The document summarizes displacement results from analyzing a structure under different load cases. It shows the maximum and minimum displacements in the x, y, and z directions as well as the resultant displacement. The maximum vertical deflection was 6 mm which is less than the allowable 10.4 mm. The maximum horizontal deflection was 4 mm which is less than the allowable 20 mm. It also shows the maximum plate stress was 11.761 MPa which is less than the allowable 160 MPa for the material (SS 400).
The document summarizes displacement results from analyzing a structure under different load cases. It shows the maximum and minimum displacements in the x, y, and z directions as well as the resultant displacement. The maximum vertical deflection was 6 mm which is less than the allowable 10.4 mm. The maximum horizontal deflection was 4 mm which is less than the allowable 20 mm. It also shows the maximum plate stress was 11.761 MPa which is less than the allowable 160 MPa for the material (SS 400).
The document summarizes displacement results from analyzing a structure under different load cases. It shows the maximum and minimum displacements in the x, y, and z directions as well as the resultant displacement. The maximum vertical deflection was 6 mm which is less than the allowable 10.4 mm. The maximum horizontal deflection was 4 mm which is less than the allowable 20 mm. It also shows the maximum plate stress was 11.761 MPa which is less than the allowable 160 MPa for the material (SS 400).
Reid, Henry - The Science and Art of The Manufacture of Portland Cement - With Observations On Some of Its Constructive applications-ICE Publishing (2011) PDF