Professional Documents
Culture Documents
29UM69G
29UM69G
LED MONITOR
SERVICE MANUAL
CHASSIS : LM71E
MODEL : 29UM69G
CAUTION
BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
CONTENTS .............................................................................................. 2
SPECIFICATION ....................................................................................... 4
DISASSEMBLY ...................................................................................... 18
Copyright © LG Electronics. Inc. All rights reserved. -2- LGE Internal Use Only
Only for training and service purposes
SAFETY PRECAUTIONS
Copyright © LG Electronics. Inc. All rights reserved. -3- LGE Internal Use Only
Only for training and service purposes
SPECIFICATION
1) 29UM69G
No Item Content Remark
1 Customer BRAND
2 User Model Name 29UM69G
3 Sale region World Wide
4 Feature 29” Wide Flat LCD MONITOR(WFHD)
5 Chassis Name LM71E
P/No Specification
Copyright © LG Electronics. Inc. All rights reserved. -4- LGE Internal Use Only
Only for training and service purposes
2. Signal Timing (Resolution)
2.1. Signal (Video & Sync)
V ID E O A
E
D B
SYNC
C
Copyright © LG Electronics. Inc. All rights reserved. -5- LGE Internal Use Only
Only for training and service purposes
2.1.3 HDMI/DP/USB-C_Normal Video input
Factory support Horizontal Vertical
mode frequency frequency
(Preset Mode) (KHz) (Hz)
1 480P 31.5 60
2 576P 31.25 50
3 720P 37.5 50
4 720P 45 60
5 1080P 56.25 50
6 1080P 67.5 60
Copyright © LG Electronics. Inc. All rights reserved. -6- LGE Internal Use Only
Only for training and service purposes
ADJUSTMENT INSTRUCTION
1. Application
1.1 This document is applied to LM71C chassis 34” LCD Monitor (cDMS) which is manufactured in Monitor Factory or is
produced on the basis of this data.
1.2 Manufacturing Type : Set
2. Designation
2.1 The adjustment is according to the order which is designated and which must be followed, according to the plan which can be
changed only on agreeing.
2.2. Power Adjustment: Free Voltage
2.3. Magnetic Field Condition: Nil.
2.4. Input signal Unit: Product Specification Standard
2.5. Reserve after operation: Above 5 Minutes (Heat Run)
Temperature : at 25℃±5°C / Relative humidity : 65 ±10% / Input voltage : 100 ~ 240V, 50/60Hz
2.6. Adjustment equipments: Color Analyzer (CA-210 or CA-110, UA-10), DDC Adjustment Jig equipment,
Copyright © LG Electronics. Inc. All rights reserved. -7- LGE Internal Use Only
Only for training and service purposes
4.3 Set Automatic Standby time
-. Set Automatic Standby time by adjustment jig equipment: Europe : 4H, Others: OFF
Command set : F7 00 01 ( for Europe – set 4h)
F7 00 00 (for others – set 0ff)
-. Check the Automatic Standby time setting value by adjustment jig equipment.
Please check the value of 0xA6 0xEE address
Value : 0x00 - OFF
0x04 - Set 4H
Copyright © LG Electronics. Inc. All rights reserved. - 8 - LGE Internal Use Only
Only for training and service purposes
4.5 DPM Operation check
■Measurement Condition: 100~240V@ 50/60Hz
1) Set Input to DisplayPort, HDMI1
2) Turn off the source device.
3) Check DPM operation refer to the below table.
5. Shipping condition
No. Item Content& Outgoing Condition 비고
Outgoing
2 SOURCE HDMI1
Condition
Power S/W OFF
Brightness 100
Contrast 70
Volume 30
Input HDMI1 *Input Save ad last condition
Ratio Full Wide
Auto input switch On
Picture Mode Custom
Black Stabilizer 50
Freesync Off Inactive
OSD 1ms Motion Blur
Menu Off Inactive
Reduction
Oper
Cross Hair Off
ating.
Time Super Resolution+ Off
Sharpness 50
DFC Off
Response Time Normal
Gamma Mode 2
Color Temp Custom (Manual:6500K)
Red 50
Green 50
Blue 50
Copyright © LG Electronics. Inc. All rights reserved. -9- LGE Internal Use Only
Only for training and service purposes
Hue : 50
Six Color
Saturation : 50
Language Depend on the sale region
Super Energy Saving Low
Power LED Off
Automatic Standby Europe : 4H, Others: OFF
DisplayPort 1.2 Enable
OSD Lock Off
Operating Time Within 2Hours
Copyright © LG Electronics. Inc. All rights reserved. - 10 - LGE Internal Use Only
Only for training and service purposes
6. Signal composition for adjustment
R GAIN 16 00 00-64
B GAIN 1A 00 00-64
Copyright © LG Electronics. Inc. All rights reserved. - 11- LGE Internal Use Only
Only for training and service purposes
Adjustment contents CMD(hex) ADR VAL(hex) Explanation
00:English,
01: German
02: French
03: Spanish
04: Italian
05: Swedish,
0x00 ~ 0x11 06:Finnish
07: Portuguese
Select Language 68 00 * 0x10 is not 08: Brazil
available 09: Polish
0A: Russian
0B: Greek
0C: Ukrainian
0D: Chinese
0E:Japanese
0F: Korean
11 : Traditional Chinese
EDID SN UPDATE 0x77 0 0x00 Update all input’s serial data
0x00:OFF
APD command 0xF7 00 0x00~0x01
0x01: set APD time to 4h
0x00 0x00 : OFF
VCom Internal Pattern ON A7 00
0x03 0x03 : pattern on
Vcom Adjustment A9 00 Value Range (0x00 ~ 0x7F)
Save Vcom value in
Save Vcom value A8 00 00
EEROM for SVC OSD
OSD pause command E7 A0 00 Stop OSD for DDC
(34UM60-PF.***H***)
51
LM340WW1 SSC1
(34UM69G-BF.***L***)
52
LM340WW1 SJC1
Module selection F6 00
(29UM69G-BF.***H***)
(29UM60-PF.***H***)
53
(29UM59A-PF.***H***)
LM290WW2 SSC1
Copyright © LG Electronics. Inc. All rights reserved. - 12 - LGE Internal Use Only
Only for training and service purposes
HDCP 2.2 read F8 data Read HDCP 2.2 key
Copyright © LG Electronics. Inc. All rights reserved. - 13 - LGE Internal Use Only
Only for training and service purposes
6.5. EEPROM Data Write
6.5.1 Siganl TABLE
START 6E A 50 A 84+n A 03 A CMD A ADH A ADL A
LEN : 84h+Bytes
CMD : E8h
2
ADH : E PROM Slave Address(A0,A2,A4,A6,A8,AA,AC,AE), Not 00h(Reserved by Buffer To EEPROM)
2
ADL : E PROM Sub Address(00~FF)
Data : Write data
Delay : 20ms
2
6.6 E PROM Data Read
6.6.1 Signal TABLE
START 6E A 50 A 84 A 03 A CMD A ADH A ADL A CS A STOP
Delay 150ms
128 Bytes
6.6.2 COMMAND SET
Adjustment contents CMD(hex ADH(hex) ADL(hex) Explanation
No.
)
1 EEPROM READ E7 A0 0 0-Page 0~7F Read
2 80 0-Page 80~FF Read
3 A2 0 1-Page 0~7F Read
Copyright © LG Electronics. Inc. All rights reserved. - 14 - LGE Internal Use Only
Only for training and service purposes
4 80 1-Page 80~FF Read
5 A4 0 2-Page 0~7F Read
6 80 2-Page 80~FF Read
7 A6 0 3-Page 0~7F Read
8 80 3-Page 80~FF Read
9 A8 0 4-Page 0~7F Read
10 80 4-Page 80~FF Read
11 AA 0 5-Page 0~7F Read
12 80 5-Page 80~FF Read
13 AC 0 6-Page 0~7F Read
14 80 6-Page 80~FF Read
15 AE 0 7-Page 0~7F Read
16 80 7-Page 80~FF Read
6.6.3 Use
2
Read E PROM’s specific area as unit of 128(80h)-byte. ( 84h )
6.6.4 EDID Write
EEPROM access by using DDC2B protocol
1-Byte write
START A0 A L A D A STOP
L: 0x00~0x7F
D : data
8-byte write
START A0 A L A Data1 A …. A Data8 A STOP
L : 0x00,0x10,….0x70
6.6.5 EDID Read
DDC2B Command.(A0/A1)
START A0 A 00 START A1 A Data1 ... Data128 A CS A STOP
- 128 Byte transfer of EDID Buffer of MICOM
Copyright © LG Electronics. Inc. All rights reserved. - 15 - LGE Internal Use Only
Only for training and service purposes
BLOCK DIAGRAM
141.5
156 1
Copyright © LG Electronics. Inc. All rights reserved. - 16 - LGE Internal Use Only
Only for training and service purposes
EXPLODED VIEW
IMPORTANT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These
parts are identified by in the Schematic Diagram and EXPLODED VIEW.
It is essential that these special safety parts should be replaced with the same c omponents as
recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.
930
920
900
910
400
540
500
600
or
121
120
320
310
330
700
200
300
DISASSEMBLY
Fig.1 Put the MNT on the clean vinyl, disassembly the stand base
Copyright © LG Electronics. Inc. All rights reserved. - 18 - LGE Internal Use Only
Only for training and service purposes
Fig 4 After the disassemble the back cover
Fig 5 Disassemble the Panel LED and LVDS and Auto brightness sensor PCB and disconnect Control PCB speaker
cable wire then take it away
Copyright © LG Electronics. Inc. All rights reserved. - 19 - LGE Internal Use Only
Only for training and service purposes
Fig 6 Disassemble the Main Frame ASSY from the set
N Y
Check Power Replace Power
Check JP800 connector
Voltage Level (12V) Board
OK ?
N
Check IC700
Replace IC700 &
Output
Recheck
Voltage Level (5VS)
Y
N
Check IC801 Output Replace IC801 &
Voltage Level (1.1V, Recheck
3.3V)
Y
N
Check X100 Clock
Replace X100
14.318MHz
Replace IC101
Flash Memory
N N
Check LED Driver Check IC100
Module Back Light
FB Replace Main Scaler IC
On?
(P700 1,6)
Replace T-Con
Board or Module
Check N
JK200,201,202,P20
0 for proper Replace Connector
connection or
Damage
Y
Replace Main
Scaler (IC100)