Professional Documents
Culture Documents
En Iso 6186
En Iso 6186
En Iso 6186
Plastics
Determination of pourability {
(ISO 6186 : 1998)
English version of DIN EN ISO 6186 EN ISO 6186
ICS 83.080.01
European Standard EN ISO 6186 : 1998 has the status of a DIN Standard.
National foreword
This standard has been published in accordance with a decision taken by CEN/TC 249 to adopt, without
alteration, International Standard ISO 6186 as a European Standard.
The responsible German body involved in its preparation was the Normenausschuß Kunststoffe (Plastics
Standards Committee), Technical Committee PVC-Formmassen.
DIN EN ISO 291 is the standard corresponding to International Standard ISO 291 referred to in clause 2 of
the EN.
National Annex NA
Standard referred to
(and not included in Normative references and Annex ZA)
DIN EN ISO 291 Plastics – Standard atmospheres for conditioning and testing (ISO 291 : 1997)
EN comprises 7 pages.
© No part of this standard may be reproduced without the prior permission of Ref. No. DIN EN ISO 6186 : 1998-08
DIN Deutsches Institut für Normung e. V., Berlin. English price group 06 Sales No. 1106
Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).
12.98
EN ISO 6186
June 1998
ICS 83.080.00
Descriptors: Plastics, pourability, testing.
English version
Plastics
Determination of pourability
(ISO 6186 : 1998)
ÈÉË
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
© 1998. CEN – All rights of exploitation in any form and by any means Ref. No. EN ISO 6186 : 1998 E
reserved worldwide for CEN national members.
Page 2
EN ISO 6186 : 1998
Foreword
International Standard
ISO 6186 : 1998 Plastics – Determination of pourability,
which was prepared by ISO/TC 61 ‘Plastics’ of the International Organization for Standardization, has been
adopted by Technical Committee CEN/TC 249 ‘Plastics’, the Secretariat of which is held by IBN, as a European
Standard.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, and conflicting national standards withdrawn, by December 1998 at the latest.
In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-
ing countries are bound to implement this European Standard:
Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 6186 : 1998 was approved by CEN as a European Standard without
any modification.
NOTE: Normative references to international publications are listed in Annex ZA (normative).
Page 3
EN ISO 6186 : 1998
Page 4
EN ISO 6186 : 1998
Page 5
EN ISO 6186 : 1998
Page 6
EN ISO 6186 : 1998
Page 7
EN ISO 6186 : 1998