper feed jam occurred under the following conditions, the machine
may not stop and the Jam21 may occur after two minutes.
- Paper feed direction: Short edge feed
- Paper tray: Option tray
- Printing mode: More than 3 sheets duplex printing job
- The estimated toner near-end status might come earlier than expected.

Other changes:
- Some SP numbers are added based on field request.
This firmware is dependent on the following firmware modules, update them to
the required version:
- System/Copy v1.09 (D0A45540F) or later
- Engine v1.10:09 (D0A45551C) or later
- The following SP modes are added: SP1-957-001 to 002
This firmware is dependent on the following firmware modules, update them to
the required version:

file:///10.62.17.218/data/bulletin.dat/Firmware_release_note/202007/D0A45551E_Engine_readme.txt[2020/08/26 13:42:46]
- System/Copy v1.09 (D0A45540F) or later
- Engine v1.10:09 (D0A45551C) or later

----------------------------------------
Version 1.09:09
Rank C

Symptom corrected:
- Due to the change of the Home Position Sensor and SPDF Feed
Sensor, SC121-00 or J004 might occur caused by the new sensor's
antistatic performance.
- If the machine placed in a high voltage environment, it might
misdetect unusual conditions 5 times consecutively and give SC541
error.
- An alert stating that the waste toner level is almost full might
appear earlier than expected.
- SC569-01may occur if the main switch is turned on when the new
fusing unit is installed.

Other changes:
- When the SP3-920-002 is set to "0" and SP5-930-001 is set to "1",
if the temperature inside the machine is or less than 36 degrees
Celsius, a control to improve the toner yield starts working.

----------------------------------------
Version 1.08:09
Rank C

Symptom corrected:
- The Engine firmware cannot be updated at the same time as the Bank firmware.
- Opening and closing the cover after doing the output check for the
feed/fusing motor (SP5-804-013 to 22) might cause SC508 to occur.
- The PM Counter might be incorrect.

----------------------------------------
Version 1.07:09

Rank C

Symptom corrected:
- If a paper misfeed jam occurs during duplex printing, after
recovering from the jam, the misfed page is printed twice and
another page is missing.

file:///10.62.17.218/data/bulletin.dat/Firmware_release_note/202007/D0A45551E_Engine_readme.txt[2020/08/26 13:42:46]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/08/03
------------------------------------------------------------------------
[Program Name] System
------------------------------------------------------------------------
[Version] 1.11
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5560L
[File Information]
File Name M0BQ5560L.fwu
File Type Module for Service
Size 23.78 MB ( 24933676 byte )
[File Information]
File Name M0BQ5560L.rfu
File Type Module for Remote Upgrade
Size 23.79 MB ( 24940800 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/07
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/.../白井さん引き継ぎ/サービスマニュアルとファームリリースノート/作業/20200809/FRN/M0BQ5560L_System_readme.txt[2020/10/12 9:52:43]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- SC672 may occur after booting
- The parameters for toner supply control have been changed to prevent
random vertical black bands appearing after replacing the toner cartridge.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.10
Rank C

Supported:
- RICOH USB Device Agent V2 of Device Manager NX Accounting is available
since System V1.10 and Network Support V17.47.

----------------------------------------
Version 1.09
Rank C

Symptom corrected:
- Implementation of countermeasures for the CSRF vulnerability.
- Implementation of countermeasures for the two vulnerabilities listed below.
(The following firmware updates are required for the countermeasures
to take effect: System v1.09, Printer v1.09, Web Support v1.02.)
1. There is an XSS vulnerability.
2. The Web Image Monitor sets session cookies without the HttpOnly attribute,
and there is a risk the cookies might leak data.
- Login screen freezes if attempted to gain authentication with
Enhanced Locked Print NX / FlexRelease Server while operating the control panel.
- When printing multiple jobs while "Enhanced Print Volume Use Limitation"
is enabled, the printing might be slower.

----------------------------------------
Version 1.08
Rank C

Symptom corrected:
- Corrected a problem in the tracking application.

----------------------------------------
Version 1.06
Rank C

Other changes:
- SC542-01 and SC552-01 (type A) are removed. SC546-00 and SC556-00
(type D) are added for detecting the low voltage.
This firmware is dependent on the following firmware modules,
update them to the required version:
- System v1.06 (M0BQ5560G) or later
- Engine v1.09:12 (M0BQ5550F) or later

file:///C/.../白井さん引き継ぎ/サービスマニュアルとファームリリースノート/作業/20200809/FRN/M0BQ5560L_System_readme.txt[2020/10/12 9:52:43]
----------------------------------------
Version 1.05
Rank C

Symptom corrected:
- SC569-01 or 02 may occur if the main switch is turned on when the
new fusing unit is installed.
- If the SC545-00 occurs when the Installation Setting screen is
displayed at startup, it is not possible to enter the SP mode, so
the SC545-00 cannot be canceled.
- Color registration shift occurs.
- When JavaVM isn't installed, the SSL/TLS settings in the Security
menu on the WIM can't be reflected in the SSL communication via
port 51443.
- SC819 may occur if IC card reader is disconnected and connected
during machine power ON.

Other changes:
- When the SP3-920-002 is set to "0" and SP5-930-001 is set to "1",
if the temperature inside the machine is or less than 36 degrees
Celsius, a control to improve the toner yield starts working.
- The following SP modes are added: SP1-921 to 922, SP2-104-010 to 012,
SP6-030-001 to 003
- The following SP mode is added: SP2-201-206
- The default value of the Toner Call Threshold (SP5-507-081) is
increased from 10% to 20% in order to prevent the machine from
having the down time.

----------------------------------------
Version 1.04
Rank C

Symptom corrected:
- Black spots might appear on the display due to low voltage.

----------------------------------------
Version 1.03
Rank C

Symptom corrected:
- Wireless direct connection might fail in Group Owner Mode.

----------------------------------------
Version 1.02
Rank C

Other changes:
- When condensation is detected inside the machine, instructions are
displayed instead of an SC error message.

----------------------------------------
Version 1.01
Rank D

file:///C/.../白井さん引き継ぎ/サービスマニュアルとファームリリースノート/作業/20200809/FRN/M0BQ5560L_System_readme.txt[2020/10/12 9:52:43]
1st Mass production

file:///C/.../白井さん引き継ぎ/サービスマニュアルとファームリリースノート/作業/20200809/FRN/M0BQ5560L_System_readme.txt[2020/10/12 9:52:43]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/07/29
------------------------------------------------------------------------
[Program Name] Network Support
------------------------------------------------------------------------
[Version] 17.48
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M0BQ5572G
[File Information]
File Name M0BQ5572G.fwu
File Type Module for Service
Size 11.38 MB ( 11930484 byte )
[File Information]
File Name M0BQ5572G.rfu
File Type Module for Remote Upgrade
Size 11.38 MB ( 11936000 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/07
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...引き継ぎ/サービスマニュアルとファームリリースノート/作業/20200809/FRN/M0BQ5572G_Network_Support_readme.txt[2020/10/12 9:53:35]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- A device busy error can't be returned to the client during IPP printing
from Mac OS if a device error occurs, such as an open cover, and
this results in a timeout instead of retrying the operation in the client.
- SC899 might occur while loading the device certificate if it was
imported in PKCS12 format.
- Updating the pacakge firmware via the Web Image Monitor takes
about 50 minutes.
(The following firmware updates are required for the countermeasures to
take effect: Web Support v1.03, Network Support v17.48, Printer v1.11.)
- Mopria printing from Windows will fail if Windows 10 is updated to
20H1 or later.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 17.47
Rank C

Supported:
- RICOH USB Device Agent V2 of Device Manager NX Accounting is available since
System V1.10 and Network Support V17.47.

----------------------------------------
Version 17.46
Rank C

Symptom corrected:
- Printer driver is NOT installed automatically when connecting to
PC via USB cable in case that AirPrint is set to active and that
IPP is set to inactive.

----------------------------------------
Version 17.45
Rank C

Symptom corrected:
- It is now possible to disable CBC mode to address the TLS CBC
Padding Oracle vulnerability. To activate this fix, CBC mode must
be disabled after updating the firmware by entering the following
commands:
- msh> set cbc down
- msh> logout
- Enter "yes" to save the changes.

----------------------------------------
Version 17.44
Rank C

Symptom corrected:
- The DHCP address renewal request might be discarded when the DHCP

file:///C/...引き継ぎ/サービスマニュアルとファームリリースノート/作業/20200809/FRN/M0BQ5572G_Network_Support_readme.txt[2020/10/12 9:53:35]
server is configured as a failover cluster.
- When JavaVM isn't installed, the SSL/TLS settings in the Security
menu on the WIM can't be reflected in the SSL communication via port 51443.

----------------------------------------
Version 17.43
Rank D

1st Mass production

file:///C/...引き継ぎ/サービスマニュアルとファームリリースノート/作業/20200809/FRN/M0BQ5572G_Network_Support_readme.txt[2020/10/12 9:53:35]
========================================================================
*** Basic Information ***
========================================================================
[Create date] 2020/08/03
------------------------------------------------------------------------
[Program Name] PDF
------------------------------------------------------------------------
[Version] 1.03
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] M5435733C
[File Information]
File Name M5435733C.fwu
File Type Module for Service
Size 4.30 MB ( 4511452 byte )
[File Information]
File Name M5435733C.rfu
File Type Module for Remote Upgrade
Size 4.31 MB ( 4518144 byte )
[Availability of RFU] Yes
------------------------------------------------------------------------
[Production reflection] 2020/07
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

file:///C/...ダ/白井さん引き継ぎ/サービスマニュアルとファームリリースノート/作業/20200809/FRN/M5435733C_PDF_readme.txt[2020/10/12 9:54:38]
========================================================================
[Modifications made:]
Rank C

Symptom corrected:
- When printing PS data that includes a certain pattern of dash lines,
the print job might hang.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.02
Rank C

Symptom corrected:
- When printing a PDF file that contains transparent images via PDF Direct,
the output might be distorted.
- SC899 might occur when direct printing a PDF file that contains
JBIG2-compressed data.
- SC899 might occur when printing a webpage on Linux.
- Printing a PDF with a transparent image and a shaded image might
take a long time due to memory release processing, and the shaded
image might not be printed as expected.

----------------------------------------
Version 1.01
Rank D

1st Mass production

file:///C/...ダ/白井さん引き継ぎ/サービスマニュアルとファームリリースノート/作業/20200809/FRN/M5435733C_PDF_readme.txt[2020/10/12 9:54:38]

You might also like