Professional Documents
Culture Documents
Input Echo, Tubesheet Number 1, Description: Fixed TS Design Shell Data
Input Echo, Tubesheet Number 1, Description: Fixed TS Design Shell Data
Shell Data:
Shell Maximum Design Pressure Psd,max 0.65 MPa
Shell Maximum Operating Pressure Psox,max 0.32 MPa
Shell Minimum Operating Pressure Psox,min 0.00 MPa
Shell Thickness ts 7.1100 mm.
Shell Corrosion Allowance cas 1.5000 mm.
Inside Diameter of Shell Ds 154.000 mm.
Shell Temperature for Internal Pressure Ts 80.00 C
Shell Material SA-106 B
Tube Data:
Number of Tube Holes Nt 32
Tube Wall Thickness et 1.6500 mm.
Tube Outside Diameter D 15.8750 mm.
Total Straight Tube Length Lt 915.00 mm.
Straight Tube Length (bet. inner tubsht faces) L 865.00 mm.
Design Temperature of the Tubes 90.00 C
Tube Material SB-111 O61
Tube Material UNS Number C44300
Is this a Welded Tube No
Tube Material Specification used Smls. cond. tube
Tube Allowable Stress at Temperature 68.95 MPa
Tube Allowable Stress At Ambient 68.95 MPa
Tube Yield Stress At design Temperature Syt 103.43 MPa
Tube Pitch (Center to Center Spacing) P 19.0500 mm.
Tube Layout Pattern Triangular
Tubesheet Data:
Bolting Information:
Diameter of Bolt Circle C 220.000 mm.
Nominal Bolt Diameter dB 12.7000 mm.
Type of Thread Series UNC Thread Series
Number of Bolts n 8
Bolt Material SA-193 B16
Bolt Material UNS Number K14072
Bolt Allowable Stress At Temperature Sb 172.38 MPa
Bolt Allowable Stress At Ambient Sa 172.38 MPa
Weld between Flange and Shell/Channel 0.0000 mm.
Note:
The Elasticity and Alpha values are taken from Tables in ASME II D.
Please insure these properties are consistent with the
type of Material for the tubes, shell, channel etc.
-----------------------------------------------------------------
Detailed Results for load Case D3 un-corr. (Psd,max + Ptd,max)
-----------------------------------------------------------------
Note: Tubesheet Bending Stress is probably low, use the following req. thk:
Tubesheet thickness (Incl. Corr.)= 3.8100 mm.
Tubesheet Bending Stress = 114.8743 MPa
Tubesheet Shear Stress is probably low, use the following req. thk:
Tubesheet thickness (Incl. Corr.)= 3.8100 mm.
Tubesheet Shear Stress = 1.8979 MPa
First Extreme Tube Axial Stress from among all the tubes [Sigmat1]:
= ( ( Ps * xs - Pt * xt ) - Pe * Ftmin ) / ( Xt - Xs )
= ( ( 0.65 * 0.6210 - 0.70 * 0.7622 ) - (.033 ) * 0.618 ) /
( 0.7622 - 0.6210 ) )
= -1.0646 MPa
Second Extreme value of Tube Axial Stress from among all the tubes [Sigmat2]:
= ( ( Ps * xs - Pt * xt ) - Pe * Ftmax ) / ( Xt - Xs )
= ( ( 0.65 * 0.6210 - 0.70 * 0.7622 ) - (.033 ) * 1.339 ) /
( 0.7622 - 0.6210 ) )
= -1.2333 MPa
-----------------------------------------------------------------
Detailed Results for load Case O3 corr. (Psox,max + Ptox,max + Th)
-----------------------------------------------------------------
Tr = T' = -17.7778 C
Note: Tubesheet Bending Stress is probably low, use the following req. thk:
Tubesheet thickness (Incl. Corr.)= 8.3100 mm.
Tubesheet Bending Stress = 15.6801 MPa
Tubesheet Shear Stress is probably low, use the following req. thk:
Tubesheet thickness (Incl. Corr.)= 8.3100 mm.
Tubesheet Shear Stress = 2.6571 MPa
First Extreme Tube Axial Stress from among all the tubes [Sigmat1]:
= ( ( Ps * xs - Pt * xt ) - Pe * Ftmin ) / ( Xt - Xs )
= ( ( 0.32 * 0.6210 - 0.25 * 0.7622 ) - (-0.046 ) * 0.374 ) /
( 0.7622 - 0.6210 ) )
= 0.1805 MPa
Second Extreme value of Tube Axial Stress from among all the tubes [Sigmat2]:
= ( ( Ps * xs - Pt * xt ) - Pe * Ftmax ) / ( Xt - Xs )
= ( ( 0.32 * 0.6210 - 0.25 * 0.7622 ) - (-0.046 ) * 1.565 ) /
( 0.7622 - 0.6210 ) )
= 0.5709 MPa
[(+-)Th]:
With or Without Thermal Expansion, Tt,mx & Ts,mx
[c]:
With or Without Corrosion Allowance
[D1, D2, D3]:
Design Load Cases using the Maximum and Minimum Design Pressures
[D4]:
Design Load Case using the Minimum (Vacuum) Pressures (if specified)